mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 00/18] Tegra 3 support
@ 2014-04-13 13:27 Lucas Stach
  2014-04-13 13:27 ` [PATCH 01/18] gpio: tegra: remove dead code Lucas Stach
                   ` (18 more replies)
  0 siblings, 19 replies; 20+ messages in thread
From: Lucas Stach @ 2014-04-13 13:27 UTC (permalink / raw)
  To: barebox

Ok, this one took me a little longer than I would
have wished for, but now it's good enough to post.

This series adds support for the Tegra 3 line of
SoCs. This includes a clock driver that sets up the
PLLs and peripheral clocks and a pinctrl driver to
bring the external muxing into a sane state.

There is still a lot to do here, but with this
series barebox starts up on an NVidia Beaver board
and the eMMC is usable.

Next step would be to integrate BCT writing into
the Tegra image process so barebox is able to write
itself to MMC as a bootable image.

Lucas Stach (18):
  gpio: tegra: remove dead code
  mmc: tegra: fix typo
  tegra: disable more lowlevel unsafe switch optimizations
  tegra: source MSELECT clock from CLK_M
  tegra: add Tegra3 kconfig symbol
  tegra: add Tegra3 ramsize detection
  tegra: add Tegra3 mem initcall
  tegra: recognize T30 in debug UART code
  dt-bindings: add pinctrl-tegra.h
  pinctrl: tegra: add Tegra3 driver
  dt-bindings: add tegra30-car.h
  clk: tegra: consider new T30 clock registers
  clk: tegra: add Tegra3 driver
  gpio: tegra: add Tegra3 setup
  ARM: tegra: add basic Tegra3 DT
  ARM: tegra: add NVidia Beaver board support
  ARM: dts: tegra: add full Beaver pinmux
  defconfig: tegra: add some useful options

 arch/arm/boards/Makefile                     |   1 +
 arch/arm/boards/nvidia-beaver/Makefile       |   4 +
 arch/arm/boards/nvidia-beaver/entry.c        |  38 ++
 arch/arm/boards/toradex-colibri-t20/Makefile |   4 +-
 arch/arm/boards/toshiba-ac100/Makefile       |   4 +-
 arch/arm/configs/tegra_v7_defconfig          |   9 +
 arch/arm/dts/Makefile                        |   4 +-
 arch/arm/dts/tegra30-beaver.dts              | 917 +++++++++++++++++++++++++++
 arch/arm/dts/tegra30.dtsi                    | 892 ++++++++++++++++++++++++++
 arch/arm/mach-tegra/Kconfig                  |   8 +
 arch/arm/mach-tegra/Makefile                 |  12 +-
 arch/arm/mach-tegra/include/mach/lowlevel.h  |  34 +
 arch/arm/mach-tegra/tegra20.c                |  27 +-
 arch/arm/mach-tegra/tegra_avp_init.c         |   4 +-
 arch/arm/mach-tegra/tegra_maincomplex_init.c |   6 +-
 drivers/clk/tegra/Makefile                   |   3 +-
 drivers/clk/tegra/clk-periph.c               |  20 +-
 drivers/clk/tegra/clk-tegra30.c              | 365 +++++++++++
 drivers/gpio/gpio-tegra.c                    |  20 +-
 drivers/mci/tegra-sdmmc.c                    |   4 +-
 drivers/pinctrl/Kconfig                      |   6 +
 drivers/pinctrl/Makefile                     |   1 +
 drivers/pinctrl/pinctrl-tegra30.c            | 503 +++++++++++++++
 images/Makefile.tegra                        |   5 +
 include/dt-bindings/clock/tegra30-car.h      | 265 ++++++++
 include/dt-bindings/pinctrl/pinctrl-tegra.h  |  45 ++
 26 files changed, 3168 insertions(+), 33 deletions(-)
 create mode 100644 arch/arm/boards/nvidia-beaver/Makefile
 create mode 100644 arch/arm/boards/nvidia-beaver/entry.c
 create mode 100644 arch/arm/dts/tegra30-beaver.dts
 create mode 100644 arch/arm/dts/tegra30.dtsi
 create mode 100644 drivers/clk/tegra/clk-tegra30.c
 create mode 100644 drivers/pinctrl/pinctrl-tegra30.c
 create mode 100644 include/dt-bindings/clock/tegra30-car.h
 create mode 100644 include/dt-bindings/pinctrl/pinctrl-tegra.h

-- 
1.9.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 20+ messages in thread

end of thread, other threads:[~2014-04-23  9:41 UTC | newest]

Thread overview: 20+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-04-13 13:27 [PATCH 00/18] Tegra 3 support Lucas Stach
2014-04-13 13:27 ` [PATCH 01/18] gpio: tegra: remove dead code Lucas Stach
2014-04-13 13:27 ` [PATCH 02/18] mmc: tegra: fix typo Lucas Stach
2014-04-13 13:27 ` [PATCH 03/18] tegra: disable more lowlevel unsafe switch optimizations Lucas Stach
2014-04-13 13:27 ` [PATCH 04/18] tegra: source MSELECT clock from CLK_M Lucas Stach
2014-04-13 13:27 ` [PATCH 05/18] tegra: add Tegra3 kconfig symbol Lucas Stach
2014-04-13 13:27 ` [PATCH 06/18] tegra: add Tegra3 ramsize detection Lucas Stach
2014-04-13 13:27 ` [PATCH 07/18] tegra: add Tegra3 mem initcall Lucas Stach
2014-04-13 13:27 ` [PATCH 08/18] tegra: recognize T30 in debug UART code Lucas Stach
2014-04-13 13:27 ` [PATCH 09/18] dt-bindings: add pinctrl-tegra.h Lucas Stach
2014-04-13 13:27 ` [PATCH 10/18] pinctrl: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 11/18] dt-bindings: add tegra30-car.h Lucas Stach
2014-04-13 13:27 ` [PATCH 12/18] clk: tegra: consider new T30 clock registers Lucas Stach
2014-04-13 13:27 ` [PATCH 13/18] clk: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 14/18] gpio: tegra: add Tegra3 setup Lucas Stach
2014-04-13 13:27 ` [PATCH 15/18] ARM: tegra: add basic Tegra3 DT Lucas Stach
2014-04-13 13:27 ` [PATCH 16/18] ARM: tegra: add NVidia Beaver board support Lucas Stach
2014-04-13 13:27 ` [PATCH 17/18] ARM: dts: tegra: add full Beaver pinmux Lucas Stach
2014-04-13 13:27 ` [PATCH 18/18] defconfig: tegra: add some useful options Lucas Stach
2014-04-23  9:41 ` [PATCH 00/18] Tegra 3 support Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox