[PATCH] fixup! ARM: dove: Use upstream dtsi file

[Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>]

Sascha,

thanks _a lot_ for doing this. It saves me from importing the same
for the other SoCs. Anyway, I'd even go further and fixup the Dove
patch with this one here.

Feel free to squash this into

09015ae52c18 ("ARM: dove: Use upstream dtsi file")

and add my

Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>

---
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org
---
 arch/arm/dts/dove-cubox-bb.dts |   2 +-
 arch/arm/dts/dove-cubox.dts    | 136 -----------------------------------------
 arch/arm/dts/dove.dtsi         |   1 -
 3 files changed, 1 insertion(+), 138 deletions(-)
 delete mode 100644 arch/arm/dts/dove-cubox.dts
 delete mode 100644 arch/arm/dts/dove.dtsi

diff --git a/arch/arm/dts/dove-cubox-bb.dts b/arch/arm/dts/dove-cubox-bb.dts
index 3d1e5b4fa622..f7ad55c4e794 100644
--- a/arch/arm/dts/dove-cubox-bb.dts
+++ b/arch/arm/dts/dove-cubox-bb.dts
@@ -3,7 +3,7 @@
  *   Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
  */
 
-#include "dove-cubox.dts"
+#include "arm/dove-cubox.dts"
 
 / {
 	chosen {
diff --git a/arch/arm/dts/dove-cubox.dts b/arch/arm/dts/dove-cubox.dts
deleted file mode 100644
index 7a70f4ca502a..000000000000
--- a/arch/arm/dts/dove-cubox.dts
+++ /dev/null
@@ -1,136 +0,0 @@
-/dts-v1/;
-
-#include "dove.dtsi"
-
-/ {
-	model = "SolidRun CuBox";
-	compatible = "solidrun,cubox", "marvell,dove";
-
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x40000000>;
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-0 = <&pmx_gpio_18>;
-		pinctrl-names = "default";
-
-		power {
-			label = "Power";
-			gpios = <&gpio0 18 1>;
-			default-state = "keep";
-		};
-	};
-
-	regulators {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		usb_power: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "USB Power";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			enable-active-high;
-			regulator-always-on;
-			regulator-boot-on;
-			gpio = <&gpio0 1 0>;
-			pinctrl-0 = <&pmx_gpio_1>;
-			pinctrl-names = "default";
-		};
-	};
-
-	clocks {
-		/* 25MHz reference crystal */
-		ref25: oscillator {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-	};
-
-	ir_recv: ir-receiver {
-		compatible = "gpio-ir-receiver";
-		gpios = <&gpio0 19 1>;
-		pinctrl-0 = <&pmx_gpio_19>;
-		pinctrl-names = "default";
-	};
-};
-
-&uart0 { status = "okay"; };
-&sata0 { status = "okay"; };
-&mdio { status = "okay"; };
-&eth { status = "okay"; };
-
-&ethphy {
-	compatible = "marvell,88e1310";
-	reg = <1>;
-};
-
-&i2c0 {
-	status = "okay";
-	clock-frequency = <100000>;
-
-	si5351: clock-generator {
-		compatible = "silabs,si5351a-msop";
-		reg = <0x60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		#clock-cells = <1>;
-
-		/* connect xtal input to 25MHz reference */
-		clocks = <&ref25>;
-
-		/* connect xtal input as source of pll0 and pll1 */
-		silabs,pll-source = <0 0>, <1 0>;
-
-		clkout0 {
-			reg = <0>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <0>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-
-		clkout2 {
-			reg = <2>;
-			silabs,drive-strength = <8>;
-			silabs,multisynth-source = <1>;
-			silabs,clock-source = <0>;
-			silabs,pll-master;
-		};
-	};
-};
-
-&sdio0 {
-	status = "okay";
-	/* sdio0 card detect is connected to wrong pin on CuBox */
-	cd-gpios = <&gpio0 12 1>;
-	pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>;
-};
-
-&spi0 {
-	status = "okay";
-
-	/* spi0.0: 4M Flash Winbond W25Q32BV */
-	spi-flash@0 {
-		compatible = "st,w25q32";
-		spi-max-frequency = <20000000>;
-		reg = <0>;
-	};
-};
-
-&audio1 {
-	status = "okay";
-	clocks = <&gate_clk 13>, <&si5351 2>;
-	clock-names = "internal", "extclk";
-	pinctrl-0 = <&pmx_audio1_i2s1_spdifo &pmx_audio1_extclk>;
-	pinctrl-names = "default";
-};
diff --git a/arch/arm/dts/dove.dtsi b/arch/arm/dts/dove.dtsi
deleted file mode 100644
index 2074fc56a3fe..000000000000
--- a/arch/arm/dts/dove.dtsi
+++ /dev/null
@@ -1 +0,0 @@
-#include <arm/dove.dtsi>
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox