From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/3] ARM: dts: Add TQ tqma53/mba53 dts files
Date: Mon, 20 Jan 2014 14:23:54 +0100 [thread overview]
Message-ID: <1390224236-11032-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1390224236-11032-1-git-send-email-s.hauer@pengutronix.de>
Directly taken from Linux-3.13.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/Makefile | 3 +-
arch/arm/dts/imx53-mba53.dts | 236 +++++++++++++++++++++++++++++++++++++++++
arch/arm/dts/imx53-tqma53.dtsi | 183 ++++++++++++++++++++++++++++++++
3 files changed, 421 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/dts/imx53-mba53.dts
create mode 100644 arch/arm/dts/imx53-tqma53.dtsi
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 142b3e2..189394b 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -6,7 +6,8 @@ dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk.dtb \
imx27-phytec-phycard-s-som.dtb
dtb-$(CONFIG_ARCH_IMX51) += imx51-babbage.dtb \
imx51-genesi-efika-sb.dtb
-dtb-$(CONFIG_ARCH_IMX53) += imx53-qsb.dtb \
+dtb-$(CONFIG_ARCH_IMX53) += imx53-mba53.dtb \
+ imx53-qsb.dtb \
imx53-qsrb.dtb \
imx53-voipac-bsb.dtb
dtb-$(CONFIG_ARCH_IMX6) += imx6q-gk802.dtb \
diff --git a/arch/arm/dts/imx53-mba53.dts b/arch/arm/dts/imx53-mba53.dts
new file mode 100644
index 0000000..a630902
--- /dev/null
+++ b/arch/arm/dts/imx53-mba53.dts
@@ -0,0 +1,236 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx53-tqma53.dtsi"
+
+/ {
+ model = "TQ MBa53 starter kit";
+ compatible = "tq,mba53", "tq,tqma53", "fsl,imx53";
+
+ reg_backlight: fixed@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-supply";
+ gpio = <&gpio2 5 0>;
+ startup-delay-us = <5000>;
+ enable-active-low;
+ };
+
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 50000>;
+ brightness-levels = <0 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 88 92 96 100>;
+ default-brightness-level = <10>;
+ enable-gpios = <&gpio7 7 0>;
+ power-supply = <®_backlight>;
+ };
+
+ disp1: display@disp1 {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_disp1_1>;
+ crtcs = <&ipu 1>;
+ interface-pix-fmt = "rgb24";
+ status = "disabled";
+ };
+
+ reg_3p2v: 3p2v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "tq,imx53-mba53-sgtl5000",
+ "fsl,imx-audio-sgtl5000";
+ model = "imx53-mba53-sgtl5000";
+ ssi-controller = <&ssi2>;
+ audio-codec = <&codec>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ mux-int-port = <2>;
+ mux-ext-port = <5>;
+ };
+};
+
+&ldb {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvds1_1>;
+ status = "disabled";
+};
+
+&iomuxc {
+ lvds1 {
+ pinctrl_lvds1_1: lvds1-grp1 {
+ fsl,pins = <
+ MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
+ MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK 0x80000000
+ MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2 0x80000000
+ MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1 0x80000000
+ MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0 0x80000000
+ >;
+ };
+
+ pinctrl_lvds1_2: lvds1-grp2 {
+ fsl,pins = <
+ MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3 0x80000000
+ MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2 0x80000000
+ MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK 0x80000000
+ MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1 0x80000000
+ MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0 0x80000000
+ >;
+ };
+ };
+
+ disp1 {
+ pinctrl_disp1_1: disp1-grp1 {
+ fsl,pins = <
+ MX53_PAD_EIM_A16__IPU_DI1_DISP_CLK 0x80000000 /* DISP1_CLK */
+ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x80000000 /* DISP1_DRDY */
+ MX53_PAD_EIM_D23__IPU_DI1_PIN2 0x80000000 /* DISP1_HSYNC */
+ MX53_PAD_EIM_EB3__IPU_DI1_PIN3 0x80000000 /* DISP1_VSYNC */
+ MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 0x80000000
+ MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 0x80000000
+ MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 0x80000000
+ MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 0x80000000
+ MX53_PAD_EIM_A24__IPU_DISP1_DAT_19 0x80000000
+ MX53_PAD_EIM_A23__IPU_DISP1_DAT_18 0x80000000
+ MX53_PAD_EIM_A22__IPU_DISP1_DAT_17 0x80000000
+ MX53_PAD_EIM_A21__IPU_DISP1_DAT_16 0x80000000
+ MX53_PAD_EIM_A20__IPU_DISP1_DAT_15 0x80000000
+ MX53_PAD_EIM_A19__IPU_DISP1_DAT_14 0x80000000
+ MX53_PAD_EIM_A18__IPU_DISP1_DAT_13 0x80000000
+ MX53_PAD_EIM_A17__IPU_DISP1_DAT_12 0x80000000
+ MX53_PAD_EIM_EB0__IPU_DISP1_DAT_11 0x80000000
+ MX53_PAD_EIM_EB1__IPU_DISP1_DAT_10 0x80000000
+ MX53_PAD_EIM_DA0__IPU_DISP1_DAT_9 0x80000000
+ MX53_PAD_EIM_DA1__IPU_DISP1_DAT_8 0x80000000
+ MX53_PAD_EIM_DA2__IPU_DISP1_DAT_7 0x80000000
+ MX53_PAD_EIM_DA3__IPU_DISP1_DAT_6 0x80000000
+ MX53_PAD_EIM_DA4__IPU_DISP1_DAT_5 0x80000000
+ MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 0x80000000
+ MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 0x80000000
+ MX53_PAD_EIM_DA7__IPU_DISP1_DAT_2 0x80000000
+ MX53_PAD_EIM_DA8__IPU_DISP1_DAT_1 0x80000000
+ MX53_PAD_EIM_DA9__IPU_DISP1_DAT_0 0x80000000
+ >;
+ };
+ };
+
+ tve {
+ pinctrl_vga_sync_1: vgasync-grp1 {
+ fsl,pins = <
+ /* VGA_VSYNC, HSYNC with max drive strength */
+ MX53_PAD_EIM_CS1__IPU_DI1_PIN6 0xe6
+ MX53_PAD_EIM_DA15__IPU_DI1_PIN4 0xe6
+ >;
+ };
+ };
+};
+
+&cspi {
+ status = "okay";
+};
+
+&audmux {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_1>;
+};
+
+&i2c2 {
+ codec: sgtl5000@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0x0a>;
+ clocks = <&clks 150>;
+ VDDA-supply = <®_3p2v>;
+ VDDIO-supply = <®_3p2v>;
+ };
+
+ expander: pca9554@20 {
+ compatible = "pca9554";
+ reg = <0x20>;
+ interrupts = <109>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+
+ sensor2: lm75@49 {
+ compatible = "lm75";
+ reg = <0x49>;
+ };
+};
+
+&fec {
+ phy-reset-gpios = <&gpio7 6 0>;
+ status = "okay";
+};
+
+&esdhc2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&ecspi1 {
+ status = "okay";
+};
+
+&usbotg {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbh1 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&ssi2 {
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&can1 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+};
+
+&tve {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_vga_sync_1>;
+ ddc = <&i2c3>;
+ fsl,tve-mode = "vga";
+ fsl,hsync-pin = <4>;
+ fsl,vsync-pin = <6>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx53-tqma53.dtsi b/arch/arm/dts/imx53-tqma53.dtsi
new file mode 100644
index 0000000..abd72af
--- /dev/null
+++ b/arch/arm/dts/imx53-tqma53.dtsi
@@ -0,0 +1,183 @@
+/*
+ * Copyright 2012 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "imx53.dtsi"
+
+/ {
+ model = "TQ TQMa53";
+ compatible = "tq,tqma53", "fsl,imx53";
+
+ memory {
+ reg = <0x70000000 0x40000000>; /* Up to 1GiB */
+ };
+
+ regulators {
+ compatible = "simple-bus";
+
+ reg_3p3v: 3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+};
+
+&esdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc2_1>,
+ <&pinctrl_tqma53_esdhc2_2>;
+ vmmc-supply = <®_3p3v>;
+ wp-gpios = <&gpio1 2 0>;
+ cd-gpios = <&gpio1 4 0>;
+ status = "disabled";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_2>;
+ status = "disabled";
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1_1>;
+ fsl,spi-num-chipselects = <4>;
+ cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>,
+ <&gpio3 24 0>, <&gpio3 25 0>;
+ status = "disabled";
+};
+
+&esdhc3 { /* EMMC */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc3_1>;
+ vmmc-supply = <®_3p3v>;
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ esdhc2_2 {
+ pinctrl_tqma53_esdhc2_2: esdhc2-tqma53-grp2 {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x80000000 /* SD2_CD */
+ MX53_PAD_GPIO_2__GPIO1_2 0x80000000 /* SD2_WP */
+ >;
+ };
+ };
+
+ i2s {
+ pinctrl_i2s_1: i2s-grp1 {
+ fsl,pins = <
+ MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x80000000 /* I2S_SCLK */
+ MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x80000000 /* I2S_DOUT */
+ MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x80000000 /* I2S_LRCLK */
+ MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x80000000 /* I2S_DIN */
+ >;
+ };
+ };
+
+ hog {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 /* SSI_MCLK */
+ MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000 /* LCD_BLT_EN */
+ MX53_PAD_PATA_DA_2__GPIO7_8 0x80000000 /* LCD_RESET */
+ MX53_PAD_PATA_DATA5__GPIO2_5 0x80000000 /* LCD_POWER */
+ MX53_PAD_PATA_DATA6__GPIO2_6 0x80000000 /* PMIC_INT */
+ MX53_PAD_PATA_DATA14__GPIO2_14 0x80000000 /* CSI_RST */
+ MX53_PAD_PATA_DATA15__GPIO2_15 0x80000000 /* CSI_PWDN */
+ MX53_PAD_GPIO_19__GPIO4_5 0x80000000 /* #SYSTEM_DOWN */
+ MX53_PAD_GPIO_3__GPIO1_3 0x80000000
+ MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 /* #PHY_RESET */
+ MX53_PAD_GPIO_1__PWM2_PWMO 0x80000000 /* LCD_CONTRAST */
+ >;
+ };
+ };
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1_2>;
+ fsl,uart-has-rtscts;
+ status = "disabled";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_1>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_2>;
+ status = "disabled";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2_1>;
+ status = "disabled";
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_1>;
+ status = "disabled";
+};
+
+&cspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_cspi_1>;
+ fsl,spi-num-chipselects = <3>;
+ cs-gpios = <&gpio1 18 0>, <&gpio1 19 0>,
+ <&gpio1 21 0>;
+ status = "disabled";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_1>;
+ status = "okay";
+
+ pmic: mc34708@8 {
+ compatible = "fsl,mc34708";
+ reg = <0x8>;
+ fsl,mc13xxx-uses-rtc;
+ interrupt-parent = <&gpio2>;
+ interrupts = <6 4>; /* PATA_DATA6, active high */
+ };
+
+ sensor1: lm75@48 {
+ compatible = "lm75";
+ reg = <0x48>;
+ };
+
+ eeprom: 24c64@50 {
+ compatible = "at,24c64";
+ pagesize = <32>;
+ reg = <0x50>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec_1>;
+ phy-mode = "rmii";
+ status = "disabled";
+};
--
1.8.5.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-01-20 13:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-01-20 13:23 TQ tqma53 devicetree support Sascha Hauer
2014-01-20 13:23 ` Sascha Hauer [this message]
2014-01-20 13:23 ` [PATCH 2/3] ARM: dts: i.MX53: tqma53: Add barebox specifics Sascha Hauer
2014-01-20 18:25 ` Alexander Aring
2014-01-21 8:17 ` Sascha Hauer
2014-01-22 6:33 ` Sascha Hauer
2014-01-22 9:41 ` Alexander Aring
2014-01-20 13:23 ` [PATCH 3/3] ARM: i.MX53: tqma53: Switch to devicetree and multiboard support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1390224236-11032-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox