mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 00/25] Tegra-next
@ 2014-05-12  7:07 Lucas Stach
  2014-05-12  7:07 ` [PATCH 01/25] reset: add reset controller framework Lucas Stach
                   ` (24 more replies)
  0 siblings, 25 replies; 28+ messages in thread
From: Lucas Stach @ 2014-05-12  7:07 UTC (permalink / raw)
  To: barebox

Ok, here we go: this is a truckload of fixes and new
features for the Tegra arch. One big patch series this time
as it took me some time to validate everything.

Patches 1-6 introduce a proper reset controller and remove
the old hacks used to reset the devices. This is needed for
the follow on patches as the Tegra i2c driver needs closer
control over device reset.

Patches 7-10 add the Tegra i2c driver and the necessary clocks.

Patch 11 uses the new i2c support to active the SDMMC1 voltage
rail on Beaver.

Patches 12-15 are fixes to the Tegra MCI and pinctrl to make
SD cards work on Tegra 3, not only eMMC as before.

Patches 17-25 import the Tegra cbootimage tool, add
infrastructure to build persistable images and convert
existing boards over to use it.

All in all this now allows to build flashable images. I
verified that things are working by loading an image from
SD card on Beaver and writing it to the boot partition on eMMC.

After reset of the board I'm now greeted by barebox instead
of U-Boot. :)

Lucas Stach (25):
  reset: add reset controller framework
  tegra: lowlevel: add function to fetch chipid
  reset: add tegra reset controller
  clk: tegra: reset UARTS from clock controller
  mci: tegra: add reset control
  clk: tegra: remove device reset hack
  clk: tegra: allow to register clocks with 16 bit divider
  clk: tegra30: register i2c clocks
  clk: tegra20: register i2c clocks
  i2c: add Tegra driver
  ARM: tegra: beaver: activate sdmmc1 voltage rail
  ARM: tegra: beaver: adjust pinmux to make sdmmc1 work
  mci: tegra: apply pad autocalibration on T30
  mci: tegra: don't set 8bit mode unconditionally
  pinctrl: tegra30: parse drive groups
  scripts: tegra: import cbootimage
  tegra: cbootimage: remove noisy output
  Makefile.lib: add rule to built Tegra BCTs
  images: add Tegra20 image build rules
  images: add Tegra30 image build rules
  ARM: boards: colibri t20: import BCT cfgs
  images: tegra: build all Toradex Colibri images
  ARM: boards: beaver: import BCT cfg
  images: tegra: build NVidia Beaver image
  images: tegra: rename ac100 image

 .gitignore                                         |    1 +
 arch/arm/Kconfig                                   |    1 +
 arch/arm/boards/nvidia-beaver/Makefile             |    3 +
 .../boards/nvidia-beaver/beaver-2gb-emmc.bct.cfg   |  819 +++++++++++++++
 arch/arm/boards/nvidia-beaver/board.c              |   38 +
 arch/arm/boards/toradex-colibri-t20/Makefile       |    4 +
 .../colibri-t20_256_hsmmc.bct.cfg                  |  451 ++++++++
 .../colibri-t20_256_v11_nand.bct.cfg               |  459 ++++++++
 .../colibri-t20_256_v12_nand.bct.cfg               |  459 ++++++++
 .../colibri-t20_512_hsmmc.bct.cfg                  |  451 ++++++++
 .../colibri-t20_512_v11_nand.bct.cfg               |  459 ++++++++
 .../colibri-t20_512_v12_nand.bct.cfg               |  459 ++++++++
 arch/arm/boards/toradex-colibri-t20/entry.c        |   42 +-
 arch/arm/dts/tegra30-beaver.dts                    |   10 +
 arch/arm/mach-tegra/include/mach/lowlevel.h        |    6 +
 arch/arm/mach-tegra/include/mach/tegra30-car.h     |    2 +
 drivers/Kconfig                                    |    1 +
 drivers/Makefile                                   |    1 +
 drivers/clk/tegra/clk-periph.c                     |   46 +-
 drivers/clk/tegra/clk-tegra20.c                    |   16 +
 drivers/clk/tegra/clk-tegra30.c                    |   19 +
 drivers/clk/tegra/clk.c                            |  145 ++-
 drivers/clk/tegra/clk.h                            |   18 +
 drivers/i2c/busses/Kconfig                         |    4 +
 drivers/i2c/busses/Makefile                        |    1 +
 drivers/i2c/busses/i2c-tegra.c                     |  708 +++++++++++++
 drivers/mci/tegra-sdmmc.c                          |   37 +-
 drivers/pinctrl/pinctrl-tegra30.c                  |  159 ++-
 drivers/reset/Kconfig                              |   13 +
 drivers/reset/Makefile                             |    1 +
 drivers/reset/core.c                               |  236 +++++
 images/.gitignore                                  |    4 +
 images/Makefile                                    |    3 +-
 images/Makefile.tegra                              |   70 +-
 include/linux/reset-controller.h                   |   50 +
 include/linux/reset.h                              |   67 ++
 scripts/Makefile                                   |    1 +
 scripts/Makefile.lib                               |    6 +
 scripts/tegra/Makefile                             |   22 +
 scripts/tegra/aes_ref.c                            |  326 ++++++
 scripts/tegra/bct_dump.c                           |  296 ++++++
 scripts/tegra/cbootimage.c                         |  242 +++++
 scripts/tegra/cbootimage.h                         |  108 ++
 scripts/tegra/context.c                            |   42 +
 scripts/tegra/context.h                            |   28 +
 scripts/tegra/crypto.c                             |  299 ++++++
 scripts/tegra/crypto.h                             |   47 +
 scripts/tegra/data_layout.c                        |  898 ++++++++++++++++
 scripts/tegra/data_layout.h                        |   55 +
 scripts/tegra/nvaes_ref.h                          |   35 +
 scripts/tegra/parse.c                              |  803 ++++++++++++++
 scripts/tegra/parse.h                              |  923 ++++++++++++++++
 scripts/tegra/set.c                                |  206 ++++
 scripts/tegra/set.h                                |   49 +
 scripts/tegra/t114/nvbctlib_t114.c                 | 1103 +++++++++++++++++++
 scripts/tegra/t114/nvboot_bct_t114.h               |  363 +++++++
 scripts/tegra/t114/nvboot_sdram_param_t114.h       |  806 ++++++++++++++
 scripts/tegra/t114/parse_t114.c                    |  430 ++++++++
 scripts/tegra/t124/nvbctlib_t124.c                 | 1104 ++++++++++++++++++++
 scripts/tegra/t124/nvboot_bct_t124.h               |  359 +++++++
 scripts/tegra/t124/nvboot_sdram_param_t124.h       |  803 ++++++++++++++
 scripts/tegra/t124/parse_t124.c                    |  429 ++++++++
 scripts/tegra/t20/nvbctlib_t20.c                   |  684 ++++++++++++
 scripts/tegra/t20/nvboot_bct_t20.h                 |  316 ++++++
 scripts/tegra/t20/nvboot_sdram_param_t20.h         |  363 +++++++
 scripts/tegra/t20/parse_t20.c                      |  251 +++++
 scripts/tegra/t30/nvbctlib_t30.c                   |  891 ++++++++++++++++
 scripts/tegra/t30/nvboot_bct_t30.h                 |  379 +++++++
 scripts/tegra/t30/nvboot_sdram_param_t30.h         |  568 ++++++++++
 scripts/tegra/t30/parse_t30.c                      |  360 +++++++
 70 files changed, 18820 insertions(+), 38 deletions(-)
 create mode 100644 arch/arm/boards/nvidia-beaver/beaver-2gb-emmc.bct.cfg
 create mode 100644 arch/arm/boards/nvidia-beaver/board.c
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_hsmmc.bct.cfg
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_v11_nand.bct.cfg
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_256_v12_nand.bct.cfg
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_hsmmc.bct.cfg
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_v11_nand.bct.cfg
 create mode 100644 arch/arm/boards/toradex-colibri-t20/colibri-t20_512_v12_nand.bct.cfg
 create mode 100644 drivers/i2c/busses/i2c-tegra.c
 create mode 100644 drivers/reset/Kconfig
 create mode 100644 drivers/reset/Makefile
 create mode 100644 drivers/reset/core.c
 create mode 100644 include/linux/reset-controller.h
 create mode 100644 include/linux/reset.h
 create mode 100644 scripts/tegra/Makefile
 create mode 100644 scripts/tegra/aes_ref.c
 create mode 100644 scripts/tegra/bct_dump.c
 create mode 100644 scripts/tegra/cbootimage.c
 create mode 100644 scripts/tegra/cbootimage.h
 create mode 100644 scripts/tegra/context.c
 create mode 100644 scripts/tegra/context.h
 create mode 100644 scripts/tegra/crypto.c
 create mode 100644 scripts/tegra/crypto.h
 create mode 100644 scripts/tegra/data_layout.c
 create mode 100644 scripts/tegra/data_layout.h
 create mode 100644 scripts/tegra/nvaes_ref.h
 create mode 100644 scripts/tegra/parse.c
 create mode 100644 scripts/tegra/parse.h
 create mode 100644 scripts/tegra/set.c
 create mode 100644 scripts/tegra/set.h
 create mode 100644 scripts/tegra/t114/nvbctlib_t114.c
 create mode 100644 scripts/tegra/t114/nvboot_bct_t114.h
 create mode 100644 scripts/tegra/t114/nvboot_sdram_param_t114.h
 create mode 100644 scripts/tegra/t114/parse_t114.c
 create mode 100644 scripts/tegra/t124/nvbctlib_t124.c
 create mode 100644 scripts/tegra/t124/nvboot_bct_t124.h
 create mode 100644 scripts/tegra/t124/nvboot_sdram_param_t124.h
 create mode 100644 scripts/tegra/t124/parse_t124.c
 create mode 100644 scripts/tegra/t20/nvbctlib_t20.c
 create mode 100644 scripts/tegra/t20/nvboot_bct_t20.h
 create mode 100644 scripts/tegra/t20/nvboot_sdram_param_t20.h
 create mode 100644 scripts/tegra/t20/parse_t20.c
 create mode 100644 scripts/tegra/t30/nvbctlib_t30.c
 create mode 100644 scripts/tegra/t30/nvboot_bct_t30.h
 create mode 100644 scripts/tegra/t30/nvboot_sdram_param_t30.h
 create mode 100644 scripts/tegra/t30/parse_t30.c

-- 
1.9.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 28+ messages in thread

end of thread, other threads:[~2014-05-12 18:52 UTC | newest]

Thread overview: 28+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-05-12  7:07 [PATCH 00/25] Tegra-next Lucas Stach
2014-05-12  7:07 ` [PATCH 01/25] reset: add reset controller framework Lucas Stach
2014-05-12  7:07 ` [PATCH 02/25] tegra: lowlevel: add function to fetch chipid Lucas Stach
2014-05-12  7:07 ` [PATCH 03/25] reset: add tegra reset controller Lucas Stach
2014-05-12  7:07 ` [PATCH 04/25] clk: tegra: reset UARTS from clock controller Lucas Stach
2014-05-12  7:07 ` [PATCH 05/25] mci: tegra: add reset control Lucas Stach
2014-05-12  7:07 ` [PATCH 06/25] clk: tegra: remove device reset hack Lucas Stach
2014-05-12  7:07 ` [PATCH 07/25] clk: tegra: allow to register clocks with 16 bit divider Lucas Stach
2014-05-12  7:07 ` [PATCH 08/25] clk: tegra30: register i2c clocks Lucas Stach
2014-05-12  7:07 ` [PATCH 09/25] clk: tegra20: " Lucas Stach
2014-05-12  7:07 ` [PATCH 10/25] i2c: add Tegra driver Lucas Stach
2014-05-12 11:49   ` Sascha Hauer
2014-05-12 18:55     ` Lucas Stach
2014-05-12  7:07 ` [PATCH 11/25] ARM: tegra: beaver: activate sdmmc1 voltage rail Lucas Stach
2014-05-12  7:07 ` [PATCH 12/25] ARM: tegra: beaver: adjust pinmux to make sdmmc1 work Lucas Stach
2014-05-12  7:07 ` [PATCH 13/25] mci: tegra: apply pad autocalibration on T30 Lucas Stach
2014-05-12  7:07 ` [PATCH 14/25] mci: tegra: don't set 8bit mode unconditionally Lucas Stach
2014-05-12  7:07 ` [PATCH 15/25] pinctrl: tegra30: parse drive groups Lucas Stach
2014-05-12  7:07 ` [PATCH 16/25] scripts: tegra: import cbootimage Lucas Stach
2014-05-12  7:07 ` [PATCH 17/25] tegra: cbootimage: remove noisy output Lucas Stach
2014-05-12  7:07 ` [PATCH 18/25] Makefile.lib: add rule to built Tegra BCTs Lucas Stach
2014-05-12  7:08 ` [PATCH 19/25] images: add Tegra20 image build rules Lucas Stach
2014-05-12  7:08 ` [PATCH 20/25] images: add Tegra30 " Lucas Stach
2014-05-12  7:08 ` [PATCH 21/25] ARM: boards: colibri t20: import BCT cfgs Lucas Stach
2014-05-12  7:08 ` [PATCH 22/25] images: tegra: build all Toradex Colibri images Lucas Stach
2014-05-12  7:08 ` [PATCH 23/25] ARM: boards: beaver: import BCT cfg Lucas Stach
2014-05-12  7:08 ` [PATCH 24/25] images: tegra: build NVidia Beaver image Lucas Stach
2014-05-12  7:08 ` [PATCH 25/25] images: tegra: rename ac100 image Lucas Stach

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox