From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wi0-x234.google.com ([2a00:1450:400c:c05::234]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1X0Tnd-0004U2-Ma for barebox@lists.infradead.org; Fri, 27 Jun 2014 10:54:34 +0000 Received: by mail-wi0-f180.google.com with SMTP id hi2so2581888wib.1 for ; Fri, 27 Jun 2014 03:54:11 -0700 (PDT) From: Holger Schurig Date: Fri, 27 Jun 2014 13:00:18 +0200 Message-Id: <1403866821-4029-10-git-send-email-holgerschurig@gmail.com> In-Reply-To: <1403866821-4029-1-git-send-email-holgerschurig@gmail.com> References: <1403866821-4029-1-git-send-email-holgerschurig@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 09/12] doc: remove board type from barebox prompt examples To: barebox@lists.infradead.org I kept however the one example that directly demos the bootup on an Efika board. --- Documentation/user/driver-model.rst | 10 +++++----- Documentation/user/networking.rst | 2 +- Documentation/user/updating.rst | 2 +- Documentation/user/variables.rst | 2 +- 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/Documentation/user/driver-model.rst b/Documentation/user/driver-model.rst index fae275e..ab7d292 100644 --- a/Documentation/user/driver-model.rst +++ b/Documentation/user/driver-model.rst @@ -34,7 +34,7 @@ handled with device detection. The user visible interface to device detection is the :ref:`command_detect` command. ``detect -l`` shows a list of detectable devices:: - barebox@Genesi Efika MX Smartbook:/ detect -l + barebox:/ detect -l 70004000.esdhc 70008000.esdhc 73f80000.usb @@ -48,7 +48,7 @@ devices:: A particular device can be detected with ``detect ``:: - barebox@Genesi Efika MX Smartbook:/ detect 73f80200.usb + barebox:/ detect 73f80200.usb Found SMSC USB331x ULPI transceiver (0x0424:0x0006). Bus 002 Device 004: ID 13d3:3273 802.11 n WLAN mdio_bus: miibus0: probed @@ -67,7 +67,7 @@ additional information for a device. The parameters can be listed with the :ref:`command_devinfo` command. A ``devinfo `` will print the parameters of a device:: - barebox@Genesi Efika MX Smartbook:/ devinfo eth0 + barebox:/ devinfo eth0 Parameters: ipaddr: 192.168.23.197 serverip: 192.168.23.1 @@ -82,9 +82,9 @@ The parameters can be used as shell variables:: device variables may have a type, so assigning wrong values may fail:: - barebox@Genesi Efika MX Smartbook:/ eth0.ipaddr="This is not an IP" + barebox:/ eth0.ipaddr="This is not an IP" set parameter: Invalid argument - barebox@Genesi Efika MX Smartbook:/ echo $? + barebox:/ echo $? 1 **HINT:** barebox has tab completion for variables. Typing ``eth0.`` diff --git a/Documentation/user/networking.rst b/Documentation/user/networking.rst index c22685f..9c6eeb6 100644 --- a/Documentation/user/networking.rst +++ b/Documentation/user/networking.rst @@ -14,7 +14,7 @@ device is usually ``eth0``. The current configuration can be viewed with the .. code-block:: sh - barebox@Genesi Efika MX Smartbook:/ devinfo eth0 + barebox:/ devinfo eth0 Parameters: ipaddr: 192.168.23.197 serverip: 192.168.23.1 diff --git a/Documentation/user/updating.rst b/Documentation/user/updating.rst index 0503e7d..2a963b6 100644 --- a/Documentation/user/updating.rst +++ b/Documentation/user/updating.rst @@ -18,7 +18,7 @@ Updating barebox can be as easy as:: Multiple handlers can be registered to the update mechanism. Usually the device barebox has been started from is registered as default (marked with a ``*``):: - barebox@Genesi Efika MX Smartbook:/ barebox_update -l + barebox:/ barebox_update -l registered update handlers: * mmc -> /dev/mmc1 spinor -> /dev/m25p0 diff --git a/Documentation/user/variables.rst b/Documentation/user/variables.rst index e349874..13477a0 100644 --- a/Documentation/user/variables.rst +++ b/Documentation/user/variables.rst @@ -33,7 +33,7 @@ Since it's hard to remember which variables these are and if the current barebox has support for them the :ref:`command_magicvar` command can print a list of all variables with special meaning along with a short description:: - barebox@Genesi Efika MX Smartbook:/ magicvar + barebox:/ magicvar OPTARG optarg for hush builtin getopt PATH colon separated list of pathes to search for executables PS1 hush prompt -- 1.7.10.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox