mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 09/12] ARM: i.MX27: Use upstream dtsi file
Date: Mon, 28 Apr 2014 09:45:58 +0200	[thread overview]
Message-ID: <1398671161-29045-9-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1398671161-29045-1-git-send-email-s.hauer@pengutronix.de>

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/dts/imx27.dtsi | 553 +-----------------------------------------------
 1 file changed, 1 insertion(+), 552 deletions(-)

diff --git a/arch/arm/dts/imx27.dtsi b/arch/arm/dts/imx27.dtsi
index 83a8247..49a0ddf 100644
--- a/arch/arm/dts/imx27.dtsi
+++ b/arch/arm/dts/imx27.dtsi
@@ -8,555 +8,4 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-
-#include "skeleton.dtsi"
-#include "imx27-pinfunc.h"
-#include <dt-bindings/interrupt-controller/irq.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	aliases {
-		ethernet0 = &fec;
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		gpio4 = &gpio5;
-		gpio5 = &gpio6;
-		i2c0 = &i2c1;
-		i2c1 = &i2c2;
-		serial0 = &uart1;
-		serial1 = &uart2;
-		serial2 = &uart3;
-		serial3 = &uart4;
-		serial4 = &uart5;
-		serial5 = &uart6;
-		spi0 = &cspi1;
-		spi1 = &cspi2;
-		spi2 = &cspi3;
-	};
-
-	aitc: aitc-interrupt-controller@e0000000 {
-		compatible = "fsl,imx27-aitc", "fsl,avic";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x10040000 0x1000>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		osc26m {
-			compatible = "fsl,imx-osc26m", "fixed-clock";
-			clock-frequency = <26000000>;
-		};
-	};
-
-	cpus {
-		#size-cells = <0>;
-		#address-cells = <1>;
-
-		cpu: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,arm926ej-s";
-			operating-points = <
-				/* kHz uV */
-				266000 1300000
-				399000 1450000
-			>;
-			clock-latency = <62500>;
-			clocks = <&clks 18>;
-			voltage-tolerance = <5>;
-		};
-	};
-
-	usbphy {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usbphy0: usbphy@0 {
-			compatible = "usb-nop-xceiv";
-			reg = <0>;
-			clocks = <&clks 75>;
-			clock-names = "main_clk";
-		};
-
-		usbphy2: usbphy@2 {
-			compatible = "usb-nop-xceiv";
-			reg = <2>;
-			clocks = <&clks 75>;
-			clock-names = "main_clk";
-		};
-	};
-
-	soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "simple-bus";
-		interrupt-parent = <&aitc>;
-		ranges;
-
-		aipi@10000000 { /* AIPI1 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10000000 0x20000>;
-			ranges;
-
-			dma: dma@10001000 {
-				compatible = "fsl,imx27-dma";
-				reg = <0x10001000 0x1000>;
-				interrupts = <32>;
-				clocks = <&clks 50>, <&clks 70>;
-				clock-names = "ipg", "ahb";
-				#dma-cells = <1>;
-				#dma-channels = <16>;
-			};
-
-			wdog: wdog@10002000 {
-				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
-				reg = <0x10002000 0x1000>;
-				interrupts = <27>;
-				clocks = <&clks 74>;
-			};
-
-			gpt1: timer@10003000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10003000 0x1000>;
-				interrupts = <26>;
-				clocks = <&clks 46>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt2: timer@10004000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10004000 0x1000>;
-				interrupts = <25>;
-				clocks = <&clks 45>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt3: timer@10005000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10005000 0x1000>;
-				interrupts = <24>;
-				clocks = <&clks 44>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			pwm: pwm@10006000 {
-				#pwm-cells = <2>;
-				compatible = "fsl,imx27-pwm";
-				reg = <0x10006000 0x1000>;
-				interrupts = <23>;
-				clocks = <&clks 34>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			kpp: kpp@10008000 {
-				compatible = "fsl,imx27-kpp", "fsl,imx21-kpp";
-				reg = <0x10008000 0x1000>;
-				interrupts = <21>;
-				clocks = <&clks 37>;
-				status = "disabled";
-			};
-
-			owire: owire@10009000 {
-				compatible = "fsl,imx27-owire", "fsl,imx21-owire";
-				reg = <0x10009000 0x1000>;
-				clocks = <&clks 35>;
-				status = "disabled";
-			};
-
-			uart1: serial@1000a000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000a000 0x1000>;
-				interrupts = <20>;
-				clocks = <&clks 81>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart2: serial@1000b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000b000 0x1000>;
-				interrupts = <19>;
-				clocks = <&clks 80>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart3: serial@1000c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000c000 0x1000>;
-				interrupts = <18>;
-				clocks = <&clks 79>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart4: serial@1000d000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1000d000 0x1000>;
-				interrupts = <17>;
-				clocks = <&clks 78>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi1: cspi@1000e000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000e000 0x1000>;
-				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 60>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			cspi2: cspi@1000f000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x1000f000 0x1000>;
-				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 60>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			ssi1: ssi@10010000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10010000 0x1000>;
-				interrupts = <14>;
-				clocks = <&clks 26>;
-				dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			ssi2: ssi@10011000 {
-				#sound-dai-cells = <0>;
-				compatible = "fsl,imx27-ssi", "fsl,imx21-ssi";
-				reg = <0x10011000 0x1000>;
-				interrupts = <13>;
-				clocks = <&clks 25>;
-				dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>;
-				dma-names = "rx0", "tx0", "rx1", "tx1";
-				fsl,fifo-depth = <8>;
-				status = "disabled";
-			};
-
-			i2c1: i2c@10012000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x10012000 0x1000>;
-				interrupts = <12>;
-				clocks = <&clks 40>;
-				status = "disabled";
-			};
-
-			sdhci1: sdhci@10013000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10013000 0x1000>;
-				interrupts = <11>;
-				clocks = <&clks 30>, <&clks 60>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 7>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			sdhci2: sdhci@10014000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x10014000 0x1000>;
-				interrupts = <10>;
-				clocks = <&clks 29>, <&clks 60>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 6>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			iomuxc: iomuxc@10015000 {
-				compatible = "fsl,imx27-iomuxc";
-				reg = <0x10015000 0x600>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				gpio1: gpio@10015000 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015000 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio2: gpio@10015100 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015100 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio3: gpio@10015200 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015200 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio4: gpio@10015300 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015300 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio5: gpio@10015400 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015400 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-
-				gpio6: gpio@10015500 {
-					compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
-					reg = <0x10015500 0x100>;
-					interrupts = <8>;
-					gpio-controller;
-					#gpio-cells = <2>;
-					interrupt-controller;
-					#interrupt-cells = <2>;
-				};
-			};
-
-			audmux: audmux@10016000 {
-				compatible = "fsl,imx27-audmux", "fsl,imx21-audmux";
-				reg = <0x10016000 0x1000>;
-				clocks = <&clks 0>;
-				clock-names = "audmux";
-				status = "disabled";
-			};
-
-			cspi3: cspi@10017000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-cspi";
-				reg = <0x10017000 0x1000>;
-				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 60>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			gpt4: timer@10019000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x10019000 0x1000>;
-				interrupts = <4>;
-				clocks = <&clks 43>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			gpt5: timer@1001a000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001a000 0x1000>;
-				interrupts = <3>;
-				clocks = <&clks 42>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-
-			uart5: serial@1001b000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001b000 0x1000>;
-				interrupts = <49>;
-				clocks = <&clks 77>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			uart6: serial@1001c000 {
-				compatible = "fsl,imx27-uart", "fsl,imx21-uart";
-				reg = <0x1001c000 0x1000>;
-				interrupts = <48>;
-				clocks = <&clks 78>, <&clks 61>;
-				clock-names = "ipg", "per";
-				status = "disabled";
-			};
-
-			i2c2: i2c@1001d000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
-				reg = <0x1001d000 0x1000>;
-				interrupts = <1>;
-				clocks = <&clks 39>;
-				status = "disabled";
-			};
-
-			sdhci3: sdhci@1001e000 {
-				compatible = "fsl,imx27-mmc", "fsl,imx21-mmc";
-				reg = <0x1001e000 0x1000>;
-				interrupts = <9>;
-				clocks = <&clks 28>, <&clks 60>;
-				clock-names = "ipg", "per";
-				dmas = <&dma 36>;
-				dma-names = "rx-tx";
-				status = "disabled";
-			};
-
-			gpt6: timer@1001f000 {
-				compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
-				reg = <0x1001f000 0x1000>;
-				interrupts = <2>;
-				clocks = <&clks 41>, <&clks 61>;
-				clock-names = "ipg", "per";
-			};
-		};
-
-		aipi@10020000 { /* AIPI2 */
-			compatible = "fsl,aipi-bus", "simple-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x10020000 0x20000>;
-			ranges;
-
-			fb: fb@10021000 {
-				compatible = "fsl,imx27-fb", "fsl,imx21-fb";
-				interrupts = <61>;
-				reg = <0x10021000 0x1000>;
-				clocks = <&clks 36>, <&clks 65>, <&clks 59>;
-				clock-names = "ipg", "ahb", "per";
-				status = "disabled";
-			};
-
-			coda: coda@10023000 {
-				compatible = "fsl,imx27-vpu";
-				reg = <0x10023000 0x0200>;
-				interrupts = <53>;
-				clocks = <&clks 57>, <&clks 66>;
-				clock-names = "per", "ahb";
-				iram = <&iram>;
-			};
-
-			usbotg: usb@10024000 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024000 0x200>;
-				interrupts = <56>;
-				clocks = <&clks 15>;
-				fsl,usbmisc = <&usbmisc 0>;
-				fsl,usbphy = <&usbphy0>;
-				status = "disabled";
-			};
-
-			usbh1: usb@10024200 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024200 0x200>;
-				interrupts = <54>;
-				clocks = <&clks 15>;
-				fsl,usbmisc = <&usbmisc 1>;
-				status = "disabled";
-			};
-
-			usbh2: usb@10024400 {
-				compatible = "fsl,imx27-usb";
-				reg = <0x10024400 0x200>;
-				interrupts = <55>;
-				clocks = <&clks 15>;
-				fsl,usbmisc = <&usbmisc 2>;
-				fsl,usbphy = <&usbphy2>;
-				status = "disabled";
-			};
-
-			usbmisc: usbmisc@10024600 {
-				#index-cells = <1>;
-				compatible = "fsl,imx27-usbmisc";
-				reg = <0x10024600 0x200>;
-				clocks = <&clks 62>;
-			};
-
-			sahara2: sahara@10025000 {
-				compatible = "fsl,imx27-sahara";
-				reg = <0x10025000 0x1000>;
-				interrupts = <59>;
-				clocks = <&clks 32>, <&clks 64>;
-				clock-names = "ipg", "ahb";
-			};
-
-			clks: ccm@10027000{
-				compatible = "fsl,imx27-ccm";
-				reg = <0x10027000 0x1000>;
-				#clock-cells = <1>;
-			};
-
-			iim: iim@10028000 {
-				compatible = "fsl,imx27-iim";
-				reg = <0x10028000 0x1000>;
-				interrupts = <62>;
-				clocks = <&clks 38>;
-			};
-
-			fec: ethernet@1002b000 {
-				compatible = "fsl,imx27-fec";
-				reg = <0x1002b000 0x4000>;
-				interrupts = <50>;
-				clocks = <&clks 48>, <&clks 67>;
-				clock-names = "ipg", "ahb";
-				status = "disabled";
-			};
-		};
-
-		nfc: nand@d8000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-nand";
-			reg = <0xd8000000 0x1000>;
-			interrupts = <29>;
-			clocks = <&clks 54>;
-			status = "disabled";
-		};
-
-		weim: weim@d8002000 {
-			#address-cells = <2>;
-			#size-cells = <1>;
-			compatible = "fsl,imx27-weim";
-			reg = <0xd8002000 0x1000>;
-			clocks = <&clks 0>;
-			ranges = <
-				0 0 0xc0000000 0x08000000
-				1 0 0xc8000000 0x08000000
-				2 0 0xd0000000 0x02000000
-				3 0 0xd2000000 0x02000000
-				4 0 0xd4000000 0x02000000
-				5 0 0xd6000000 0x02000000
-			>;
-			status = "disabled";
-		};
-
-		iram: iram@ffff4c00 {
-			compatible = "mmio-sram";
-			reg = <0xffff4c00 0xb400>;
-		};
-	};
-};
+#include <arm/imx27.dtsi>
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-04-28  7:46 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-28  7:45 [PATCH] Add Linux dts files and use them Sascha Hauer
2014-04-28  7:45 ` [PATCH 02/12] serial: ns16550: omap: set register shift from code Sascha Hauer
2014-04-28  7:45 ` [PATCH 03/12] dts: Use dt-bindings from kernel Sascha Hauer
2014-04-28 14:22   ` Antony Pavlov
2014-04-28 18:33     ` Sascha Hauer
2014-04-30  5:49   ` [PATCH] make: dts: fix out-of-tree build Silvio Fricke
2014-05-05  7:38     ` Sascha Hauer
2014-04-28  7:45 ` [PATCH 04/12] dts: i.MX51 efika sb: Roll back pingroup changes Sascha Hauer
2014-04-28  7:45 ` [PATCH 05/12] ARM: dts: i.MX51: Use upstream dts files Sascha Hauer
2014-04-28  7:45 ` [PATCH 06/12] ARM: i.MX6: Use upstream dtsi files Sascha Hauer
2014-04-28  7:45 ` [PATCH 07/12] ARM: i.MX53: " Sascha Hauer
2014-04-28  7:45 ` [PATCH 08/12] ARM: i.MX25: Use upstream dtsi file Sascha Hauer
2014-04-28  7:45 ` Sascha Hauer [this message]
2014-04-28  7:45 ` [PATCH 10/12] ARM: AM33xx: " Sascha Hauer
2014-04-28  7:46 ` [PATCH 11/12] ARM: Tegra20: Use upstream dtsi files Sascha Hauer
2014-04-28  7:46 ` [PATCH 12/12] ARM: dove: Use upstream dtsi file Sascha Hauer
2014-04-28 17:36   ` [PATCH] fixup! " Sebastian Hesselbarth
2014-04-28 18:40     ` Sascha Hauer
2014-05-05  8:20 ` [PATCH] Add Linux dts files and use them Sascha Hauer
2014-05-05 15:57   ` Alexander Shiyan
2014-05-05 17:48     ` Sascha Hauer
2014-05-05 18:01       ` Alexander Shiyan
2014-05-08  7:39         ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1398671161-29045-9-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox