mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <l.stach@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 08/10] ARM: imx6: update DMO RealQ7 DT
Date: Tue,  7 Jan 2014 19:12:54 +0100	[thread overview]
Message-ID: <1389118376-1740-8-git-send-email-l.stach@pengutronix.de> (raw)
In-Reply-To: <1389118376-1740-1-git-send-email-l.stach@pengutronix.de>

From: Lucas Stach <dev@lynxeye.de>

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/dts/imx6q-dmo-realq7.dts | 34 ++++++++++++++++++++++++++++++----
 1 file changed, 30 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/imx6q-dmo-realq7.dts b/arch/arm/dts/imx6q-dmo-realq7.dts
index 5057c0b..f713947 100644
--- a/arch/arm/dts/imx6q-dmo-realq7.dts
+++ b/arch/arm/dts/imx6q-dmo-realq7.dts
@@ -116,7 +116,7 @@
 
 &fec {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_enet_1>;
+	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rgmii";
 	phy-reset-gpios = <&gpio3 23 0>;
 	status = "okay";
@@ -294,6 +294,10 @@
 				MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
 			>;
 		};
+		
+		pinctrl_uart2_1: uart2grp-1 {
+			fsl,pins = <MX6QDL_UART2_PINGRP1>;
+		};
 	};
 
 	pfuze {
@@ -329,6 +333,28 @@
 			>;
 		};
 	};
+	
+	enet {
+		pinctrl_enet: enetgrp {
+			fsl,pins = <MX6QDL_ENET_PINGRP1>;
+		};
+	};
+
+	usb {
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+		};
+	};
+
+	usdhc {
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <MX6QDL_USDHC3_PINGRP_D4>;
+		};
+
+		pinctrl_usdhc4: usdhc4grp {
+			fsl,pins = <MX6QDL_USDHC4_PINGRP_D8>;
+		};
+	};
 };
 
 &sata {
@@ -356,21 +382,21 @@
 &usbotg {
 	vbus-supply = <&reg_usb_otg_vbus>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usbotg_1>;
+	pinctrl-0 = <&pinctrl_usbotg>;
 	disable-over-current;
 	status = "okay";
 };
 
 &usdhc3 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc3_2>;
+	pinctrl-0 = <&pinctrl_usdhc3>;
 	vmmc-supply = <&reg_3p3v>;
 	status = "okay";
 };
 
 &usdhc4 {
 	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usdhc4_1>;
+	pinctrl-0 = <&pinctrl_usdhc4>;
 	vmmc-supply = <&reg_3p3v>;
 	non-removable;
 	bus-width = <8>;
-- 
1.8.4.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-01-07 18:18 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-07 18:12 [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Lucas Stach
2014-01-07 18:12 ` [PATCH 02/10] ARM: imx6q: update sabrelite DT Lucas Stach
2014-01-07 18:12 ` [PATCH 03/10] ARM: imx6: update SabreSD DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 04/10] ARM: imx6: update phytec-pfla02 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 05/10] ARM: imx6: update Carrier-1 DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 06/10] ARM: imx6: update TQ DTs Lucas Stach
2014-01-07 18:12 ` [PATCH 07/10] ARM: imx6: update GK802 DT Lucas Stach
2014-01-07 18:12 ` Lucas Stach [this message]
2014-01-07 18:12 ` [PATCH 09/10] ARM: imx6: update DFI FS700 M60 DT Lucas Stach
2014-01-07 18:12 ` [PATCH 10/10] ARM: imx6: remove old pingroups Lucas Stach
2014-01-10  8:23 ` [PATCH 01/10] ARM: imx6: pull imx6qdl-pingrp.h from linux Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1389118376-1740-8-git-send-email-l.stach@pengutronix.de \
    --to=l.stach@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox