mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Robert Schwebel <r.schwebel@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 3/3] ARM: i.MX6: tqma6x: dts: remove unused dts file
Date: Fri,  6 Dec 2013 20:17:48 +0100	[thread overview]
Message-ID: <1386357468-26892-4-git-send-email-r.schwebel@pengutronix.de> (raw)
In-Reply-To: <1386357468-26892-1-git-send-email-r.schwebel@pengutronix.de>

The DTS file for MBa6x is imx6q-mba6x.dts, so it looks like this file
doesn't make any sense.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 arch/arm/dts/imx6q-tqma6x.dts | 319 ------------------------------------------
 1 file changed, 319 deletions(-)
 delete mode 100644 arch/arm/dts/imx6q-tqma6x.dts

diff --git a/arch/arm/dts/imx6q-tqma6x.dts b/arch/arm/dts/imx6q-tqma6x.dts
deleted file mode 100644
index f556381..0000000
--- a/arch/arm/dts/imx6q-tqma6x.dts
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright 2013 Sascha Hauer, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-/dts-v1/;
-
-#include "imx6q.dtsi"
-
-/ {
-	model = "TQ TQMa6x";
-	compatible = "tq,tqma6x", "fsl,imx6q";
-
-	chosen {
-		linux,stdout-path = "/soc/aips-bus@02100000/serial@021e8000";
-	};
-
-	memory {
-		reg = <0x10000000 0x40000000>;
-	};
-
-	gpio_buttons: gpio_buttons@0 {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gpiobuttons_1>;
-
-		button@1 {
-			label = "button0";
-			linux,code = <0x100>;
-			gpios = <&gpio7 13 0>;
-		};
-
-		button@2 {
-			label = "button1";
-			linux,code = <0x101>;
-			gpios = <&gpio7 12 0>;
-		};
-
-		button@3 {
-			label = "button2";
-			linux,code = <0x102>;
-			gpios = <&gpio1 8 0>;
-		};
-	};
-};
-
-&can1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can1_1>;
-	status = "okay";
-};
-
-&can2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_can2_1>;
-	status = "okay";
-};
-
-&ecspi1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_ecspi1_1>;
-	fsl,spi-num-chipselects = <1>;
-	cs-gpios = <&gpio3 19 0>;
-	status = "okay";
-
-	flash: m25p80@0 {
-		compatible = "m25p80";
-		spi-max-frequency = <40000000>;
-		reg = <0>;
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
-	phy-mode = "rgmii";
-	status = "disabled";
-};
-
-&hdmi {
-	status = "okay";
-	ddc = <&i2c2>;
-};
-
-&i2c3 {
-	status = "okay";
-	clock-frequency = <100000>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c3_2>;
-
-	pmic: pf0100@08 {
-		compatible = "pf0100-regulator";
-		reg = <0x08>;
-		interrupt-parent = <&gpio6>;
-		interrupts = <10 8>;
-
-		regulators {
-			reg_vddcore: sw1ab {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_vddsoc: sw1c {
-				regulator-min-microvolt = <300000>;
-				regulator-max-microvolt = <1875000>;
-				regulator-always-on;
-			};
-
-			reg_gen_3v3: sw2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5a: sw3a {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_1v5b: sw3b {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_ddr_vtt: sw4 {
-				regulator-min-microvolt = <400000>;
-				regulator-max-microvolt = <1975000>;
-				regulator-always-on;
-			};
-
-			reg_5v_600mA: swbst {
-				regulator-min-microvolt = <5000000>;
-				regulator-max-microvolt = <5150000>;
-				regulator-always-on;
-			};
-
-			reg_snvs_3v: vsnvs {
-				regulator-min-microvolt = <1500000>;
-				regulator-max-microvolt = <3000000>;
-				regulator-always-on;
-			};
-
-			reg_vrefddr: vrefddr {
-				regulator-min-microvolt = <750000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-			};
-
-			reg_vgen1_1v5: vgen1 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				/* not used */
-			};
-
-			reg_vgen2_1v2_eth: vgen2 {
-				regulator-min-microvolt = <800000>;
-				regulator-max-microvolt = <1550000>;
-				regulator-always-on;
-			};
-
-			reg_vgen3_2v8: vgen3 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen4_1v8: vgen4 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen5_1v8_eth: vgen5 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-
-			reg_vgen6_3v3: vgen6 {
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-			};
-		};
-	};
-
-	sensor1: lm75@48 {
-		compatible = "lm75";
-		reg = <0x48>;
-	};
-
-	sensor2: lm75@49 {
-		compatible = "lm75";
-		reg = <0x49>;
-	};
-
-	eeprom: m24c64@50 { /* FIXME: Baseboard */
-		compatible = "st,24c64", "at24";
-		reg = <0x50>;
-	};
-
-};
-
-&iomuxc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_hog>;
-
-	can1 {
-		pinctrl_can1_1: can1grp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
-				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
-			>;
-		};
-	};
-
-	can2 {
-		pinctrl_can2_1: can2grp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
-				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
-			>;
-		};
-	};
-
-	hog {
-		pinctrl_hog: hoggrp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000 /* FEC phy reset */
-				MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x80000000 /* usdhc2 CD */
-				MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* usdhc2 WP */
-				MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* eCSPI1 SS1 */
-				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x80000000 /* PMIC irq */
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000
-			>;
-		};
-	};
-
-	i2c3 {
-		pinctrl_i2c3_2: i2c3grp-2 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
-				MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-			>;
-		};
-	};
-
-	uart2 {
-		pinctrl_uart2_2: uart2grp-2 {
-			fsl,pins = <
-				MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-				MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-			>;
-		};
-	};
-
-	gpiobuttons {
-		pinctrl_gpiobuttons_1: gpiogrp-1 {
-			fsl,pins = <
-				MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000
-				MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000
-				MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x80000000
-			>;
-		};
-	};
-};
-
-&sata {
-	status = "okay";
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_uart2_2>;
-};
-
-&usbh1 {
-	status = "okay";
-	barebox,phy_type = "utmi";
-	disable-over-current;
-};
-
-&usbotg {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
-	phy_type = "utmi";
-	dr_mode = "host";
-	disable-over-current;
-	otg_id_pin_select_change;
-	status = "okay";
-};
-
-&usdhc2 { /* Baseboard Slot */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc2_1>;
-	cd-gpios = <&gpio1 4 0>;
-	wp-gpios = <&gpio1 2 0>;
-	max-frequency = <1000000>;
-	status = "okay";
-};
-
-&usdhc3 { /* eMMC */
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_1>;
-	non-removable;
-	bus-width = <8>;
-	status = "disabled";
-};
-- 
1.8.4.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2013-12-06 19:19 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-06 19:17 DTS patches Robert Schwebel
2013-12-06 19:17 ` [PATCH 1/3] ARM: i.MX6: tqma6x: dts: move FEC enablement to baseboard Robert Schwebel
2013-12-09  8:29   ` Sascha Hauer
2013-12-06 19:17 ` [PATCH 2/3] ARM: i.MX6: tqma6x: dts: get MAC address from OCOTP Robert Schwebel
2013-12-06 19:17 ` Robert Schwebel [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1386357468-26892-4-git-send-email-r.schwebel@pengutronix.de \
    --to=r.schwebel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox