From: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
To: barebox@lists.infradead.org
Cc: Grigory Milev <g.milev@sam-solutions.com>,
Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Subject: [PATCH 1/5] mtd: Update internal API to support 64-bit device size
Date: Mon, 10 Mar 2014 14:39:49 +0300 [thread overview]
Message-ID: <1394451593-3090-1-git-send-email-d.lavnikevich@sam-solutions.com> (raw)
MTD internal API presently uses 32-bit values to represent device
size. This patch updates them to 64-bits but leaves the external API
unchanged.
In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
- printk message formats;
- division and modulus of 64-bit values (mtd_div_by_wb,
mtd_div_by_eb may be used in some of such cases).
Was tested on phyFLEX i.MX6.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
---
commands/nandtest.c | 2 +-
commands/partition.c | 11 ++++++-----
drivers/mtd/core.c | 2 +-
drivers/mtd/devices/m25p80.c | 5 +++--
drivers/mtd/devices/mtd_dataflash.c | 2 +-
drivers/mtd/mtdoob.c | 2 +-
drivers/mtd/mtdraw.c | 2 +-
include/linux/mtd/mtd-abi.h | 12 +++++++++++-
include/linux/mtd/mtd.h | 9 ++++++++-
lib/libmtd.c | 10 +++++-----
10 files changed, 38 insertions(+), 19 deletions(-)
diff --git a/commands/nandtest.c b/commands/nandtest.c
index 0da5444..c64f244 100644
--- a/commands/nandtest.c
+++ b/commands/nandtest.c
@@ -277,7 +277,7 @@ static int do_nandtest(int argc, char *argv[])
}
if (length + flash_offset > meminfo.size) {
printf("Length 0x%08llx + offset 0x%08llx exceeds "
- "device size 0x%08x\n", length,
+ "device size 0x%08llx\n", length,
flash_offset, meminfo.size);
goto err;
}
diff --git a/commands/partition.c b/commands/partition.c
index 6d37471..f825722 100644
--- a/commands/partition.c
+++ b/commands/partition.c
@@ -42,10 +42,11 @@
#define PART_ADD_DEVNAME (1 << 0)
static int mtd_part_do_parse_one(char *devname, const char *partstr,
- char **endp, unsigned long *offset,
- off_t devsize, size_t *retsize, unsigned int pflags)
+ char **endp, loff_t *offset,
+ loff_t devsize, size_t *retsize,
+ unsigned int pflags)
{
- ulong size;
+ loff_t size;
char *end;
char buf[PATH_MAX] = {};
unsigned long flags = 0;
@@ -114,8 +115,8 @@ static int do_addpart(int argc, char *argv[])
{
char *devname;
char *endp;
- unsigned long offset = 0;
- off_t devsize;
+ loff_t offset = 0;
+ loff_t devsize;
struct stat s;
int opt;
unsigned int flags = PART_ADD_DEVNAME;
diff --git a/drivers/mtd/core.c b/drivers/mtd/core.c
index 6db1c6d..7efb03c 100644
--- a/drivers/mtd/core.c
+++ b/drivers/mtd/core.c
@@ -397,7 +397,7 @@ int add_mtd_device(struct mtd_info *mtd, char *devname, int device_id)
mtd->cdev.mtd = mtd;
if (IS_ENABLED(CONFIG_PARAMETER)) {
- dev_add_param_int_ro(&mtd->class_dev, "size", mtd->size, "%u");
+ dev_add_param_int_ro(&mtd->class_dev, "size", mtd->size, "%llu");
dev_add_param_int_ro(&mtd->class_dev, "erasesize", mtd->erasesize, "%u");
dev_add_param_int_ro(&mtd->class_dev, "writesize", mtd->oobsize, "%u");
dev_add_param_int_ro(&mtd->class_dev, "oobsize", mtd->oobsize, "%u");
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 9594011..757a717 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -273,8 +273,9 @@ static int erase_sector(struct m25p *flash, u32 offset, u32 command)
static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct m25p *flash = mtd_to_m25p(mtd);
- u32 addr, len;
+ u32 addr;
uint32_t rem;
+ uint64_t len;
dev_dbg(&flash->spi->dev, "%s at 0x%llx, len %lld\n",
__func__, (long long)instr->addr,
@@ -896,7 +897,7 @@ static int m25p_probe(struct device_d *dev)
flash->mtd.type = MTD_NORFLASH;
flash->mtd.writesize = 1;
flash->mtd.flags = MTD_CAP_NORFLASH;
- flash->mtd.size = info->sector_size * info->n_sectors;
+ flash->mtd.size = (uint64_t)info->sector_size * info->n_sectors;
flash->mtd.erase = m25p80_erase;
flash->mtd.read = m25p80_read;
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index cdc0120..fa31b61 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -625,7 +625,7 @@ add_dataflash_otp(struct spi_device *spi, char *name,
device = &priv->mtd;
device->name = (pdata && pdata->name) ? pdata->name : "dataflash";
- device->size = nr_pages * pagesize;
+ device->size = nr_pages * (uint64_t)pagesize;
device->erasesize = pagesize;
device->writesize = pagesize;
device->type = MTD_DATAFLASH;
diff --git a/drivers/mtd/mtdoob.c b/drivers/mtd/mtdoob.c
index 1e88b53..54888cd 100644
--- a/drivers/mtd/mtdoob.c
+++ b/drivers/mtd/mtdoob.c
@@ -78,7 +78,7 @@ static int add_mtdoob_device(struct mtd_info *mtd, char *devname, void **priv)
mtdoob = xzalloc(sizeof(*mtdoob));
mtdoob->cdev.ops = &mtd_ops_oob;
- mtdoob->cdev.size = (mtd->size / mtd->writesize) * mtd->oobsize;
+ mtdoob->cdev.size = mtd_div_by_wb(mtd->size, mtd) * mtd->oobsize;
mtdoob->cdev.name = asprintf("%s_oob%d", devname, mtd->class_dev.id);
mtdoob->cdev.priv = mtdoob;
mtdoob->cdev.dev = &mtd->class_dev;
diff --git a/drivers/mtd/mtdraw.c b/drivers/mtd/mtdraw.c
index be34723..33ca05d 100644
--- a/drivers/mtd/mtdraw.c
+++ b/drivers/mtd/mtdraw.c
@@ -290,7 +290,7 @@ static int add_mtdraw_device(struct mtd_info *mtd, char *devname, void **priv)
mtdraw->mtd = mtd;
mtdraw->cdev.ops = (struct file_operations *)&mtd_raw_fops;
- mtdraw->cdev.size = mtd->size / mtd->writesize *
+ mtdraw->cdev.size = mtd_div_by_wb(mtd->size, mtd) *
(mtd->writesize + mtd->oobsize);
mtdraw->cdev.name = asprintf("%s.raw", mtd->cdev.name);
mtdraw->cdev.priv = mtdraw;
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 11d51e2..c1ba55b 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -9,6 +9,8 @@
#ifndef DOXYGEN_SHOULD_SKIP_THIS
+#include <asm-generic/div64.h>
+
struct erase_info_user {
uint32_t start;
uint32_t length;
@@ -73,7 +75,7 @@ enum {
struct mtd_info_user {
uint8_t type;
uint32_t flags;
- uint32_t size; // Total size of the MTD
+ uint64_t size; /* Total size of the MTD */
uint32_t erasesize;
uint32_t writesize;
uint32_t oobsize; // Amount of OOB data per block (e.g. 16)
@@ -173,6 +175,14 @@ enum mtd_file_modes {
MTD_MODE_RAW,
};
+
+static inline uint32_t mtd_user_div_by_eb(uint64_t sz,
+ struct mtd_info_user *mtd_user)
+{
+ do_div(sz, mtd_user->erasesize);
+ return sz;
+}
+
#endif /* DOXYGEN_SHOULD_SKIP_THIS */
#endif /* __MTD_ABI_H__ */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 402e497..d337455 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -86,7 +86,7 @@ struct mtd_oob_ops {
struct mtd_info {
u_char type;
u_int32_t flags;
- u_int32_t size; // Total size of the MTD
+ u_int64_t size; /* Total size of the MTD */
/* "Major" erase size for the device. Naïve users may take this
* to be the only erase size available, or may use the more detailed
@@ -253,6 +253,13 @@ static inline uint32_t mtd_mod_by_eb(uint64_t sz, struct mtd_info *mtd)
{
return do_div(sz, mtd->erasesize);
}
+
+static inline uint32_t mtd_div_by_wb(uint64_t sz, struct mtd_info *mtd)
+{
+ do_div(sz, mtd->writesize);
+ return sz;
+}
+
/* Kernel-side ioctl definitions */
extern int add_mtd_device(struct mtd_info *mtd, char *devname, int device_id);
diff --git a/lib/libmtd.c b/lib/libmtd.c
index 1606b87..56672bd 100644
--- a/lib/libmtd.c
+++ b/lib/libmtd.c
@@ -195,7 +195,7 @@ int libmtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
void *buf, int len)
{
int ret, rd = 0;
- off_t seek;
+ loff_t seek;
ret = mtd_valid_erase_block(mtd, eb);
if (ret)
@@ -209,7 +209,7 @@ int libmtd_read(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
}
/* Seek to the beginning of the eraseblock */
- seek = (off_t)eb * mtd->eb_size + offs;
+ seek = (loff_t)eb * mtd->eb_size + offs;
if (lseek(fd, seek, SEEK_SET) != seek)
return sys_errmsg("cannot seek %s to offset %llu",
mtd->node, (unsigned long long)seek);
@@ -229,7 +229,7 @@ int libmtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
void *buf, int len)
{
int ret;
- off_t seek;
+ loff_t seek;
ret = mtd_valid_erase_block(mtd, eb);
if (ret)
@@ -255,7 +255,7 @@ int libmtd_write(const struct mtd_dev_info *mtd, int fd, int eb, int offs,
}
/* Seek to the beginning of the eraseblock */
- seek = (off_t)eb * mtd->eb_size + offs;
+ seek = (loff_t)eb * mtd->eb_size + offs;
if (lseek(fd, seek, SEEK_SET) != seek)
return sys_errmsg("cannot seek %s to offset %llu",
mtd->node, (unsigned long long)seek);
@@ -326,7 +326,7 @@ int mtd_get_dev_info(const char *node, struct mtd_dev_info *mtd)
goto out_close;
}
- mtd->eb_cnt = ui.size / ui.erasesize;
+ mtd->eb_cnt = mtd_user_div_by_eb(ui.size, &ui);
switch(mtd->type) {
case MTD_ABSENT:
--
1.9.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-03-10 11:50 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-10 11:39 Dmitry Lavnikevich [this message]
2014-03-10 11:39 ` [PATCH 2/5] mtd: Support for 4GB partitions Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 3/5] ubi: Fix for creating ubi volumes with 64bit size Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 4/5] nand: mxs: Check for up to 4 NAND chips Dmitry Lavnikevich
2014-03-10 11:39 ` [PATCH 5/5] nand: mxs: Fix for calculating ecc strength on some types of NAND flash Dmitry Lavnikevich
2014-03-12 20:28 ` [PATCH 1/5] mtd: Update internal API to support 64-bit device size Sascha Hauer
2014-03-12 20:51 ` Alexander Aring
2014-03-12 20:53 ` Sascha Hauer
-- strict thread matches above, loose matches on Subject: below --
2014-03-07 11:14 Dmitry Lavnikevich
2014-03-10 7:20 ` Sascha Hauer
2014-03-10 8:02 ` Alexander Aring
2014-03-11 5:29 ` Sascha Hauer
2014-03-11 7:50 ` Alexander Aring
2014-03-12 20:28 ` Sascha Hauer
2014-03-10 11:37 ` Dmitry Lavnikevich
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1394451593-3090-1-git-send-email-d.lavnikevich@sam-solutions.com \
--to=d.lavnikevich@sam-solutions.com \
--cc=barebox@lists.infradead.org \
--cc=g.milev@sam-solutions.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox