mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders
@ 2014-07-10 20:07 Antony Pavlov
  2014-07-10 20:07 ` [PATCH v2 1/2] i2c: import SMBus stuff from linux Antony Pavlov
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Antony Pavlov @ 2014-07-10 20:07 UTC (permalink / raw)
  To: barebox

changes since RFC v1 patchseries:

  * gpio-pca953x.c: drop depricated devicetree parameters;
  * gpio-pca953x.c: add pca953x_gpio_get_direction();
  * move SMBus stuff from i2c.c to i2c-smbus.c, introduce CONFIG_I2C_SMBUS.

Antony Pavlov (2):
  i2c: import SMBus stuff from linux
  gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus
    I/O expanders

 drivers/gpio/Kconfig            |  21 ++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-pca953x.c     | 481 ++++++++++++++++++++++++++++++++++++++++
 drivers/i2c/Kconfig             |   3 +
 drivers/i2c/Makefile            |   1 +
 drivers/i2c/i2c-smbus.c         | 371 +++++++++++++++++++++++++++++++
 include/i2c/i2c.h               |  57 +++++
 include/platform_data/pca953x.h |  27 +++
 8 files changed, 962 insertions(+)
 create mode 100644 drivers/gpio/gpio-pca953x.c
 create mode 100644 drivers/i2c/i2c-smbus.c
 create mode 100644 include/platform_data/pca953x.h

-- 
2.0.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2 1/2] i2c: import SMBus stuff from linux
  2014-07-10 20:07 [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
@ 2014-07-10 20:07 ` Antony Pavlov
  2014-07-10 20:07 ` [PATCH v2 2/2] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
  2014-07-10 21:34 ` [PATCH v2 0/2] " Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Antony Pavlov @ 2014-07-10 20:07 UTC (permalink / raw)
  To: barebox

This patch imports i2c_smbus_{read,write}* functions from linux-3.15.

Here is a quote from linux.git/Documentation/i2c/smbus-protocol:

    If you write a driver for some I2C device, please try to use the SMBus
    commands if at all possible (if the device uses only that subset of the
    I2C protocol). This makes it possible to use the device driver on both
    SMBus adapters and I2C adapters (the SMBus command set is automatically
    translated to I2C on I2C adapters, but plain I2C commands can not be
    handled at all on most pure SMBus adapters).

So having i2c_smbus_{read,write}* functions in barebox makes
porting of linux i2c client drivers much easier as many drivers rely on
these smbus functions.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 drivers/i2c/Kconfig     |   3 +
 drivers/i2c/Makefile    |   1 +
 drivers/i2c/i2c-smbus.c | 371 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/i2c/i2c.h       |  57 ++++++++
 4 files changed, 432 insertions(+)

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 0c6aec3..8b5ad50 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -3,6 +3,9 @@ menuconfig I2C
 
 if I2C
 
+config I2C_SMBUS
+	bool
+
 source drivers/i2c/algos/Kconfig
 source drivers/i2c/busses/Kconfig
 
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 5ce0324..0f8fe84 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_I2C) += i2c.o busses/ algos/
+obj-$(CONFIG_I2C_SMBUS) += i2c-smbus.o
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
new file mode 100644
index 0000000..e8aeaa7
--- /dev/null
+++ b/drivers/i2c/i2c-smbus.c
@@ -0,0 +1,371 @@
+#include <common.h>
+#include <errno.h>
+#include <i2c/i2c.h>
+
+/* The SMBus parts */
+
+#define POLY    (0x1070U << 3)
+static u8 crc8(u16 data)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (data & 0x8000)
+			data = data ^ POLY;
+		data = data << 1;
+	}
+	return (u8)(data >> 8);
+}
+
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		crc = crc8((crc ^ p[i]) << 8);
+	return crc;
+}
+
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
+{
+	/* The address will be sent first */
+	u8 addr = (msg->addr << 1) | !!(msg->flags & I2C_M_RD);
+	pec = i2c_smbus_pec(pec, &addr, 1);
+
+	/* The data buffer follows */
+	return i2c_smbus_pec(pec, msg->buf, msg->len);
+}
+
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
+{
+	msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+	msg->len++;
+}
+
+/* Return <0 on CRC error
+   If there was a write before this read (most cases) we need to take the
+   partial CRC from the write part into account.
+   Note that this function does modify the message (we need to decrease the
+   message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
+{
+	u8 rpec = msg->buf[--msg->len];
+	cpec = i2c_smbus_msg_pec(cpec, msg);
+
+	if (rpec != cpec) {
+		pr_debug("i2c-core: Bad PEC 0x%02x vs. 0x%02x\n",
+			rpec, cpec);
+		return -EBADMSG;
+	}
+	return 0;
+}
+
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+				I2C_SMBUS_READ, 0,
+				I2C_SMBUS_BYTE, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
+{
+	return i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+				I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_BYTE_DATA, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+			      u8 value)
+{
+	union i2c_smbus_data data;
+	data.byte = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BYTE_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_WORD_DATA, &data);
+	return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+			      u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_WORD_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
+				  u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	status = i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_I2C_BLOCK_DATA, &data);
+	if (status < 0)
+		return status;
+
+	memcpy(values, &data.block[1], data.block[0]);
+	return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
+				   u8 length, const u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(data.block + 1, values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, 0 /* client->flags */,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
+
+/* Simulate a SMBus command using the i2c protocol
+   No checking of parameters is done!  */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+				   unsigned short flags,
+				   char read_write, u8 command, int size,
+				   union i2c_smbus_data *data)
+{
+	/* So we need to generate a series of msgs. In the case of writing, we
+	  need to use only one message; when reading, we need two. We initialize
+	  most things with sane defaults, to keep the code below somewhat
+	  simpler. */
+	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
+	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
+	int i;
+	u8 partial_pec = 0;
+	int status;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = addr,
+			.flags = flags,
+			.len = 1,
+			.buf = msgbuf0,
+		}, {
+			.addr = addr,
+			.flags = flags | I2C_M_RD,
+			.len = 0,
+			.buf = msgbuf1,
+		},
+	};
+
+	msgbuf0[0] = command;
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		msg[0].len = 0;
+		/* Special case: The read/write field is used as data */
+		msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+					I2C_M_RD : 0);
+		num = 1;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			/* Special case: only a read! */
+			msg[0].flags = I2C_M_RD | flags;
+			num = 1;
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 1;
+		else {
+			msg[0].len = 2;
+			msgbuf0[1] = data->byte;
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 2;
+		else {
+			msg[0].len = 3;
+			msgbuf0[1] = data->word & 0xff;
+			msgbuf0[2] = data->word >> 8;
+		}
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].len = data->block[0];
+		} else {
+			msg[0].len = data->block[0] + 1;
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
+				dev_err(&adapter->dev,
+					"Invalid block write size %d\n",
+					data->block[0]);
+				return -EINVAL;
+			}
+			for (i = 1; i <= data->block[0]; i++)
+				msgbuf0[i] = data->block[i];
+		}
+		break;
+	default:
+		dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+				      && size != I2C_SMBUS_I2C_BLOCK_DATA);
+	if (i) {
+		/* Compute PEC if first message is a write */
+		if (!(msg[0].flags & I2C_M_RD)) {
+			if (num == 1) /* Write only */
+				i2c_smbus_add_pec(&msg[0]);
+			else /* Write followed by read */
+				partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+		}
+		/* Ask for PEC if last message is a read */
+		if (msg[num-1].flags & I2C_M_RD)
+			msg[num-1].len++;
+	}
+
+	status = i2c_transfer(adapter, msg, num);
+	if (status < 0)
+		return status;
+
+	/* Check PEC if last message is a read */
+	if (i && (msg[num-1].flags & I2C_M_RD)) {
+		status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
+		if (status < 0)
+			return status;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = msgbuf0[0];
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = msgbuf1[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < data->block[0]; i++)
+				data->block[i+1] = msgbuf1[i];
+			break;
+		}
+	return 0;
+}
+
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int protocol,
+		   union i2c_smbus_data *data)
+{
+	s32 res;
+
+	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
+
+	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+				      command, protocol, data);
+
+	return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
diff --git a/include/i2c/i2c.h b/include/i2c/i2c.h
index a107f5e..4696f43 100644
--- a/include/i2c/i2c.h
+++ b/include/i2c/i2c.h
@@ -85,6 +85,63 @@ struct i2c_client {
 
 #define to_i2c_client(a)	container_of(a, struct i2c_client, dev)
 
+/*flags for the client struct: */
+#define I2C_CLIENT_PEC	0x04		/* Use Packet Error Checking */
+#define I2C_CLIENT_SCCB	0x9000		/* Use Omnivision SCCB protocol */
+					/* Must match I2C_M_STOP|IGNORE_NAK */
+
+/*
+ * Data for SMBus Messages
+ */
+#define I2C_SMBUS_BLOCK_MAX	32	/* As specified in SMBus standard */
+union i2c_smbus_data {
+	__u8 byte;
+	__u16 word;
+	__u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */
+			       /* and one more for user-space compatibility */
+};
+
+/* i2c_smbus_xfer read or write markers */
+#define I2C_SMBUS_READ	1
+#define I2C_SMBUS_WRITE	0
+
+/* SMBus transaction types (size parameter in the above functions)
+   Note: these no longer correspond to the (arbitrary) PIIX4 internal codes! */
+#define I2C_SMBUS_QUICK		    0
+#define I2C_SMBUS_BYTE		    1
+#define I2C_SMBUS_BYTE_DATA	    2
+#define I2C_SMBUS_WORD_DATA	    3
+#define I2C_SMBUS_I2C_BLOCK_DATA    8
+
+/* This is the very generalized SMBus access routine. You probably do not
+   want to use this, though; one of the functions below may be much easier,
+   and probably just as fast.
+   Note that we use i2c_adapter here, because you do not need a specific
+   smbus adapter to call this function. */
+extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data);
+
+/* Now follow the 'nice' access routines. These also document the calling
+   conventions of i2c_smbus_xfer. */
+
+extern s32 i2c_smbus_read_byte(const struct i2c_client *client);
+extern s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value);
+extern s32 i2c_smbus_read_byte_data(const struct i2c_client *client,
+				    u8 command);
+extern s32 i2c_smbus_write_byte_data(const struct i2c_client *client,
+				     u8 command, u8 value);
+extern s32 i2c_smbus_read_word_data(const struct i2c_client *client,
+				    u8 command);
+extern s32 i2c_smbus_write_word_data(const struct i2c_client *client,
+				     u8 command, u16 value);
+
+/* Returns the number of read bytes */
+extern s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client,
+					 u8 command, u8 length, u8 *values);
+extern s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client,
+					  u8 command, u8 length,
+					  const u8 *values);
 
 /**
  * struct i2c_board_info - template for device creation
-- 
2.0.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [PATCH v2 2/2] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders
  2014-07-10 20:07 [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
  2014-07-10 20:07 ` [PATCH v2 1/2] i2c: import SMBus stuff from linux Antony Pavlov
@ 2014-07-10 20:07 ` Antony Pavlov
  2014-07-10 21:34 ` [PATCH v2 0/2] " Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Antony Pavlov @ 2014-07-10 20:07 UTC (permalink / raw)
  To: barebox

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 drivers/gpio/Kconfig            |  21 ++
 drivers/gpio/Makefile           |   1 +
 drivers/gpio/gpio-pca953x.c     | 481 ++++++++++++++++++++++++++++++++++++++++
 include/platform_data/pca953x.h |  27 +++
 4 files changed, 530 insertions(+)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index f98a9c0..179c63d 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -64,6 +64,27 @@ config GPIO_ORION
 	  found on Marvell Orion and MVEBU SoCs (Armada 370/XP,
 	  Dove, Kirkwood, MV78x00, Orion5x).
 
+config GPIO_PCA953X
+	bool "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
+	depends on I2C
+	select I2C_SMBUS
+	help
+	  Say yes here to provide access to several register-oriented
+	  SMBus I/O expanders, made mostly by NXP or TI.  Compatible
+	  models include:
+
+	  4 bits:	pca9536, pca9537
+
+	  8 bits:	max7310, max7315, pca6107, pca9534, pca9538, pca9554,
+			pca9556, pca9557, pca9574, tca6408, xra1202
+
+	  16 bits:	max7312, max7313, pca9535, pca9539, pca9555, pca9575,
+			tca6416
+
+	  24 bits:	tca6424
+
+	  40 bits:	pca9505, pca9698
+
 config GPIO_PL061
 	bool "PrimeCell PL061 GPIO support"
 	depends on ARM_AMBA
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 22d2ac0..ece5efd 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_GPIO_JZ4740)	+= gpio-jz4740.o
 obj-$(CONFIG_GPIO_MALTA_FPGA_I2C) += gpio-malta-fpga-i2c.o
 obj-$(CONFIG_GPIO_ORION)	+= gpio-orion.o
 obj-$(CONFIG_GPIO_OMAP)		+= gpio-omap.o
+obj-$(CONFIG_GPIO_PCA953X)	+= gpio-pca953x.o
 obj-$(CONFIG_GPIO_PL061)	+= gpio-pl061.o
 obj-$(CONFIG_GPIO_STMPE)	+= gpio-stmpe.o
 obj-$(CONFIG_GPIO_TEGRA)	+= gpio-tegra.o
diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
new file mode 100644
index 0000000..aabbb09
--- /dev/null
+++ b/drivers/gpio/gpio-pca953x.c
@@ -0,0 +1,481 @@
+/*
+ *  PCA953x 4/8/16/24/40 bit I/O ports
+ *
+ *  This code was ported from linux-3.15 kernel by Antony Pavlov.
+ *
+ *  Copyright (C) 2005 Ben Gardner <bgardner@wabtec.com>
+ *  Copyright (C) 2007 Marvell International Ltd.
+ *
+ *  Derived from drivers/i2c/chips/pca9539.c
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; version 2 of the License.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <malloc.h>
+#include <driver.h>
+#include <xfuncs.h>
+#include <errno.h>
+#include <i2c/i2c.h>
+
+#include <gpio.h>
+#include <platform_data/pca953x.h>
+
+#define PCA953X_INPUT		0
+#define PCA953X_OUTPUT		1
+#define PCA953X_INVERT		2
+#define PCA953X_DIRECTION	3
+
+#define REG_ADDR_AI		0x80
+
+#define PCA957X_IN		0
+#define PCA957X_INVRT		1
+#define PCA957X_BKEN		2
+#define PCA957X_PUPD		3
+#define PCA957X_CFG		4
+#define PCA957X_OUT		5
+#define PCA957X_MSK		6
+#define PCA957X_INTS		7
+
+#define PCA_GPIO_MASK		0x00FF
+#define PCA_INT			0x0100
+#define PCA953X_TYPE		0x1000
+#define PCA957X_TYPE		0x2000
+
+static struct platform_device_id pca953x_id[] = {
+	{ "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9534", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9535", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9536", 4  | PCA953X_TYPE, },
+	{ "pca9537", 4  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9538", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9539", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9554", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca9555", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "pca9556", 8  | PCA953X_TYPE, },
+	{ "pca9557", 8  | PCA953X_TYPE, },
+	{ "pca9574", 8  | PCA957X_TYPE | PCA_INT, },
+	{ "pca9575", 16 | PCA957X_TYPE | PCA_INT, },
+	{ "pca9698", 40 | PCA953X_TYPE, },
+
+	{ "max7310", 8  | PCA953X_TYPE, },
+	{ "max7312", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7313", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "max7315", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "pca6107", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6408", 8  | PCA953X_TYPE | PCA_INT, },
+	{ "tca6416", 16 | PCA953X_TYPE | PCA_INT, },
+	{ "tca6424", 24 | PCA953X_TYPE | PCA_INT, },
+	{ "xra1202", 8  | PCA953X_TYPE },
+	{ }
+};
+
+#define MAX_BANK 5
+#define BANK_SZ 8
+
+#define NBANK(chip) (chip->gpio_chip.ngpio / BANK_SZ)
+
+struct pca953x_chip {
+	unsigned gpio_start;
+	u8 reg_output[MAX_BANK];
+	u8 reg_direction[MAX_BANK];
+	struct i2c_client *client;
+	struct gpio_chip gpio_chip;
+	const char *const *names;
+	int	chip_type;
+};
+
+static inline struct pca953x_chip *to_pca(struct gpio_chip *gc)
+{
+	return container_of(gc, struct pca953x_chip, gpio_chip);
+}
+
+static int pca953x_read_single(struct pca953x_chip *chip, int reg, u32 *val,
+				int off)
+{
+	int ret;
+	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
+	int offset = off / BANK_SZ;
+
+	ret = i2c_smbus_read_byte_data(chip->client,
+				(reg << bank_shift) + offset);
+	*val = ret;
+
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed reading register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pca953x_write_single(struct pca953x_chip *chip, int reg, u32 val,
+				int off)
+{
+	int ret = 0;
+	int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
+	int offset = off / BANK_SZ;
+
+	ret = i2c_smbus_write_byte_data(chip->client,
+					(reg << bank_shift) + offset, val);
+
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed writing register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pca953x_write_regs(struct pca953x_chip *chip, int reg, u8 *val)
+{
+	int ret = 0;
+
+	if (chip->gpio_chip.ngpio <= 8)
+		ret = i2c_smbus_write_byte_data(chip->client, reg, *val);
+	else if (chip->gpio_chip.ngpio >= 24) {
+		int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
+		ret = i2c_smbus_write_i2c_block_data(chip->client,
+					(reg << bank_shift) | REG_ADDR_AI,
+					NBANK(chip), val);
+	} else {
+		switch (chip->chip_type) {
+		case PCA953X_TYPE:
+			ret = i2c_smbus_write_word_data(chip->client,
+							reg << 1, (u16) *val);
+			break;
+		case PCA957X_TYPE:
+			ret = i2c_smbus_write_byte_data(chip->client, reg << 1,
+							val[0]);
+			if (ret < 0)
+				break;
+			ret = i2c_smbus_write_byte_data(chip->client,
+							(reg << 1) + 1,
+							val[1]);
+			break;
+		}
+	}
+
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed writing register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pca953x_read_regs(struct pca953x_chip *chip, int reg, u8 *val)
+{
+	int ret;
+
+	if (chip->gpio_chip.ngpio <= 8) {
+		ret = i2c_smbus_read_byte_data(chip->client, reg);
+		*val = ret;
+	} else if (chip->gpio_chip.ngpio >= 24) {
+		int bank_shift = fls((chip->gpio_chip.ngpio - 1) / BANK_SZ);
+
+		ret = i2c_smbus_read_i2c_block_data(chip->client,
+					(reg << bank_shift) | REG_ADDR_AI,
+					NBANK(chip), val);
+	} else {
+		ret = i2c_smbus_read_word_data(chip->client, reg << 1);
+		val[0] = (u16)ret & 0xFF;
+		val[1] = (u16)ret >> 8;
+	}
+	if (ret < 0) {
+		dev_err(&chip->client->dev, "failed reading register\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pca953x_gpio_direction_input(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = to_pca(gc);
+	u8 reg_val;
+	int ret, offset = 0;
+
+	reg_val = chip->reg_direction[off / BANK_SZ] | (1u << (off % BANK_SZ));
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_DIRECTION;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_CFG;
+		break;
+	}
+	ret = pca953x_write_single(chip, offset, reg_val, off);
+	if (ret)
+		goto exit;
+
+	chip->reg_direction[off / BANK_SZ] = reg_val;
+	ret = 0;
+exit:
+	return ret;
+}
+
+static int pca953x_gpio_direction_output(struct gpio_chip *gc,
+		unsigned off, int val)
+{
+	struct pca953x_chip *chip = to_pca(gc);
+	u8 reg_val;
+	int ret, offset = 0;
+
+	/* set output level */
+	if (val)
+		reg_val = chip->reg_output[off / BANK_SZ]
+			| (1u << (off % BANK_SZ));
+	else
+		reg_val = chip->reg_output[off / BANK_SZ]
+			& ~(1u << (off % BANK_SZ));
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_OUTPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_OUT;
+		break;
+	}
+	ret = pca953x_write_single(chip, offset, reg_val, off);
+	if (ret)
+		goto exit;
+
+	chip->reg_output[off / BANK_SZ] = reg_val;
+
+	/* then direction */
+	reg_val = chip->reg_direction[off / BANK_SZ] & ~(1u << (off % BANK_SZ));
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_DIRECTION;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_CFG;
+		break;
+	}
+	ret = pca953x_write_single(chip, offset, reg_val, off);
+	if (ret)
+		goto exit;
+
+	chip->reg_direction[off / BANK_SZ] = reg_val;
+	ret = 0;
+exit:
+	return ret;
+}
+
+static int pca953x_gpio_get_direction(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = to_pca(gc);
+	u8 reg_val;
+
+	reg_val = chip->reg_direction[off / BANK_SZ] & (1u << (off % BANK_SZ));
+
+	if (reg_val)
+		return GPIOF_DIR_IN;
+
+	return GPIOF_DIR_OUT;
+}
+
+static int pca953x_gpio_get_value(struct gpio_chip *gc, unsigned off)
+{
+	struct pca953x_chip *chip = to_pca(gc);
+	u32 reg_val;
+	int ret, offset = 0;
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_INPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_IN;
+		break;
+	}
+	ret = pca953x_read_single(chip, offset, &reg_val, off);
+	if (ret < 0) {
+		/* NOTE:  diagnostic already emitted; that's all we should
+		 * do unless gpio_*_value_cansleep() calls become different
+		 * from their nonsleeping siblings (and report faults).
+		 */
+		return 0;
+	}
+
+	return (reg_val & (1u << (off % BANK_SZ))) ? 1 : 0;
+}
+
+static void pca953x_gpio_set_value(struct gpio_chip *gc, unsigned off, int val)
+{
+	struct pca953x_chip *chip = to_pca(gc);
+	u8 reg_val;
+	int ret, offset = 0;
+
+	if (val)
+		reg_val = chip->reg_output[off / BANK_SZ]
+			| (1u << (off % BANK_SZ));
+	else
+		reg_val = chip->reg_output[off / BANK_SZ]
+			& ~(1u << (off % BANK_SZ));
+
+	switch (chip->chip_type) {
+	case PCA953X_TYPE:
+		offset = PCA953X_OUTPUT;
+		break;
+	case PCA957X_TYPE:
+		offset = PCA957X_OUT;
+		break;
+	}
+	ret = pca953x_write_single(chip, offset, reg_val, off);
+	if (ret)
+		goto exit;
+
+	chip->reg_output[off / BANK_SZ] = reg_val;
+exit:
+	return;
+}
+
+static struct gpio_ops pca953x_gpio_ops = {
+	.direction_input  = pca953x_gpio_direction_input,
+	.direction_output = pca953x_gpio_direction_output,
+	.get_direction = pca953x_gpio_get_direction,
+	.get = pca953x_gpio_get_value,
+	.set = pca953x_gpio_set_value,
+};
+
+static void pca953x_setup_gpio(struct pca953x_chip *chip, int gpios)
+{
+	struct gpio_chip *gc;
+
+	gc = &chip->gpio_chip;
+
+	gc->ops = &pca953x_gpio_ops;
+
+	gc->base = chip->gpio_start;
+	gc->ngpio = gpios;
+	gc->dev = &chip->client->dev;
+}
+
+static int device_pca953x_init(struct pca953x_chip *chip, u32 invert)
+{
+	int ret;
+	u8 val[MAX_BANK];
+
+	ret = pca953x_read_regs(chip, PCA953X_OUTPUT, chip->reg_output);
+	if (ret)
+		goto out;
+
+	ret = pca953x_read_regs(chip, PCA953X_DIRECTION,
+			       chip->reg_direction);
+	if (ret)
+		goto out;
+
+	/* set platform specific polarity inversion */
+	if (invert)
+		memset(val, 0xFF, NBANK(chip));
+	else
+		memset(val, 0, NBANK(chip));
+
+	ret = pca953x_write_regs(chip, PCA953X_INVERT, val);
+out:
+	return ret;
+}
+
+static int device_pca957x_init(struct pca953x_chip *chip, u32 invert)
+{
+	int ret;
+	u8 val[MAX_BANK];
+
+	ret = pca953x_read_regs(chip, PCA957X_OUT, chip->reg_output);
+	if (ret)
+		goto out;
+	ret = pca953x_read_regs(chip, PCA957X_CFG, chip->reg_direction);
+	if (ret)
+		goto out;
+
+	/* set platform specific polarity inversion */
+	if (invert)
+		memset(val, 0xFF, NBANK(chip));
+	else
+		memset(val, 0, NBANK(chip));
+	pca953x_write_regs(chip, PCA957X_INVRT, val);
+
+	/* To enable register 6, 7 to controll pull up and pull down */
+	memset(val, 0x02, NBANK(chip));
+	pca953x_write_regs(chip, PCA957X_BKEN, val);
+
+	return 0;
+out:
+	return ret;
+}
+
+static int pca953x_probe(struct device_d *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	unsigned long driver_data;
+	struct pca953x_platform_data *pdata;
+	struct pca953x_chip *chip;
+	int ret;
+	u32 invert = 0;
+
+	chip = xzalloc(sizeof(struct pca953x_chip));
+
+	driver_data = 0;
+	pdata = dev->platform_data;
+	if (pdata) {
+		chip->gpio_start = pdata->gpio_base;
+		invert = pdata->invert;
+		chip->names = pdata->names;
+	} else {
+		int err;
+
+		err = dev_get_drvdata(dev, &driver_data);
+		if (err)
+			return err;
+
+		chip->gpio_start = -1;
+	}
+
+	chip->client = client;
+
+	chip->chip_type = driver_data & (PCA953X_TYPE | PCA957X_TYPE);
+
+	/* initialize cached registers from their original values.
+	 * we can't share this chip with another i2c master.
+	 */
+	pca953x_setup_gpio(chip, driver_data & PCA_GPIO_MASK);
+
+	if (chip->chip_type == PCA953X_TYPE)
+		ret = device_pca953x_init(chip, invert);
+	else
+		ret = device_pca957x_init(chip, invert);
+	if (ret)
+		return ret;
+
+	ret = gpiochip_add(&chip->gpio_chip);
+	if (ret)
+		return ret;
+
+	if (pdata && pdata->setup) {
+		ret = pdata->setup(client, chip->gpio_chip.base,
+				chip->gpio_chip.ngpio, pdata->context);
+		if (ret < 0)
+			dev_warn(&client->dev, "setup failed, %d\n", ret);
+	}
+
+	return 0;
+}
+
+static struct driver_d pca953x_driver = {
+	.name	= "pca953x",
+	.probe		= pca953x_probe,
+	.id_table	= pca953x_id,
+};
+
+static int __init pca953x_init(void)
+{
+	return i2c_driver_register(&pca953x_driver);
+}
+device_initcall(pca953x_init);
diff --git a/include/platform_data/pca953x.h b/include/platform_data/pca953x.h
new file mode 100644
index 0000000..cfd253e
--- /dev/null
+++ b/include/platform_data/pca953x.h
@@ -0,0 +1,27 @@
+#ifndef _LINUX_PCA953X_H
+#define _LINUX_PCA953X_H
+
+#include <linux/types.h>
+#include <i2c/i2c.h>
+
+/* platform data for the PCA9539 16-bit I/O expander driver */
+
+struct pca953x_platform_data {
+	/* number of the first GPIO */
+	unsigned	gpio_base;
+
+	/* initial polarity inversion setting */
+	u32		invert;
+
+	void		*context;	/* param to setup/teardown */
+
+	int		(*setup)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	int		(*teardown)(struct i2c_client *client,
+				unsigned gpio, unsigned ngpio,
+				void *context);
+	const char	*const *names;
+};
+
+#endif /* _LINUX_PCA953X_H */
-- 
2.0.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders
  2014-07-10 20:07 [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
  2014-07-10 20:07 ` [PATCH v2 1/2] i2c: import SMBus stuff from linux Antony Pavlov
  2014-07-10 20:07 ` [PATCH v2 2/2] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
@ 2014-07-10 21:34 ` Sascha Hauer
  2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2014-07-10 21:34 UTC (permalink / raw)
  To: Antony Pavlov; +Cc: barebox

On Fri, Jul 11, 2014 at 12:07:23AM +0400, Antony Pavlov wrote:
> changes since RFC v1 patchseries:
> 
>   * gpio-pca953x.c: drop depricated devicetree parameters;
>   * gpio-pca953x.c: add pca953x_gpio_get_direction();
>   * move SMBus stuff from i2c.c to i2c-smbus.c, introduce CONFIG_I2C_SMBUS.
> 
> Antony Pavlov (2):
>   i2c: import SMBus stuff from linux
>   gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus
>     I/O expanders

Applied, thanks

Sascha

> 
>  drivers/gpio/Kconfig            |  21 ++
>  drivers/gpio/Makefile           |   1 +
>  drivers/gpio/gpio-pca953x.c     | 481 ++++++++++++++++++++++++++++++++++++++++
>  drivers/i2c/Kconfig             |   3 +
>  drivers/i2c/Makefile            |   1 +
>  drivers/i2c/i2c-smbus.c         | 371 +++++++++++++++++++++++++++++++
>  include/i2c/i2c.h               |  57 +++++
>  include/platform_data/pca953x.h |  27 +++
>  8 files changed, 962 insertions(+)
>  create mode 100644 drivers/gpio/gpio-pca953x.c
>  create mode 100644 drivers/i2c/i2c-smbus.c
>  create mode 100644 include/platform_data/pca953x.h
> 
> -- 
> 2.0.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2014-07-10 21:34 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-07-10 20:07 [PATCH v2 0/2] add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
2014-07-10 20:07 ` [PATCH v2 1/2] i2c: import SMBus stuff from linux Antony Pavlov
2014-07-10 20:07 ` [PATCH v2 2/2] gpio: add driver for PCA95[357]x, PCA9698, TCA64xx, and MAX7310 SMBus I/O expanders Antony Pavlov
2014-07-10 21:34 ` [PATCH v2 0/2] " Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox