From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.phytec.co.uk ([217.6.246.34] helo=root.phytec.de) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1X4SDf-0006Hg-Oh for barebox@lists.infradead.org; Tue, 08 Jul 2014 10:01:52 +0000 Message-ID: <1404813679.8953.12.camel@lws-gamez.phytec.de> From: Teresa Gamez Date: Tue, 08 Jul 2014 12:01:19 +0200 In-Reply-To: <53BBBA05.6090403@ma-info.de> References: <53BA5442.6020708@ma-info.de> <53BA811B.5080403@ma-info.de> <20140707120019.GN23235@pengutronix.de> <899032957.1340888.1404736162014.open-xchange@oxbsltgw04.schlund.de> <53BBBA05.6090403@ma-info.de> Mime-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: Problems with pyhBoard-Wega-AM335x To: Frede Florian Cc: barebox@lists.infradead.org, Rolf Evers-Fischer Hello Florian, I guess you having the default kit WEGA, which does have 256MB RAM. The mainline supported phyCORE Kit does have 512MB. Thats probably why it does not start up. I'll have a look at it. Teresa Am Dienstag, den 08.07.2014, 11:29 +0200 schrieb Frede Florian: > Hello Rolf, > Hello Sascha, > > I tried your hints... but I don't get the prompt ">" after a while my > Desktop-PC say that a Ethernet connection is established thats all I can > not ping or connect to the pyhBoard-Wega-AM335x. But nothing is > transmitted on the Evaluation Board (PEB-EVAL-01). Do I need some > patches or something else? > > Sorry but I have no idea which information I can send you to help me > with my problem... > > Thanks again > > Florian > > Am 07.07.2014 14:29, schrieb Rolf Evers-Fischer: > > Hello Florian, > > > >> Sascha Hauer hat am 7. Juli 2014 um 14:00 > >> geschrieben: > >> > >> > >> On Mon, Jul 07, 2014 at 01:14:35PM +0200, Frede Florian wrote: > >>> Hello Rolf, > >>> > >>> thank you very much... > >>> after I selected the mentioned entry in the menu the problem was solved... > >>> but the board do not prompt any thing on the UART1... so I do not > >>> know if barebox is loaded > >> When using mainline barebox please build the am335x_mlo_defconfig for > >> the MLO and the am335x_defconfig for the main binary. The images > >> are then found under: > >> > >> images/barebox-am33xx-phytec-phycore-mlo.img > >> images/barebox-am33xx-phytec-phycore.img > >> > >> I diffed you config against the mainline config and the following > >> options are really crucial to let the binary work correctly: > >> > >> -CONFIG_TEXT_BASE=0x0 > >> -CONFIG_MALLOC_SIZE=0x0 > >> -CONFIG_MALLOC_TLSF=y > >> -CONFIG_RELOCATABLE=y > >> +CONFIG_TEXT_BASE=0x402F0400 > >> +CONFIG_STACK_SIZE=0x1600 > >> +CONFIG_MALLOC_SIZE=0x1000000 > >> > > in fact, these settings are essential. > > If you still can't see anything, you can also enable the config item "Debugging" > > -> "low level debug messages". With this option enabled, you should at least see > > a '>' on UART1 right after power-on. This character will be output at the end of > > function pcm051_board_init(). > > If you like to debug the further startup, you could also enable the "Debugging" > > -> "Trace initcalls" option in barebox_mlo config. > > > > Best regards, > > Rolf > > > > > _______________________________________________ > barebox mailing list > barebox@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/barebox _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox