mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/15] ARM: dts: Karo TX25: add barebox specifics
Date: Fri, 31 Jan 2014 15:23:21 +0100	[thread overview]
Message-ID: <1391178204-20889-13-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1391178204-20889-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/dts/imx25-karo-tx25.dts | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm/dts/imx25-karo-tx25.dts b/arch/arm/dts/imx25-karo-tx25.dts
index 182704e..d661463 100644
--- a/arch/arm/dts/imx25-karo-tx25.dts
+++ b/arch/arm/dts/imx25-karo-tx25.dts
@@ -16,6 +16,15 @@
 	model = "Ka-Ro TX25";
 	compatible = "karo,imx25-tx25", "fsl,imx25";
 
+	chosen {
+		linux,stdout-path = &uart1;
+
+		environment@0 {
+			compatible = "barebox,environment";
+			device-path = &nfc, "partname:environment";
+		};
+	};
+
 	regulators {
 		compatible = "simple-bus";
 		#address-cells = <1>;
@@ -98,11 +107,37 @@
 	status = "okay";
 };
 
+&iim {
+	barebox,provide-mac-address = <&fec 0 26>;
+};
+
 &nfc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_nfc>;
+	#address-cells = <1>;
+	#size-cells = <1>;
 	nand-on-flash-bbt;
 	nand-ecc-mode = "hw";
 	nand-bus-width = <8>;
 	status = "okay";
+
+	partition@0 {
+		label = "boot";
+		reg = <0x0 0x80000>;
+	};
+
+	partition@1 {
+		label = "environment";
+		reg = <0x80000 0x80000>;
+	};
+
+	partition@2 {
+		label = "kernel";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@3 {
+		label = "root";
+		reg = <0x500000 0x7b00000>;
+	};
 };
-- 
1.8.5.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-01-31 14:24 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-01-31 14:23 i.MX25 devicetree support Sascha Hauer
2014-01-31 14:23 ` [PATCH 01/15] mci: imx-esdhc: Add i.MX25 compatible entry Sascha Hauer
2014-01-31 14:23 ` [PATCH 02/15] ARM: dts: Add i.MX25 devicetree files Sascha Hauer
2014-01-31 14:23 ` [PATCH 03/15] ARM: dts: i.MX25: Add mmc aliases Sascha Hauer
2014-01-31 14:23 ` [PATCH 04/15] ARM: dts: i.MX25: remove disabled status of usbmisc unit Sascha Hauer
2014-01-31 14:23 ` [PATCH 05/15] ARM: i.MX25: Add missing GPT clock lookups Sascha Hauer
2014-01-31 14:23 ` [PATCH 06/15] ARM: dts: Add i.MX25 Karo TX25 dts Sascha Hauer
2014-01-31 14:23 ` [PATCH 07/15] ARM: dts: i.MX25: Add iram to devicetree Sascha Hauer
2014-01-31 14:23 ` [PATCH 08/15] ARM: dts: Karo TX25: Add pinctrl nodes Sascha Hauer
2014-01-31 14:23 ` [PATCH 09/15] ARM: dts: Karo TX25: Add phy-reset-gpio Sascha Hauer
2014-01-31 14:23 ` [PATCH 10/15] ARM: dts: Karo TX25: add missing nfc properties Sascha Hauer
2014-01-31 14:23 ` [PATCH 11/15] ARM: dts: Karo TX25: add phy supply for fec Sascha Hauer
2014-01-31 14:23 ` Sascha Hauer [this message]
2014-01-31 14:23 ` [PATCH 13/15] ARM: i.MX25: Karo TX25: Switch to devicetree support Sascha Hauer
2014-01-31 14:35   ` Alexander Shiyan
2014-02-01 18:13     ` Sascha Hauer
2014-02-01 18:24       ` Alexander Shiyan
2014-02-01 18:37         ` Sascha Hauer
2014-01-31 14:23 ` [PATCH 14/15] ARM: i.MX: cleanup bootmode selection Sascha Hauer
2014-01-31 14:23 ` [PATCH 15/15] ARM: i.MX: Karo TX25: Switch to multiboard support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1391178204-20889-13-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox