mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH 08/18] tegra: recognize T30 in debug UART code
Date: Sun, 13 Apr 2014 15:27:38 +0200	[thread overview]
Message-ID: <1397395668-9325-9-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1397395668-9325-1-git-send-email-dev@lynxeye.de>

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/mach-tegra/include/mach/lowlevel.h | 13 +++++++++++++
 arch/arm/mach-tegra/tegra20.c               | 11 ++++++++---
 2 files changed, 21 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-tegra/include/mach/lowlevel.h b/arch/arm/mach-tegra/include/mach/lowlevel.h
index d7b6f1e994fc..52b405d5f859 100644
--- a/arch/arm/mach-tegra/include/mach/lowlevel.h
+++ b/arch/arm/mach-tegra/include/mach/lowlevel.h
@@ -200,6 +200,19 @@ int tegra_get_osc_clock(void)
 	}
 }
 
+static __always_inline
+int tegra_get_pllp_rate(void)
+{
+	switch (tegra_get_chiptype()) {
+	case TEGRA20:
+		return 216000000;
+	case TEGRA30:
+		return 408000000;
+	default:
+		return 0;
+	}
+}
+
 #define TIMER_CNTR_1US	0x00
 #define TIMER_USEC_CFG	0x04
 
diff --git a/arch/arm/mach-tegra/tegra20.c b/arch/arm/mach-tegra/tegra20.c
index 0d76df9844dd..3ae77a120fe7 100644
--- a/arch/arm/mach-tegra/tegra20.c
+++ b/arch/arm/mach-tegra/tegra20.c
@@ -22,14 +22,17 @@
 #include <mach/lowlevel.h>
 
 static struct NS16550_plat debug_uart = {
-	.clock = 216000000, /* pll_p rate */
 	.shift = 2,
 };
 
-static int tegra20_add_debug_console(void)
+static int tegra_add_debug_console(void)
 {
 	unsigned long base = 0;
 
+	if (!of_machine_is_compatible("nvidia,tegra20") &&
+	    !of_machine_is_compatible("nvidia,tegra30"))
+		return 0;
+
 	/* figure out which UART to use */
 	if (IS_ENABLED(CONFIG_TEGRA_UART_NONE))
 		return 0;
@@ -49,12 +52,14 @@ static int tegra20_add_debug_console(void)
 	if (!base)
 		return -ENODEV;
 
+	debug_uart.clock = tegra_get_pllp_rate();
+
 	add_ns16550_device(DEVICE_ID_DYNAMIC, base, 8 << debug_uart.shift,
 			   IORESOURCE_MEM_8BIT, &debug_uart);
 
 	return 0;
 }
-console_initcall(tegra20_add_debug_console);
+console_initcall(tegra_add_debug_console);
 
 static int tegra20_mem_init(void)
 {
-- 
1.9.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-04-13 13:29 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-13 13:27 [PATCH 00/18] Tegra 3 support Lucas Stach
2014-04-13 13:27 ` [PATCH 01/18] gpio: tegra: remove dead code Lucas Stach
2014-04-13 13:27 ` [PATCH 02/18] mmc: tegra: fix typo Lucas Stach
2014-04-13 13:27 ` [PATCH 03/18] tegra: disable more lowlevel unsafe switch optimizations Lucas Stach
2014-04-13 13:27 ` [PATCH 04/18] tegra: source MSELECT clock from CLK_M Lucas Stach
2014-04-13 13:27 ` [PATCH 05/18] tegra: add Tegra3 kconfig symbol Lucas Stach
2014-04-13 13:27 ` [PATCH 06/18] tegra: add Tegra3 ramsize detection Lucas Stach
2014-04-13 13:27 ` [PATCH 07/18] tegra: add Tegra3 mem initcall Lucas Stach
2014-04-13 13:27 ` Lucas Stach [this message]
2014-04-13 13:27 ` [PATCH 09/18] dt-bindings: add pinctrl-tegra.h Lucas Stach
2014-04-13 13:27 ` [PATCH 10/18] pinctrl: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 11/18] dt-bindings: add tegra30-car.h Lucas Stach
2014-04-13 13:27 ` [PATCH 12/18] clk: tegra: consider new T30 clock registers Lucas Stach
2014-04-13 13:27 ` [PATCH 13/18] clk: tegra: add Tegra3 driver Lucas Stach
2014-04-13 13:27 ` [PATCH 14/18] gpio: tegra: add Tegra3 setup Lucas Stach
2014-04-13 13:27 ` [PATCH 15/18] ARM: tegra: add basic Tegra3 DT Lucas Stach
2014-04-13 13:27 ` [PATCH 16/18] ARM: tegra: add NVidia Beaver board support Lucas Stach
2014-04-13 13:27 ` [PATCH 17/18] ARM: dts: tegra: add full Beaver pinmux Lucas Stach
2014-04-13 13:27 ` [PATCH 18/18] defconfig: tegra: add some useful options Lucas Stach
2014-04-23  9:41 ` [PATCH 00/18] Tegra 3 support Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1397395668-9325-9-git-send-email-dev@lynxeye.de \
    --to=dev@lynxeye.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox