From: Wadim Egorov <w.egorov@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH 1/4] PCM051: Update RAM timings
Date: Mon, 12 May 2014 14:24:19 +0200 [thread overview]
Message-ID: <1399897462-21433-1-git-send-email-w.egorov@phytec.de> (raw)
From: Teresa Gámez <t.gamez@phytec.de>
Updated timings for new MT41J256M16HA15EIT RAM.
Timings are backward compatible to the MT41J256M8HX15E RAMs
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
---
arch/arm/boards/phytec-phycore-am335x/lowlevel.c | 28 ++++++++++-----------
1 files changed, 13 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
index f04961d..2badcc1 100644
--- a/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
+++ b/arch/arm/boards/phytec-phycore-am335x/lowlevel.c
@@ -15,7 +15,7 @@
#include <mach/wdt.h>
#include <debug_ll.h>
-static const struct am33xx_cmd_control MT41J256M8HX15E_2x256M8_cmd = {
+static const struct am33xx_cmd_control MT41J256M16HA15EIT_1x512MB_cmd = {
.slave_ratio0 = 0x40,
.dll_lock_diff0 = 0x0,
.invert_clkout0 = 0x1,
@@ -27,23 +27,21 @@ static const struct am33xx_cmd_control MT41J256M8HX15E_2x256M8_cmd = {
.invert_clkout2 = 0x1,
};
-static const struct am33xx_emif_regs MT41J256M8HX15E_2x256M8_regs = {
+static const struct am33xx_emif_regs MT41J256M16HA15EIT_1x512MB_regs = {
.emif_read_latency = 0x6,
- .emif_tim1 = 0x0668A39B,
- .emif_tim2 = 0x26337FDA,
- .emif_tim3 = 0x501F830F,
- .sdram_config = 0x61C04832,
+ .emif_tim1 = 0x0888A39B,
+ .emif_tim2 = 0x26517FDA,
+ .emif_tim3 = 0x501F84EF,
+ .sdram_config = 0x61C04B32,
.zq_config = 0x50074BE4,
.sdram_ref_ctrl = 0x0000093B,
};
-static const struct am33xx_ddr_data MT41J256M8HX15E_2x256M8_data = {
+static const struct am33xx_ddr_data MT41J256M16HA15EIT_1x512MB_data = {
.rd_slave_ratio0 = 0x3B,
- .wr_dqs_slave_ratio0 = 0x85,
- .fifo_we_slave_ratio0 = 0x100,
- .wr_slave_ratio0 = 0xC1,
- .use_rank0_delay = 0x01,
- .dll_lock_diff0 = 0x0,
+ .wr_dqs_slave_ratio0 = 0x3B,
+ .fifo_we_slave_ratio0 = 0x96,
+ .wr_slave_ratio0 = 0x76,
};
extern char __dtb_am335x_phytec_phycore_start[];
@@ -72,9 +70,9 @@ static noinline void pcm051_board_init(void)
am33xx_pll_init(MPUPLL_M_600, 25, DDRPLL_M_303);
- am335x_sdram_init(0x18B, &MT41J256M8HX15E_2x256M8_cmd,
- &MT41J256M8HX15E_2x256M8_regs,
- &MT41J256M8HX15E_2x256M8_data);
+ am335x_sdram_init(0x18B, &MT41J256M16HA15EIT_1x512MB_cmd,
+ &MT41J256M16HA15EIT_1x512MB_regs,
+ &MT41J256M16HA15EIT_1x512MB_data);
am33xx_uart0_soft_reset();
am33xx_enable_uart0_pin_mux();
--
1.7.0.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-05-12 12:24 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-12 12:24 Wadim Egorov [this message]
2014-05-12 12:24 ` [PATCH 2/4] barebox: common: added new filetypes Wadim Egorov
2014-05-12 12:24 ` [PATCH 3/4] ARM: omap: barebox update nand xloadslots handler Wadim Egorov
2014-05-13 8:38 ` Sascha Hauer
2014-05-13 9:46 ` Alexander Aring
2014-05-12 12:24 ` [PATCH 4/4] phycore-am335x: Added bbu " Wadim Egorov
2014-05-12 14:13 ` Holger Schurig
2014-05-14 7:21 ` [PATCH 1/4] PCM051: Update RAM timings Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399897462-21433-1-git-send-email-w.egorov@phytec.de \
--to=w.egorov@phytec.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox