[PATCH 13/22] ARM: dts: Add Phytec phyCARD-i.MX27 devicetree files

[Sascha Hauer <s.hauer@pengutronix.de>]

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/dts/Makefile                       |   2 +
 arch/arm/dts/imx27-phytec-phycard-s-rdk.dts | 139 ++++++++++++++++++++++++++++
 arch/arm/dts/imx27-phytec-phycard-s-som.dts |  60 ++++++++++++
 3 files changed, 201 insertions(+)
 create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
 create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dts

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index bc314e9..4e875c6 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -2,6 +2,8 @@ dtb-$(CONFIG_ARCH_AM33XX) += \
 	am335x-bone.dtb \
 	am335x-boneblack.dtb \
 	am335x-phytec-phycore.dtb
+dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk.dtb \
+	imx27-phytec-phycard-s-som.dtb
 dtb-$(CONFIG_ARCH_IMX51) += imx51-babbage.dtb \
 	imx51-genesi-efika-sb.dtb
 dtb-$(CONFIG_ARCH_IMX53) += imx53-qsb.dtb \
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
new file mode 100644
index 0000000..0d65023
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
@@ -0,0 +1,139 @@
+/*
+ * Copyright 2012 Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx27-phytec-phycard-s-som.dts"
+
+/ {
+	model = "Phytec pca100 rapid development kit";
+	compatible = "phytec,imx27-pca100-rdk", "phytec,imx27-pca100", "fsl,imx27";
+
+	display: display {
+		model = "Primeview-PD050VL1";
+		native-mode = <&timing0>;
+		bits-per-pixel = <16>;  /* non-standard but required */
+		fsl,pcr = <0xf0c88080>;	/* non-standard but required */
+		display-timings {
+			timing0: 640x480 {
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <112>;
+				hfront-porch = <36>;
+				hsync-len = <32>;
+				vback-porch = <33>;
+				vfront-porch = <33>;
+				vsync-len = <2>;
+				clock-frequency = <25000000>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-always-on;
+		};
+	};
+};
+
+&fb {
+	display = <&display>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	adc@64 {
+		compatible = "maxim,max1037";
+		vcc-supply = <&reg_3v3>;
+		reg = <0x64>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-rdk {
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <MX27_I2C2_PINGRP1>;
+		};
+
+		pinctrl_owire1: owire1grp {
+			fsl,pins = <MX27_OWIRE1_PINGRP1>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX27_UART1_PINGRP1
+				MX27_UART1_RTSCTS_PINGRP1
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX27_UART2_PINGRP1
+				MX27_UART2_RTSCTS_PINGRP1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX27_UART3_PINGRP1
+				MX27_UART3_RTSCTS_PINGRP1
+			>;
+		};
+	};
+};
+
+&owire {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_owire1>;
+	status = "okay";
+};
+
+&sdhci2 {
+	cd-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart1 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart2 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	fsl,uart-has-rtscts;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
new file mode 100644
index 0000000..db8c095
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <MX27_FEC1_PINGRP1>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <MX27_I2C2_PINGRP1>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
-- 
1.8.5.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox