mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Alexander Shiyan <shc_work@mail.ru>
To: barebox@lists.infradead.org
Subject: [PATCH] ARM: i.MX27: dts: Separate barebox-specific DT changes
Date: Sun, 16 Mar 2014 12:27:24 +0400	[thread overview]
Message-ID: <1394958444-32489-1-git-send-email-shc_work@mail.ru> (raw)

To ease DT import from Linux, which is still maintained in-tree, we
separate barebox-specific changes by including the original dts in
a separate DT file. This allows to overlay modifications and keep
clean DT history. Additionally, this patch updates i.MX27 DTS tree.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
 arch/arm/dts/Makefile                          |   3 +-
 arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts |  38 +++++++
 arch/arm/dts/imx27-phytec-phycard-s-rdk.dts    |  39 +++++--
 arch/arm/dts/imx27-phytec-phycard-s-som.dts    | 102 -----------------
 arch/arm/dts/imx27-phytec-phycard-s-som.dtsi   | 103 +++++++++++++++++
 arch/arm/dts/imx27-pingrp.h                    | 151 -------------------------
 arch/arm/dts/imx27.dtsi                        |  59 +++++++++-
 7 files changed, 229 insertions(+), 266 deletions(-)
 create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
 delete mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dts
 create mode 100644 arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
 delete mode 100644 arch/arm/dts/imx27-pingrp.h

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 6bac3b9..8ba31b1 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -3,8 +3,7 @@ dtb-$(CONFIG_ARCH_AM33XX) += \
 	am335x-boneblack.dtb \
 	am335x-phytec-phycore.dtb
 dtb-$(CONFIG_ARCH_IMX25) += imx25-karo-tx25.dtb
-dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk.dtb \
-	imx27-phytec-phycard-s-som.dtb
+dtb-$(CONFIG_ARCH_IMX27) += imx27-phytec-phycard-s-rdk-bb.dtb
 dtb-$(CONFIG_ARCH_IMX51) += imx51-babbage.dtb \
 	imx51-genesi-efika-sb.dtb
 dtb-$(CONFIG_ARCH_IMX53) += imx53-mba53.dtb \
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
new file mode 100644
index 0000000..cecfc5a
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk-bb.dts
@@ -0,0 +1,38 @@
+/*
+ * Barebox specific DT overlay for Phytec PCA100 RDK
+ */
+
+#include "imx27-phytec-phycard-s-rdk.dts"
+
+/ {
+	chosen {
+		linux,stdout-path = &uart1;
+
+		environment@0 {
+			compatible = "barebox,environment";
+			device-path = &nfc, "partname:environment";
+		};
+	};
+};
+
+&nfc {
+	partition@0 {
+		label = "boot";
+		reg = <0x0 0x80000>;
+	};
+
+	partition@1 {
+		label = "environment";
+		reg = <0x80000 0x80000>;
+	};
+
+	partition@2 {
+		label = "kernel";
+		reg = <0x100000 0x400000>;
+	};
+
+	partition@3 {
+		label = "root";
+		reg = <0x500000 0x7b00000>;
+	};
+};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
index fb2b874..3c3964a 100644
--- a/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
+++ b/arch/arm/dts/imx27-phytec-phycard-s-rdk.dts
@@ -9,7 +9,7 @@
  * http://www.gnu.org/copyleft/gpl.html
  */
 
-#include "imx27-phytec-phycard-s-som.dts"
+#include "imx27-phytec-phycard-s-som.dtsi"
 
 / {
 	model = "Phytec pca100 rapid development kit";
@@ -76,35 +76,54 @@
 &iomuxc {
 	imx27-phycard-s-rdk {
 		pinctrl_i2c1: i2c1grp {
-			fsl,pins = <MX27_I2C2_PINGRP1>;
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
 		};
 
 		pinctrl_owire1: owire1grp {
-			fsl,pins = <MX27_OWIRE1_PINGRP1>;
+			fsl,pins = <
+				MX27_PAD_RTCK__OWIRE 0x0
+			>;
 		};
 
 		pinctrl_sdhc2: sdhc2grp {
-			fsl,pins = <MX27_SDHC2_PINGRP1>;
+			fsl,pins = <
+				MX27_PAD_SD2_CLK__SD2_CLK 0x0
+				MX27_PAD_SD2_CMD__SD2_CMD 0x0
+				MX27_PAD_SD2_D0__SD2_D0 0x0
+				MX27_PAD_SD2_D1__SD2_D1 0x0
+				MX27_PAD_SD2_D2__SD2_D2 0x0
+				MX27_PAD_SD2_D3__SD2_D3 0x0
+				MX27_PAD_SSI3_RXDAT__GPIO3_29 0x0 /* CD */
+			>;
 		};
 
 		pinctrl_uart1: uart1grp {
 			fsl,pins = <
-				MX27_UART1_PINGRP1
-				MX27_UART1_RTSCTS_PINGRP1
+				MX27_PAD_UART1_TXD__UART1_TXD 0x0
+				MX27_PAD_UART1_RXD__UART1_RXD 0x0
+				MX27_PAD_UART1_CTS__UART1_CTS 0x0
+				MX27_PAD_UART1_RTS__UART1_RTS 0x0
 			>;
 		};
 
 		pinctrl_uart2: uart2grp {
 			fsl,pins = <
-				MX27_UART2_PINGRP1
-				MX27_UART2_RTSCTS_PINGRP1
+				MX27_PAD_UART2_TXD__UART2_TXD 0x0
+				MX27_PAD_UART2_RXD__UART2_RXD 0x0
+				MX27_PAD_UART2_CTS__UART2_CTS 0x0
+				MX27_PAD_UART2_RTS__UART2_RTS 0x0
 			>;
 		};
 
 		pinctrl_uart3: uart3grp {
 			fsl,pins = <
-				MX27_UART3_PINGRP1
-				MX27_UART3_RTSCTS_PINGRP1
+				MX27_PAD_UART3_TXD__UART3_TXD 0x0
+				MX27_PAD_UART3_RXD__UART3_RXD 0x0
+				MX27_PAD_UART3_CTS__UART3_CTS 0x0
+				MX27_PAD_UART3_RTS__UART3_RTS 0x0
 			>;
 		};
 	};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dts b/arch/arm/dts/imx27-phytec-phycard-s-som.dts
deleted file mode 100644
index a48d4e1..0000000
--- a/arch/arm/dts/imx27-phytec-phycard-s-som.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
- * and Markus Pargmann, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-
-/dts-v1/;
-#include "imx27.dtsi"
-
-/ {
-	model = "Phytec pca100";
-	compatible = "phytec,imx27-pca100", "fsl,imx27";
-
-	chosen {
-		linux,stdout-path = &uart1;
-
-		environment@0 {
-			compatible = "barebox,environment";
-			device-path = &nfc, "partname:environment";
-		};
-	};
-
-	memory {
-		reg = <0xa0000000 0x08000000>; /* 128MB */
-	};
-};
-
-&cspi1 {
-	fsl,spi-num-chipselects = <2>;
-	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
-		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
-	status = "okay";
-};
-
-&iomuxc {
-	imx27-phycard-s-som {
-		pinctrl_fec1: fec1grp {
-			fsl,pins = <MX27_FEC1_PINGRP1>;
-		};
-
-		pinctrl_i2c2: i2c2grp {
-			fsl,pins = <MX27_I2C2_PINGRP1>;
-		};
-
-		pinctrl_nfc: nfcgrp {
-			fsl,pins = <MX27_NFC_PINGRP1>;
-		};
-	};
-};
-
-&fec {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_fec1>;
-	status = "okay";
-};
-
-&i2c2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_i2c2>;
-	status = "okay";
-
-	at24@52 {
-		compatible = "at,24c32";
-		pagesize = <32>;
-		reg = <0x52>;
-	};
-};
-
-&nfc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_nfc>;
-	nand-bus-width = <8>;
-	nand-ecc-mode = "hw";
-	nand-on-flash-bbt;
-	status = "okay";
-
-	partition@0 {
-		label = "boot";
-		reg = <0x0 0x80000>;
-	};
-
-	partition@1 {
-		label = "environment";
-		reg = <0x80000 0x80000>;
-	};
-
-	partition@2 {
-		label = "kernel";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@3 {
-		label = "root";
-		reg = <0x500000 0x7b00000>;
-	};
-};
diff --git a/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi b/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
new file mode 100644
index 0000000..1b62480
--- /dev/null
+++ b/arch/arm/dts/imx27-phytec-phycard-s-som.dtsi
@@ -0,0 +1,103 @@
+/*
+ * Copyright 2012 Sascha Hauer, Uwe Kleine-König, Steffen Trumtrar
+ * and Markus Pargmann, Pengutronix
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx27.dtsi"
+
+/ {
+	model = "Phytec pca100";
+	compatible = "phytec,imx27-pca100", "fsl,imx27";
+
+	memory {
+		reg = <0xa0000000 0x08000000>; /* 128MB */
+	};
+};
+
+&cspi1 {
+	fsl,spi-num-chipselects = <2>;
+	cs-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>,
+		   <&gpio4 27 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1>;
+	status = "okay";
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	at24@52 {
+		compatible = "at,24c32";
+		pagesize = <32>;
+		reg = <0x52>;
+	};
+};
+
+&iomuxc {
+	imx27-phycard-s-som {
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX27_PAD_SD3_CMD__FEC_TXD0 0x0
+				MX27_PAD_SD3_CLK__FEC_TXD1 0x0
+				MX27_PAD_ATA_DATA0__FEC_TXD2 0x0
+				MX27_PAD_ATA_DATA1__FEC_TXD3 0x0
+				MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0
+				MX27_PAD_ATA_DATA3__FEC_RXD1 0x0
+				MX27_PAD_ATA_DATA4__FEC_RXD2 0x0
+				MX27_PAD_ATA_DATA5__FEC_RXD3 0x0
+				MX27_PAD_ATA_DATA6__FEC_MDIO 0x0
+				MX27_PAD_ATA_DATA7__FEC_MDC 0x0
+				MX27_PAD_ATA_DATA8__FEC_CRS 0x0
+				MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0
+				MX27_PAD_ATA_DATA10__FEC_RXD0 0x0
+				MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0
+				MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0
+				MX27_PAD_ATA_DATA13__FEC_COL 0x0
+				MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0
+				MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX27_PAD_I2C2_SDA__I2C2_SDA 0x0
+				MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
+			>;
+		};
+
+		pinctrl_nfc: nfcgrp {
+			fsl,pins = <
+				MX27_PAD_NFRB__NFRB 0x0
+				MX27_PAD_NFCLE__NFCLE 0x0
+				MX27_PAD_NFWP_B__NFWP_B 0x0
+				MX27_PAD_NFCE_B__NFCE_B 0x0
+				MX27_PAD_NFALE__NFALE 0x0
+				MX27_PAD_NFRE_B__NFRE_B 0x0
+				MX27_PAD_NFWE_B__NFWE_B 0x0
+			>;
+		};
+	};
+};
+
+&nfc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_nfc>;
+	nand-bus-width = <8>;
+	nand-ecc-mode = "hw";
+	nand-on-flash-bbt;
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx27-pingrp.h b/arch/arm/dts/imx27-pingrp.h
deleted file mode 100644
index 57ca02f..0000000
--- a/arch/arm/dts/imx27-pingrp.h
+++ /dev/null
@@ -1,151 +0,0 @@
-/*
- * Copyright 2013 Markus Pargmann <mpa@pengutronix.de>, Pengutronix
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#ifndef __DTS_IMX27_PINGRP_H
-#define __DTS_IMX27_PINGRP_H
-
-#include "imx27-pinfunc.h"
-
-#define MX27_CSPI1_PINGRP1 \
-	MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 \
-	MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 \
-	MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0
-
-#define MX27_CSPI2_PINGRP1 \
-	MX27_PAD_CSPI2_MISO__CSPI2_MISO 0x0 \
-	MX27_PAD_CSPI2_MOSI__CSPI2_MOSI 0x0 \
-	MX27_PAD_CSPI2_SCLK__CSPI2_SCLK 0x0
-
-#define MX27_CSPI3_PINGRP1 \
-	MX27_PAD_SD1_CLK__CSPI3_SCLK 0x0 \
-	MX27_PAD_SD1_D0__CSPI3_MISO 0x0 \
-	MX27_PAD_SD1_CMD__CSPI3_MOSI 0x0
-
-#define MX27_FB_PINGRP1 \
-	MX27_PAD_CLS__CLS 0x0 \
-	MX27_PAD_CONTRAST__CONTRAST 0x0 \
-	MX27_PAD_LD0__LD0 0x0 \
-	MX27_PAD_LD1__LD1 0x0 \
-	MX27_PAD_LD2__LD2 0x0 \
-	MX27_PAD_LD3__LD3 0x0 \
-	MX27_PAD_LD4__LD4 0x0 \
-	MX27_PAD_LD5__LD5 0x0 \
-	MX27_PAD_LD6__LD6 0x0 \
-	MX27_PAD_LD7__LD7 0x0 \
-	MX27_PAD_LD8__LD8 0x0 \
-	MX27_PAD_LD9__LD9 0x0 \
-	MX27_PAD_LD10__LD10 0x0 \
-	MX27_PAD_LD11__LD11 0x0 \
-	MX27_PAD_LD12__LD12 0x0 \
-	MX27_PAD_LD13__LD13 0x0 \
-	MX27_PAD_LD14__LD14 0x0 \
-	MX27_PAD_LD15__LD15 0x0 \
-	MX27_PAD_LD16__LD16 0x0 \
-	MX27_PAD_LD17__LD17 0x0 \
-	MX27_PAD_LSCLK__LSCLK 0x0 \
-	MX27_PAD_OE_ACD__OE_ACD 0x0 \
-	MX27_PAD_PS__PS 0x0 \
-	MX27_PAD_REV__REV 0x0 \
-	MX27_PAD_SPL_SPR__SPL_SPR 0x0 \
-	MX27_PAD_HSYNC__HSYNC 0x0 \
-	MX27_PAD_VSYNC__VSYNC 0x0
-
-#define MX27_FEC1_PINGRP1 \
-	MX27_PAD_SD3_CMD__FEC_TXD0 0x0 \
-	MX27_PAD_SD3_CLK__FEC_TXD1 0x0 \
-	MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 \
-	MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 \
-	MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 \
-	MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 \
-	MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 \
-	MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 \
-	MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 \
-	MX27_PAD_ATA_DATA7__FEC_MDC 0x0 \
-	MX27_PAD_ATA_DATA8__FEC_CRS 0x0 \
-	MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 \
-	MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 \
-	MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 \
-	MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 \
-	MX27_PAD_ATA_DATA13__FEC_COL 0x0 \
-	MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 \
-	MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0
-
-#define MX27_I2C1_PINGRP1 \
-	MX27_PAD_I2C_DATA__I2C_DATA 0x0 \
-	MX27_PAD_I2C_CLK__I2C_CLK 0x0
-
-#define MX27_I2C2_PINGRP1 \
-	MX27_PAD_I2C2_SDA__I2C2_SDA 0x0 \
-	MX27_PAD_I2C2_SCL__I2C2_SCL 0x0
-
-#define MX27_NFC_PINGRP1 \
-	MX27_PAD_NFRB__NFRB 0x0 \
-	MX27_PAD_NFCLE__NFCLE 0x0 \
-	MX27_PAD_NFWP_B__NFWP_B 0x0 \
-	MX27_PAD_NFCE_B__NFCE_B 0x0 \
-	MX27_PAD_NFALE__NFALE 0x0 \
-	MX27_PAD_NFRE_B__NFRE_B 0x0 \
-	MX27_PAD_NFWE_B__NFWE_B 0x0
-
-#define MX27_OWIRE1_PINGRP1 \
-	MX27_PAD_RTCK__OWIRE 0x0
-
-#define MX27_PWM_PINGRP1 \
-	MX27_PAD_PWMO__PWMO 0x0
-
-#define MX27_SDHC1_PINGRP1 \
-	MX27_PAD_SD1_CLK__SD1_CLK 0x0 \
-	MX27_PAD_SD1_CMD__SD1_CMD 0x0 \
-	MX27_PAD_SD1_D0__SD1_D0 0x0 \
-	MX27_PAD_SD1_D1__SD1_D1 0x0 \
-	MX27_PAD_SD1_D2__SD1_D2 0x0 \
-	MX27_PAD_SD1_D3__SD1_D3 0x0
-
-#define MX27_SDHC2_PINGRP1 \
-	MX27_PAD_SD2_CLK__SD2_CLK 0x0 \
-	MX27_PAD_SD2_CMD__SD2_CMD 0x0 \
-	MX27_PAD_SD2_D0__SD2_D0 0x0 \
-	MX27_PAD_SD2_D1__SD2_D1 0x0 \
-	MX27_PAD_SD2_D2__SD2_D2 0x0 \
-	MX27_PAD_SD2_D3__SD2_D3 0x0
-
-#define MX27_SDHC3_PINGRP1 \
-	MX27_PAD_SD3_CLK__SD3_CLK 0x0 \
-	MX27_PAD_SD3_CMD__SD3_CMD 0x0 \
-	MX27_PAD_SD3_D0__SD3_D0 0x0 \
-	MX27_PAD_SD3_D1__SD3_D1 0x0 \
-	MX27_PAD_SD3_D2__SD3_D2 0x0 \
-	MX27_PAD_SD3_D3__SD3_D3 0x0
-
-#define MX27_UART1_PINGRP1 \
-	MX27_PAD_UART1_TXD__UART1_TXD 0x0 \
-	MX27_PAD_UART1_RXD__UART1_RXD 0x0
-
-#define MX27_UART1_RTSCTS_PINGRP1 \
-	MX27_PAD_UART1_CTS__UART1_CTS 0x0 \
-	MX27_PAD_UART1_RTS__UART1_RTS 0x0
-
-#define MX27_UART2_PINGRP1 \
-	MX27_PAD_UART2_TXD__UART2_TXD 0x0 \
-	MX27_PAD_UART2_RXD__UART2_RXD 0x0
-
-#define MX27_UART2_RTSCTS_PINGRP1 \
-	MX27_PAD_UART2_CTS__UART2_CTS 0x0 \
-	MX27_PAD_UART2_RTS__UART2_RTS 0x0
-
-#define MX27_UART3_PINGRP1 \
-	MX27_PAD_UART3_TXD__UART3_TXD 0x0 \
-	MX27_PAD_UART3_RXD__UART3_RXD 0x0
-
-#define MX27_UART3_RTSCTS_PINGRP1 \
-	MX27_PAD_UART3_CTS__UART3_CTS 0x0 \
-	MX27_PAD_UART3_RTS__UART3_RTS 0x0
-
-#endif /* __DTS_IMX27_PINGRP_H */
diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
index 7e98966..83a8247 100644
--- a/arch/arm/dts/imx27.dtsi
+++ b/arch/arm/dts/imx27.dtsi
@@ -10,12 +10,13 @@
  */
 
 #include "skeleton.dtsi"
-#include "imx27-pingrp.h"
+#include "imx27-pinfunc.h"
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/gpio/gpio.h>
 
 / {
 	aliases {
+		ethernet0 = &fec;
 		gpio0 = &gpio1;
 		gpio1 = &gpio2;
 		gpio2 = &gpio3;
@@ -70,6 +71,26 @@
 		};
 	};
 
+	usbphy {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usbphy@0 {
+			compatible = "usb-nop-xceiv";
+			reg = <0>;
+			clocks = <&clks 75>;
+			clock-names = "main_clk";
+		};
+
+		usbphy2: usbphy@2 {
+			compatible = "usb-nop-xceiv";
+			reg = <2>;
+			clocks = <&clks 75>;
+			clock-names = "main_clk";
+		};
+	};
+
 	soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -439,6 +460,42 @@
 				iram = <&iram>;
 			};
 
+			usbotg: usb@10024000 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024000 0x200>;
+				interrupts = <56>;
+				clocks = <&clks 15>;
+				fsl,usbmisc = <&usbmisc 0>;
+				fsl,usbphy = <&usbphy0>;
+				status = "disabled";
+			};
+
+			usbh1: usb@10024200 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024200 0x200>;
+				interrupts = <54>;
+				clocks = <&clks 15>;
+				fsl,usbmisc = <&usbmisc 1>;
+				status = "disabled";
+			};
+
+			usbh2: usb@10024400 {
+				compatible = "fsl,imx27-usb";
+				reg = <0x10024400 0x200>;
+				interrupts = <55>;
+				clocks = <&clks 15>;
+				fsl,usbmisc = <&usbmisc 2>;
+				fsl,usbphy = <&usbphy2>;
+				status = "disabled";
+			};
+
+			usbmisc: usbmisc@10024600 {
+				#index-cells = <1>;
+				compatible = "fsl,imx27-usbmisc";
+				reg = <0x10024600 0x200>;
+				clocks = <&clks 62>;
+			};
+
 			sahara2: sahara@10025000 {
 				compatible = "fsl,imx27-sahara";
 				reg = <0x10025000 0x1000>;
-- 
1.8.3.2


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2014-03-16  8:28 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-16  8:27 Alexander Shiyan [this message]
2014-03-17  7:05 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394958444-32489-1-git-send-email-shc_work@mail.ru \
    --to=shc_work@mail.ru \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox