From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v5 0/7] barebox PCI support
Date: Fri, 4 Jul 2014 01:26:59 +0400 [thread overview]
Message-ID: <1404422826-6589-1-git-send-email-antonynpavlov@gmail.com> (raw)
This patchseries introduce simple PCI bus support for barebox.
This patchseries can be found on github:
https://github.com/frantony/barebox/tree/pci.20140704
Changes since RFC v4:
* introduce pci_iomap();
* rtl8139: use dev_err instead of printk;
* rtl8139: clean '#if 0';
* struct pci_bus: drop unused fields.
Changes since RFC v3:
* rebase over latest 'next';
* use list for pci_root_buses;
* move common PCI Kconfig stuff from arch/mips to drivers/pci;
* make pci_*_write_config_* PCIe-friendly (use 'int' type for
config register address);
* drop some unused stuff;
* change lspci "no pci" error message to "No PCI bus detected";
* rtl8139: use dma_alloc_coherent();
* rtl8139: use pci_set_master() & pci_clear_master().
Antony Pavlov (7):
linux/ioport.h: include missed <linux/list.h>
MIPS: add dma_alloc_coherent()
PCI: initial commit
commands: add 'lspci' command
net: add RealTek RTL-8139 PCI Ethernet driver
MIPS: add PCI support for GT64120-based Malta board
MIPS: qemu-malta_defconfig: enable PCI & network stuff
arch/mips/Kconfig | 1 +
arch/mips/configs/qemu-malta_defconfig | 4 +
arch/mips/include/asm/dma-mapping.h | 25 +
arch/mips/include/asm/gt64120.h | 53 ++
arch/mips/mach-malta/Makefile | 1 +
arch/mips/mach-malta/include/mach/mach-gt64120.h | 2 +
arch/mips/mach-malta/pci.c | 236 +++++++++
commands/Kconfig | 8 +
commands/Makefile | 1 +
commands/lspci.c | 52 ++
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/net/Kconfig | 8 +
drivers/net/Makefile | 1 +
drivers/net/rtl8139.c | 605 +++++++++++++++++++++++
drivers/pci/Kconfig | 29 ++
drivers/pci/Makefile | 8 +
drivers/pci/bus.c | 110 +++++
drivers/pci/pci.c | 292 +++++++++++
drivers/pci/pci_iomap.c | 29 ++
include/linux/ioport.h | 1 +
include/linux/mod_devicetable.h | 20 +
include/linux/pci.h | 297 +++++++++++
include/linux/pci_ids.h | 141 ++++++
include/linux/pci_regs.h | 110 +++++
25 files changed, 2036 insertions(+)
create mode 100644 arch/mips/include/asm/dma-mapping.h
create mode 100644 arch/mips/mach-malta/pci.c
create mode 100644 commands/lspci.c
create mode 100644 drivers/net/rtl8139.c
create mode 100644 drivers/pci/Kconfig
create mode 100644 drivers/pci/Makefile
create mode 100644 drivers/pci/bus.c
create mode 100644 drivers/pci/pci.c
create mode 100644 drivers/pci/pci_iomap.c
create mode 100644 include/linux/mod_devicetable.h
create mode 100644 include/linux/pci.h
create mode 100644 include/linux/pci_ids.h
create mode 100644 include/linux/pci_regs.h
--
2.0.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2014-07-03 21:27 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-07-03 21:26 Antony Pavlov [this message]
2014-07-03 21:27 ` [PATCH v5 1/7] linux/ioport.h: include missed <linux/list.h> Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 2/7] MIPS: add dma_alloc_coherent() Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 3/7] PCI: initial commit Antony Pavlov
2014-07-07 18:22 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-07 21:23 ` Antony Pavlov
2014-07-08 6:29 ` Sascha Hauer
2014-07-08 9:48 ` Antony Pavlov
2014-07-08 9:51 ` Sascha Hauer
2014-07-08 9:50 ` Antony Pavlov
2014-07-08 9:53 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-03 21:27 ` [PATCH v5 4/7] commands: add 'lspci' command Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 5/7] net: add RealTek RTL-8139 PCI Ethernet driver Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 6/7] MIPS: add PCI support for GT64120-based Malta board Antony Pavlov
2014-07-03 21:27 ` [PATCH v5 7/7] MIPS: qemu-malta_defconfig: enable PCI & network stuff Antony Pavlov
2014-07-04 5:38 ` [PATCH v5 0/7] barebox PCI support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1404422826-6589-1-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox