From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1WOSCC-0003Hu-Gt for barebox@lists.infradead.org; Fri, 14 Mar 2014 13:30:47 +0000 From: Sascha Hauer Date: Fri, 14 Mar 2014 14:30:20 +0100 Message-Id: <1394803820-29277-7-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1394803820-29277-1-git-send-email-s.hauer@pengutronix.de> References: <1394803820-29277-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 6/6] ARM: pfla02: Set new ethernet phy tx timings To: barebox@lists.infradead.org From: Christian Hemp TX_CLK line is approx. 54mm longer than other TX lines which adds a delay of 0.36ns. RGMII need a delay of min. 1.0ns. This mean we have to add a delay of 0.64ns. We choose 0.78 to have a little gap. This can be done by setting GTX pad skew value to 11100 => Set register 2.8 (RGMII Clock Pad Skew) to 0x038F. Signed-off-by: Christian Hemp --- arch/arm/boards/phytec-phyflex-imx6/board.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boards/phytec-phyflex-imx6/board.c b/arch/arm/boards/phytec-phyflex-imx6/board.c index f510407..3db88da 100644 --- a/arch/arm/boards/phytec-phyflex-imx6/board.c +++ b/arch/arm/boards/phytec-phyflex-imx6/board.c @@ -21,6 +21,9 @@ #include #include #include +#include + +#include #include @@ -36,6 +39,21 @@ static int eth_phy_reset(void) return 0; } +static void mmd_write_reg(struct phy_device *dev, int device, int reg, int val) +{ + phy_write(dev, 0x0d, device); + phy_write(dev, 0x0e, reg); + phy_write(dev, 0x0d, (1 << 14) | device); + phy_write(dev, 0x0e, val); +} + +static int ksz9031rn_phy_fixup(struct phy_device *dev) +{ + mmd_write_reg(dev, 2, 8, 0x039F); + + return 0; +} + static int phytec_pfla02_init(void) { if (!of_machine_is_compatible("phytec,imx6q-pfla02") && @@ -44,6 +62,8 @@ static int phytec_pfla02_init(void) return 0; eth_phy_reset(); + phy_register_fixup_for_uid(PHY_ID_KSZ9031, MICREL_PHY_ID_MASK, + ksz9031rn_phy_fixup); return 0; } -- 1.9.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox