mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 19/21] serial: Add EFI stdio driver
Date: Tue,  8 Jul 2014 10:50:15 +0200	[thread overview]
Message-ID: <1404809417-21477-20-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1404809417-21477-1-git-send-email-s.hauer@pengutronix.de>

This adds a driver which uses the EFI stdin/stdout interfaces to
implement a barebox console. Keyboard input should be fairly complete,
but not all vt100 needed by barebox work properly. The clear-to-eol
escape is missing causing garbled output in the editor.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 commands/edit.c            |  11 +-
 drivers/serial/Kconfig     |   4 +
 drivers/serial/Makefile    |   1 +
 drivers/serial/efi-stdio.c | 367 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 382 insertions(+), 1 deletion(-)
 create mode 100644 drivers/serial/efi-stdio.c

diff --git a/commands/edit.c b/commands/edit.c
index 5a2da7d..98af583 100644
--- a/commands/edit.c
+++ b/commands/edit.c
@@ -379,7 +379,16 @@ static int do_edit(int argc, char *argv[])
 		return COMMAND_ERROR_USAGE;
 
 	screenwidth = 80;
-	screenheight = 25;
+
+	/*
+	 * The EFI simple text output protocol wraps to the next line and scrolls
+	 * down when we write to the right bottom screen position. Reduce the number
+	 * of rows by one to work around this.
+	 */
+	if (IS_ENABLED(CONFIG_ARCH_EFI))
+		screenheight = 24;
+	else
+		screenheight = 25;
 
 	/* check if we are called as "sedit" instead of "edit" */
 	if (*argv[0] == 's') {
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index f51c6e6..5698c2f 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -45,6 +45,10 @@ config DRIVER_SERIAL_LINUX_CONSOLE
 	default y
 	bool "linux console driver"
 
+config DRIVER_SERIAL_EFI_STDIO
+	depends on ARCH_EFI
+	bool "EFI stdio driver"
+
 config DRIVER_SERIAL_MPC5XXX
 	depends on MPC5200
 	default y
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index e1865f7..2c0176d 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_DRIVER_SERIAL_PXA)			+= serial_pxa.o
 obj-$(CONFIG_DRIVER_SERIAL_OMAP4_USBBOOT)	+= serial_omap4_usbboot.o
 obj-$(CONFIG_DRIVER_SERIAL_AUART)		+= serial_auart.o
 obj-$(CONFIG_DRIVER_SERIAL_CADENCE)		+= serial_cadence.o
+obj-$(CONFIG_DRIVER_SERIAL_EFI_STDIO)		+= efi-stdio.o
diff --git a/drivers/serial/efi-stdio.c b/drivers/serial/efi-stdio.c
new file mode 100644
index 0000000..bf14c5e
--- /dev/null
+++ b/drivers/serial/efi-stdio.c
@@ -0,0 +1,367 @@
+/*
+ * efi_console.c - EFI console support
+ *
+ * Copyright (c) 2014 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <malloc.h>
+#include <console.h>
+#include <xfuncs.h>
+#include <efi.h>
+#include <readkey.h>
+#include <linux/ctype.h>
+#include <mach/efi.h>
+
+#define EFI_SHIFT_STATE_VALID           0x80000000
+#define EFI_RIGHT_CONTROL_PRESSED       0x00000004
+#define EFI_LEFT_CONTROL_PRESSED        0x00000008
+#define EFI_RIGHT_ALT_PRESSED           0x00000010
+#define EFI_LEFT_ALT_PRESSED            0x00000020
+
+#define EFI_CONTROL_PRESSED             (EFI_RIGHT_CONTROL_PRESSED | EFI_LEFT_CONTROL_PRESSED)
+#define EFI_ALT_PRESSED                 (EFI_RIGHT_ALT_PRESSED | EFI_LEFT_ALT_PRESSED)
+#define KEYPRESS(keys, scan, uni) ((((uint64_t)keys) << 32) | ((scan) << 16) | (uni))
+#define KEYCHAR(k) ((k) & 0xffff)
+#define CHAR_CTRL(c) ((c) - 'a' + 1)
+
+#define EFI_BLACK   0x00
+#define EFI_BLUE    0x01
+#define EFI_GREEN   0x02
+#define EFI_CYAN            (EFI_BLUE | EFI_GREEN)
+#define EFI_RED     0x04
+#define EFI_MAGENTA         (EFI_BLUE | EFI_RED)
+#define EFI_BROWN           (EFI_GREEN | EFI_RED)
+#define EFI_LIGHTGRAY       (EFI_BLUE | EFI_GREEN | EFI_RED)
+#define EFI_BRIGHT  0x08
+#define EFI_DARKGRAY        (EFI_BRIGHT)
+#define EFI_LIGHTBLUE       (EFI_BLUE | EFI_BRIGHT)
+#define EFI_LIGHTGREEN      (EFI_GREEN | EFI_BRIGHT)
+#define EFI_LIGHTCYAN       (EFI_CYAN | EFI_BRIGHT)
+#define EFI_LIGHTRED        (EFI_RED | EFI_BRIGHT)
+#define EFI_LIGHTMAGENTA    (EFI_MAGENTA | EFI_BRIGHT)
+#define EFI_YELLOW          (EFI_BROWN | EFI_BRIGHT)
+#define EFI_WHITE           (EFI_BLUE | EFI_GREEN | EFI_RED | EFI_BRIGHT)
+
+#define EFI_TEXT_ATTR(f,b)  ((f) | ((b) << 4))
+
+#define EFI_BACKGROUND_BLACK        0x00
+#define EFI_BACKGROUND_BLUE         0x10
+#define EFI_BACKGROUND_GREEN        0x20
+#define EFI_BACKGROUND_CYAN         (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN)
+#define EFI_BACKGROUND_RED          0x40
+#define EFI_BACKGROUND_MAGENTA      (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_RED)
+#define EFI_BACKGROUND_BROWN        (EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
+#define EFI_BACKGROUND_LIGHTGRAY    (EFI_BACKGROUND_BLUE | EFI_BACKGROUND_GREEN | EFI_BACKGROUND_RED)
+
+struct efi_console_priv {
+	struct efi_simple_text_output_protocol *out;
+	struct efi_simple_input_interface *in;
+	struct console_device cdev;
+	int lastkey;
+	u16 efi_console_buffer[CONFIG_CBSIZE];
+
+	unsigned long columns, rows;
+
+	int current_color;
+	s16 *blank_line;
+};
+
+static inline struct efi_console_priv *to_efi(struct console_device *cdev)
+{
+	return container_of(cdev, struct efi_console_priv, cdev);
+}
+
+struct efi_ctrlkey {
+	u8 scan_code;
+	u8 bb_key;
+};
+
+static struct efi_ctrlkey ctrlkeys[] = {
+	{ 0x01, BB_KEY_UP },
+	{ 0x02, BB_KEY_DOWN },
+	{ 0x03, BB_KEY_RIGHT },
+	{ 0x04, BB_KEY_LEFT },
+	{ 0x05, BB_KEY_HOME },
+	{ 0x06, BB_KEY_END },
+	{ 0x07, BB_KEY_INSERT },
+	{ 0x08, BB_KEY_DEL },
+	{ 0x09, BB_KEY_PAGEUP },
+	{ 0x0a, BB_KEY_PAGEDOWN },
+};
+
+static int efi_read_key(struct efi_console_priv *priv, bool wait)
+{
+	unsigned long index;
+	efi_status_t efiret;
+	struct efi_input_key k;
+	int i;
+
+	/* wait until key is pressed */
+	if (wait)
+		BS->wait_for_event(1, priv->in->wait_for_key, &index);
+
+        efiret = priv->in->read_key_stroke(efi_sys_table->con_in, &k);
+        if (EFI_ERROR(efiret))
+		return -efi_errno(efiret);
+
+	/* 32 bit modifier keys + 16 bit scan code + 16 bit unicode */
+	for (i = 0; i < ARRAY_SIZE(ctrlkeys); i++) {
+		if (ctrlkeys[i].scan_code == k.scan_code)
+			return ctrlkeys[i].bb_key;
+
+	}
+
+	return k.unicode_char & 0xff;
+}
+
+static void efi_console_putc(struct console_device *cdev, char c)
+{
+	uint16_t str[2] = {};
+	struct efi_simple_text_output_protocol *con_out = efi_sys_table->con_out;
+
+	str[0] = c;
+
+	con_out->output_string(con_out, str);
+}
+
+static void clear_to_eol(struct efi_console_priv *priv)
+{
+	int pos = priv->out->mode->cursor_column;
+
+	priv->out->output_string(priv->out, priv->blank_line + pos);
+}
+
+static int efi_process_square_bracket(struct efi_console_priv *priv, const char *inp)
+{
+	int x, y;
+	char *endp;
+
+	inp++;
+
+	switch (*inp) {
+	case 'A':
+		/* Cursor up */
+	case 'B':
+		/* Cursor down */
+	case 'C':
+		/* Cursor right */
+	case 'D':
+		/* Cursor left */
+	case 'H':
+		/* home */
+	case 'F':
+		/* end */
+		return 3;
+	case 'K':
+		clear_to_eol(priv);
+		return 3;
+	}
+
+	if (*inp == '2' && *(inp + 1) == 'J') {
+		priv->out->clear_screen(priv->out);
+		return 4;
+	}
+
+	if (*inp == '0' && *(inp + 1) == 'm') {
+		priv->out->set_attribute(priv->out,
+				EFI_TEXT_ATTR(EFI_WHITE, EFI_BLACK));
+		return 4;
+	}
+
+	if (*inp == '7' && *(inp + 1) == 'm') {
+		priv->out->set_attribute(priv->out,
+				EFI_TEXT_ATTR(EFI_BLACK, priv->current_color));
+		return 4;
+	}
+
+	if (*inp == '1' &&
+			*(inp + 1) == ';' &&
+			*(inp + 2) == '3' &&
+			*(inp + 3) &&
+			*(inp + 4) == 'm') {
+		int color;
+		switch (*(inp + 3)) {
+		case '1': color = EFI_RED; break;
+		case '4': color = EFI_BLUE; break;
+		case '2': color = EFI_GREEN; break;
+		case '6': color = EFI_CYAN; break;
+		case '3': color = EFI_YELLOW; break;
+		case '5': color = EFI_MAGENTA; break;
+		case '7': color = EFI_WHITE; break;
+		default: color = EFI_WHITE; break;
+		}
+
+		priv->current_color = color;
+
+		priv->out->set_attribute(priv->out,
+				EFI_TEXT_ATTR(color, EFI_BLACK));
+		return 7;
+	}
+
+	y = simple_strtoul(inp, &endp, 10);
+	if (*endp == ';') {
+		x = simple_strtoul(endp + 1, &endp, 10);
+		if (*endp == 'H') {
+			priv->out->set_cursor_position(priv->out, x - 1, y - 1);
+			return endp - inp + 3;
+		}
+	}
+
+	return 8;
+}
+
+static int efi_process_key(struct efi_console_priv *priv, const char *inp)
+{
+	char c;
+
+	c = *inp;
+
+	if (c != 27)
+		return 0;
+
+	inp++;
+
+	if (*inp == '[')
+		return efi_process_square_bracket(priv, inp);
+
+	return 1;
+}
+
+static int efi_console_puts(struct console_device *cdev, const char *s)
+{
+	struct efi_console_priv *priv = to_efi(cdev);
+	int n = 0;
+
+	while (*s) {
+		if (*s == 27) {
+			priv->efi_console_buffer[n] = 0;
+			priv->out->output_string(priv->out,
+					priv->efi_console_buffer);
+			n = 0;
+			s += efi_process_key(priv, s);
+			continue;
+		}
+
+		if (*s == '\n')
+			priv->efi_console_buffer[n++] = '\r';
+		priv->efi_console_buffer[n] = *s;
+		s++;
+		n++;
+	}
+
+	priv->efi_console_buffer[n] = 0;
+
+	priv->out->output_string(priv->out, priv->efi_console_buffer);
+
+	return n;
+}
+
+static int efi_console_tstc(struct console_device *cdev)
+{
+	struct efi_console_priv *priv = to_efi(cdev);
+	int key;
+
+	if (priv->lastkey > 0)
+		return 1;
+
+	key = efi_read_key(priv, 0);
+	if (key < 0)
+		return 0;
+
+	priv->lastkey = key;
+
+	return 1;
+}
+
+static int efi_console_getc(struct console_device *cdev)
+{
+	struct efi_console_priv *priv = to_efi(cdev);
+	int key;
+
+	if (priv->lastkey > 0) {
+		key = priv->lastkey;
+		priv->lastkey = -1;
+		return key;
+	}
+
+	return efi_read_key(priv, 1);
+}
+
+static void efi_set_mode(struct efi_console_priv *priv)
+{
+#if 0
+	int i;
+	unsigned long rows, columns, best = 0, mode = 0;
+	efi_status_t efiret;
+
+	for (i = 0; i < priv->out->mode->max_mode; i++) {
+		priv->out->query_mode(priv->out, i, &columns, &rows);
+		printf("%d: %ld %ld\n", i, columns, rows);
+		if (rows * columns > best) {
+			best = rows * columns;
+			mode = i;
+		}
+	}
+
+	/*
+	 * Setting the mode doesn't work as expected. set_mode succeeds, but
+	 * the graphics resolution is not changed.
+	 */
+	priv->out->set_mode(priv->out, mode);
+#endif
+	priv->out->query_mode(priv->out, priv->out->mode->mode, &priv->columns, &priv->rows);
+}
+
+static int efi_console_probe(struct device_d *dev)
+{
+	struct console_device *cdev;
+	struct efi_console_priv *priv;
+	int i;
+
+	priv = xzalloc(sizeof(*priv));
+
+	priv->out = efi_sys_table->con_out;
+	priv->in = efi_sys_table->con_in;
+
+	priv->current_color = EFI_WHITE;
+
+	efi_set_mode(priv);
+
+	priv->out->enable_cursor(priv->out, 1);
+
+	priv->blank_line = xzalloc((priv->columns + 1) * sizeof(s16));
+	for (i = 0; i < priv->columns; i++)
+		priv->blank_line[i] = ' ';
+
+	cdev = &priv->cdev;
+	cdev->dev = dev;
+	cdev->tstc = efi_console_tstc;
+	cdev->getc = efi_console_getc;
+	cdev->putc = efi_console_putc;
+	cdev->puts = efi_console_puts;
+
+	priv->lastkey = -1;
+
+	return console_register(cdev);
+}
+
+static struct driver_d efi_console_driver = {
+        .name  = "efi-stdio",
+        .probe = efi_console_probe,
+};
+console_platform_driver(efi_console_driver);
-- 
2.0.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-07-08  8:50 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-08  8:49 Initial EFI Support Sascha Hauer
2014-07-08  8:49 ` [PATCH 01/21] Make IPaddr_t a 32bit type Sascha Hauer
2014-07-08  8:49 ` [PATCH 02/21] oftree command: Use size_t for size Sascha Hauer
2014-07-08  8:49 ` [PATCH 03/21] fat: Use correct format specifier Sascha Hauer
2014-07-08  8:50 ` [PATCH 04/21] readkey: keys are unsugned char Sascha Hauer
2014-07-08  8:50 ` [PATCH 05/21] of: platform: Use PRINTF_CONVERSION_RESOURCE for printing resources Sascha Hauer
2014-07-08  8:50 ` [PATCH 06/21] console: Add puts callback to console devices Sascha Hauer
2014-07-08  8:50 ` [PATCH 07/21] Add hex_byte_pack and hex_byte_pack_upper from kernel Sascha Hauer
2014-07-08  8:50 ` [PATCH 08/21] vsprintf: Support pU for printing UUIDs Sascha Hauer
2014-07-08  8:50 ` [PATCH 09/21] Add beginning wchar support Sascha Hauer
2014-07-11 12:35   ` Antony Pavlov
2014-07-14  6:05     ` Sascha Hauer
2014-07-08  8:50 ` [PATCH 10/21] block: Add flush callback Sascha Hauer
2014-07-08  8:50 ` [PATCH 11/21] Move efi.h to include/ Sascha Hauer
2014-07-08  8:50 ` [PATCH 12/21] filetype: Add DOS EXE file detection support Sascha Hauer
2014-07-08  8:50 ` [PATCH 13/21] efi: Add more error codes Sascha Hauer
2014-07-08  8:50 ` [PATCH 14/21] serial: ns16550: Add mmiobase to private data Sascha Hauer
2014-07-08  8:50 ` [PATCH 15/21] serial: ns16550: Add register read/write function pointers " Sascha Hauer
2014-07-08  8:50 ` [PATCH 16/21] Documentation: Add EFI documentation Sascha Hauer
2014-07-08  9:04   ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-08  8:50 ` [PATCH 17/21] Add initial EFI architecture support Sascha Hauer
2014-07-08  8:50 ` [PATCH 18/21] net: Add EFI Simple Network Protocol Driver Sascha Hauer
2014-07-08  8:50 ` Sascha Hauer [this message]
2014-07-08  8:50 ` [PATCH 20/21] fs: implement EFI filesystem driver Sascha Hauer
2014-07-08  8:50 ` [PATCH 21/21] fs: implement EFI variable " Sascha Hauer
2014-07-08  8:53 ` Initial EFI Support Jean-Christophe PLAGNIOL-VILLARD
2014-07-08  8:59   ` Sascha Hauer
2014-07-08  9:52     ` Sascha Hauer
2014-07-08 10:04 ` Jean-Christophe PLAGNIOL-VILLARD
2014-07-08 16:38 ` [PATCH 1/2] EFI: enable printf UUID support Jean-Christophe PLAGNIOL-VILLARD
2014-07-08 16:38   ` [PATCH 2/2] EFI: introduce efi_strguid to convert GUID to human readable names Jean-Christophe PLAGNIOL-VILLARD
2014-07-11  7:23     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1404809417-21477-20-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox