From: "Raphaël Poggi" <poggi.raph@gmail.com>
To: barebox@lists.infradead.org
Cc: "Raphaël Poggi" <poggi.raph@gmail.com>
Subject: [PATCH 2/3] ARM: i.MX6: UDOO: Add support of ethernet
Date: Thu, 20 Feb 2014 14:37:00 -0800 [thread overview]
Message-ID: <1392935821-14783-2-git-send-email-poggi.raph@gmail.com> (raw)
In-Reply-To: <1392935821-14783-1-git-send-email-poggi.raph@gmail.com>
Add the support of ethernet in device tree
and board file.
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
---
arch/arm/boards/udoo/board.c | 41 ++++++++++++++++-------------------------
arch/arm/dts/imx6qdl-udoo.dtsi | 11 +++++++++++
2 files changed, 27 insertions(+), 25 deletions(-)
diff --git a/arch/arm/boards/udoo/board.c b/arch/arm/boards/udoo/board.c
index 0a056fb..3846d4b 100644
--- a/arch/arm/boards/udoo/board.c
+++ b/arch/arm/boards/udoo/board.c
@@ -40,28 +40,20 @@
#include <mach/usb.h>
static iomux_v3_cfg_t udoo_enet_gpio_pads_1[] = {
- MX6Q_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_TX_CTL__ENET_RGMII_TX_CTL | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
- MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC | MUX_PAD_CTRL(MX6Q_ENET_PAD_CTRL),
/* RGMII reset */
+ MX6Q_PAD_EIM_D23__GPIO_3_23 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* alimentazione ethernet*/
- MX6Q_PAD_EIM_EB3__GPIO_2_31 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_EIM_EB3__GPIO_2_31 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 32 - 1 - (MODE0) all */
- MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_RGMII_RD0__GPIO_6_25 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 31 - 1 - (MODE1) all */
- MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_RGMII_RD1__GPIO_6_27 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 28 - 1 - (MODE2) all */
- MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_RGMII_RD2__GPIO_6_28 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 27 - 1 - (MODE3) all */
- MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
+ MX6Q_PAD_RGMII_RD3__GPIO_6_29 | MUX_PAD_CTRL(NO_PAD_CTRL),
/* pin 33 - 1 - (CLK125_EN) 125Mhz clockout enabled */
+ MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24 | MUX_PAD_CTRL(NO_PAD_CTRL),
};
static iomux_v3_cfg_t udoo_enet_gpio_pads_2[] = {
@@ -71,7 +63,7 @@ static iomux_v3_cfg_t udoo_enet_gpio_pads_2[] = {
MX6Q_PAD_RGMII_RD1__GPIO_6_27, /* MODE1 */
MX6Q_PAD_RGMII_RD2__GPIO_6_28, /* MODE2 */
MX6Q_PAD_RGMII_RD3__GPIO_6_29, /* MODE3 */
- MX6Q_PAD_RGMII_RX_CTL__GPIO_6_24,
+ MX6Q_PAD_RGMII_RX_CTL__ENET_RGMII_RX_CTL,
};
static int ksz9021rn_phy_fixup(struct phy_device *dev)
@@ -98,21 +90,20 @@ static int ksz9021rn_phy_fixup(struct phy_device *dev)
static int udoo_ksz9021rn_setup(void)
{
+ if (!of_machine_is_compatible("udoo,imx6qdl-udoo"))
+ return 0;
+
mxc_iomux_v3_setup_multiple_pads(udoo_enet_gpio_pads_1,
ARRAY_SIZE(udoo_enet_gpio_pads_1));
gpio_direction_output(IMX_GPIO_NR(2, 31) , 1); /* Power on enet */
/* MODE strap-in pins: advertise all capabilities */
- gpio_direction_output(185, 1); /* GPIO 6-25 */
- gpio_direction_output(187, 1); /* GPIO 6-27 */
- gpio_direction_output(188, 1); /* GPIO 6-28*/
- gpio_direction_output(189, 1); /* GPIO 6-29 */
-
- mdelay(10);
-
- /* Enable 125 MHz clock output */
- gpio_direction_output(184, 1); /* GPIO 6-24 */
+ gpio_direction_output(IMX_GPIO_NR(6, 24), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 25), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 27), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 28), 1);
+ gpio_direction_output(IMX_GPIO_NR(6, 29), 1);
mdelay(100);
diff --git a/arch/arm/dts/imx6qdl-udoo.dtsi b/arch/arm/dts/imx6qdl-udoo.dtsi
index 80ab2f7..8080235 100644
--- a/arch/arm/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/dts/imx6qdl-udoo.dtsi
@@ -61,6 +61,13 @@
};
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
@@ -80,6 +87,10 @@
>;
};
+ pinctrl_enet: enetgrp {
+ fsl,pins = <MX6QDL_ENET_PINGRP_RGMII_MD(0x1b0b0, 0x1b0b0)>;
+ };
+
pinctrl_i2c1: i2c1grp {
fsl,pins = <MX6QDL_I2C1_PINGRP1>;
};
--
1.8.3.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2014-02-20 22:37 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-20 22:36 [PATCH 1/3] ARM: i.MX6: UDOO: rename watchdog function Raphaël Poggi
2014-02-20 22:37 ` Raphaël Poggi [this message]
2014-02-20 22:37 ` [PATCH 3/3] ARM: i.MX6: UDOO: rename UDOO image file Raphaël Poggi
2014-02-24 8:08 ` [PATCH 1/3] ARM: i.MX6: UDOO: rename watchdog function Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1392935821-14783-2-git-send-email-poggi.raph@gmail.com \
--to=poggi.raph@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox