* PWM patches
@ 2014-02-13 10:00 Sascha Hauer
2014-02-13 10:00 ` [PATCH 1/5] PWM: Use a separate device for PWMs Sascha Hauer
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
This adds a logical device to the pwm chip so that users no longer
interact with the hardware device. Also adds an i.MX PWM driver.
Sascha
----------------------------------------------------------------
Sascha Hauer (5):
PWM: Use a separate device for PWMs
PWM: pxa: use pwmx as devname
ARM: i.MX6: Add PWM clk lookups
ARM: dts: i.MX6: Add pwm aliases
PWM: Add i.MX PWM driver
arch/arm/dts/imx6qdl.dtsi | 4 +
arch/arm/mach-imx/clk-imx6.c | 4 +
drivers/pwm/Kconfig | 6 +
drivers/pwm/Makefile | 3 +-
drivers/pwm/core.c | 20 +++-
drivers/pwm/pwm-imx.c | 269 +++++++++++++++++++++++++++++++++++++++++++
drivers/pwm/pxa_pwm.c | 2 +-
7 files changed, 301 insertions(+), 7 deletions(-)
create mode 100644 drivers/pwm/pwm-imx.c
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/5] PWM: Use a separate device for PWMs
2014-02-13 10:00 PWM patches Sascha Hauer
@ 2014-02-13 10:00 ` Sascha Hauer
2014-02-13 10:00 ` [PATCH 2/5] PWM: pxa: use pwmx as devname Sascha Hauer
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
Instead of directly using the hardware devicet for PWMs register
a logical PWM device so that the user operates on pwmx devices rather
than pxa-pwmx.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/pwm/core.c | 20 +++++++++++++++-----
1 file changed, 15 insertions(+), 5 deletions(-)
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index f769cfe..f2b062e 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -26,7 +26,8 @@ struct pwm_device {
#define FLAG_REQUESTED 0
#define FLAG_ENABLED 1
struct list_head node;
- struct device_d *dev;
+ struct device_d *hwdev;
+ struct device_d dev;
unsigned int duty_ns;
unsigned int period_ns;
@@ -79,27 +80,36 @@ int pwmchip_add(struct pwm_chip *chip, struct device_d *dev)
{
struct pwm_device *pwm;
struct param_d *p;
+ int ret;
if (_find_pwm(chip->devname))
return -EBUSY;
pwm = xzalloc(sizeof(*pwm));
pwm->chip = chip;
- pwm->dev = dev;
+ pwm->hwdev = dev;
+
+ strcpy(pwm->dev.name, chip->devname);
+ pwm->dev.id = DEVICE_ID_SINGLE;
+ pwm->dev.parent = dev;
+
+ ret = register_device(&pwm->dev);
+ if (ret)
+ return ret;
list_add_tail(&pwm->node, &pwm_list);
- p = dev_add_param_int(dev, "duty_ns", set_duty_period_ns,
+ p = dev_add_param_int(&pwm->dev, "duty_ns", set_duty_period_ns,
NULL, &pwm->chip->duty_ns, "%u", pwm);
if (IS_ERR(p))
return PTR_ERR(p);
- p = dev_add_param_int(dev, "period_ns", set_duty_period_ns,
+ p = dev_add_param_int(&pwm->dev, "period_ns", set_duty_period_ns,
NULL, &pwm->chip->period_ns, "%u", pwm);
if (IS_ERR(p))
return PTR_ERR(p);
- p = dev_add_param_bool(dev, "enable", set_enable,
+ p = dev_add_param_bool(&pwm->dev, "enable", set_enable,
NULL, &pwm->p_enable, pwm);
if (IS_ERR(p))
return PTR_ERR(p);
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/5] PWM: pxa: use pwmx as devname
2014-02-13 10:00 PWM patches Sascha Hauer
2014-02-13 10:00 ` [PATCH 1/5] PWM: Use a separate device for PWMs Sascha Hauer
@ 2014-02-13 10:00 ` Sascha Hauer
2014-02-13 10:00 ` [PATCH 3/5] ARM: i.MX6: Add PWM clk lookups Sascha Hauer
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/pwm/pxa_pwm.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/pwm/pxa_pwm.c b/drivers/pwm/pxa_pwm.c
index 8e22d49..8b2ebe4 100644
--- a/drivers/pwm/pxa_pwm.c
+++ b/drivers/pwm/pxa_pwm.c
@@ -133,7 +133,7 @@ static int pxa_pwm_probe(struct device_d *dev)
struct pxa_pwm_chip *chip;
chip = xzalloc(sizeof(*chip));
- chip->chip.devname = asprintf("%s", dev_name(dev));
+ chip->chip.devname = asprintf("pwm%d", dev->id);
chip->chip.ops = &pxa_pwm_ops;
chip->iobase = dev_request_mem_region(dev, 0);
chip->id = dev->id;
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/5] ARM: i.MX6: Add PWM clk lookups
2014-02-13 10:00 PWM patches Sascha Hauer
2014-02-13 10:00 ` [PATCH 1/5] PWM: Use a separate device for PWMs Sascha Hauer
2014-02-13 10:00 ` [PATCH 2/5] PWM: pxa: use pwmx as devname Sascha Hauer
@ 2014-02-13 10:00 ` Sascha Hauer
2014-02-13 10:00 ` [PATCH 4/5] ARM: dts: i.MX6: Add pwm aliases Sascha Hauer
2014-02-13 10:00 ` [PATCH 5/5] PWM: Add i.MX PWM driver Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-imx/clk-imx6.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/mach-imx/clk-imx6.c b/arch/arm/mach-imx/clk-imx6.c
index c32b6cc..d4de737 100644
--- a/arch/arm/mach-imx/clk-imx6.c
+++ b/arch/arm/mach-imx/clk-imx6.c
@@ -305,6 +305,10 @@ static int imx6_ccm_probe(struct device_d *dev)
clkdev_add_physbase(clks[usbphy1], MX6_USBPHY1_BASE_ADDR, NULL);
clkdev_add_physbase(clks[usbphy2], MX6_USBPHY2_BASE_ADDR, NULL);
clkdev_add_physbase(clks[enfc_podf], MX6_GPMI_BASE_ADDR, NULL);
+ clkdev_add_physbase(clks[ipg_per], MX6_PWM1_BASE_ADDR, "per");
+ clkdev_add_physbase(clks[ipg_per], MX6_PWM2_BASE_ADDR, "per");
+ clkdev_add_physbase(clks[ipg_per], MX6_PWM3_BASE_ADDR, "per");
+ clkdev_add_physbase(clks[ipg_per], MX6_PWM4_BASE_ADDR, "per");
writel(0xffffffff, ccm_base + CCGR0);
writel(0xffffffff, ccm_base + CCGR1);
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 4/5] ARM: dts: i.MX6: Add pwm aliases
2014-02-13 10:00 PWM patches Sascha Hauer
` (2 preceding siblings ...)
2014-02-13 10:00 ` [PATCH 3/5] ARM: i.MX6: Add PWM clk lookups Sascha Hauer
@ 2014-02-13 10:00 ` Sascha Hauer
2014-02-13 10:00 ` [PATCH 5/5] PWM: Add i.MX PWM driver Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx6qdl.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm/dts/imx6qdl.dtsi b/arch/arm/dts/imx6qdl.dtsi
index 735569f..70424d2 100644
--- a/arch/arm/dts/imx6qdl.dtsi
+++ b/arch/arm/dts/imx6qdl.dtsi
@@ -30,6 +30,10 @@
mmc1 = &usdhc2;
mmc2 = &usdhc3;
mmc3 = &usdhc4;
+ pwm0 = &pwm1;
+ pwm1 = &pwm2;
+ pwm2 = &pwm3;
+ pwm3 = &pwm4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 5/5] PWM: Add i.MX PWM driver
2014-02-13 10:00 PWM patches Sascha Hauer
` (3 preceding siblings ...)
2014-02-13 10:00 ` [PATCH 4/5] ARM: dts: i.MX6: Add pwm aliases Sascha Hauer
@ 2014-02-13 10:00 ` Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2014-02-13 10:00 UTC (permalink / raw)
To: barebox
The Kernel driver from Linux-3.13 with some adjustments for
barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/pwm/Kconfig | 6 ++
drivers/pwm/Makefile | 3 +-
drivers/pwm/pwm-imx.c | 269 ++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 277 insertions(+), 1 deletion(-)
create mode 100644 drivers/pwm/pwm-imx.c
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index fc08363..8324d5e 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -16,4 +16,10 @@ config PWM_PXA
This enables PWM support for Intel/Marvell PXA chips, such
as the PXA25x, PXA27x.
+config PWM_IMX
+ bool "i.MX PWM Support"
+ depends on ARCH_IMX
+ help
+ This enables PWM support for Freescale i.MX SoCs
+
endif
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c886bd5..dea9956 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_PWM) += core.o
-obj-$(CONFIG_PWM_PXA) += pxa_pwm.o
\ No newline at end of file
+obj-$(CONFIG_PWM_PXA) += pxa_pwm.o
+obj-$(CONFIG_PWM_IMX) += pwm-imx.o
diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c
new file mode 100644
index 0000000..fa2d68e
--- /dev/null
+++ b/drivers/pwm/pwm-imx.c
@@ -0,0 +1,269 @@
+/*
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Derived from pxa PWM driver by eric miao <eric.miao@marvell.com>
+ */
+
+#include <common.h>
+#include <init.h>
+#include <errno.h>
+#include <io.h>
+#include <pwm.h>
+#include <linux/clk.h>
+#include <asm-generic/div64.h>
+
+/* i.MX1 and i.MX21 share the same PWM function block: */
+
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
+
+#define MX1_PWMC_EN (1 << 4)
+
+/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
+
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR_DBGEN (1 << 22)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
+#define MX3_PWMCR_EN (1 << 0)
+
+struct imx_chip {
+ struct clk *clk_per;
+
+ void __iomem *mmio_base;
+
+ struct pwm_chip chip;
+
+ int (*config)(struct pwm_chip *chip,
+ int duty_ns, int period_ns);
+ void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+#define to_imx_chip(chip) container_of(chip, struct imx_chip, chip)
+
+static int imx_pwm_config_v1(struct pwm_chip *chip,
+ int duty_ns, int period_ns)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+
+ /*
+ * The PWM subsystem allows for exact frequencies. However,
+ * I cannot connect a scope on my device to the PWM line and
+ * thus cannot provide the program the PWM controller
+ * exactly. Instead, I'm relying on the fact that the
+ * Bootloader (u-boot or WinCE+haret) has programmed the PWM
+ * function group already. So I'll just modify the PWM sample
+ * register to follow the ratio of duty_ns vs. period_ns
+ * accordingly.
+ *
+ * This is good enough for programming the brightness of
+ * the LCD backlight.
+ *
+ * The real implementation would divide PERCLK[0] first by
+ * both the prescaler (/1 .. /128) and then by CLKSEL
+ * (/2 .. /16).
+ */
+ u32 max = readl(imx->mmio_base + MX1_PWMP);
+ u32 p = max * duty_ns / period_ns;
+ writel(max - p, imx->mmio_base + MX1_PWMS);
+
+ return 0;
+}
+
+static void imx_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ u32 val;
+
+ val = readl(imx->mmio_base + MX1_PWMC);
+
+ if (enable)
+ val |= MX1_PWMC_EN;
+ else
+ val &= ~MX1_PWMC_EN;
+
+ writel(val, imx->mmio_base + MX1_PWMC);
+}
+
+static int imx_pwm_config_v2(struct pwm_chip *chip,
+ int duty_ns, int period_ns)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ unsigned long long c;
+ unsigned long period_cycles, duty_cycles, prescale;
+ u32 cr;
+
+ c = clk_get_rate(imx->clk_per);
+ c = c * period_ns;
+ do_div(c, 1000000000);
+ period_cycles = c;
+
+ prescale = period_cycles / 0x10000 + 1;
+
+ period_cycles /= prescale;
+ c = (unsigned long long)period_cycles * duty_ns;
+ do_div(c, period_ns);
+ duty_cycles = c;
+
+ /*
+ * according to imx pwm RM, the real period value should be
+ * PERIOD value in PWMPR plus 2.
+ */
+ if (period_cycles > 2)
+ period_cycles -= 2;
+ else
+ period_cycles = 0;
+
+ writel(duty_cycles, imx->mmio_base + MX3_PWMSAR);
+ writel(period_cycles, imx->mmio_base + MX3_PWMPR);
+
+ cr = MX3_PWMCR_PRESCALER(prescale) |
+ MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
+ MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
+
+ if (readl(imx->mmio_base + MX3_PWMCR) & MX3_PWMCR_EN)
+ cr |= MX3_PWMCR_EN;
+
+ writel(cr, imx->mmio_base + MX3_PWMCR);
+
+ return 0;
+}
+
+static void imx_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ u32 val;
+
+ val = readl(imx->mmio_base + MX3_PWMCR);
+
+ if (enable)
+ val |= MX3_PWMCR_EN;
+ else
+ val &= ~MX3_PWMCR_EN;
+
+ writel(val, imx->mmio_base + MX3_PWMCR);
+}
+
+static int imx_pwm_config(struct pwm_chip *chip,
+ int duty_ns, int period_ns)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ int ret;
+
+ ret = imx->config(chip, duty_ns, period_ns);
+
+ return ret;
+}
+
+static int imx_pwm_enable(struct pwm_chip *chip)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+ int ret;
+
+ ret = clk_enable(imx->clk_per);
+ if (ret)
+ return ret;
+
+ imx->set_enable(chip, true);
+
+ return 0;
+}
+
+static void imx_pwm_disable(struct pwm_chip *chip)
+{
+ struct imx_chip *imx = to_imx_chip(chip);
+
+ imx->set_enable(chip, false);
+
+ clk_disable(imx->clk_per);
+}
+
+static struct pwm_ops imx_pwm_ops = {
+ .enable = imx_pwm_enable,
+ .disable = imx_pwm_disable,
+ .config = imx_pwm_config,
+};
+
+struct imx_pwm_data {
+ int (*config)(struct pwm_chip *chip,
+ int duty_ns, int period_ns);
+ void (*set_enable)(struct pwm_chip *chip, bool enable);
+};
+
+static struct imx_pwm_data imx_pwm_data_v1 = {
+ .config = imx_pwm_config_v1,
+ .set_enable = imx_pwm_set_enable_v1,
+};
+
+static struct imx_pwm_data imx_pwm_data_v2 = {
+ .config = imx_pwm_config_v2,
+ .set_enable = imx_pwm_set_enable_v2,
+};
+
+static struct of_device_id imx_pwm_dt_ids[] = {
+ { .compatible = "fsl,imx1-pwm", .data = (unsigned long)&imx_pwm_data_v1, },
+ { .compatible = "fsl,imx27-pwm", .data = (unsigned long)&imx_pwm_data_v2, },
+ { /* sentinel */ }
+};
+
+static int imx_pwm_probe(struct device_d *dev)
+{
+ const struct imx_pwm_data *data;
+ struct imx_chip *imx;
+ int ret = 0;
+
+ ret = dev_get_drvdata(dev, (unsigned long *)&data);
+ if (ret)
+ return ret;
+
+ imx = xzalloc(sizeof(*imx));
+
+ imx->clk_per = clk_get(dev, "per");
+ if (IS_ERR(imx->clk_per))
+ return PTR_ERR(imx->clk_per);
+
+ imx->chip.ops = &imx_pwm_ops;
+ if (dev->device_node) {
+ imx->chip.devname = of_alias_get(dev->device_node);
+ if (!imx->chip.devname) {
+ dev_err(dev, "no alias for pwm\n");
+ return -EINVAL;
+ }
+ } else {
+ imx->chip.devname = asprintf("pwm%d", dev->id);
+ }
+
+ imx->mmio_base = dev_request_mem_region(dev, 0);
+ if (!imx->mmio_base)
+ return -EBUSY;
+
+ imx->config = data->config;
+ imx->set_enable = data->set_enable;
+
+ ret = pwmchip_add(&imx->chip, dev);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static struct driver_d imx_pwm_driver = {
+ .name = "imx-pwm",
+ .of_compatible = imx_pwm_dt_ids,
+ .probe = imx_pwm_probe,
+};
+
+coredevice_platform_driver(imx_pwm_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
--
1.8.5.3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2014-02-13 10:01 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-13 10:00 PWM patches Sascha Hauer
2014-02-13 10:00 ` [PATCH 1/5] PWM: Use a separate device for PWMs Sascha Hauer
2014-02-13 10:00 ` [PATCH 2/5] PWM: pxa: use pwmx as devname Sascha Hauer
2014-02-13 10:00 ` [PATCH 3/5] ARM: i.MX6: Add PWM clk lookups Sascha Hauer
2014-02-13 10:00 ` [PATCH 4/5] ARM: dts: i.MX6: Add pwm aliases Sascha Hauer
2014-02-13 10:00 ` [PATCH 5/5] PWM: Add i.MX PWM driver Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox