mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 12/12] ARM: dove: Use upstream dtsi file
Date: Mon, 28 Apr 2014 09:46:01 +0200	[thread overview]
Message-ID: <1398671161-29045-12-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1398671161-29045-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/dts/dove.dtsi | 627 +------------------------------------------------
 1 file changed, 1 insertion(+), 626 deletions(-)

diff --git a/arch/arm/dts/dove.dtsi b/arch/arm/dts/dove.dtsi
index 2b76524..2074fc5 100644
--- a/arch/arm/dts/dove.dtsi
+++ b/arch/arm/dts/dove.dtsi
@@ -1,626 +1 @@
-/include/ "skeleton.dtsi"
-
-#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
-
-/ {
-	compatible = "marvell,dove";
-	model = "Marvell Armada 88AP510 SoC";
-	interrupt-parent = <&intc>;
-
-	aliases {
-		gpio0 = &gpio0;
-		gpio1 = &gpio1;
-		gpio2 = &gpio2;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "marvell,pj4a", "marvell,sheeva-v7";
-			device_type = "cpu";
-			next-level-cache = <&l2>;
-			reg = <0>;
-		};
-	};
-
-	l2: l2-cache {
-		compatible = "marvell,tauros2-cache";
-		marvell,tauros2-cache-features = <0>;
-	};
-
-	mbus {
-		compatible = "marvell,dove-mbus", "marvell,mbus", "simple-bus";
-		#address-cells = <2>;
-		#size-cells = <1>;
-		controller = <&mbusc>;
-		pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256M MEM space */
-		pcie-io-aperture  = <0xf2000000 0x00200000>; /*   2M I/O space */
-
-		ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x0100000   /* MBUS regs  1M */
-			  MBUS_ID(0xf0, 0x02) 0 0xf1800000 0x1000000   /* AXI  regs 16M */
-			  MBUS_ID(0x01, 0xfd) 0 0xf8000000 0x8000000   /* BootROM  128M */
-			  MBUS_ID(0x03, 0x01) 0 0xc8000000 0x0100000   /* CESA SRAM  1M */
-			  MBUS_ID(0x0d, 0x00) 0 0xf0000000 0x0100000>; /* PMU  SRAM  1M */
-
-		pcie: pcie-controller {
-			compatible = "marvell,dove-pcie";
-			status = "disabled";
-			device_type = "pci";
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			msi-parent = <&intc>;
-			bus-range = <0x00 0xff>;
-
-			ranges = <0x82000000 0x0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x2000
-			          0x82000000 0x0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x2000
-				  0x82000000 0x1 0x0 MBUS_ID(0x04, 0xe8) 0 1 0   /* Port 0.0 Mem */
-				  0x81000000 0x1 0x0 MBUS_ID(0x04, 0xe0) 0 1 0   /* Port 0.0 I/O */
-				  0x82000000 0x2 0x0 MBUS_ID(0x08, 0xe8) 0 1 0   /* Port 1.0 Mem */
-				  0x81000000 0x2 0x0 MBUS_ID(0x08, 0xe0) 0 1 0>; /* Port 1.0 I/O */
-
-			pcie-port@0 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-				reg = <0x0800 0 0 0 0>;
-				clocks = <&gate_clk 4>;
-				marvell,pcie-port = <0>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-				          0x81000000 0 0 0x81000000 0x1 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 16>;
-			};
-
-			pcie-port@1 {
-				device_type = "pci";
-				status = "disabled";
-				assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-				reg = <0x1000 0 0 0 0>;
-				clocks = <&gate_clk 5>;
-				marvell,pcie-port = <1>;
-
-				#address-cells = <3>;
-				#size-cells = <2>;
-				ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-				          0x81000000 0 0 0x81000000 0x2 0 1 0>;
-
-				#interrupt-cells = <1>;
-				interrupt-map-mask = <0 0 0 0>;
-				interrupt-map = <0 0 0 0 &intc 18>;
-			};
-		};
-
-		internal-regs {
-			compatible = "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges = <0x00000000 MBUS_ID(0xf0, 0x01) 0 0x0100000   /* MBUS regs  1M */
-				  0x00800000 MBUS_ID(0xf0, 0x02) 0 0x1000000   /* AXI  regs 16M */
-				  0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800   /* CESA SRAM  2k */
-				  0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU  SRAM  2k */
-
-			spi0: spi-ctrl@10600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <6>;
-				reg = <0x10600 0x28>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_spi0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			i2c0: i2c-ctrl@11000 {
-				compatible = "marvell,mv64xxx-i2c";
-				reg = <0x11000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <11>;
-				clock-frequency = <400000>;
-				timeout-ms = <1000>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart0: serial@12000 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <7>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart1: serial@12100 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <8>;
-				clocks = <&core_clk 0>;
-				pinctrl-0 = <&pmx_uart1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			uart2: serial@12200 {
-				compatible = "ns16550a";
-				reg = <0x12000 0x100>;
-				reg-shift = <2>;
-				interrupts = <9>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			uart3: serial@12300 {
-				compatible = "ns16550a";
-				reg = <0x12100 0x100>;
-				reg-shift = <2>;
-				interrupts = <10>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			spi1: spi-ctrl@14600 {
-				compatible = "marvell,orion-spi";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <1>;
-				interrupts = <5>;
-				reg = <0x14600 0x28>;
-				clocks = <&core_clk 0>;
-				status = "disabled";
-			};
-
-			mbusc: mbus-ctrl@20000 {
-				compatible = "marvell,mbus-controller";
-				reg = <0x20000 0x80>, <0x800100 0x8>;
-			};
-
-			bridge_intc: bridge-interrupt-ctrl@20110 {
-				compatible = "marvell,orion-bridge-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20110 0x8>;
-				interrupts = <0>;
-				marvell,#interrupts = <5>;
-			};
-
-			intc: main-interrupt-ctrl@20200 {
-				compatible = "marvell,orion-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0x20200 0x10>, <0x20210 0x10>;
-			};
-
-			timer: timer@20300 {
-				compatible = "marvell,orion-timer";
-				reg = <0x20300 0x20>;
-				interrupt-parent = <&bridge_intc>;
-				interrupts = <1>, <2>;
-				clocks = <&core_clk 0>;
-			};
-
-			crypto: crypto-engine@30000 {
-				compatible = "marvell,orion-crypto";
-				reg = <0x30000 0x10000>,
-				      <0xffffe000 0x800>;
-				reg-names = "regs", "sram";
-				interrupts = <31>;
-				clocks = <&gate_clk 15>;
-				status = "okay";
-			};
-
-			ehci0: usb-host@50000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x50000 0x1000>;
-				interrupts = <24>;
-				clocks = <&gate_clk 0>;
-				status = "okay";
-			};
-
-			ehci1: usb-host@51000 {
-				compatible = "marvell,orion-ehci";
-				reg = <0x51000 0x1000>;
-				interrupts = <25>;
-				clocks = <&gate_clk 1>;
-				status = "okay";
-			};
-
-			xor0: dma-engine@60800 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60800 0x100
-				       0x60a00 0x100>;
-				clocks = <&gate_clk 23>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <39>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <40>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			xor1: dma-engine@60900 {
-				compatible = "marvell,orion-xor";
-				reg = <0x60900 0x100
-				       0x60b00 0x100>;
-				clocks = <&gate_clk 24>;
-				status = "okay";
-
-				channel0 {
-					interrupts = <42>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-
-				channel1 {
-					interrupts = <43>;
-					dmacap,memcpy;
-					dmacap,xor;
-				};
-			};
-
-			sdio1: sdio-host@90000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x90000 0x100>;
-				interrupts = <36>, <38>;
-				clocks = <&gate_clk 9>;
-				pinctrl-0 = <&pmx_sdio1>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			eth: ethernet-ctrl@72000 {
-				compatible = "marvell,orion-eth";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72000 0x4000>;
-				clocks = <&gate_clk 2>;
-				marvell,tx-checksum-limit = <1600>;
-				status = "disabled";
-
-				ethernet-port@0 {
-					compatible = "marvell,orion-eth-port";
-					reg = <0>;
-					interrupts = <29>;
-					/* overwrite MAC address in bootloader */
-					local-mac-address = [00 00 00 00 00 00];
-					phy-handle = <&ethphy>;
-				};
-			};
-
-			mdio: mdio-bus@72004 {
-				compatible = "marvell,orion-mdio";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72004 0x84>;
-				interrupts = <30>;
-				clocks = <&gate_clk 2>;
-				status = "disabled";
-
-				ethphy: ethernet-phy {
-					/* set phy address in board file */
-				};
-			};
-
-			sdio0: sdio-host@92000 {
-				compatible = "marvell,dove-sdhci";
-				reg = <0x92000 0x100>;
-				interrupts = <35>, <37>;
-				clocks = <&gate_clk 8>;
-				pinctrl-0 = <&pmx_sdio0>;
-				pinctrl-names = "default";
-				status = "disabled";
-			};
-
-			sata0: sata-host@a0000 {
-				compatible = "marvell,orion-sata";
-				reg = <0xa0000 0x2400>;
-				interrupts = <62>;
-				clocks = <&gate_clk 3>;
-				phys = <&sata_phy0>;
-				phy-names = "port0";
-				nr-ports = <1>;
-				status = "disabled";
-			};
-
-			sata_phy0: sata-phy@a2000 {
-				compatible = "marvell,mvebu-sata-phy";
-				reg = <0xa2000 0x0334>;
-				clocks = <&gate_clk 3>;
-				clock-names = "sata";
-				#phy-cells = <0>;
-				status = "ok";
-			};
-
-			audio0: audio-controller@b0000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb0000 0x2210>;
-				interrupts = <19>, <20>;
-				clocks = <&gate_clk 12>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			audio1: audio-controller@b4000 {
-				compatible = "marvell,dove-audio";
-				reg = <0xb4000 0x2210>;
-				interrupts = <21>, <22>;
-				clocks = <&gate_clk 13>;
-				clock-names = "internal";
-				status = "disabled";
-			};
-
-			thermal: thermal-diode@d001c {
-				compatible = "marvell,dove-thermal";
-				reg = <0xd001c 0x0c>, <0xd005c 0x08>;
-			};
-
-			gate_clk: clock-gating-ctrl@d0038 {
-				compatible = "marvell,dove-gating-clock";
-				reg = <0xd0038 0x4>;
-				clocks = <&core_clk 0>;
-				#clock-cells = <1>;
-			};
-
-			pmu_intc: pmu-interrupt-ctrl@d0050 {
-				compatible = "marvell,dove-pmu-intc";
-				interrupt-controller;
-				#interrupt-cells = <1>;
-				reg = <0xd0050 0x8>;
-				interrupts = <33>;
-				marvell,#interrupts = <7>;
-			};
-
-			pinctrl: pin-ctrl@d0200 {
-				compatible = "marvell,dove-pinctrl";
-				reg = <0xd0200 0x10>;
-				clocks = <&gate_clk 22>;
-
-				pmx_gpio_0: pmx-gpio-0 {
-					marvell,pins = "mpp0";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_1: pmx-gpio-1 {
-					marvell,pins = "mpp1";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_2: pmx-gpio-2 {
-					marvell,pins = "mpp2";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_3: pmx-gpio-3 {
-					marvell,pins = "mpp3";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_4: pmx-gpio-4 {
-					marvell,pins = "mpp4";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_5: pmx-gpio-5 {
-					marvell,pins = "mpp5";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_6: pmx-gpio-6 {
-					marvell,pins = "mpp6";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_7: pmx-gpio-7 {
-					marvell,pins = "mpp7";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_8: pmx-gpio-8 {
-					marvell,pins = "mpp8";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_9: pmx-gpio-9 {
-					marvell,pins = "mpp9";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_10: pmx-gpio-10 {
-					marvell,pins = "mpp10";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_11: pmx-gpio-11 {
-					marvell,pins = "mpp11";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_12: pmx-gpio-12 {
-					marvell,pins = "mpp12";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_13: pmx-gpio-13 {
-					marvell,pins = "mpp13";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_extclk: pmx-audio1-extclk {
-					marvell,pins = "mpp13";
-					marvell,function = "audio1";
-				};
-
-				pmx_gpio_14: pmx-gpio-14 {
-					marvell,pins = "mpp14";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_15: pmx-gpio-15 {
-					marvell,pins = "mpp15";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_16: pmx-gpio-16 {
-					marvell,pins = "mpp16";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_17: pmx-gpio-17 {
-					marvell,pins = "mpp17";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_18: pmx-gpio-18 {
-					marvell,pins = "mpp18";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_19: pmx-gpio-19 {
-					marvell,pins = "mpp19";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_20: pmx-gpio-20 {
-					marvell,pins = "mpp20";
-					marvell,function = "gpio";
-				};
-
-				pmx_gpio_21: pmx-gpio-21 {
-					marvell,pins = "mpp21";
-					marvell,function = "gpio";
-				};
-
-				pmx_camera: pmx-camera {
-					marvell,pins = "mpp_camera";
-					marvell,function = "camera";
-				};
-
-				pmx_camera_gpio: pmx-camera-gpio {
-					marvell,pins = "mpp_camera";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio0: pmx-sdio0 {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "sdio0";
-				};
-
-				pmx_sdio0_gpio: pmx-sdio0-gpio {
-					marvell,pins = "mpp_sdio0";
-					marvell,function = "gpio";
-				};
-
-				pmx_sdio1: pmx-sdio1 {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "sdio1";
-				};
-
-				pmx_sdio1_gpio: pmx-sdio1-gpio {
-					marvell,pins = "mpp_sdio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_gpio: pmx-audio1-gpio {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "gpio";
-				};
-
-				pmx_audio1_i2s1_spdifo: pmx-audio1-i2s1-spdifo {
-					marvell,pins = "mpp_audio1";
-					marvell,function = "i2s1/spdifo";
-				};
-
-				pmx_spi0: pmx-spi0 {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "spi0";
-				};
-
-				pmx_spi0_gpio: pmx-spi0-gpio {
-					marvell,pins = "mpp_spi0";
-					marvell,function = "gpio";
-				};
-
-				pmx_uart1: pmx-uart1 {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "uart1";
-				};
-
-				pmx_uart1_gpio: pmx-uart1-gpio {
-					marvell,pins = "mpp_uart1";
-					marvell,function = "gpio";
-				};
-
-				pmx_nand: pmx-nand {
-					marvell,pins = "mpp_nand";
-					marvell,function = "nand";
-				};
-
-				pmx_nand_gpo: pmx-nand-gpo {
-					marvell,pins = "mpp_nand";
-					marvell,function = "gpo";
-				};
-			};
-
-			core_clk: core-clocks@d0214 {
-				compatible = "marvell,dove-core-clock";
-				reg = <0xd0214 0x4>;
-				#clock-cells = <1>;
-			};
-
-			gpio0: gpio-ctrl@d0400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0400 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <12>, <13>, <14>, <60>;
-			};
-
-			gpio1: gpio-ctrl@d0420 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xd0420 0x20>;
-				ngpios = <32>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				interrupts = <61>;
-			};
-
-			rtc: real-time-clock@d8500 {
-				compatible = "marvell,orion-rtc";
-				reg = <0xd8500 0x20>;
-				interrupt-parent = <&pmu_intc>;
-				interrupts = <5>;
-			};
-
-			gpio2: gpio-ctrl@e8400 {
-				compatible = "marvell,orion-gpio";
-				#gpio-cells = <2>;
-				gpio-controller;
-				reg = <0xe8400 0x0c>;
-				ngpios = <8>;
-			};
-		};
-	};
-};
+#include <arm/dove.dtsi>
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-04-28  7:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-28  7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
2014-04-28  7:45 ` [PATCH 02/12] serial: ns16550: omap: set register shift from code Sascha Hauer
2014-04-28  7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
2014-04-28 14:22   ` Antony Pavlov
2014-04-28 18:33     ` Sascha Hauer
2014-04-30  5:49   ` [PATCH] make: dts: fix out-of-tree build Silvio Fricke
2014-05-05  7:38     ` Sascha Hauer
2014-04-28  7:45 ` [PATCH 04/12] dts: i.MX51 efika sb: Roll back pingroup changes Sascha Hauer
2014-04-28  7:45 ` [PATCH 05/12] ARM: dts: i.MX51: Use upstream dts files Sascha Hauer
2014-04-28  7:45 ` [PATCH 06/12] ARM: i.MX6: Use upstream dtsi files Sascha Hauer
2014-04-28  7:45 ` [PATCH 07/12] ARM: i.MX53: " Sascha Hauer
2014-04-28  7:45 ` [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file Sascha Hauer
2014-04-28  7:45 ` [PATCH 09/12] ARM: i.MX27: " Sascha Hauer
2014-04-28  7:45 ` [PATCH 10/12] ARM: AM33xx: " Sascha Hauer
2014-04-28  7:46 ` [PATCH 11/12] ARM: Tegra20: Use upstream dtsi files Sascha Hauer
2014-04-28  7:46 ` Sascha Hauer [this message]
2014-04-28 17:36   ` [PATCH] fixup! ARM: dove: Use upstream dtsi file Sebastian Hesselbarth
2014-04-28 18:40     ` Sascha Hauer
2014-05-05  8:20 ` [PATCH] Add Linux dts files and use them Sascha Hauer
2014-05-05 15:57   ` Alexander Shiyan
2014-05-05 17:48     ` Sascha Hauer
2014-05-05 18:01       ` Alexander Shiyan
2014-05-08  7:39         ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398671161-29045-12-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox