mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v2 09/10] ARM: virt2real: add documentation
Date: Sun, 16 Mar 2014 17:48:20 +0400	[thread overview]
Message-ID: <1394977701-5889-10-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1394977701-5889-1-git-send-email-antonynpavlov@gmail.com>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 Documentation/boards.dox                |  1 +
 arch/arm/boards/virt2real/virt2real.dox | 41 +++++++++++++++++++++++++++++++++
 arch/arm/mach-davinci/mach-davinci.dox  |  2 ++
 3 files changed, 44 insertions(+)

diff --git a/Documentation/boards.dox b/Documentation/boards.dox
index 6bcc14f..9a14aee 100644
--- a/Documentation/boards.dox
+++ b/Documentation/boards.dox
@@ -43,6 +43,7 @@ ARM type:
 @li @subpage tny-a9263
 @li @subpage usb-a9g20-lpw
 @li @subpage usb-a9263
+@li @subpage virt2real
 
 Blackfin type:
 
diff --git a/arch/arm/boards/virt2real/virt2real.dox b/arch/arm/boards/virt2real/virt2real.dox
new file mode 100644
index 0000000..fc38321
--- /dev/null
+++ b/arch/arm/boards/virt2real/virt2real.dox
@@ -0,0 +1,41 @@
+/** @page virt2real virt2real board
+
+virt2real is a is a miniature board for creation of WiFi
+or internet controllable smart devices.
+
+The board has
+@li TI DaVinchi DM365 running at 300 MHz
+@li 128 MiB DDR2 SDRAM;
+@li 256 MiB NAND Flash Memory;
+@li 2 x UART serial interfaces;
+@li 2 x Ethernet interfaces;
+@li 1 x USB interface;
+@li microSD card slot.
+
+The board uses U-Boot as bootloader.
+
+Barebox mini-howto:
+
+1. Connect to the boards's UART0 (115200 8N1);
+Use J2.2 (GND), J2.4 (UART0_TXD), J2.6(UART0_RXD) pins.
+
+2. Turn board's power on;
+
+3. Wait 'Hit any key to stop autoboot' prompt and press the space key.
+
+4. Upload barebox.bin via Ymodem
+@verbatim
+    virt2real ># loady
+@endverbatim
+
+5. Run barebox
+@verbatim
+    virt2real ># go 0x82000000
+@endverbatim
+
+virt2real links:
+@li http://virt2real.com/
+@li http://wiki.virt2real.ru/
+@li https://github.com/virt2real
+
+*/
diff --git a/arch/arm/mach-davinci/mach-davinci.dox b/arch/arm/mach-davinci/mach-davinci.dox
index f0f3a92..789eacc 100644
--- a/arch/arm/mach-davinci/mach-davinci.dox
+++ b/arch/arm/mach-davinci/mach-davinci.dox
@@ -2,4 +2,6 @@
 
 @section davinci_boards DaVinci-based boards
 
+@li @subpage virt2real
+
 */
-- 
1.9.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-03-16 13:49 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-03-16 13:48 [PATCH v2 00/10] ARM: initial support for TI DaVinci SoCs and virt2real board Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 01/10] import _AC and UL macros from linux kernel Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 02/10] ARM: initial support for TI DaVinci SoCs Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 03/10] ARM: davinci: add DEBUG_LL support Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 04/10] ARM: davinci: add clocksource Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 05/10] gpio: add driver for TI DaVinci SoCs Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 06/10] ARM: dts: Add TI TMS320DM365 devicetree file Antony Pavlov
2014-03-18 16:54   ` Sascha Hauer
2014-03-16 13:48 ` [PATCH v2 07/10] ARM: davinci: add documentation Antony Pavlov
2014-03-16 13:48 ` [PATCH v2 08/10] ARM: davinci: add virt2real board support Antony Pavlov
2014-03-18 16:56   ` Sascha Hauer
2014-03-16 13:48 ` Antony Pavlov [this message]
2014-03-16 13:48 ` [PATCH v2 10/10] ARM: davinci: add virt2real_defconfig Antony Pavlov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1394977701-5889-10-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox