* [PATCH 01/23] USB: gadget: Update to 3.15
2014-07-21 15:14 USB Gadget updates Sascha Hauer
@ 2014-07-21 15:14 ` Sascha Hauer
2014-07-21 15:14 ` [PATCH 02/23] USB: gadget: dequeue descriptor before freeing it Sascha Hauer
` (21 subsequent siblings)
22 siblings, 0 replies; 26+ messages in thread
From: Sascha Hauer @ 2014-07-21 15:14 UTC (permalink / raw)
To: barebox
This updates the USB Gadget stack to Linux-3.15.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
commands/usbserial.c | 22 +-
drivers/usb/core/Makefile | 1 +
drivers/usb/core/common.c | 19 +
drivers/usb/core/usb.c | 1 +
drivers/usb/gadget/Kconfig | 2 +-
drivers/usb/gadget/Makefile | 2 +-
drivers/usb/gadget/at91_udc.c | 121 ++--
drivers/usb/gadget/composite.c | 1182 ++++++++++++++++++++++++++++++-------
drivers/usb/gadget/config.c | 128 +++-
drivers/usb/gadget/dfu.c | 12 +-
drivers/usb/gadget/epautoconf.c | 233 +++++---
drivers/usb/gadget/f_acm.c | 300 ++++++----
drivers/usb/gadget/f_serial.c | 197 ++++---
drivers/usb/gadget/fsl_udc.c | 70 +--
drivers/usb/gadget/functions.c | 99 ++++
drivers/usb/gadget/gadget_chips.h | 60 +-
drivers/usb/gadget/pxa27x_udc.c | 37 +-
drivers/usb/gadget/serial.c | 263 +++++----
drivers/usb/gadget/u_serial.c | 254 ++++----
drivers/usb/gadget/u_serial.h | 16 +-
drivers/usb/gadget/udc-core.c | 357 +++++++++++
include/usb/ch9.h | 241 +++++++-
include/usb/composite.h | 232 ++++++--
include/usb/gadget.h | 234 ++++++--
include/usb/usbserial.h | 6 +-
25 files changed, 3054 insertions(+), 1035 deletions(-)
create mode 100644 drivers/usb/core/common.c
create mode 100644 drivers/usb/gadget/functions.c
create mode 100644 drivers/usb/gadget/udc-core.c
diff --git a/commands/usbserial.c b/commands/usbserial.c
index e4c2f18..7e82112 100644
--- a/commands/usbserial.c
+++ b/commands/usbserial.c
@@ -34,7 +34,7 @@ static int do_usbserial(int argc, char *argv[])
char *manufacturer = "barebox";
const char *productname = barebox_get_model();
u16 idVendor = 0, idProduct = 0;
- int mode = 0;
+ int acm = 1;
while ((opt = getopt(argc, argv, "m:p:V:P:asd")) > 0) {
switch (opt) {
@@ -51,15 +51,10 @@ static int do_usbserial(int argc, char *argv[])
idProduct = simple_strtoul(optarg, NULL, 0);
break;
case 'a':
- mode = 0;
+ acm = 1;
break;
-#ifdef HAVE_OBEX
- case 'o':
- mode = 1;
- break;
-#endif
case 's':
- mode = 2;
+ acm = 0;
break;
case 'd':
usb_serial_unregister();
@@ -71,7 +66,7 @@ static int do_usbserial(int argc, char *argv[])
pdata.productname = productname;
pdata.idVendor = idVendor;
pdata.idProduct = idProduct;
- pdata.mode = mode;
+ pdata.acm = acm;
return usb_serial_register(&pdata);
}
@@ -85,9 +80,6 @@ BAREBOX_CMD_HELP_OPT ("-p STR", "product string")
BAREBOX_CMD_HELP_OPT ("-V ID", "vendor id")
BAREBOX_CMD_HELP_OPT ("-P ID", "product id")
BAREBOX_CMD_HELP_OPT ("-a", "CDC ACM (default)")
-#ifdef HAVE_OBEX
-BAREBOX_CMD_HELP_OPT ("-o", "CDC OBEX")
-#endif
BAREBOX_CMD_HELP_OPT ("-s", "Generic Serial")
BAREBOX_CMD_HELP_OPT ("-d", "Disable the serial gadget")
BAREBOX_CMD_HELP_END
@@ -95,11 +87,7 @@ BAREBOX_CMD_HELP_END
BAREBOX_CMD_START(usbserial)
.cmd = do_usbserial,
BAREBOX_CMD_DESC("serial gadget enable/disable")
- BAREBOX_CMD_OPTS("[-mpVPa"
-#ifdef HAVE_OBEX
- "o"
-#endif
- "sd] <description>")
+ BAREBOX_CMD_OPTS("[-mpVPasd] <description>")
BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
BAREBOX_CMD_HELP(cmd_usbserial_help)
BAREBOX_CMD_END
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index dc7e635..58f6c5e 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -1,2 +1,3 @@
obj-$(CONFIG_USB_HOST) += usb.o hub.o
+obj-$(CONFIG_USB) += common.o
obj-$(CONFIG_OFDEVICE) += of.o
diff --git a/drivers/usb/core/common.c b/drivers/usb/core/common.c
new file mode 100644
index 0000000..690d5a3
--- /dev/null
+++ b/drivers/usb/core/common.c
@@ -0,0 +1,19 @@
+#include <common.h>
+#include <usb/ch9.h>
+
+static const char *const speed_names[] = {
+ [USB_SPEED_UNKNOWN] = "UNKNOWN",
+ [USB_SPEED_LOW] = "low-speed",
+ [USB_SPEED_FULL] = "full-speed",
+ [USB_SPEED_HIGH] = "high-speed",
+ [USB_SPEED_WIRELESS] = "wireless",
+ [USB_SPEED_SUPER] = "super-speed",
+};
+
+const char *usb_speed_string(enum usb_device_speed speed)
+{
+ if (speed < 0 || speed >= ARRAY_SIZE(speed_names))
+ speed = USB_SPEED_UNKNOWN;
+ return speed_names[speed];
+}
+EXPORT_SYMBOL_GPL(usb_speed_string);
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index fdf9d94..351e783 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -51,6 +51,7 @@
#include <dma.h>
#include <usb/usb.h>
+#include <usb/ch9.h>
#include "usb.h"
#include "hub.h"
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 7d5a346..806bb16 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -45,7 +45,7 @@ config USB_GADGET_DFU
config USB_GADGET_SERIAL
bool
- depends on EXPERIMENTAL && !CONSOLE_NONE
+ depends on !CONSOLE_NONE
prompt "Serial Gadget"
endif
diff --git a/drivers/usb/gadget/Makefile b/drivers/usb/gadget/Makefile
index 367d7ce..9bd28ec 100644
--- a/drivers/usb/gadget/Makefile
+++ b/drivers/usb/gadget/Makefile
@@ -1,5 +1,5 @@
-obj-$(CONFIG_USB_GADGET) += composite.o config.o usbstring.o epautoconf.o
+obj-$(CONFIG_USB_GADGET) += composite.o config.o usbstring.o epautoconf.o udc-core.o functions.o config.o
obj-$(CONFIG_USB_GADGET_SERIAL) += u_serial.o serial.o f_serial.o f_acm.o
obj-$(CONFIG_USB_GADGET_DFU) += dfu.o
obj-$(CONFIG_USB_GADGET_DRIVER_ARC) += fsl_udc.o
diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c
index 2768ddd..2b19be9 100644
--- a/drivers/usb/gadget/at91_udc.c
+++ b/drivers/usb/gadget/at91_udc.c
@@ -749,20 +749,6 @@ static int at91_set_selfpowered(struct usb_gadget *gadget, int is_on)
return 0;
}
-static const struct usb_gadget_ops at91_udc_ops = {
- .get_frame = at91_get_frame,
- .wakeup = at91_wakeup,
- .set_selfpowered = at91_set_selfpowered,
- .vbus_session = at91_vbus_session,
- .pullup = at91_pullup,
-
- /*
- * VBUS-powered devices may also also want to support bigger
- * power budgets after an appropriate SET_CONFIGURATION.
- */
- /* .vbus_power = at91_vbus_power, */
-};
-
/*-------------------------------------------------------------------------*/
static int handle_ep(struct at91_ep *ep)
@@ -1244,6 +1230,49 @@ static void at91_udc_irq (void *_udc)
}
}
+static int at91_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
+{
+ struct at91_udc *udc = container_of(gadget, struct at91_udc, gadget);
+
+ if (!udc->iclk)
+ return -ENODEV;
+
+ udc->driver = driver;
+ udc->enabled = 1;
+ udc->selfpowered = 1;
+
+ DBG(udc, "bound to %s\n", driver->function);
+ return 0;
+}
+
+static int at91_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
+{
+ struct at91_udc *udc = container_of(gadget, struct at91_udc, gadget);
+
+ udc->enabled = 0;
+ at91_udp_write(udc, AT91_UDP_IDR, ~0);
+ udc->driver = NULL;
+
+ DBG(udc, "unbound from %s\n", driver->function);
+ return 0;
+}
+
+static const struct usb_gadget_ops at91_udc_ops = {
+ .get_frame = at91_get_frame,
+ .wakeup = at91_wakeup,
+ .set_selfpowered = at91_set_selfpowered,
+ .vbus_session = at91_vbus_session,
+ .pullup = at91_pullup,
+
+ /*
+ * VBUS-powered devices may also also want to support bigger
+ * power budgets after an appropriate SET_CONFIGURATION.
+ */
+ /* .vbus_power = at91_vbus_power, */
+ .udc_start = at91_udc_start,
+ .udc_stop = at91_udc_stop,
+};
+
/*-------------------------------------------------------------------------*/
static struct at91_udc controller = {
@@ -1346,66 +1375,6 @@ int usb_gadget_poll(void)
return value;
}
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
-{
- struct at91_udc *udc = &controller;
- int retval;
-
- if (!udc->iclk)
- return -ENODEV;
-
- if (!driver
- || driver->speed < USB_SPEED_FULL
- || !driver->bind
- || !driver->setup) {
- DBG(udc, "bad parameter.\n");
- return -EINVAL;
- }
-
- if (udc->driver) {
- DBG(udc, "UDC already has a gadget driver\n");
- return -EBUSY;
- }
-
- udc->driver = driver;
- udc->enabled = 1;
- udc->selfpowered = 1;
-
- retval = driver->bind(&udc->gadget);
- if (retval) {
- DBG(udc, "bind() returned %d\n", retval);
- udc->driver = NULL;
- udc->enabled = 0;
- udc->selfpowered = 0;
- return retval;
- }
-
- pullup(udc, 1);
-
- DBG(udc, "bound to %s\n", driver->function);
- return 0;
-}
-EXPORT_SYMBOL (usb_gadget_register_driver);
-
-int usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
-{
- struct at91_udc *udc = &controller;
-
- if (!driver || driver != udc->driver || !driver->unbind)
- return -EINVAL;
-
- udc->enabled = 0;
- at91_udp_write(udc, AT91_UDP_IDR, ~0);
- pullup(udc, 0);
-
- driver->unbind(&udc->gadget);
- udc->driver = NULL;
-
- DBG(udc, "unbound from %s\n", driver->function);
- return 0;
-}
-EXPORT_SYMBOL (usb_gadget_unregister_driver);
-
/*-------------------------------------------------------------------------*/
static void at91_udc_poller(struct poller_struct *poller)
@@ -1513,6 +1482,10 @@ static int __init at91udc_probe(struct device_d *dev)
poller_register(&poller);
+ retval = usb_add_gadget_udc_release(dev, &udc->gadget, NULL);
+ if (retval)
+ goto fail0a;
+
INFO(udc, "%s version %s\n", driver_name, DRIVER_VERSION);
return 0;
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index 71d0ecf..d6638fe 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -7,12 +7,6 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
*/
/* #define VERBOSE_DEBUG */
@@ -20,10 +14,13 @@
#include <common.h>
#include <errno.h>
#include <dma.h>
+#include <linux/err.h>
+#include <linux/bitmap.h>
#include <usb/composite.h>
+#include <asm/unaligned.h>
#include <asm/byteorder.h>
-#define CONFIG_USB_GADGET_VBUS_DRAW 2
+static unsigned int usb_gadget_vbus_draw_ma = 2;
/*
* The code in this file is utility code, used to build a gadget driver
@@ -32,24 +29,139 @@
* with the relevant device-wide data.
*/
-/* big enough to hold our biggest descriptor */
-#define USB_BUFSIZ 512
+static struct usb_gadget_strings **get_containers_gs(
+ struct usb_gadget_string_container *uc)
+{
+ return (struct usb_gadget_strings **)uc->stash;
+}
-static struct usb_composite_driver *composite;
+/**
+ * next_ep_desc() - advance to the next EP descriptor
+ * @t: currect pointer within descriptor array
+ *
+ * Return: next EP descriptor or NULL
+ *
+ * Iterate over @t until either EP descriptor found or
+ * NULL (that indicates end of list) encountered
+ */
+static struct usb_descriptor_header**
+next_ep_desc(struct usb_descriptor_header **t)
+{
+ for (; *t; t++) {
+ if ((*t)->bDescriptorType == USB_DT_ENDPOINT)
+ return t;
+ }
+ return NULL;
+}
-/* Some systems will need runtime overrides for the product identifers
- * published in the device descriptor, either numbers or strings or both.
- * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+/*
+ * for_each_ep_desc()- iterate over endpoint descriptors in the
+ * descriptors list
+ * @start: pointer within descriptor array.
+ * @ep_desc: endpoint descriptor to use as the loop cursor
*/
+#define for_each_ep_desc(start, ep_desc) \
+ for (ep_desc = next_ep_desc(start); \
+ ep_desc; ep_desc = next_ep_desc(ep_desc+1))
-static ushort idVendor;
-static ushort idProduct;
-static ushort bcdDevice;
-static char *iManufacturer;
-static char *iProduct;
-static char *iSerialNumber;
+/**
+ * config_ep_by_speed() - configures the given endpoint
+ * according to gadget speed.
+ * @g: pointer to the gadget
+ * @f: usb function
+ * @_ep: the endpoint to configure
+ *
+ * Return: error code, 0 on success
+ *
+ * This function chooses the right descriptors for a given
+ * endpoint according to gadget speed and saves it in the
+ * endpoint desc field. If the endpoint already has a descriptor
+ * assigned to it - overwrites it with currently corresponding
+ * descriptor. The endpoint maxpacket field is updated according
+ * to the chosen descriptor.
+ * Note: the supplied function should hold all the descriptors
+ * for supported speeds
+ */
+int config_ep_by_speed(struct usb_gadget *g,
+ struct usb_function *f,
+ struct usb_ep *_ep)
+{
+ struct usb_composite_dev *cdev = get_gadget_data(g);
+ struct usb_endpoint_descriptor *chosen_desc = NULL;
+ struct usb_descriptor_header **speed_desc = NULL;
-/*-------------------------------------------------------------------------*/
+ struct usb_ss_ep_comp_descriptor *comp_desc = NULL;
+ int want_comp_desc = 0;
+
+ struct usb_descriptor_header **d_spd; /* cursor for speed desc */
+
+ if (!g || !f || !_ep)
+ return -EIO;
+
+ /* select desired speed */
+ switch (g->speed) {
+ case USB_SPEED_SUPER:
+ if (gadget_is_superspeed(g)) {
+ speed_desc = f->ss_descriptors;
+ want_comp_desc = 1;
+ break;
+ }
+ /* else: Fall trough */
+ case USB_SPEED_HIGH:
+ if (gadget_is_dualspeed(g)) {
+ speed_desc = f->hs_descriptors;
+ break;
+ }
+ /* else: fall through */
+ default:
+ speed_desc = f->fs_descriptors;
+ }
+ /* find descriptors */
+ for_each_ep_desc(speed_desc, d_spd) {
+ chosen_desc = (struct usb_endpoint_descriptor *)*d_spd;
+ if (chosen_desc->bEndpointAddress == _ep->address)
+ goto ep_found;
+ }
+ return -EIO;
+
+ep_found:
+ /* commit results */
+ _ep->maxpacket = usb_endpoint_maxp(chosen_desc);
+ _ep->desc = chosen_desc;
+ _ep->comp_desc = NULL;
+ _ep->maxburst = 0;
+ _ep->mult = 0;
+ if (!want_comp_desc)
+ return 0;
+
+ /*
+ * Companion descriptor should follow EP descriptor
+ * USB 3.0 spec, #9.6.7
+ */
+ comp_desc = (struct usb_ss_ep_comp_descriptor *)*(++d_spd);
+ if (!comp_desc ||
+ (comp_desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP))
+ return -EIO;
+ _ep->comp_desc = comp_desc;
+ if (g->speed == USB_SPEED_SUPER) {
+ switch (usb_endpoint_type(_ep->desc)) {
+ case USB_ENDPOINT_XFER_ISOC:
+ /* mult: bits 1:0 of bmAttributes */
+ _ep->mult = comp_desc->bmAttributes & 0x3;
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ _ep->maxburst = comp_desc->bMaxBurst + 1;
+ break;
+ default:
+ if (comp_desc->bMaxBurst != 0)
+ ERROR(cdev, "ep0 bMaxBurst must be 0\n");
+ _ep->maxburst = 1;
+ break;
+ }
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(config_ep_by_speed);
/**
* usb_add_function() - add a function to a configuration
@@ -65,7 +177,7 @@ static char *iSerialNumber;
* This function returns the value of the function's bind(), which is
* zero for success else a negative errno value.
*/
-int __init usb_add_function(struct usb_configuration *config,
+int usb_add_function(struct usb_configuration *config,
struct usb_function *function)
{
int value = -EINVAL;
@@ -95,10 +207,12 @@ int __init usb_add_function(struct usb_configuration *config,
* as full speed ... it's the function drivers that will need
* to avoid bulk and ISO transfers.
*/
- if (!config->fullspeed && function->descriptors)
- config->fullspeed = 1;
+ if (!config->fullspeed && function->fs_descriptors)
+ config->fullspeed = true;
if (!config->highspeed && function->hs_descriptors)
- config->highspeed = 1;
+ config->highspeed = true;
+ if (!config->superspeed && function->ss_descriptors)
+ config->superspeed = true;
done:
if (value)
@@ -106,6 +220,19 @@ done:
function->name, function, value);
return value;
}
+EXPORT_SYMBOL_GPL(usb_add_function);
+
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f)
+{
+ if (f->disable)
+ f->disable(f);
+
+ bitmap_zero(f->endpoints, 32);
+ list_del(&f->list);
+ if (f->unbind)
+ f->unbind(c, f);
+}
+EXPORT_SYMBOL_GPL(usb_remove_function);
/**
* usb_function_deactivate - prevent function and gadget enumeration
@@ -138,6 +265,7 @@ int usb_function_deactivate(struct usb_function *function)
return status;
}
+EXPORT_SYMBOL_GPL(usb_function_deactivate);
/**
* usb_function_activate - allow function and gadget enumeration
@@ -154,7 +282,7 @@ int usb_function_activate(struct usb_function *function)
struct usb_composite_dev *cdev = function->config->cdev;
int status = 0;
- if (cdev->deactivations == 0)
+ if (WARN_ON(cdev->deactivations == 0))
status = -EINVAL;
else {
cdev->deactivations--;
@@ -164,6 +292,7 @@ int usb_function_activate(struct usb_function *function)
return status;
}
+EXPORT_SYMBOL_GPL(usb_function_activate);
/**
* usb_interface_id() - allocate an unused interface ID
@@ -174,21 +303,21 @@ int usb_function_activate(struct usb_function *function)
* usb_interface_id() is called from usb_function.bind() callbacks to
* allocate new interface IDs. The function driver will then store that
* ID in interface, association, CDC union, and other descriptors. It
- * will also handle any control requests targetted at that interface,
+ * will also handle any control requests targeted at that interface,
* particularly changing its altsetting via set_alt(). There may
* also be class-specific or vendor-specific requests to handle.
*
* All interface identifier should be allocated using this routine, to
* ensure that for example different functions don't wrongly assign
* different meanings to the same identifier. Note that since interface
- * identifers are configuration-specific, functions used in more than
+ * identifiers are configuration-specific, functions used in more than
* one configuration (or more than once in a given configuration) need
* multiple versions of the relevant descriptors.
*
* Returns the interface ID which was allocated; or -ENODEV if no
* more interface IDs can be allocated.
*/
-int __init usb_interface_id(struct usb_configuration *config,
+int usb_interface_id(struct usb_configuration *config,
struct usb_function *function)
{
unsigned id = config->next_interface_id;
@@ -200,16 +329,37 @@ int __init usb_interface_id(struct usb_configuration *config,
}
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(usb_interface_id);
+
+static u8 encode_bMaxPower(enum usb_device_speed speed,
+ struct usb_configuration *c)
+{
+ unsigned val;
+
+ if (c->MaxPower)
+ val = c->MaxPower;
+ else
+ val = usb_gadget_vbus_draw_ma;
+ if (!val)
+ return 0;
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ return DIV_ROUND_UP(val, 8);
+ default:
+ return DIV_ROUND_UP(val, 2);
+ }
+}
static int config_buf(struct usb_configuration *config,
enum usb_device_speed speed, void *buf, u8 type)
{
- struct usb_config_descriptor *c;
+ struct usb_config_descriptor *c = buf;
void *next = buf + USB_DT_CONFIG_SIZE;
- int len = USB_BUFSIZ - USB_DT_CONFIG_SIZE;
+ int len;
struct usb_function *f;
int status;
+ len = USB_COMP_EP0_BUFSIZ - USB_DT_CONFIG_SIZE;
/* write the config descriptor */
c = buf;
c->bLength = USB_DT_CONFIG_SIZE;
@@ -219,7 +369,7 @@ static int config_buf(struct usb_configuration *config,
c->bConfigurationValue = config->bConfigurationValue;
c->iConfiguration = config->iConfiguration;
c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
- c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
+ c->bMaxPower = encode_bMaxPower(speed, config);
/* There may be e.g. OTG descriptors */
if (config->descriptors) {
@@ -235,10 +385,17 @@ static int config_buf(struct usb_configuration *config,
list_for_each_entry(f, &config->functions, list) {
struct usb_descriptor_header **descriptors;
- if (speed == USB_SPEED_HIGH)
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ descriptors = f->ss_descriptors;
+ break;
+ case USB_SPEED_HIGH:
descriptors = f->hs_descriptors;
- else
- descriptors = f->descriptors;
+ break;
+ default:
+ descriptors = f->fs_descriptors;
+ }
+
if (!descriptors)
continue;
status = usb_descriptor_fillbuf(next, len,
@@ -261,9 +418,10 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
u8 type = w_value >> 8;
enum usb_device_speed speed = USB_SPEED_UNKNOWN;
- if (gadget_is_dualspeed(gadget)) {
- int hs = 0;
-
+ if (gadget->speed == USB_SPEED_SUPER)
+ speed = gadget->speed;
+ else if (gadget_is_dualspeed(gadget)) {
+ int hs = 0;
if (gadget->speed == USB_SPEED_HIGH)
hs = 1;
if (type == USB_DT_OTHER_SPEED_CONFIG)
@@ -277,13 +435,20 @@ static int config_desc(struct usb_composite_dev *cdev, unsigned w_value)
w_value &= 0xff;
list_for_each_entry(c, &cdev->configs, list) {
/* ignore configs that won't work at this speed */
- if (speed == USB_SPEED_HIGH) {
+ switch (speed) {
+ case USB_SPEED_SUPER:
+ if (!c->superspeed)
+ continue;
+ break;
+ case USB_SPEED_HIGH:
if (!c->highspeed)
continue;
- } else {
+ break;
+ default:
if (!c->fullspeed)
continue;
}
+
if (w_value == 0)
return config_buf(c, speed, cdev->req->buf, type);
w_value--;
@@ -297,16 +462,22 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
struct usb_configuration *c;
unsigned count = 0;
int hs = 0;
+ int ss = 0;
if (gadget_is_dualspeed(gadget)) {
if (gadget->speed == USB_SPEED_HIGH)
hs = 1;
+ if (gadget->speed == USB_SPEED_SUPER)
+ ss = 1;
if (type == USB_DT_DEVICE_QUALIFIER)
hs = !hs;
}
list_for_each_entry(c, &cdev->configs, list) {
/* ignore configs that won't work at this speed */
- if (hs) {
+ if (ss) {
+ if (!c->superspeed)
+ continue;
+ } else if (hs) {
if (!c->highspeed)
continue;
} else {
@@ -318,6 +489,71 @@ static int count_configs(struct usb_composite_dev *cdev, unsigned type)
return count;
}
+/**
+ * bos_desc() - prepares the BOS descriptor.
+ * @cdev: pointer to usb_composite device to generate the bos
+ * descriptor for
+ *
+ * This function generates the BOS (Binary Device Object)
+ * descriptor and its device capabilities descriptors. The BOS
+ * descriptor should be supported by a SuperSpeed device.
+ */
+static int bos_desc(struct usb_composite_dev *cdev)
+{
+ struct usb_ext_cap_descriptor *usb_ext;
+ struct usb_ss_cap_descriptor *ss_cap;
+ struct usb_dcd_config_params dcd_config_params;
+ struct usb_bos_descriptor *bos = cdev->req->buf;
+
+ bos->bLength = USB_DT_BOS_SIZE;
+ bos->bDescriptorType = USB_DT_BOS;
+
+ bos->wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE);
+ bos->bNumDeviceCaps = 0;
+
+ /*
+ * A SuperSpeed device shall include the USB2.0 extension descriptor
+ * and shall support LPM when operating in USB2.0 HS mode.
+ */
+ usb_ext = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+ bos->bNumDeviceCaps++;
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_EXT_CAP_SIZE);
+ usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
+ usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+ usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
+ usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+
+ /*
+ * The Superspeed USB Capability descriptor shall be implemented by all
+ * SuperSpeed devices.
+ */
+ ss_cap = cdev->req->buf + le16_to_cpu(bos->wTotalLength);
+ bos->bNumDeviceCaps++;
+ le16_add_cpu(&bos->wTotalLength, USB_DT_USB_SS_CAP_SIZE);
+ ss_cap->bLength = USB_DT_USB_SS_CAP_SIZE;
+ ss_cap->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
+ ss_cap->bDevCapabilityType = USB_SS_CAP_TYPE;
+ ss_cap->bmAttributes = 0; /* LTM is not supported yet */
+ ss_cap->wSpeedSupported = cpu_to_le16(USB_LOW_SPEED_OPERATION |
+ USB_FULL_SPEED_OPERATION |
+ USB_HIGH_SPEED_OPERATION |
+ USB_5GBPS_OPERATION);
+ ss_cap->bFunctionalitySupport = USB_LOW_SPEED_OPERATION;
+
+ /* Get Controller configuration */
+ if (cdev->gadget->ops->get_config_params)
+ cdev->gadget->ops->get_config_params(&dcd_config_params);
+ else {
+ dcd_config_params.bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT;
+ dcd_config_params.bU2DevExitLat =
+ cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT);
+ }
+ ss_cap->bU1devExitLat = dcd_config_params.bU1devExitLat;
+ ss_cap->bU2DevExitLat = dcd_config_params.bU2DevExitLat;
+
+ return le16_to_cpu(bos->wTotalLength);
+}
+
static void device_qual(struct usb_composite_dev *cdev)
{
struct usb_qualifier_descriptor *qual = cdev->req->buf;
@@ -330,7 +566,7 @@ static void device_qual(struct usb_composite_dev *cdev)
qual->bDeviceSubClass = cdev->desc.bDeviceSubClass;
qual->bDeviceProtocol = cdev->desc.bDeviceProtocol;
/* ASSUME same EP0 fifo size at both speeds */
- qual->bMaxPacketSize0 = cdev->desc.bMaxPacketSize0;
+ qual->bMaxPacketSize0 = cdev->gadget->ep0->maxpacket;
qual->bNumConfigurations = count_configs(cdev, USB_DT_DEVICE_QUALIFIER);
qual->bRESERVED = 0;
}
@@ -346,8 +582,11 @@ static void reset_config(struct usb_composite_dev *cdev)
list_for_each_entry(f, &cdev->config->functions, list) {
if (f->disable)
f->disable(f);
+
+ bitmap_zero(f->endpoints, 32);
}
cdev->config = NULL;
+ cdev->delayed_status = 0;
}
static int set_config(struct usb_composite_dev *cdev,
@@ -359,29 +598,31 @@ static int set_config(struct usb_composite_dev *cdev,
unsigned power = gadget_is_otg(gadget) ? 8 : 100;
int tmp;
- if (cdev->config)
- reset_config(cdev);
-
if (number) {
list_for_each_entry(c, &cdev->configs, list) {
if (c->bConfigurationValue == number) {
+ /*
+ * We disable the FDs of the previous
+ * configuration only if the new configuration
+ * is a valid one
+ */
+ if (cdev->config)
+ reset_config(cdev);
result = 0;
break;
}
}
if (result < 0)
goto done;
- } else
+ } else { /* Zero configuration value - need to reset the config */
+ if (cdev->config)
+ reset_config(cdev);
result = 0;
+ }
- INFO(cdev, "%s speed config #%d: %s\n",
- ({ char *speed;
- switch (gadget->speed) {
- case USB_SPEED_LOW: speed = "low"; break;
- case USB_SPEED_FULL: speed = "full"; break;
- case USB_SPEED_HIGH: speed = "high"; break;
- default: speed = "?"; break;
- } ; speed; }), number, c ? c->label : "unconfigured");
+ INFO(cdev, "%s config #%d: %s\n",
+ usb_speed_string(gadget->speed),
+ number, c ? c->label : "unconfigured");
if (!c)
goto done;
@@ -391,10 +632,41 @@ static int set_config(struct usb_composite_dev *cdev,
/* Initialize all interfaces by setting them to altsetting zero. */
for (tmp = 0; tmp < MAX_CONFIG_INTERFACES; tmp++) {
struct usb_function *f = c->interface[tmp];
+ struct usb_descriptor_header **descriptors;
if (!f)
break;
+ /*
+ * Record which endpoints are used by the function. This is used
+ * to dispatch control requests targeted at that endpoint to the
+ * function's setup callback instead of the current
+ * configuration's setup callback.
+ */
+ switch (gadget->speed) {
+ case USB_SPEED_SUPER:
+ descriptors = f->ss_descriptors;
+ break;
+ case USB_SPEED_HIGH:
+ descriptors = f->hs_descriptors;
+ break;
+ default:
+ descriptors = f->fs_descriptors;
+ }
+
+ for (; *descriptors; ++descriptors) {
+ struct usb_endpoint_descriptor *ep;
+ int addr;
+
+ if ((*descriptors)->bDescriptorType != USB_DT_ENDPOINT)
+ continue;
+
+ ep = (struct usb_endpoint_descriptor *)*descriptors;
+ addr = ((ep->bEndpointAddress & 0x80) >> 3)
+ | (ep->bEndpointAddress & 0x0f);
+ set_bit(addr, f->endpoints);
+ }
+
result = f->set_alt(f, tmp, 0);
if (result < 0) {
DBG(cdev, "interface %d (%s/%p) alt 0 --> %d\n",
@@ -403,65 +675,106 @@ static int set_config(struct usb_composite_dev *cdev,
reset_config(cdev);
goto done;
}
+
+ if (result == USB_GADGET_DELAYED_STATUS) {
+ DBG(cdev,
+ "%s: interface %d (%s) requested delayed status\n",
+ __func__, tmp, f->name);
+ cdev->delayed_status++;
+ DBG(cdev, "delayed_status count %d\n",
+ cdev->delayed_status);
+ }
}
/* when we return, be sure our power usage is valid */
- power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
+ power = c->MaxPower ? c->MaxPower : usb_gadget_vbus_draw_ma;
done:
usb_gadget_vbus_draw(gadget, power);
+ if (result >= 0 && cdev->delayed_status)
+ result = USB_GADGET_DELAYED_STATUS;
return result;
}
+int usb_add_config_only(struct usb_composite_dev *cdev,
+ struct usb_configuration *config)
+{
+ struct usb_configuration *c;
+
+ if (!config->bConfigurationValue)
+ return -EINVAL;
+
+ /* Prevent duplicate configuration identifiers */
+ list_for_each_entry(c, &cdev->configs, list) {
+ if (c->bConfigurationValue == config->bConfigurationValue)
+ return -EBUSY;
+ }
+
+ config->cdev = cdev;
+ list_add_tail(&config->list, &cdev->configs);
+
+ INIT_LIST_HEAD(&config->functions);
+ config->next_interface_id = 0;
+ memset(config->interface, 0, sizeof(config->interface));
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_add_config_only);
+
/**
* usb_add_config() - add a configuration to a device.
* @cdev: wraps the USB gadget
* @config: the configuration, with bConfigurationValue assigned
+ * @bind: the configuration's bind function
* Context: single threaded during gadget setup
*
- * One of the main tasks of a composite driver's bind() routine is to
+ * One of the main tasks of a composite @bind() routine is to
* add each of the configurations it supports, using this routine.
*
- * This function returns the value of the configuration's bind(), which
+ * This function returns the value of the configuration's @bind(), which
* is zero for success else a negative errno value. Binding configurations
* assigns global resources including string IDs, and per-configuration
* resources such as interface IDs and endpoints.
*/
-int __init usb_add_config(struct usb_composite_dev *cdev,
- struct usb_configuration *config)
+int usb_add_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *config,
+ int (*bind)(struct usb_configuration *))
{
int status = -EINVAL;
- struct usb_configuration *c;
+
+ if (!bind)
+ goto done;
DBG(cdev, "adding config #%u '%s'/%p\n",
config->bConfigurationValue,
config->label, config);
- if (!config->bConfigurationValue || !config->bind)
+ status = usb_add_config_only(cdev, config);
+ if (status)
goto done;
- /* Prevent duplicate configuration identifiers */
- list_for_each_entry(c, &cdev->configs, list) {
- if (c->bConfigurationValue == config->bConfigurationValue) {
- status = -EBUSY;
- goto done;
- }
- }
-
- config->cdev = cdev;
- list_add_tail(&config->list, &cdev->configs);
-
- INIT_LIST_HEAD(&config->functions);
- config->next_interface_id = 0;
-
- status = config->bind(config);
+ status = bind(config);
if (status < 0) {
+ while (!list_empty(&config->functions)) {
+ struct usb_function *f;
+
+ f = list_first_entry(&config->functions,
+ struct usb_function, list);
+ list_del(&f->list);
+ if (f->unbind) {
+ DBG(cdev, "unbind function '%s'/%p\n",
+ f->name, f);
+ f->unbind(config, f);
+ /* may free memory for "f" */
+ }
+ }
list_del(&config->list);
config->cdev = NULL;
} else {
unsigned i;
- DBG(cdev, "cfg %d/%p speeds:%s%s\n",
+ DBG(cdev, "cfg %d/%p speeds:%s%s%s\n",
config->bConfigurationValue, config,
+ config->superspeed ? " super" : "",
config->highspeed ? " high" : "",
config->fullspeed
? (gadget_is_dualspeed(cdev->gadget)
@@ -479,7 +792,7 @@ int __init usb_add_config(struct usb_composite_dev *cdev,
}
}
- /* set_alt(), or next config->bind(), sets up
+ /* set_alt(), or next bind(), sets up
* ep->driver_data as needed.
*/
usb_ep_autoconfig_reset(cdev->gadget);
@@ -490,6 +803,48 @@ done:
config->bConfigurationValue, status);
return status;
}
+EXPORT_SYMBOL_GPL(usb_add_config);
+
+static void remove_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *config)
+{
+ while (!list_empty(&config->functions)) {
+ struct usb_function *f;
+
+ f = list_first_entry(&config->functions,
+ struct usb_function, list);
+ list_del(&f->list);
+ if (f->unbind) {
+ DBG(cdev, "unbind function '%s'/%p\n", f->name, f);
+ f->unbind(config, f);
+ /* may free memory for "f" */
+ }
+ }
+ list_del(&config->list);
+ if (config->unbind) {
+ DBG(cdev, "unbind config '%s'/%p\n", config->label, config);
+ config->unbind(config);
+ /* may free memory for "c" */
+ }
+}
+
+/**
+ * usb_remove_config() - remove a configuration from a device.
+ * @cdev: wraps the USB gadget
+ * @config: the configuration
+ *
+ * Drivers must call usb_gadget_disconnect before calling this function
+ * to disconnect the device from the host and make sure the host will not
+ * try to enumerate the device while we are changing the config list.
+ */
+void usb_remove_config(struct usb_composite_dev *cdev,
+ struct usb_configuration *config)
+{
+ if (cdev->config == config)
+ reset_config(cdev);
+
+ remove_config(cdev, config);
+}
/*-------------------------------------------------------------------------*/
@@ -502,7 +857,7 @@ done:
static void collect_langs(struct usb_gadget_strings **sp, __le16 *buf)
{
const struct usb_gadget_strings *s;
- u16 language;
+ __le16 language;
__le16 *tmp;
while (*sp) {
@@ -542,6 +897,8 @@ static int lookup_string(
static int get_string(struct usb_composite_dev *cdev,
void *buf, u16 language, int id)
{
+ struct usb_composite_driver *composite = cdev->driver;
+ struct usb_gadget_string_container *uc;
struct usb_configuration *c;
struct usb_function *f;
int len;
@@ -574,8 +931,14 @@ static int get_string(struct usb_composite_dev *cdev,
collect_langs(sp, s->wData);
}
}
+ list_for_each_entry(uc, &cdev->gstrings, list) {
+ struct usb_gadget_strings **sp;
- for (len = 0; s->wData[len] && len <= 126; len++)
+ sp = get_containers_gs(uc);
+ collect_langs(sp, s->wData);
+ }
+
+ for (len = 0; len <= 126 && s->wData[len]; len++)
continue;
if (!len)
return -EINVAL;
@@ -584,9 +947,18 @@ static int get_string(struct usb_composite_dev *cdev,
return s->bLength;
}
- /* Otherwise, look up and return a specified string. String IDs
- * are device-scoped, so we look up each string table we're told
- * about. These lookups are infrequent; simpler-is-better here.
+ list_for_each_entry(uc, &cdev->gstrings, list) {
+ struct usb_gadget_strings **sp;
+
+ sp = get_containers_gs(uc);
+ len = lookup_string(sp, buf, language, id);
+ if (len > 0)
+ return len;
+ }
+
+ /* String IDs are device-scoped, so we look up each string
+ * table we're told about. These lookups are infrequent;
+ * simpler-is-better here.
*/
if (composite->strings) {
len = lookup_string(composite->strings, buf, language, id);
@@ -619,19 +991,197 @@ static int get_string(struct usb_composite_dev *cdev,
* string IDs. Drivers for functions, configurations, or gadgets will
* then store that ID in the appropriate descriptors and string table.
*
- * All string identifier should be allocated using this routine, to
- * ensure that for example different functions don't wrongly assign
- * different meanings to the same identifier.
+ * All string identifier should be allocated using this,
+ * @usb_string_ids_tab() or @usb_string_ids_n() routine, to ensure
+ * that for example different functions don't wrongly assign different
+ * meanings to the same identifier.
*/
-int __init usb_string_id(struct usb_composite_dev *cdev)
+int usb_string_id(struct usb_composite_dev *cdev)
{
if (cdev->next_string_id < 254) {
- /* string id 0 is reserved */
+ /* string id 0 is reserved by USB spec for list of
+ * supported languages */
+ /* 255 reserved as well? -- mina86 */
cdev->next_string_id++;
return cdev->next_string_id;
}
return -ENODEV;
}
+EXPORT_SYMBOL_GPL(usb_string_id);
+
+/**
+ * usb_string_ids() - allocate unused string IDs in batch
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * @str: an array of usb_string objects to assign numbers to
+ * Context: single threaded during gadget setup
+ *
+ * @usb_string_ids() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then copy IDs from the string table to the appropriate descriptors
+ * and string table for other languages.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_tab(struct usb_composite_dev *cdev, struct usb_string *str)
+{
+ int next = cdev->next_string_id;
+
+ for (; str->s; ++str) {
+ if (unlikely(next >= 254))
+ return -ENODEV;
+ str->id = ++next;
+ }
+
+ cdev->next_string_id = next;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_string_ids_tab);
+
+static struct usb_gadget_string_container *copy_gadget_strings(
+ struct usb_gadget_strings **sp, unsigned n_gstrings,
+ unsigned n_strings)
+{
+ struct usb_gadget_string_container *uc;
+ struct usb_gadget_strings **gs_array;
+ struct usb_gadget_strings *gs;
+ struct usb_string *s;
+ unsigned mem;
+ unsigned n_gs;
+ unsigned n_s;
+ void *stash;
+
+ mem = sizeof(*uc);
+ mem += sizeof(void *) * (n_gstrings + 1);
+ mem += sizeof(struct usb_gadget_strings) * n_gstrings;
+ mem += sizeof(struct usb_string) * (n_strings + 1) * (n_gstrings);
+ uc = kmalloc(mem, GFP_KERNEL);
+ if (!uc)
+ return ERR_PTR(-ENOMEM);
+ gs_array = get_containers_gs(uc);
+ stash = uc->stash;
+ stash += sizeof(void *) * (n_gstrings + 1);
+ for (n_gs = 0; n_gs < n_gstrings; n_gs++) {
+ struct usb_string *org_s;
+
+ gs_array[n_gs] = stash;
+ gs = gs_array[n_gs];
+ stash += sizeof(struct usb_gadget_strings);
+ gs->language = sp[n_gs]->language;
+ gs->strings = stash;
+ org_s = sp[n_gs]->strings;
+
+ for (n_s = 0; n_s < n_strings; n_s++) {
+ s = stash;
+ stash += sizeof(struct usb_string);
+ if (org_s->s)
+ s->s = org_s->s;
+ else
+ s->s = "";
+ org_s++;
+ }
+ s = stash;
+ s->s = NULL;
+ stash += sizeof(struct usb_string);
+
+ }
+ gs_array[n_gs] = NULL;
+ return uc;
+}
+
+/**
+ * usb_gstrings_attach() - attach gadget strings to a cdev and assign ids
+ * @cdev: the device whose string descriptor IDs are being allocated
+ * and attached.
+ * @sp: an array of usb_gadget_strings to attach.
+ * @n_strings: number of entries in each usb_strings array (sp[]->strings)
+ *
+ * This function will create a deep copy of usb_gadget_strings and usb_string
+ * and attach it to the cdev. The actual string (usb_string.s) will not be
+ * copied but only a referenced will be made. The struct usb_gadget_strings
+ * array may contain multiple languges and should be NULL terminated.
+ * The ->language pointer of each struct usb_gadget_strings has to contain the
+ * same amount of entries.
+ * For instance: sp[0] is en-US, sp[1] is es-ES. It is expected that the first
+ * usb_string entry of es-ES containts the translation of the first usb_string
+ * entry of en-US. Therefore both entries become the same id assign.
+ */
+struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+ struct usb_gadget_strings **sp, unsigned n_strings)
+{
+ struct usb_gadget_string_container *uc;
+ struct usb_gadget_strings **n_gs;
+ unsigned n_gstrings = 0;
+ unsigned i;
+ int ret;
+
+ for (i = 0; sp[i]; i++)
+ n_gstrings++;
+
+ if (!n_gstrings)
+ return ERR_PTR(-EINVAL);
+
+ uc = copy_gadget_strings(sp, n_gstrings, n_strings);
+ if (IS_ERR(uc))
+ return ERR_CAST(uc);
+
+ n_gs = get_containers_gs(uc);
+ ret = usb_string_ids_tab(cdev, n_gs[0]->strings);
+ if (ret)
+ goto err;
+
+ for (i = 1; i < n_gstrings; i++) {
+ struct usb_string *m_s;
+ struct usb_string *s;
+ unsigned n;
+
+ m_s = n_gs[0]->strings;
+ s = n_gs[i]->strings;
+ for (n = 0; n < n_strings; n++) {
+ s->id = m_s->id;
+ s++;
+ m_s++;
+ }
+ }
+ list_add_tail(&uc->list, &cdev->gstrings);
+ return n_gs[0]->strings;
+err:
+ kfree(uc);
+ return ERR_PTR(ret);
+}
+EXPORT_SYMBOL_GPL(usb_gstrings_attach);
+
+/**
+ * usb_string_ids_n() - allocate unused string IDs in batch
+ * @c: the device whose string descriptor IDs are being allocated
+ * @n: number of string IDs to allocate
+ * Context: single threaded during gadget setup
+ *
+ * Returns the first requested ID. This ID and next @n-1 IDs are now
+ * valid IDs. At least provided that @n is non-zero because if it
+ * is, returns last requested ID which is now very useful information.
+ *
+ * @usb_string_ids_n() is called from bind() callbacks to allocate
+ * string IDs. Drivers for functions, configurations, or gadgets will
+ * then store that ID in the appropriate descriptors and string table.
+ *
+ * All string identifier should be allocated using this,
+ * @usb_string_id() or @usb_string_ids_n() routine, to ensure that for
+ * example different functions don't wrongly assign different meanings
+ * to the same identifier.
+ */
+int usb_string_ids_n(struct usb_composite_dev *c, unsigned n)
+{
+ unsigned next = c->next_string_id;
+ if (unlikely(n > 254 || (unsigned)next + n > 254))
+ return -ENODEV;
+ c->next_string_id += n;
+ return next + 1;
+}
+EXPORT_SYMBOL_GPL(usb_string_ids_n);
/*-------------------------------------------------------------------------*/
@@ -650,17 +1200,19 @@ static void composite_setup_complete(struct usb_ep *ep, struct usb_request *req)
* housekeeping for the gadget function we're implementing. Most of
* the work is in config and function specific setup.
*/
-static int
+int
composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
struct usb_request *req = cdev->req;
int value = -EOPNOTSUPP;
+ int status = 0;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u8 intf = w_index & 0xFF;
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
struct usb_function *f = NULL;
+ u8 endp;
/* partial re-init of the response message; the function or the
* gadget might need to intercept e.g. a control-OUT completion
@@ -668,7 +1220,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
*/
req->zero = 0;
req->complete = composite_setup_complete;
- req->length = USB_BUFSIZ;
+ req->length = 0;
gadget->ep0->driver_data = cdev;
switch (ctrl->bRequest) {
@@ -682,18 +1234,31 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
case USB_DT_DEVICE:
cdev->desc.bNumConfigurations =
count_configs(cdev, USB_DT_DEVICE);
+ cdev->desc.bMaxPacketSize0 =
+ cdev->gadget->ep0->maxpacket;
+ if (gadget_is_superspeed(gadget)) {
+ if (gadget->speed >= USB_SPEED_SUPER) {
+ cdev->desc.bcdUSB = cpu_to_le16(0x0300);
+ cdev->desc.bMaxPacketSize0 = 9;
+ } else {
+ cdev->desc.bcdUSB = cpu_to_le16(0x0210);
+ }
+ }
+
value = min(w_length, (u16) sizeof cdev->desc);
memcpy(req->buf, &cdev->desc, value);
break;
case USB_DT_DEVICE_QUALIFIER:
- if (!gadget_is_dualspeed(gadget))
+ if (!gadget_is_dualspeed(gadget) ||
+ gadget->speed >= USB_SPEED_SUPER)
break;
device_qual(cdev);
value = min_t(int, w_length,
sizeof(struct usb_qualifier_descriptor));
break;
case USB_DT_OTHER_SPEED_CONFIG:
- if (!gadget_is_dualspeed(gadget))
+ if (!gadget_is_dualspeed(gadget) ||
+ gadget->speed >= USB_SPEED_SUPER)
break;
/* FALLTHROUGH */
case USB_DT_CONFIG:
@@ -707,8 +1272,11 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (value >= 0)
value = min(w_length, (u16) value);
break;
- default:
- goto unknown;
+ case USB_DT_BOS:
+ if (gadget_is_superspeed(gadget)) {
+ value = bos_desc(cdev);
+ value = min(w_length, (u16) value);
+ }
break;
}
break;
@@ -743,7 +1311,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
case USB_REQ_SET_INTERFACE:
if (ctrl->bRequestType != USB_RECIP_INTERFACE)
goto unknown;
- if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
break;
f = cdev->config->interface[intf];
if (!f)
@@ -751,11 +1319,19 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
if (w_value && !f->set_alt)
break;
value = f->set_alt(f, w_index, w_value);
+ if (value == USB_GADGET_DELAYED_STATUS) {
+ DBG(cdev,
+ "%s: interface %d (%s) requested delayed status\n",
+ __func__, intf, f->name);
+ cdev->delayed_status++;
+ DBG(cdev, "delayed_status count %d\n",
+ cdev->delayed_status);
+ }
break;
case USB_REQ_GET_INTERFACE:
if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
goto unknown;
- if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES)
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
break;
f = cdev->config->interface[intf];
if (!f)
@@ -767,35 +1343,123 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
*((u8 *)req->buf) = value;
value = min(w_length, (u16) 1);
break;
+
+ /*
+ * USB 3.0 additions:
+ * Function driver should handle get_status request. If such cb
+ * wasn't supplied we respond with default value = 0
+ * Note: function driver should supply such cb only for the first
+ * interface of the function
+ */
+ case USB_REQ_GET_STATUS:
+ if (!gadget_is_superspeed(gadget))
+ goto unknown;
+ if (ctrl->bRequestType != (USB_DIR_IN | USB_RECIP_INTERFACE))
+ goto unknown;
+ value = 2; /* This is the length of the get_status reply */
+ put_unaligned_le16(0, req->buf);
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
+ if (!f)
+ break;
+ status = f->get_status ? f->get_status(f) : 0;
+ if (status < 0)
+ break;
+ put_unaligned_le16(status & 0x0000ffff, req->buf);
+ break;
+ /*
+ * Function drivers should handle SetFeature/ClearFeature
+ * (FUNCTION_SUSPEND) request. function_suspend cb should be supplied
+ * only for the first interface of the function
+ */
+ case USB_REQ_CLEAR_FEATURE:
+ case USB_REQ_SET_FEATURE:
+ if (!gadget_is_superspeed(gadget))
+ goto unknown;
+ if (ctrl->bRequestType != (USB_DIR_OUT | USB_RECIP_INTERFACE))
+ goto unknown;
+ switch (w_value) {
+ case USB_INTRF_FUNC_SUSPEND:
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
+ if (!f)
+ break;
+ value = 0;
+ if (f->func_suspend)
+ value = f->func_suspend(f, w_index >> 8);
+ if (value < 0) {
+ ERROR(cdev,
+ "func_suspend() returned error %d\n",
+ value);
+ value = 0;
+ }
+ break;
+ }
+ break;
default:
unknown:
- debug("non-core control req%02x.%02x v%04x i%04x l%d\n",
+ VDBG(cdev,
+ "non-core control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
- /* functions always handle their interfaces ... punt other
- * recipients (endpoint, other, WUSB, ...) to the current
+ /* functions always handle their interfaces and endpoints...
+ * punt other recipients (other, WUSB, ...) to the current
* configuration code.
+ *
+ * REVISIT it could make sense to let the composite device
+ * take such requests too, if that's ever needed: to work
+ * in config 0, etc.
*/
- f = cdev->config->interface[intf];
+ switch (ctrl->bRequestType & USB_RECIP_MASK) {
+ case USB_RECIP_INTERFACE:
+ if (!cdev->config || intf >= MAX_CONFIG_INTERFACES)
+ break;
+ f = cdev->config->interface[intf];
+ break;
+
+ case USB_RECIP_ENDPOINT:
+ endp = ((w_index & 0x80) >> 3) | (w_index & 0x0f);
+ list_for_each_entry(f, &cdev->config->functions, list) {
+ if (test_bit(endp, f->endpoints))
+ break;
+ }
+ if (&f->list == &cdev->config->functions)
+ f = NULL;
+ break;
+ }
+
if (f && f->setup)
value = f->setup(f, ctrl);
- else
- f = NULL;
-
- if (value < 0 && !f) {
+ else {
struct usb_configuration *c;
c = cdev->config;
- if (c && c->setup)
+ if (!c)
+ goto done;
+
+ /* try current config's setup */
+ if (c->setup) {
value = c->setup(c, ctrl);
+ goto done;
+ }
+
+ /* try the only function in the current config */
+ if (!list_is_singular(&c->functions))
+ goto done;
+ f = list_first_entry(&c->functions, struct usb_function,
+ list);
+ if (f->setup)
+ value = f->setup(f, ctrl);
}
goto done;
}
/* respond with data transfer before status phase? */
- if (value >= 0) {
+ if (value >= 0 && value != USB_GADGET_DELAYED_STATUS) {
req->length = value;
req->zero = value < w_length;
value = usb_ep_queue(gadget->ep0, req);
@@ -804,6 +1468,10 @@ unknown:
req->status = 0;
composite_setup_complete(gadget->ep0, req);
}
+ } else if (value == USB_GADGET_DELAYED_STATUS && w_length != 0) {
+ WARN(cdev,
+ "%s: Delayed status not supported for w_length != 0",
+ __func__);
}
done:
@@ -811,7 +1479,7 @@ done:
return value;
}
-static void composite_disconnect(struct usb_gadget *gadget)
+void composite_disconnect(struct usb_gadget *gadget)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
@@ -820,12 +1488,13 @@ static void composite_disconnect(struct usb_gadget *gadget)
*/
if (cdev->config)
reset_config(cdev);
+ if (cdev->driver->disconnect)
+ cdev->driver->disconnect(cdev);
}
/*-------------------------------------------------------------------------*/
-static void /* __init_or_exit */
-composite_unbind(struct usb_gadget *gadget)
+static void __composite_unbind(struct usb_gadget *gadget, bool unbind_driver)
{
struct usb_composite_dev *cdev = get_gadget_data(gadget);
@@ -834,97 +1503,142 @@ composite_unbind(struct usb_gadget *gadget)
* so there's no i/o concurrency that could affect the
* state protected by cdev->lock.
*/
-// WARN_ON(cdev->config);
+ WARN_ON(cdev->config);
while (!list_empty(&cdev->configs)) {
struct usb_configuration *c;
-
c = list_first_entry(&cdev->configs,
struct usb_configuration, list);
- while (!list_empty(&c->functions)) {
- struct usb_function *f;
-
- f = list_first_entry(&c->functions,
- struct usb_function, list);
- list_del(&f->list);
- if (f->unbind) {
- DBG(cdev, "unbind function '%s'/%p\n",
- f->name, f);
- f->unbind(c, f);
- /* may free memory for "f" */
- }
- }
- list_del(&c->list);
- if (c->unbind) {
- DBG(cdev, "unbind config '%s'/%p\n", c->label, c);
- c->unbind(c);
- /* may free memory for "c" */
- }
+ remove_config(cdev, c);
}
- if (composite->unbind)
- composite->unbind(cdev);
+ if (cdev->driver->unbind && unbind_driver)
+ cdev->driver->unbind(cdev);
- if (cdev->req) {
- dma_free(cdev->req->buf);
- usb_ep_free_request(gadget->ep0, cdev->req);
- }
+ composite_dev_cleanup(cdev);
+
+ kfree(cdev->def_manufacturer);
kfree(cdev);
set_gadget_data(gadget, NULL);
- composite = NULL;
}
-static void __init
-string_override_one(struct usb_gadget_strings *tab, u8 id, const char *s)
+static void composite_unbind(struct usb_gadget *gadget)
{
- struct usb_string *str = tab->strings;
-
- for (str = tab->strings; str->s; str++) {
- if (str->id == id) {
- str->s = s;
- return;
- }
- }
+ __composite_unbind(gadget, true);
}
-static void __init
-string_override(struct usb_gadget_strings **tab, u8 id, const char *s)
+static void update_unchanged_dev_desc(struct usb_device_descriptor *new,
+ const struct usb_device_descriptor *old)
{
- while (*tab) {
- string_override_one(*tab, id, s);
- tab++;
- }
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ u8 iSerialNumber;
+ u8 iManufacturer;
+ u8 iProduct;
+
+ /*
+ * these variables may have been set in
+ * usb_composite_overwrite_options()
+ */
+ idVendor = new->idVendor;
+ idProduct = new->idProduct;
+ bcdDevice = new->bcdDevice;
+ iSerialNumber = new->iSerialNumber;
+ iManufacturer = new->iManufacturer;
+ iProduct = new->iProduct;
+
+ *new = *old;
+ if (idVendor)
+ new->idVendor = idVendor;
+ if (idProduct)
+ new->idProduct = idProduct;
+ if (bcdDevice)
+ new->bcdDevice = bcdDevice;
+ else
+ new->bcdDevice = cpu_to_le16(get_default_bcdDevice());
+ if (iSerialNumber)
+ new->iSerialNumber = iSerialNumber;
+ if (iManufacturer)
+ new->iManufacturer = iManufacturer;
+ if (iProduct)
+ new->iProduct = iProduct;
}
-static int __init composite_bind(struct usb_gadget *gadget)
+int composite_dev_prepare(struct usb_composite_driver *composite,
+ struct usb_composite_dev *cdev)
{
- struct usb_composite_dev *cdev;
- int status = -ENOMEM;
-
- cdev = xzalloc(sizeof *cdev);
- cdev->gadget = gadget;
- set_gadget_data(gadget, cdev);
- INIT_LIST_HEAD(&cdev->configs);
+ struct usb_gadget *gadget = cdev->gadget;
+ int ret = -ENOMEM;
/* preallocate control response and buffer */
cdev->req = usb_ep_alloc_request(gadget->ep0);
if (!cdev->req)
- goto fail;
- cdev->req->buf = dma_alloc(USB_BUFSIZ);
+ return -ENOMEM;
+
+ cdev->req->buf = dma_alloc(USB_COMP_EP0_BUFSIZ);
if (!cdev->req->buf)
goto fail;
+
cdev->req->complete = composite_setup_complete;
gadget->ep0->driver_data = cdev;
- cdev->bufsiz = USB_BUFSIZ;
cdev->driver = composite;
- usb_gadget_set_selfpowered(gadget);
+ /*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ */
+ if (usb_gadget_vbus_draw_ma <= USB_SELF_POWER_VBUS_MAX_DRAW)
+ usb_gadget_set_selfpowered(gadget);
/* interface and string IDs start at zero via kzalloc.
* we force endpoints to start unassigned; few controller
* drivers will zero ep->driver_data.
*/
- usb_ep_autoconfig_reset(cdev->gadget);
+ usb_ep_autoconfig_reset(gadget);
+ return 0;
+
+fail:
+ usb_ep_free_request(gadget->ep0, cdev->req);
+ cdev->req = NULL;
+ return ret;
+}
+
+void composite_dev_cleanup(struct usb_composite_dev *cdev)
+{
+ struct usb_gadget_string_container *uc, *tmp;
+
+ list_for_each_entry_safe(uc, tmp, &cdev->gstrings, list) {
+ list_del(&uc->list);
+ kfree(uc);
+ }
+ if (cdev->req) {
+ kfree(cdev->req->buf);
+ usb_ep_free_request(cdev->gadget->ep0, cdev->req);
+ }
+ cdev->next_string_id = 0;
+}
+
+static int composite_bind(struct usb_gadget *gadget,
+ struct usb_gadget_driver *gdriver)
+{
+ struct usb_composite_dev *cdev;
+ struct usb_composite_driver *composite = to_cdriver(gdriver);
+ int status = -ENOMEM;
+
+ cdev = kzalloc(sizeof *cdev, GFP_KERNEL);
+ if (!cdev)
+ return status;
+
+ cdev->gadget = gadget;
+ set_gadget_data(gadget, cdev);
+ INIT_LIST_HEAD(&cdev->configs);
+ INIT_LIST_HEAD(&cdev->gstrings);
+
+ status = composite_dev_prepare(composite, cdev);
+ if (status)
+ goto fail;
/* composite gadget needs to assign strings for whole device (like
* serial number), register function drivers, potentially update
@@ -934,42 +1648,23 @@ static int __init composite_bind(struct usb_gadget *gadget)
if (status < 0)
goto fail;
- cdev->desc = *composite->dev;
- cdev->desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
+ update_unchanged_dev_desc(&cdev->desc, composite->dev);
- /* standardized runtime overrides for device ID data */
- if (idVendor)
- cdev->desc.idVendor = cpu_to_le16(idVendor);
- if (idProduct)
- cdev->desc.idProduct = cpu_to_le16(idProduct);
- if (bcdDevice)
- cdev->desc.bcdDevice = cpu_to_le16(bcdDevice);
-
- /* strings can't be assigned before bind() allocates the
- * releavnt identifiers
- */
- if (cdev->desc.iManufacturer && iManufacturer)
- string_override(composite->strings,
- cdev->desc.iManufacturer, iManufacturer);
- if (cdev->desc.iProduct && iProduct)
- string_override(composite->strings,
- cdev->desc.iProduct, iProduct);
- if (cdev->desc.iSerialNumber && iSerialNumber)
- string_override(composite->strings,
- cdev->desc.iSerialNumber, iSerialNumber);
+ /* has userspace failed to provide a serial number? */
+ if (composite->needs_serial && !cdev->desc.iSerialNumber)
+ WARNING(cdev, "userspace failed to provide iSerialNumber\n");
+ INFO(cdev, "%s ready\n", composite->name);
return 0;
fail:
- composite_unbind(gadget);
+ __composite_unbind(gadget, false);
return status;
}
/*-------------------------------------------------------------------------*/
-static struct usb_gadget_driver composite_driver = {
- .speed = USB_SPEED_HIGH,
-
+static const struct usb_gadget_driver composite_driver_template = {
.bind = composite_bind,
.unbind = composite_unbind,
@@ -978,8 +1673,9 @@ static struct usb_gadget_driver composite_driver = {
};
/**
- * usb_composite_register() - register a composite driver
+ * usb_composite_probe() - register a composite driver
* @driver: the driver to register
+ *
* Context: single threaded during gadget setup
*
* This function is used to register drivers using the composite driver
@@ -992,25 +1688,26 @@ static struct usb_gadget_driver composite_driver = {
* while it was binding. That would usually be done in order to wait for
* some userspace participation.
*/
-int usb_composite_register(struct usb_composite_driver *driver)
+int usb_composite_probe(struct usb_composite_driver *driver)
{
- int ret;
+ struct usb_gadget_driver *gadget_driver;
- if (!driver || !driver->dev || !driver->bind || composite)
+ if (!driver || !driver->dev || !driver->bind)
return -EINVAL;
if (!driver->name)
driver->name = "composite";
- composite_driver.function = (char *) driver->name;
- composite = driver;
- ret = usb_gadget_register_driver(&composite_driver);
+ driver->gadget_driver = composite_driver_template;
+ gadget_driver = &driver->gadget_driver;
- if (ret)
- composite = NULL;
+ gadget_driver->function = (char *) driver->name;
+ gadget_driver->driver.name = driver->name;
+ gadget_driver->max_speed = driver->max_speed;
- return ret;
+ return usb_gadget_probe_driver(gadget_driver);
}
+EXPORT_SYMBOL_GPL(usb_composite_probe);
/**
* usb_composite_unregister() - unregister a composite driver
@@ -1021,7 +1718,84 @@ int usb_composite_register(struct usb_composite_driver *driver)
*/
void usb_composite_unregister(struct usb_composite_driver *driver)
{
- if (composite != driver)
- return;
- usb_gadget_unregister_driver(&composite_driver);
+ usb_gadget_unregister_driver(&driver->gadget_driver);
+}
+EXPORT_SYMBOL_GPL(usb_composite_unregister);
+
+/**
+ * usb_composite_setup_continue() - Continue with the control transfer
+ * @cdev: the composite device who's control transfer was kept waiting
+ *
+ * This function must be called by the USB function driver to continue
+ * with the control transfer's data/status stage in case it had requested to
+ * delay the data/status stages. A USB function's setup handler (e.g. set_alt())
+ * can request the composite framework to delay the setup request's data/status
+ * stages by returning USB_GADGET_DELAYED_STATUS.
+ */
+void usb_composite_setup_continue(struct usb_composite_dev *cdev)
+{
+ int value;
+ struct usb_request *req = cdev->req;
+
+ DBG(cdev, "%s\n", __func__);
+
+ if (cdev->delayed_status == 0) {
+ WARN(cdev, "%s: Unexpected call\n", __func__);
+
+ } else if (--cdev->delayed_status == 0) {
+ DBG(cdev, "%s: Completing delayed status\n", __func__);
+ req->length = 0;
+ value = usb_ep_queue(cdev->gadget->ep0, req);
+ if (value < 0) {
+ DBG(cdev, "ep_queue --> %d\n", value);
+ req->status = 0;
+ composite_setup_complete(cdev->gadget->ep0, req);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(usb_composite_setup_continue);
+
+static char *composite_default_mfr(struct usb_gadget *gadget)
+{
+ return asprintf("barebox %s", gadget->name);
+}
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+ struct usb_composite_overwrite *covr)
+{
+ struct usb_device_descriptor *desc = &cdev->desc;
+ struct usb_gadget_strings *gstr = cdev->driver->strings[0];
+ struct usb_string *dev_str = gstr->strings;
+
+ if (covr->idVendor)
+ desc->idVendor = cpu_to_le16(covr->idVendor);
+
+ if (covr->idProduct)
+ desc->idProduct = cpu_to_le16(covr->idProduct);
+
+ if (covr->bcdDevice)
+ desc->bcdDevice = cpu_to_le16(covr->bcdDevice);
+
+ if (covr->serial_number) {
+ desc->iSerialNumber = dev_str[USB_GADGET_SERIAL_IDX].id;
+ dev_str[USB_GADGET_SERIAL_IDX].s = covr->serial_number;
+ }
+ if (covr->manufacturer) {
+ desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+ dev_str[USB_GADGET_MANUFACTURER_IDX].s = covr->manufacturer;
+
+ } else if (!strlen(dev_str[USB_GADGET_MANUFACTURER_IDX].s)) {
+ desc->iManufacturer = dev_str[USB_GADGET_MANUFACTURER_IDX].id;
+ cdev->def_manufacturer = composite_default_mfr(cdev->gadget);
+ dev_str[USB_GADGET_MANUFACTURER_IDX].s = cdev->def_manufacturer;
+ }
+
+ if (covr->product) {
+ desc->iProduct = dev_str[USB_GADGET_PRODUCT_IDX].id;
+ dev_str[USB_GADGET_PRODUCT_IDX].s = covr->product;
+ }
}
+EXPORT_SYMBOL_GPL(usb_composite_overwrite_options);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c
index 5b338c5..b463f79 100644
--- a/drivers/usb/gadget/config.c
+++ b/drivers/usb/gadget/config.c
@@ -1,7 +1,19 @@
+/*
+ * usb/gadget/config.c -- simplify building config descriptors
+ *
+ * Copyright (C) 2003 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
#include <common.h>
-#include <malloc.h>
-#include <errno.h>
+
#include <usb/ch9.h>
+#include <usb/gadget.h>
+#include <usb/composite.h>
/**
* usb_descriptor_fillbuf - fill buffer with descriptors
@@ -36,6 +48,60 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen,
}
return dest - (u8 *)buf;
}
+EXPORT_SYMBOL_GPL(usb_descriptor_fillbuf);
+
+/**
+ * usb_gadget_config_buf - builts a complete configuration descriptor
+ * @config: Header for the descriptor, including characteristics such
+ * as power requirements and number of interfaces.
+ * @desc: Null-terminated vector of pointers to the descriptors (interface,
+ * endpoint, etc) defining all functions in this device configuration.
+ * @buf: Buffer for the resulting configuration descriptor.
+ * @length: Length of buffer. If this is not big enough to hold the
+ * entire configuration descriptor, an error code will be returned.
+ *
+ * This copies descriptors into the response buffer, building a descriptor
+ * for that configuration. It returns the buffer length or a negative
+ * status code. The config.wTotalLength field is set to match the length
+ * of the result, but other descriptor fields (including power usage and
+ * interface count) must be set by the caller.
+ *
+ * Gadget drivers could use this when constructing a config descriptor
+ * in response to USB_REQ_GET_DESCRIPTOR. They will need to patch the
+ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
+ */
+int usb_gadget_config_buf(
+ const struct usb_config_descriptor *config,
+ void *buf,
+ unsigned length,
+ const struct usb_descriptor_header **desc
+)
+{
+ struct usb_config_descriptor *cp = buf;
+ int len;
+
+ /* config descriptor first */
+ if (length < USB_DT_CONFIG_SIZE || !desc)
+ return -EINVAL;
+ *cp = *config;
+
+ /* then interface/endpoint/class/vendor/... */
+ len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
+ length - USB_DT_CONFIG_SIZE, desc);
+ if (len < 0)
+ return len;
+ len += USB_DT_CONFIG_SIZE;
+ if (len > 0xffff)
+ return -EINVAL;
+
+ /* patch up the config descriptor */
+ cp->bLength = USB_DT_CONFIG_SIZE;
+ cp->bDescriptorType = USB_DT_CONFIG;
+ cp->wTotalLength = cpu_to_le16(len);
+ cp->bmAttributes |= USB_CONFIG_ATT_ONE;
+ return len;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_config_buf);
/**
* usb_copy_descriptors - copy a vector of USB descriptors
@@ -49,7 +115,7 @@ usb_descriptor_fillbuf(void *buf, unsigned buflen,
* with identifiers (for interfaces, strings, endpoints, and more)
* as needed by a given function instance.
*/
-struct usb_descriptor_header **__init
+struct usb_descriptor_header **
usb_copy_descriptors(struct usb_descriptor_header **src)
{
struct usb_descriptor_header **tmp;
@@ -85,29 +151,41 @@ usb_copy_descriptors(struct usb_descriptor_header **src)
return ret;
}
+EXPORT_SYMBOL_GPL(usb_copy_descriptors);
-/**
- * usb_find_endpoint - find a copy of an endpoint descriptor
- * @src: original vector of descriptors
- * @copy: copy of @src
- * @match: endpoint descriptor found in @src
- *
- * This returns the copy of the @match descriptor made for @copy. Its
- * intended use is to help remembering the endpoint descriptor to use
- * when enabling a given endpoint.
- */
-struct usb_endpoint_descriptor *__init
-usb_find_endpoint(
- struct usb_descriptor_header **src,
- struct usb_descriptor_header **copy,
- struct usb_endpoint_descriptor *match
-)
+int usb_assign_descriptors(struct usb_function *f,
+ struct usb_descriptor_header **fs,
+ struct usb_descriptor_header **hs,
+ struct usb_descriptor_header **ss)
{
- while (*src) {
- if (*src == (void *) match)
- return (void *)*copy;
- src++;
- copy++;
+ struct usb_gadget *g = f->config->cdev->gadget;
+
+ if (fs) {
+ f->fs_descriptors = usb_copy_descriptors(fs);
+ if (!f->fs_descriptors)
+ goto err;
+ }
+ if (hs && gadget_is_dualspeed(g)) {
+ f->hs_descriptors = usb_copy_descriptors(hs);
+ if (!f->hs_descriptors)
+ goto err;
+ }
+ if (ss && gadget_is_superspeed(g)) {
+ f->ss_descriptors = usb_copy_descriptors(ss);
+ if (!f->ss_descriptors)
+ goto err;
}
- return NULL;
+ return 0;
+err:
+ usb_free_all_descriptors(f);
+ return -ENOMEM;
+}
+EXPORT_SYMBOL_GPL(usb_assign_descriptors);
+
+void usb_free_all_descriptors(struct usb_function *f)
+{
+ usb_free_descriptors(f->fs_descriptors);
+ usb_free_descriptors(f->hs_descriptors);
+ usb_free_descriptors(f->ss_descriptors);
}
+EXPORT_SYMBOL_GPL(usb_free_all_descriptors);
diff --git a/drivers/usb/gadget/dfu.c b/drivers/usb/gadget/dfu.c
index d0f2155..a2b4c0d 100644
--- a/drivers/usb/gadget/dfu.c
+++ b/drivers/usb/gadget/dfu.c
@@ -116,6 +116,7 @@ static struct usb_interface_descriptor dfu_control_interface_desc = {
static int
dfu_bind(struct usb_configuration *c, struct usb_function *f)
{
+ struct usb_composite_dev *cdev = c->cdev;
struct usb_descriptor_header **header;
struct usb_interface_descriptor *desc;
int i;
@@ -145,8 +146,8 @@ dfu_bind(struct usb_configuration *c, struct usb_function *f)
header[i + 1] = NULL;
/* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(header);
- if (!f->descriptors)
+ f->fs_descriptors = usb_copy_descriptors(header);
+ if (!f->fs_descriptors)
goto out;
/* support all relevant hardware speeds... we expect that when
@@ -176,7 +177,7 @@ dfu_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_dfu *dfu = func_to_dfu(f);
- free(f->descriptors);
+ free(f->fs_descriptors);
if (gadget_is_dualspeed(c->cdev->gadget))
free(f->hs_descriptors);
@@ -634,7 +635,6 @@ static void dfu_unbind_config(struct usb_configuration *c)
static struct usb_configuration dfu_config_driver = {
.label = "USB DFU",
- .bind = dfu_bind_config,
.unbind = dfu_unbind_config,
.bConfigurationValue = 1,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
@@ -676,7 +676,7 @@ static int dfu_driver_bind(struct usb_composite_dev *cdev)
strings_dev[STRING_DESCRIPTION_IDX].id = status;
dfu_config_driver.iConfiguration = status;
- status = usb_add_config(cdev, &dfu_config_driver);
+ status = usb_add_config(cdev, &dfu_config_driver, dfu_bind_config);
if (status < 0)
goto fail;
@@ -703,7 +703,7 @@ int usb_dfu_register(struct usb_dfu_pdata *pdata)
strings_dev[STRING_MANUFACTURER_IDX].s = pdata->manufacturer;
strings_dev[STRING_PRODUCT_IDX].s = pdata->productname;
- ret = usb_composite_register(&dfu_driver);
+ ret = usb_composite_probe(&dfu_driver);
if (ret)
return ret;
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 13ad479..f0f576d 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -7,17 +7,11 @@
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- *
*/
#include <init.h>
#include <common.h>
+
#include <linux/ctype.h>
#include <asm/byteorder.h>
@@ -26,15 +20,6 @@
#include "gadget_chips.h"
-/* we must assign addresses for configurable endpoints (like net2280) */
-static __initdata unsigned epnum;
-
-// #define MANY_ENDPOINTS
-#ifdef MANY_ENDPOINTS
-/* more than 15 configurable endpoints */
-static __initdata unsigned in_epnum;
-#endif
-
/*
* This should work with endpoints from controller drivers sharing the
* same endpoint naming convention. By example:
@@ -51,23 +36,26 @@ static __initdata unsigned in_epnum;
* NOTE: each endpoint is unidirectional, as specified by its USB
* descriptor; and isn't specific to a configuration or altsetting.
*/
-static int __init
+static int
ep_matches (
struct usb_gadget *gadget,
struct usb_ep *ep,
- struct usb_endpoint_descriptor *desc
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp
)
{
u8 type;
const char *tmp;
u16 max;
+ int num_req_streams = 0;
+
/* endpoint already claimed? */
if (NULL != ep->driver_data)
return 0;
/* only support ep0 for portable CONTROL traffic */
- type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ type = usb_endpoint_type(desc);
if (USB_ENDPOINT_XFER_CONTROL == type)
return 0;
@@ -120,28 +108,48 @@ ep_matches (
}
}
+ /*
+ * Get the number of required streams from the EP companion
+ * descriptor and see if the EP matches it
+ */
+ if (usb_endpoint_xfer_bulk(desc)) {
+ if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) {
+ num_req_streams = ep_comp->bmAttributes & 0x1f;
+ if (num_req_streams > ep->max_streams)
+ return 0;
+ }
+
+ }
+
+ /*
+ * If the protocol driver hasn't yet decided on wMaxPacketSize
+ * and wants to know the maximum possible, provide the info.
+ */
+ if (desc->wMaxPacketSize == 0)
+ desc->wMaxPacketSize = cpu_to_le16(ep->maxpacket_limit);
+
/* endpoint maxpacket size is an input parameter, except for bulk
* where it's an output parameter representing the full speed limit.
* the usb spec fixes high speed bulk maxpacket at 512 bytes.
*/
- max = 0x7ff & le16_to_cpu(desc->wMaxPacketSize);
+ max = 0x7ff & usb_endpoint_maxp(desc);
switch (type) {
case USB_ENDPOINT_XFER_INT:
- /* INT: limit 64 bytes full speed, 1024 high speed */
- if (!gadget->is_dualspeed && max > 64)
+ /* INT: limit 64 bytes full speed, 1024 high/super speed */
+ if (!gadget_is_dualspeed(gadget) && max > 64)
return 0;
/* FALLTHROUGH */
case USB_ENDPOINT_XFER_ISOC:
- /* ISO: limit 1023 bytes full speed, 1024 high speed */
- if (ep->maxpacket < max)
+ /* ISO: limit 1023 bytes full speed, 1024 high/super speed */
+ if (ep->maxpacket_limit < max)
return 0;
- if (!gadget->is_dualspeed && max > 1023)
+ if (!gadget_is_dualspeed(gadget) && max > 1023)
return 0;
/* BOTH: "high bandwidth" works only at high speed */
if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) {
- if (!gadget->is_dualspeed)
+ if (!gadget_is_dualspeed(gadget))
return 0;
/* configure your hardware with enough buffering!! */
}
@@ -155,31 +163,30 @@ ep_matches (
if (isdigit (ep->name [2])) {
u8 num = simple_strtoul (&ep->name [2], NULL, 10);
desc->bEndpointAddress |= num;
-#ifdef MANY_ENDPOINTS
} else if (desc->bEndpointAddress & USB_DIR_IN) {
- if (++in_epnum > 15)
+ if (++gadget->in_epnum > 15)
return 0;
- desc->bEndpointAddress = USB_DIR_IN | in_epnum;
-#endif
+ desc->bEndpointAddress = USB_DIR_IN | gadget->in_epnum;
} else {
- if (++epnum > 15)
+ if (++gadget->out_epnum > 15)
return 0;
- desc->bEndpointAddress |= epnum;
+ desc->bEndpointAddress |= gadget->out_epnum;
}
/* report (variable) full speed bulk maxpacket */
- if (USB_ENDPOINT_XFER_BULK == type) {
- int size = ep->maxpacket;
+ if ((USB_ENDPOINT_XFER_BULK == type) && !ep_comp) {
+ int size = ep->maxpacket_limit;
/* min() doesn't work on bitfields with gcc-3.5 */
if (size > 64)
size = 64;
desc->wMaxPacketSize = cpu_to_le16(size);
}
+ ep->address = desc->bEndpointAddress;
return 1;
}
-static struct usb_ep * __init
+static struct usb_ep *
find_ep (struct usb_gadget *gadget, const char *name)
{
struct usb_ep *ep;
@@ -192,38 +199,53 @@ find_ep (struct usb_gadget *gadget, const char *name)
}
/**
- * usb_ep_autoconfig - choose an endpoint matching the descriptor
+ * usb_ep_autoconfig_ss() - choose an endpoint matching the ep
+ * descriptor and ep companion descriptor
* @gadget: The device to which the endpoint must belong.
* @desc: Endpoint descriptor, with endpoint direction and transfer mode
- * initialized. For periodic transfers, the maximum packet
- * size must also be initialized. This is modified on success.
+ * initialized. For periodic transfers, the maximum packet
+ * size must also be initialized. This is modified on
+ * success.
+ * @ep_comp: Endpoint companion descriptor, with the required
+ * number of streams. Will be modified when the chosen EP
+ * supports a different number of streams.
*
- * By choosing an endpoint to use with the specified descriptor, this
- * routine simplifies writing gadget drivers that work with multiple
- * USB device controllers. The endpoint would be passed later to
- * usb_ep_enable(), along with some descriptor.
+ * This routine replaces the usb_ep_autoconfig when needed
+ * superspeed enhancments. If such enhancemnets are required,
+ * the FD should call usb_ep_autoconfig_ss directly and provide
+ * the additional ep_comp parameter.
+ *
+ * By choosing an endpoint to use with the specified descriptor,
+ * this routine simplifies writing gadget drivers that work with
+ * multiple USB device controllers. The endpoint would be
+ * passed later to usb_ep_enable(), along with some descriptor.
*
* That second descriptor won't always be the same as the first one.
* For example, isochronous endpoints can be autoconfigured for high
* bandwidth, and then used in several lower bandwidth altsettings.
* Also, high and full speed descriptors will be different.
*
- * Be sure to examine and test the results of autoconfiguration on your
- * hardware. This code may not make the best choices about how to use the
- * USB controller, and it can't know all the restrictions that may apply.
- * Some combinations of driver and hardware won't be able to autoconfigure.
+ * Be sure to examine and test the results of autoconfiguration
+ * on your hardware. This code may not make the best choices
+ * about how to use the USB controller, and it can't know all
+ * the restrictions that may apply. Some combinations of driver
+ * and hardware won't be able to autoconfigure.
*
* On success, this returns an un-claimed usb_ep, and modifies the endpoint
* descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value
- * is initialized as if the endpoint were used at full speed. To prevent
- * the endpoint from being returned by a later autoconfig call, claim it
- * by assigning ep->driver_data to some non-null value.
+ * is initialized as if the endpoint were used at full speed and
+ * the bmAttribute field in the ep companion descriptor is
+ * updated with the assigned number of streams if it is
+ * different from the original value. To prevent the endpoint
+ * from being returned by a later autoconfig call, claim it by
+ * assigning ep->driver_data to some non-null value.
*
* On failure, this returns a null endpoint descriptor.
*/
-struct usb_ep * __init usb_ep_autoconfig (
+struct usb_ep *usb_ep_autoconfig_ss(
struct usb_gadget *gadget,
- struct usb_endpoint_descriptor *desc
+ struct usb_endpoint_descriptor *desc,
+ struct usb_ss_ep_comp_descriptor *ep_comp
)
{
struct usb_ep *ep;
@@ -237,47 +259,101 @@ struct usb_ep * __init usb_ep_autoconfig (
if (gadget_is_net2280 (gadget) && type == USB_ENDPOINT_XFER_INT) {
/* ep-e, ep-f are PIO with only 64 byte fifos */
ep = find_ep (gadget, "ep-e");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
+ if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ goto found_ep;
ep = find_ep (gadget, "ep-f");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
+ if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ goto found_ep;
} else if (gadget_is_goku (gadget)) {
if (USB_ENDPOINT_XFER_INT == type) {
/* single buffering is enough */
- ep = find_ep (gadget, "ep3-bulk");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
+ ep = find_ep(gadget, "ep3-bulk");
+ if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ goto found_ep;
} else if (USB_ENDPOINT_XFER_BULK == type
&& (USB_DIR_IN & desc->bEndpointAddress)) {
/* DMA may be available */
- ep = find_ep (gadget, "ep2-bulk");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
+ ep = find_ep(gadget, "ep2-bulk");
+ if (ep && ep_matches(gadget, ep, desc,
+ ep_comp))
+ goto found_ep;
}
- } else if (gadget_is_sh (gadget) && USB_ENDPOINT_XFER_INT == type) {
- /* single buffering is enough; maybe 8 byte fifo is too */
- ep = find_ep (gadget, "ep3in-bulk");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
-
- } else if (gadget_is_mq11xx (gadget) && USB_ENDPOINT_XFER_INT == type) {
- ep = find_ep (gadget, "ep1-bulk");
- if (ep && ep_matches (gadget, ep, desc))
- return ep;
+#ifdef CONFIG_BLACKFIN
+ } else if (gadget_is_musbhdrc(gadget)) {
+ if ((USB_ENDPOINT_XFER_BULK == type) ||
+ (USB_ENDPOINT_XFER_ISOC == type)) {
+ if (USB_DIR_IN & desc->bEndpointAddress)
+ ep = find_ep (gadget, "ep5in");
+ else
+ ep = find_ep (gadget, "ep6out");
+ } else if (USB_ENDPOINT_XFER_INT == type) {
+ if (USB_DIR_IN & desc->bEndpointAddress)
+ ep = find_ep(gadget, "ep1in");
+ else
+ ep = find_ep(gadget, "ep2out");
+ } else
+ ep = NULL;
+ if (ep && ep_matches(gadget, ep, desc, ep_comp))
+ goto found_ep;
+#endif
}
/* Second, look at endpoints until an unclaimed one looks usable */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (ep_matches (gadget, ep, desc))
- return ep;
+ if (ep_matches(gadget, ep, desc, ep_comp))
+ goto found_ep;
}
/* Fail */
return NULL;
+found_ep:
+ ep->desc = NULL;
+ ep->comp_desc = NULL;
+ return ep;
}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_ss);
+
+/**
+ * usb_ep_autoconfig() - choose an endpoint matching the
+ * descriptor
+ * @gadget: The device to which the endpoint must belong.
+ * @desc: Endpoint descriptor, with endpoint direction and transfer mode
+ * initialized. For periodic transfers, the maximum packet
+ * size must also be initialized. This is modified on success.
+ *
+ * By choosing an endpoint to use with the specified descriptor, this
+ * routine simplifies writing gadget drivers that work with multiple
+ * USB device controllers. The endpoint would be passed later to
+ * usb_ep_enable(), along with some descriptor.
+ *
+ * That second descriptor won't always be the same as the first one.
+ * For example, isochronous endpoints can be autoconfigured for high
+ * bandwidth, and then used in several lower bandwidth altsettings.
+ * Also, high and full speed descriptors will be different.
+ *
+ * Be sure to examine and test the results of autoconfiguration on your
+ * hardware. This code may not make the best choices about how to use the
+ * USB controller, and it can't know all the restrictions that may apply.
+ * Some combinations of driver and hardware won't be able to autoconfigure.
+ *
+ * On success, this returns an un-claimed usb_ep, and modifies the endpoint
+ * descriptor bEndpointAddress. For bulk endpoints, the wMaxPacket value
+ * is initialized as if the endpoint were used at full speed. To prevent
+ * the endpoint from being returned by a later autoconfig call, claim it
+ * by assigning ep->driver_data to some non-null value.
+ *
+ * On failure, this returns a null endpoint descriptor.
+ */
+struct usb_ep *usb_ep_autoconfig(
+ struct usb_gadget *gadget,
+ struct usb_endpoint_descriptor *desc
+)
+{
+ return usb_ep_autoconfig_ss(gadget, desc, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig);
/**
* usb_ep_autoconfig_reset - reset endpoint autoconfig state
@@ -288,17 +364,14 @@ struct usb_ep * __init usb_ep_autoconfig (
* state such as ep->driver_data and the record of assigned endpoints
* used by usb_ep_autoconfig().
*/
-void __init usb_ep_autoconfig_reset (struct usb_gadget *gadget)
+void usb_ep_autoconfig_reset (struct usb_gadget *gadget)
{
struct usb_ep *ep;
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
ep->driver_data = NULL;
}
-#ifdef MANY_ENDPOINTS
- in_epnum = 0;
-#endif
- epnum = 0;
+ gadget->in_epnum = 0;
+ gadget->out_epnum = 0;
}
-
-
+EXPORT_SYMBOL_GPL(usb_ep_autoconfig_reset);
diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c
index 218aed2..f582fcd 100644
--- a/drivers/usb/gadget/f_acm.c
+++ b/drivers/usb/gadget/f_acm.c
@@ -4,6 +4,8 @@
* Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
* Copyright (C) 2008 by David Brownell
* Copyright (C) 2008 by Nokia Corporation
+ * Copyright (C) 2009 by Samsung Electronics
+ * Author: Michal Nazarewicz (mina86@mina86.com)
*
* This software is distributed under the terms of the GNU General
* Public License ("GPL") as published by the Free Software Foundation,
@@ -14,10 +16,12 @@
#include <common.h>
#include <usb/cdc.h>
+#include <linux/err.h>
#include <asm/byteorder.h>
+#include <usb/composite.h>
-#include "gadget_chips.h"
#include "u_serial.h"
+#include "gadget_chips.h"
/*
@@ -37,12 +41,6 @@
* descriptors (roughly equivalent to CDC Unions) may sometimes help.
*/
-struct acm_ep_descs {
- struct usb_endpoint_descriptor *in;
- struct usb_endpoint_descriptor *out;
- struct usb_endpoint_descriptor *notify;
-};
-
struct f_acm {
struct gserial port;
u8 ctrl_id, data_id;
@@ -50,11 +48,13 @@ struct f_acm {
u8 pending;
- struct acm_ep_descs fs;
- struct acm_ep_descs hs;
+ /* lock is mostly for pending and notify_req ... they get accessed
+ * by callbacks both from tty (open/close/break) under its spinlock,
+ * and notify_req.complete() which can't use that lock.
+ */
+ spinlock_t lock;
struct usb_ep *notify;
- struct usb_endpoint_descriptor *notify_desc;
struct usb_request *notify_req;
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
@@ -89,11 +89,25 @@ static inline struct f_acm *port_to_acm(struct gserial *p)
/* notification endpoint uses smallish and infrequent fixed-size messages */
-#define GS_LOG2_NOTIFY_INTERVAL 5 /* 1 << 5 == 32 msec */
+#define GS_NOTIFY_INTERVAL_MS 32
#define GS_NOTIFY_MAXPACKET 10 /* notification + 2 bytes */
/* interface and class descriptors: */
+static struct usb_interface_assoc_descriptor
+acm_iad_descriptor = {
+ .bLength = sizeof acm_iad_descriptor,
+ .bDescriptorType = USB_DT_INTERFACE_ASSOCIATION,
+
+ /* .bFirstInterface = DYNAMIC, */
+ .bInterfaceCount = 2, // control + data
+ .bFunctionClass = USB_CLASS_COMM,
+ .bFunctionSubClass = USB_CDC_SUBCLASS_ACM,
+ .bFunctionProtocol = USB_CDC_ACM_PROTO_AT_V25TER,
+ /* .iFunction = DYNAMIC */
+};
+
+
static struct usb_interface_descriptor acm_control_interface_desc = {
.bLength = USB_DT_INTERFACE_SIZE,
.bDescriptorType = USB_DT_INTERFACE,
@@ -155,7 +169,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc = {
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL,
+ .bInterval = GS_NOTIFY_INTERVAL_MS,
};
static struct usb_endpoint_descriptor acm_fs_in_desc = {
@@ -173,6 +187,7 @@ static struct usb_endpoint_descriptor acm_fs_out_desc = {
};
static struct usb_descriptor_header *acm_fs_function[] = {
+ (struct usb_descriptor_header *) &acm_iad_descriptor,
(struct usb_descriptor_header *) &acm_control_interface_desc,
(struct usb_descriptor_header *) &acm_header_desc,
(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
@@ -186,14 +201,13 @@ static struct usb_descriptor_header *acm_fs_function[] = {
};
/* high speed support: */
-
static struct usb_endpoint_descriptor acm_hs_notify_desc = {
.bLength = USB_DT_ENDPOINT_SIZE,
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_INT,
.wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET),
- .bInterval = GS_LOG2_NOTIFY_INTERVAL+4,
+ .bInterval = USB_MS_TO_HS_INTERVAL(GS_NOTIFY_INTERVAL_MS),
};
static struct usb_endpoint_descriptor acm_hs_in_desc = {
@@ -211,6 +225,7 @@ static struct usb_endpoint_descriptor acm_hs_out_desc = {
};
static struct usb_descriptor_header *acm_hs_function[] = {
+ (struct usb_descriptor_header *) &acm_iad_descriptor,
(struct usb_descriptor_header *) &acm_control_interface_desc,
(struct usb_descriptor_header *) &acm_header_desc,
(struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
@@ -223,16 +238,54 @@ static struct usb_descriptor_header *acm_hs_function[] = {
NULL,
};
+static struct usb_endpoint_descriptor acm_ss_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor acm_ss_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor acm_ss_bulk_comp_desc = {
+ .bLength = sizeof acm_ss_bulk_comp_desc,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *acm_ss_function[] = {
+ (struct usb_descriptor_header *) &acm_iad_descriptor,
+ (struct usb_descriptor_header *) &acm_control_interface_desc,
+ (struct usb_descriptor_header *) &acm_header_desc,
+ (struct usb_descriptor_header *) &acm_call_mgmt_descriptor,
+ (struct usb_descriptor_header *) &acm_descriptor,
+ (struct usb_descriptor_header *) &acm_union_desc,
+ (struct usb_descriptor_header *) &acm_hs_notify_desc,
+ (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+ (struct usb_descriptor_header *) &acm_data_interface_desc,
+ (struct usb_descriptor_header *) &acm_ss_in_desc,
+ (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+ (struct usb_descriptor_header *) &acm_ss_out_desc,
+ (struct usb_descriptor_header *) &acm_ss_bulk_comp_desc,
+ NULL,
+};
+
/* string descriptors: */
#define ACM_CTRL_IDX 0
#define ACM_DATA_IDX 1
+#define ACM_IAD_IDX 2
/* static strings, in UTF-8 */
static struct usb_string acm_string_defs[] = {
[ACM_CTRL_IDX].s = "CDC Abstract Control Model (ACM)",
[ACM_DATA_IDX].s = "CDC ACM Data",
- { /* ZEROES END LIST */ },
+ [ACM_IAD_IDX ].s = "CDC Serial",
+ { } /* end of list */
};
static struct usb_gadget_strings acm_string_table = {
@@ -257,6 +310,7 @@ static void acm_complete_set_line_coding(struct usb_ep *ep,
struct usb_request *req)
{
struct f_acm *acm = ep->driver_data;
+ struct usb_composite_dev *cdev = acm->port.func.config->cdev;
if (req->status != 0) {
DBG(cdev, "acm ttyGS%d completion, err %d\n",
@@ -309,6 +363,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
if (w_length != sizeof(struct usb_cdc_line_coding)
|| w_index != acm->ctrl_id)
goto invalid;
+
value = w_length;
cdev->gadget->ep0->driver_data = acm;
req->complete = acm_complete_set_line_coding;
@@ -319,6 +374,7 @@ static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
| USB_CDC_REQ_GET_LINE_CODING:
if (w_index != acm->ctrl_id)
goto invalid;
+
value = min_t(unsigned, w_length,
sizeof(struct usb_cdc_line_coding));
memcpy(req->buf, &acm->port_line_coding, value);
@@ -376,25 +432,28 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
usb_ep_disable(acm->notify);
} else {
VDBG(cdev, "init acm ctrl interface %d\n", intf);
- acm->notify_desc = ep_choose(cdev->gadget,
- acm->hs.notify,
- acm->fs.notify);
+ if (config_ep_by_speed(cdev->gadget, f, acm->notify))
+ return -EINVAL;
}
- usb_ep_enable(acm->notify, acm->notify_desc);
+ usb_ep_enable(acm->notify);
acm->notify->driver_data = acm;
} else if (intf == acm->data_id) {
if (acm->port.in->driver_data) {
DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
gserial_disconnect(&acm->port);
- } else {
+ }
+ if (!acm->port.in->desc || !acm->port.out->desc) {
DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
- acm->port.in_desc = ep_choose(cdev->gadget,
- acm->hs.in, acm->fs.in);
- acm->port.out_desc = ep_choose(cdev->gadget,
- acm->hs.out, acm->fs.out);
+ if (config_ep_by_speed(cdev->gadget, f,
+ acm->port.in) ||
+ config_ep_by_speed(cdev->gadget, f,
+ acm->port.out)) {
+ acm->port.in->desc = NULL;
+ acm->port.out->desc = NULL;
+ return -EINVAL;
+ }
}
-
gserial_connect(&acm->port, acm->port_num);
} else
@@ -406,8 +465,9 @@ static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
static void acm_disable(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
- VDBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
+ DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
gserial_disconnect(&acm->port);
usb_ep_disable(acm->notify);
acm->notify->driver_data = NULL;
@@ -424,7 +484,7 @@ static void acm_disable(struct usb_function *f)
* @length: size of data
* Context: irqs blocked, acm->lock held, acm_notify_req non-null
*
- * Returns zero on sucess or a negative errno.
+ * Returns zero on success or a negative errno.
*
* See section 6.3.5 of the CDC 1.1 specification for information
* about the only notification we issue: SerialState change.
@@ -441,7 +501,7 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
req = acm->notify_req;
acm->notify_req = NULL;
- acm->pending = 0;
+ acm->pending = false;
req->length = len;
notify = req->buf;
@@ -470,15 +530,16 @@ static int acm_cdc_notify(struct f_acm *acm, u8 type, u16 value,
static int acm_notify_serial_state(struct f_acm *acm)
{
+ struct usb_composite_dev *cdev = acm->port.func.config->cdev;
int status;
if (acm->notify_req) {
- VDBG(cdev, "acm ttyGS%d serial state %04x\n",
+ DBG(cdev, "acm ttyGS%d serial state %04x\n",
acm->port_num, acm->serial_state);
status = acm_cdc_notify(acm, USB_CDC_NOTIFY_SERIAL_STATE,
0, &acm->serial_state, sizeof(acm->serial_state));
} else {
- acm->pending = 1;
+ acm->pending = true;
status = 0;
}
@@ -488,8 +549,11 @@ static int acm_notify_serial_state(struct f_acm *acm)
static void acm_cdc_notify_complete(struct usb_ep *ep, struct usb_request *req)
{
struct f_acm *acm = req->context;
- u8 doit = 0;
+ u8 doit = false;
+ /* on this call path we do NOT hold the port spinlock,
+ * which is why ACM needs its own spinlock
+ */
if (req->status != -ESHUTDOWN)
doit = acm->pending;
acm->notify_req = req;
@@ -533,19 +597,34 @@ static int acm_send_break(struct gserial *port, int duration)
/*-------------------------------------------------------------------------*/
/* ACM function driver setup/binding */
-static int __init
+static int
acm_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_acm *acm = func_to_acm(f);
+ struct usb_string *us;
int status;
struct usb_ep *ep;
+ /* REVISIT might want instance-specific strings to help
+ * distinguish instances ...
+ */
+
+ /* maybe allocate device-global string IDs, and patch descriptors */
+ us = usb_gstrings_attach(cdev, acm_strings,
+ ARRAY_SIZE(acm_string_defs));
+ if (IS_ERR(us))
+ return PTR_ERR(us);
+ acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
+ acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
+ acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
+
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
acm->ctrl_id = status;
+ acm_iad_descriptor.bFirstInterface = status;
acm_control_interface_desc.bInterfaceNumber = status;
acm_union_desc .bMasterInterface0 = status;
@@ -589,43 +668,26 @@ acm_bind(struct usb_configuration *c, struct usb_function *f)
acm->notify_req->complete = acm_cdc_notify_complete;
acm->notify_req->context = acm;
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(acm_fs_function);
- if (!f->descriptors)
- goto fail;
-
- acm->fs.in = usb_find_endpoint(acm_fs_function,
- f->descriptors, &acm_fs_in_desc);
- acm->fs.out = usb_find_endpoint(acm_fs_function,
- f->descriptors, &acm_fs_out_desc);
- acm->fs.notify = usb_find_endpoint(acm_fs_function,
- f->descriptors, &acm_fs_notify_desc);
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- acm_hs_in_desc.bEndpointAddress =
- acm_fs_in_desc.bEndpointAddress;
- acm_hs_out_desc.bEndpointAddress =
- acm_fs_out_desc.bEndpointAddress;
- acm_hs_notify_desc.bEndpointAddress =
- acm_fs_notify_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(acm_hs_function);
-
- acm->hs.in = usb_find_endpoint(acm_hs_function,
- f->hs_descriptors, &acm_hs_in_desc);
- acm->hs.out = usb_find_endpoint(acm_hs_function,
- f->hs_descriptors, &acm_hs_out_desc);
- acm->hs.notify = usb_find_endpoint(acm_hs_function,
- f->hs_descriptors, &acm_hs_notify_desc);
- }
+ acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+ acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+ acm_hs_notify_desc.bEndpointAddress =
+ acm_fs_notify_desc.bEndpointAddress;
+
+ acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
+ acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
+
+ status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
+ acm_ss_function);
+ if (status)
+ goto fail;
DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
acm->port_num,
+ gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
acm->port.in->name, acm->port.out->name,
acm->notify->name);
@@ -648,80 +710,31 @@ fail:
return status;
}
-static void
-acm_unbind(struct usb_configuration *c, struct usb_function *f)
+static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
- gs_free_req(acm->notify, acm->notify_req);
- kfree(acm);
+ acm_string_defs[0].id = 0;
+ usb_free_all_descriptors(f);
+ if (acm->notify_req)
+ gs_free_req(acm->notify, acm->notify_req);
}
-/* Some controllers can't support CDC ACM ... */
-static inline int can_support_cdc(struct usb_configuration *c)
+static void acm_free_func(struct usb_function *f)
{
- /* SH3 doesn't support multiple interfaces */
- if (gadget_is_sh(c->cdev->gadget))
- return 0;
-
- /* sa1100 doesn't have a third interrupt endpoint */
- if (gadget_is_sa1100(c->cdev->gadget))
- return 0;
+ struct f_acm *acm = func_to_acm(f);
- /* everything else is *probably* fine ... */
- return 1;
+ kfree(acm);
}
-/**
- * acm_bind_config - add a CDC ACM function to a configuration
- * @c: the configuration to support the CDC ACM instance
- * @port_num: /dev/ttyGS* port this interface will use
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gserial_setup() with enough ports to
- * handle all the ones it binds. Caller is also responsible
- * for calling @gserial_cleanup() before module unload.
- */
-int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
+static struct usb_function *acm_alloc_func(struct usb_function_instance *fi)
{
- struct f_acm *acm;
- int status;
-
- if (!can_support_cdc(c))
- return -EINVAL;
-
- /* REVISIT might want instance-specific strings to help
- * distinguish instances ...
- */
-
- /* maybe allocate device-global string IDs, and patch descriptors */
- if (acm_string_defs[ACM_CTRL_IDX].id == 0) {
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- acm_string_defs[ACM_CTRL_IDX].id = status;
-
- acm_control_interface_desc.iInterface = status;
-
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- acm_string_defs[ACM_DATA_IDX].id = status;
+ struct f_serial_opts *opts;
+ struct f_acm *acm;
- acm_data_interface_desc.iInterface = status;
- }
-
- /* allocate and initialize one new instance */
- acm = kzalloc(sizeof *acm, GFP_KERNEL);
+ acm = kzalloc(sizeof(*acm), GFP_KERNEL);
if (!acm)
- return -ENOMEM;
-
- acm->port_num = port_num;
+ return ERR_PTR(-ENOMEM);
acm->port.connect = acm_connect;
acm->port.disconnect = acm_disconnect;
@@ -731,13 +744,42 @@ int __init acm_bind_config(struct usb_configuration *c, u8 port_num)
acm->port.func.strings = acm_strings;
/* descriptors are per-instance copies */
acm->port.func.bind = acm_bind;
- acm->port.func.unbind = acm_unbind;
acm->port.func.set_alt = acm_set_alt;
acm->port.func.setup = acm_setup;
acm->port.func.disable = acm_disable;
- status = usb_add_function(c, &acm->port.func);
- if (status)
- kfree(acm);
- return status;
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+ acm->port_num = opts->port_num;
+ acm->port.func.unbind = acm_unbind;
+ acm->port.func.free_func = acm_free_func;
+
+ return &acm->port.func;
+}
+
+static void acm_free_instance(struct usb_function_instance *fi)
+{
+ struct f_serial_opts *opts;
+
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+ gserial_free_line(opts->port_num);
+ kfree(opts);
+}
+
+static struct usb_function_instance *acm_alloc_instance(void)
+{
+ struct f_serial_opts *opts;
+ int ret;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+ opts->func_inst.free_func_inst = acm_free_instance;
+ ret = gserial_alloc_line(&opts->port_num);
+ if (ret) {
+ kfree(opts);
+ return ERR_PTR(ret);
+ }
+ return &opts->func_inst;
}
+DECLARE_USB_FUNCTION_INIT(acm, acm_alloc_instance, acm_alloc_func);
+MODULE_LICENSE("GPL");
diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c
index b933105..39c4444 100644
--- a/drivers/usb/gadget/f_serial.c
+++ b/drivers/usb/gadget/f_serial.c
@@ -12,9 +12,11 @@
#include <common.h>
#include <asm/byteorder.h>
+#include <linux/err.h>
-#include "gadget_chips.h"
#include "u_serial.h"
+#include "gadget_chips.h"
+
/*
* This function packages a simple "generic serial" port with no real
@@ -25,18 +27,10 @@
* if you can arrange appropriate host side drivers.
*/
-struct gser_descs {
- struct usb_endpoint_descriptor *in;
- struct usb_endpoint_descriptor *out;
-};
-
struct f_gser {
struct gserial port;
u8 data_id;
u8 port_num;
-
- struct gser_descs fs;
- struct gser_descs hs;
};
static inline struct f_gser *func_to_gser(struct usb_function *f)
@@ -105,6 +99,34 @@ static struct usb_descriptor_header *gser_hs_function[] = {
NULL,
};
+static struct usb_endpoint_descriptor gser_ss_in_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_endpoint_descriptor gser_ss_out_desc = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize = cpu_to_le16(1024),
+};
+
+static struct usb_ss_ep_comp_descriptor gser_ss_bulk_comp_desc = {
+ .bLength = sizeof gser_ss_bulk_comp_desc,
+ .bDescriptorType = USB_DT_SS_ENDPOINT_COMP,
+};
+
+static struct usb_descriptor_header *gser_ss_function[] = {
+ (struct usb_descriptor_header *) &gser_interface_desc,
+ (struct usb_descriptor_header *) &gser_ss_in_desc,
+ (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+ (struct usb_descriptor_header *) &gser_ss_out_desc,
+ (struct usb_descriptor_header *) &gser_ss_bulk_comp_desc,
+ NULL,
+};
+
/* string descriptors: */
static struct usb_string gser_string_defs[] = {
@@ -133,21 +155,25 @@ static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
if (gser->port.in->driver_data) {
DBG(cdev, "reset generic ttyGS%d\n", gser->port_num);
- } else {
+ gserial_disconnect(&gser->port);
+ }
+ if (!gser->port.in->desc || !gser->port.out->desc) {
DBG(cdev, "activate generic ttyGS%d\n", gser->port_num);
- gser->port.in_desc = ep_choose(cdev->gadget,
- gser->hs.in, gser->fs.in);
- gser->port.out_desc = ep_choose(cdev->gadget,
- gser->hs.out, gser->fs.out);
- gserial_connect(&gser->port, gser->port_num);
+ if (config_ep_by_speed(cdev->gadget, f, gser->port.in) ||
+ config_ep_by_speed(cdev->gadget, f, gser->port.out)) {
+ gser->port.in->desc = NULL;
+ gser->port.out->desc = NULL;
+ return -EINVAL;
+ }
}
-
+ gserial_connect(&gser->port, gser->port_num);
return 0;
}
static void gser_disable(struct usb_function *f)
{
- struct f_gser *gser = func_to_gser(f);
+ struct f_gser *gser = func_to_gser(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
DBG(cdev, "generic ttyGS%d deactivated\n", gser->port_num);
gserial_disconnect(&gser->port);
@@ -157,14 +183,25 @@ static void gser_disable(struct usb_function *f)
/* serial function driver setup/binding */
-static int
-gser_bind(struct usb_configuration *c, struct usb_function *f)
+static int gser_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_gser *gser = func_to_gser(f);
int status;
struct usb_ep *ep;
+ /* REVISIT might want instance-specific strings to help
+ * distinguish instances ...
+ */
+
+ /* maybe allocate device-global string ID */
+ if (gser_string_defs[0].id == 0) {
+ status = usb_string_id(c->cdev);
+ if (status < 0)
+ return status;
+ gser_string_defs[0].id = status;
+ }
+
/* allocate instance-specific interface IDs */
status = usb_interface_id(c, f);
if (status < 0)
@@ -187,36 +224,23 @@ gser_bind(struct usb_configuration *c, struct usb_function *f)
gser->port.out = ep;
ep->driver_data = cdev; /* claim */
- /* copy descriptors, and track endpoint copies */
- f->descriptors = usb_copy_descriptors(gser_fs_function);
-
- gser->fs.in = usb_find_endpoint(gser_fs_function,
- f->descriptors, &gser_fs_in_desc);
- gser->fs.out = usb_find_endpoint(gser_fs_function,
- f->descriptors, &gser_fs_out_desc);
-
-
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
- if (gadget_is_dualspeed(c->cdev->gadget)) {
- gser_hs_in_desc.bEndpointAddress =
- gser_fs_in_desc.bEndpointAddress;
- gser_hs_out_desc.bEndpointAddress =
- gser_fs_out_desc.bEndpointAddress;
-
- /* copy descriptors, and track endpoint copies */
- f->hs_descriptors = usb_copy_descriptors(gser_hs_function);
-
- gser->hs.in = usb_find_endpoint(gser_hs_function,
- f->hs_descriptors, &gser_hs_in_desc);
- gser->hs.out = usb_find_endpoint(gser_hs_function,
- f->hs_descriptors, &gser_hs_out_desc);
- }
+ gser_hs_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+ gser_hs_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
+
+ gser_ss_in_desc.bEndpointAddress = gser_fs_in_desc.bEndpointAddress;
+ gser_ss_out_desc.bEndpointAddress = gser_fs_out_desc.bEndpointAddress;
+ status = usb_assign_descriptors(f, gser_fs_function, gser_hs_function,
+ gser_ss_function);
+ if (status)
+ goto fail;
DBG(cdev, "generic ttyGS%d: %s speed IN/%s OUT/%s\n",
gser->port_num,
+ gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
gser->port.in->name, gser->port.out->name);
return 0;
@@ -233,50 +257,60 @@ fail:
return status;
}
-static void
-gser_unbind(struct usb_configuration *c, struct usb_function *f)
+static void gser_free_inst(struct usb_function_instance *f)
{
- if (gadget_is_dualspeed(c->cdev->gadget))
- usb_free_descriptors(f->hs_descriptors);
- usb_free_descriptors(f->descriptors);
- kfree(func_to_gser(f));
+ struct f_serial_opts *opts;
+
+ opts = container_of(f, struct f_serial_opts, func_inst);
+ gserial_free_line(opts->port_num);
+ kfree(opts);
}
-/**
- * gser_bind_config - add a generic serial function to a configuration
- * @c: the configuration to support the serial instance
- * @port_num: /dev/ttyGS* port this interface will use
- * Context: single threaded during gadget setup
- *
- * Returns zero on success, else negative errno.
- *
- * Caller must have called @gserial_setup() with enough ports to
- * handle all the ones it binds. Caller is also responsible
- * for calling @gserial_cleanup() before module unload.
- */
-int gser_bind_config(struct usb_configuration *c, u8 port_num)
+static struct usb_function_instance *gser_alloc_inst(void)
{
- struct f_gser *gser;
- int status;
+ struct f_serial_opts *opts;
+ int ret;
+
+ opts = kzalloc(sizeof(*opts), GFP_KERNEL);
+ if (!opts)
+ return ERR_PTR(-ENOMEM);
+
+ opts->func_inst.free_func_inst = gser_free_inst;
+ ret = gserial_alloc_line(&opts->port_num);
+ if (ret) {
+ kfree(opts);
+ return ERR_PTR(ret);
+ }
- /* REVISIT might want instance-specific strings to help
- * distinguish instances ...
- */
+ return &opts->func_inst;
+}
- /* maybe allocate device-global string ID */
- if (gser_string_defs[0].id == 0) {
- status = usb_string_id(c->cdev);
- if (status < 0)
- return status;
- gser_string_defs[0].id = status;
- }
+static void gser_free(struct usb_function *f)
+{
+ struct f_gser *serial;
+
+ serial = func_to_gser(f);
+ kfree(serial);
+}
+
+static void gser_unbind(struct usb_configuration *c, struct usb_function *f)
+{
+ usb_free_all_descriptors(f);
+}
+
+static struct usb_function *gser_alloc(struct usb_function_instance *fi)
+{
+ struct f_gser *gser;
+ struct f_serial_opts *opts;
/* allocate and initialize one new instance */
- gser = kzalloc(sizeof *gser, GFP_KERNEL);
+ gser = kzalloc(sizeof(*gser), GFP_KERNEL);
if (!gser)
- return -ENOMEM;
+ return ERR_PTR(-ENOMEM);
- gser->port_num = port_num;
+ opts = container_of(fi, struct f_serial_opts, func_inst);
+
+ gser->port_num = opts->port_num;
gser->port.func.name = "gser";
gser->port.func.strings = gser_strings;
@@ -284,9 +318,12 @@ int gser_bind_config(struct usb_configuration *c, u8 port_num)
gser->port.func.unbind = gser_unbind;
gser->port.func.set_alt = gser_set_alt;
gser->port.func.disable = gser_disable;
+ gser->port.func.free_func = gser_free;
- status = usb_add_function(c, &gser->port.func);
- if (status)
- kfree(gser);
- return status;
+ return &gser->port.func;
}
+
+DECLARE_USB_FUNCTION_INIT(gser, gser_alloc_inst, gser_alloc);
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
diff --git a/drivers/usb/gadget/fsl_udc.c b/drivers/usb/gadget/fsl_udc.c
index 50bae78..3cfeb8a 100644
--- a/drivers/usb/gadget/fsl_udc.c
+++ b/drivers/usb/gadget/fsl_udc.c
@@ -1999,58 +1999,33 @@ int usb_gadget_poll(void)
* Hook to gadget drivers
* Called by initialization code of gadget drivers
*----------------------------------------------------------------*/
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+static int fsl_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
{
- int retval = -ENODEV;
-
- if (!udc_controller)
- return -ENODEV;
-
- if (!driver || (driver->speed != USB_SPEED_FULL
- && driver->speed != USB_SPEED_HIGH)
- || !driver->bind || !driver->disconnect
- || !driver->setup)
- return -EINVAL;
-
- if (udc_controller->driver)
- return -EBUSY;
+ /*
+ * We currently have PHY no driver which could call vbus_connect,
+ * so when the USB gadget core calls usb_gadget_connect() the
+ * driver decides to disable the device because it has no vbus.
+ * Work around this by enabling vbus here.
+ */
+ usb_gadget_vbus_connect(gadget);
/* hook up the driver */
udc_controller->driver = driver;
- /* bind udc driver to gadget driver */
- retval = driver->bind(&udc_controller->gadget);
- if (retval) {
- VDBG("bind to gadget --> %d", retval);
- udc_controller->driver = NULL;
- goto out;
- }
-
/* Enable DR IRQ reg and Set usbcmd reg Run bit */
dr_controller_run(udc_controller);
udc_controller->usb_state = USB_STATE_ATTACHED;
udc_controller->ep0_state = WAIT_FOR_SETUP;
udc_controller->ep0_dir = 0;
-out:
- if (retval)
- printk(KERN_WARNING "gadget driver register failed %d\n",
- retval);
- return retval;
+ return 0;
}
-EXPORT_SYMBOL(usb_gadget_register_driver);
/* Disconnect from gadget driver */
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int fsl_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
{
struct fsl_ep *loop_ep;
- if (!udc_controller)
- return -ENODEV;
-
- if (!driver || driver != udc_controller->driver || !driver->unbind)
- return -EINVAL;
-
/* stop DR, disable intr */
dr_controller_stop(udc_controller);
@@ -2066,16 +2041,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
ep.ep_list)
nuke(loop_ep, -ESHUTDOWN);
- /* report disconnect; the controller is already quiesced */
- driver->disconnect(&udc_controller->gadget);
-
- /* unbind gadget and unhook driver. */
- driver->unbind(&udc_controller->gadget);
- udc_controller->driver = NULL;
-
return 0;
}
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
static int struct_udc_setup(struct fsl_udc *udc,
struct device_d *dev)
@@ -2202,12 +2169,14 @@ static int fsl_pullup(struct usb_gadget *gadget, int is_on)
udc = container_of(gadget, struct fsl_udc, gadget);
udc->softconnect = (is_on != 0);
- if (can_pullup(udc))
+
+ if (can_pullup(udc)) {
writel((readl(&dr_regs->usbcmd) | USB_CMD_RUN_STOP),
&dr_regs->usbcmd);
- else
+ } else {
writel((readl(&dr_regs->usbcmd) & ~USB_CMD_RUN_STOP),
&dr_regs->usbcmd);
+ }
return 0;
}
@@ -2220,6 +2189,8 @@ static struct usb_gadget_ops fsl_gadget_ops = {
.vbus_session = fsl_vbus_session,
.vbus_draw = fsl_vbus_draw,
.pullup = fsl_pullup,
+ .udc_start = fsl_udc_start,
+ .udc_stop = fsl_udc_stop,
};
/*----------------------------------------------------------------
@@ -2243,7 +2214,7 @@ static int __init struct_ep_setup(struct fsl_udc *udc, unsigned char index,
/* for ep0: maxP defined in desc
* for other eps, maxP is set by epautoconfig() called by gadget layer
*/
- ep->ep.maxpacket = (unsigned short) ~0;
+ usb_ep_set_maxpacket_limit(&ep->ep, (unsigned short) ~0);
/* the queue lists any req for this ep */
INIT_LIST_HEAD(&ep->queue);
@@ -2300,10 +2271,10 @@ int ci_udc_register(struct device_d *dev, void __iomem *regs)
/* Setup gadget structure */
udc_controller->gadget.ops = &fsl_gadget_ops;
- udc_controller->gadget.is_dualspeed = 1;
udc_controller->gadget.ep0 = &udc_controller->eps[0].ep;
INIT_LIST_HEAD(&udc_controller->gadget.ep_list);
udc_controller->gadget.speed = USB_SPEED_UNKNOWN;
+ udc_controller->gadget.max_speed = USB_SPEED_HIGH;
udc_controller->gadget.name = "fsl-usb2-udc";
/* setup QH and epctrl for ep0 */
@@ -2330,6 +2301,11 @@ int ci_udc_register(struct device_d *dev, void __iomem *regs)
poller_register(&poller);
+ ret = usb_add_gadget_udc_release(dev, &udc_controller->gadget,
+ NULL);
+ if (ret)
+ goto err_out;
+
return 0;
err_out:
return ret;
diff --git a/drivers/usb/gadget/functions.c b/drivers/usb/gadget/functions.c
new file mode 100644
index 0000000..3b5d4df
--- /dev/null
+++ b/drivers/usb/gadget/functions.c
@@ -0,0 +1,99 @@
+#include <common.h>
+#include <linux/err.h>
+
+#include <usb/composite.h>
+
+static LIST_HEAD(func_list);
+
+static struct usb_function_instance *try_get_usb_function_instance(const char *name)
+{
+ struct usb_function_driver *fd;
+ struct usb_function_instance *fi;
+
+ fi = ERR_PTR(-ENOENT);
+
+ list_for_each_entry(fd, &func_list, list) {
+
+ if (strcmp(name, fd->name))
+ continue;
+
+ fi = fd->alloc_inst();
+ if (!IS_ERR(fi))
+ fi->fd = fd;
+ break;
+ }
+
+ return fi;
+}
+
+struct usb_function_instance *usb_get_function_instance(const char *name)
+{
+ struct usb_function_instance *fi;
+ int ret;
+
+ fi = try_get_usb_function_instance(name);
+ if (!IS_ERR(fi))
+ return fi;
+ ret = PTR_ERR(fi);
+ if (ret != -ENOENT)
+ return fi;
+ return try_get_usb_function_instance(name);
+}
+EXPORT_SYMBOL_GPL(usb_get_function_instance);
+
+struct usb_function *usb_get_function(struct usb_function_instance *fi)
+{
+ struct usb_function *f;
+
+ f = fi->fd->alloc_func(fi);
+ if (IS_ERR(f))
+ return f;
+ f->fi = fi;
+ return f;
+}
+EXPORT_SYMBOL_GPL(usb_get_function);
+
+void usb_put_function_instance(struct usb_function_instance *fi)
+{
+ struct module *mod;
+
+ if (!fi)
+ return;
+
+ mod = fi->fd->mod;
+ fi->free_func_inst(fi);
+}
+EXPORT_SYMBOL_GPL(usb_put_function_instance);
+
+void usb_put_function(struct usb_function *f)
+{
+ if (!f)
+ return;
+
+ f->free_func(f);
+}
+EXPORT_SYMBOL_GPL(usb_put_function);
+
+int usb_function_register(struct usb_function_driver *newf)
+{
+ struct usb_function_driver *fd;
+ int ret;
+
+ ret = -EEXIST;
+
+ list_for_each_entry(fd, &func_list, list) {
+ if (!strcmp(fd->name, newf->name))
+ goto out;
+ }
+ ret = 0;
+ list_add_tail(&newf->list, &func_list);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_function_register);
+
+void usb_function_unregister(struct usb_function_driver *fd)
+{
+ list_del(&fd->list);
+}
+EXPORT_SYMBOL_GPL(usb_function_unregister);
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 8e8190b..c41336f 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -1,7 +1,55 @@
-#define gadget_is_pxa(x) 0
-#define gadget_is_goku(x) 0
-#define gadget_is_sh(x) 0
-#define gadget_is_mq11xx(x) 0
-#define gadget_is_net2280(x) 0
-#define gadget_is_sa1100(x) 0
+/*
+ * USB device controllers have lots of quirks. Use these macros in
+ * gadget drivers or other code that needs to deal with them, and which
+ * autoconfigures instead of using early binding to the hardware.
+ *
+ * This SHOULD eventually work like the ARM mach_is_*() stuff, driven by
+ * some config file that gets updated as new hardware is supported.
+ * (And avoiding all runtime comparisons in typical one-choice configs!)
+ *
+ * NOTE: some of these controller drivers may not be available yet.
+ * Some are available on 2.4 kernels; several are available, but not
+ * yet pushed in the 2.6 mainline tree.
+ */
+#ifndef __GADGET_CHIPS_H
+#define __GADGET_CHIPS_H
+
+#include <usb/gadget.h>
+
+/*
+ * NOTICE: the entries below are alphabetical and should be kept
+ * that way.
+ *
+ * Always be sure to add new entries to the correct position or
+ * accept the bashing later.
+ *
+ * If you have forgotten the alphabetical order let VIM/EMACS
+ * do that for you.
+ */
+#define gadget_is_at91(g) (!strcmp("at91_udc", (g)->name))
+#define gadget_is_goku(g) (!strcmp("goku_udc", (g)->name))
+#define gadget_is_musbhdrc(g) (!strcmp("musb-hdrc", (g)->name))
+#define gadget_is_net2280(g) (!strcmp("net2280", (g)->name))
+#define gadget_is_pxa(g) (!strcmp("pxa25x_udc", (g)->name))
+#define gadget_is_pxa27x(g) (!strcmp("pxa27x_udc", (g)->name))
+
+/**
+ * gadget_supports_altsettings - return true if altsettings work
+ * @gadget: the gadget in question
+ */
+static inline bool gadget_supports_altsettings(struct usb_gadget *gadget)
+{
+ /* PXA 21x/25x/26x has no altsettings at all */
+ if (gadget_is_pxa(gadget))
+ return false;
+
+ /* PXA 27x and 3xx have *broken* altsetting support */
+ if (gadget_is_pxa27x(gadget))
+ return false;
+
+ /* Everything else is *presumably* fine ... */
+ return true;
+}
+
+#endif /* __GADGET_CHIPS_H */
diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c
index b18d7c5..6cc4dd7 100644
--- a/drivers/usb/gadget/pxa27x_udc.c
+++ b/drivers/usb/gadget/pxa27x_udc.c
@@ -882,11 +882,16 @@ static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active)
return 0;
}
+static int pxa_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver);
+static int pxa_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver);
+
static const struct usb_gadget_ops pxa_udc_ops = {
.get_frame = pxa_udc_get_frame,
.wakeup = pxa_udc_wakeup,
.pullup = pxa_udc_pullup,
.vbus_session = pxa_udc_vbus_session,
+ .udc_start = pxa_udc_start,
+ .udc_stop = pxa_udc_stop,
};
static void clk_enable(void)
@@ -976,40 +981,20 @@ static void udc_enable(struct pxa_udc *udc)
udc->enabled = 1;
}
-int usb_gadget_register_driver(struct usb_gadget_driver *driver)
+static int pxa_udc_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
{
struct pxa_udc *udc = the_controller;
- int retval;
-
- if (!driver || driver->speed < USB_SPEED_FULL || !driver->bind
- || !driver->disconnect || !driver->setup)
- return -EINVAL;
- if (!udc)
- return -ENODEV;
- if (udc->driver)
- return -EBUSY;
/* first hook up the driver ... */
udc->driver = driver;
- dplus_pullup(udc, 1);
- retval = driver->bind(&udc->gadget);
- if (retval) {
- dev_err(udc->dev, "bind to function %s --> error %d\n",
- driver->function, retval);
- goto bind_fail;
- }
dev_dbg(udc->dev, "registered gadget function '%s'\n",
driver->function);
if (should_enable_udc(udc))
udc_enable(udc);
return 0;
-
-bind_fail:
- return retval;
}
-EXPORT_SYMBOL(usb_gadget_register_driver);
static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
{
@@ -1027,7 +1012,7 @@ static void stop_activity(struct pxa_udc *udc, struct usb_gadget_driver *driver)
driver->disconnect(&udc->gadget);
}
-int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+static int pxa_udc_stop(struct usb_gadget *gadget, struct usb_gadget_driver *driver)
{
struct pxa_udc *udc = the_controller;
@@ -1038,7 +1023,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
stop_activity(udc, driver);
udc_disable(udc);
- dplus_pullup(udc, 0);
driver->disconnect(&udc->gadget);
driver->unbind(&udc->gadget);
@@ -1050,7 +1034,6 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
*/
return 0;
}
-EXPORT_SYMBOL(usb_gadget_unregister_driver);
static void handle_ep0_ctrl_req(struct pxa_udc *udc,
struct pxa27x_request *req)
@@ -1481,7 +1464,7 @@ static struct poller_struct poller = {
static int __init pxa_udc_probe(struct device_d *dev)
{
struct pxa_udc *udc = &memory;
- int gpio;
+ int gpio, ret;
udc->regs = dev_request_mem_region(dev, 0);
if (!udc->regs)
@@ -1503,6 +1486,10 @@ static int __init pxa_udc_probe(struct device_d *dev)
pxa_eps_setup(udc);
poller_register(&poller);
+ ret = usb_add_gadget_udc_release(dev, &udc->gadget, NULL);
+ if (ret)
+ return ret;
+
return 0;
}
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 98a501b..b3314a3 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -1,6 +1,19 @@
+/*
+ * serial.c -- USB gadget serial driver
+ *
+ * Copyright (C) 2003 Al Borchers (alborchers@steinerpoint.com)
+ * Copyright (C) 2008 by David Brownell
+ * Copyright (C) 2008 by Nokia Corporation
+ *
+ * This software is distributed under the terms of the GNU General
+ * Public License ("GPL") as published by the Free Software Foundation,
+ * either version 2 of that License or (at your option) any later version.
+ */
+
#include <common.h>
#include <errno.h>
#include <init.h>
+#include <linux/err.h>
#include <usb/ch9.h>
#include <usb/gadget.h>
#include <usb/composite.h>
@@ -8,6 +21,8 @@
#include <asm/byteorder.h>
#include "u_serial.h"
+#include "gadget_chips.h"
+
/* Defines */
@@ -17,6 +32,9 @@
#define GS_LONG_NAME "Gadget Serial"
#define GS_VERSION_NAME GS_LONG_NAME " " GS_VERSION_STR
+/*-------------------------------------------------------------------------*/
+static struct usb_composite_overwrite coverwrite;
+
/* Thanks to NetChip Technologies for donating this product ID.
*
* DO NOT REUSE THESE IDs with a protocol-incompatible driver!! Ever!!
@@ -29,15 +47,12 @@
/* string IDs are assigned dynamically */
-#define STRING_MANUFACTURER_IDX 0
-#define STRING_PRODUCT_IDX 1
-#define STRING_DESCRIPTION_IDX 2
-
-static char manufacturer[50];
+#define STRING_DESCRIPTION_IDX USB_GADGET_FIRST_AVAIL_IDX
static struct usb_string strings_dev[] = {
- [STRING_MANUFACTURER_IDX].s = manufacturer,
- [STRING_PRODUCT_IDX].s = GS_VERSION_NAME,
+ [USB_GADGET_MANUFACTURER_IDX].s = "",
+ [USB_GADGET_PRODUCT_IDX].s = GS_VERSION_NAME,
+ [USB_GADGET_SERIAL_IDX].s = "",
[STRING_DESCRIPTION_IDX].s = NULL /* updated; f(use_acm) */,
{ } /* end of list */
};
@@ -52,30 +67,6 @@ static struct usb_gadget_strings *dev_strings[] = {
NULL,
};
-static int use_acm = 1;
-#ifdef HAVE_OBEX
-static int use_obex = 0;
-#endif
-static unsigned n_ports = 1;
-
-static int serial_bind_config(struct usb_configuration *c)
-{
- unsigned i;
- int status = 0;
-
- for (i = 0; i < n_ports && status == 0; i++) {
- if (use_acm)
- status = acm_bind_config(c, i);
-#ifdef HAVE_OBEX
- else if (use_obex)
- status = obex_bind_config(c, i);
-#endif
- else
- status = gser_bind_config(c, i);
- }
- return status;
-}
-
static struct usb_device_descriptor device_desc = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
@@ -86,97 +77,164 @@ static struct usb_device_descriptor device_desc = {
/* .bMaxPacketSize0 = f(hardware) */
.idVendor = cpu_to_le16(GS_VENDOR_ID),
/* .idProduct = f(use_acm) */
- /* .bcdDevice = f(hardware) */
+ .bcdDevice = cpu_to_le16(GS_VERSION_NUM),
/* .iManufacturer = DYNAMIC */
/* .iProduct = DYNAMIC */
.bNumConfigurations = 1,
};
+static struct usb_otg_descriptor otg_descriptor = {
+ .bLength = sizeof otg_descriptor,
+ .bDescriptorType = USB_DT_OTG,
+
+ /* REVISIT SRP-only hardware is possible, although
+ * it would not be called "OTG" ...
+ */
+ .bmAttributes = USB_OTG_SRP | USB_OTG_HNP,
+};
+
+static const struct usb_descriptor_header *otg_desc[] = {
+ (struct usb_descriptor_header *) &otg_descriptor,
+ NULL,
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* Module */
+MODULE_DESCRIPTION(GS_VERSION_NAME);
+MODULE_AUTHOR("Al Borchers");
+MODULE_AUTHOR("David Brownell");
+MODULE_LICENSE("GPL");
+
+static bool use_acm = true;
+
+static bool use_obex = false;
+
+static unsigned n_ports = 1;
+
+/*-------------------------------------------------------------------------*/
+
static struct usb_configuration serial_config_driver = {
/* .label = f(use_acm) */
- .bind = serial_bind_config,
/* .bConfigurationValue = f(use_acm) */
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
};
-static int gs_bind(struct usb_composite_dev *cdev)
+static struct usb_function_instance *fi_serial[MAX_U_SERIAL_PORTS];
+static struct usb_function *f_serial[MAX_U_SERIAL_PORTS];
+
+static int serial_register_ports(struct usb_composite_dev *cdev,
+ struct usb_configuration *c, const char *f_name)
{
- int gcnum;
- struct usb_gadget *gadget = cdev->gadget;
- int status;
+ int i;
+ int ret;
+
+ ret = usb_add_config_only(cdev, c);
+ if (ret)
+ goto out;
+
+ for (i = 0; i < n_ports; i++) {
+
+ fi_serial[i] = usb_get_function_instance(f_name);
+ if (IS_ERR(fi_serial[i])) {
+ ret = PTR_ERR(fi_serial[i]);
+ goto fail;
+ }
+
+ f_serial[i] = usb_get_function(fi_serial[i]);
+ if (IS_ERR(f_serial[i])) {
+ ret = PTR_ERR(f_serial[i]);
+ goto err_get_func;
+ }
+
+ ret = usb_add_function(c, f_serial[i]);
+ if (ret)
+ goto err_add_func;
+ }
- status = gserial_setup(cdev->gadget, n_ports);
- if (status < 0)
- return status;
+ return 0;
- /* Allocate string descriptor numbers ... note that string
- * contents can be overridden by the composite_dev glue.
- */
+err_add_func:
+ usb_put_function(f_serial[i]);
+err_get_func:
+ usb_put_function_instance(fi_serial[i]);
- /* device description: manufacturer, product */
- sprintf(manufacturer, "barebox with %s",
- gadget->name);
- status = usb_string_id(cdev);
- if (status < 0)
- goto fail;
- strings_dev[STRING_MANUFACTURER_IDX].id = status;
-
- device_desc.iManufacturer = status;
+fail:
+ i--;
+ while (i >= 0) {
+ usb_remove_function(c, f_serial[i]);
+ usb_put_function(f_serial[i]);
+ usb_put_function_instance(fi_serial[i]);
+ i--;
+ }
+out:
+ return ret;
+}
- status = usb_string_id(cdev);
- if (status < 0)
- goto fail;
- strings_dev[STRING_PRODUCT_IDX].id = status;
+static int __init gs_bind(struct usb_composite_dev *cdev)
+{
+ int status;
- device_desc.iProduct = status;
+ /* Allocate string descriptor numbers ... note that string
+ * contents can be overridden by the composite_dev glue.
+ */
- /* config description */
- status = usb_string_id(cdev);
+ status = usb_string_ids_tab(cdev, strings_dev);
if (status < 0)
goto fail;
- strings_dev[STRING_DESCRIPTION_IDX].id = status;
-
+ device_desc.iManufacturer = strings_dev[USB_GADGET_MANUFACTURER_IDX].id;
+ device_desc.iProduct = strings_dev[USB_GADGET_PRODUCT_IDX].id;
+ status = strings_dev[STRING_DESCRIPTION_IDX].id;
serial_config_driver.iConfiguration = status;
- /* set up other descriptors */
-// gcnum = usb_gadget_controller_number(gadget);
- gcnum = 0x19;
- if (gcnum >= 0)
- device_desc.bcdDevice = cpu_to_le16(GS_VERSION_NUM | gcnum);
- else {
- /* this is so simple (for now, no altsettings) that it
- * SHOULD NOT have problems with bulk-capable hardware.
- * so warn about unrcognized controllers -- don't panic.
- *
- * things like configuration and altsetting numbering
- * can need hardware-specific attention though.
- */
- pr_warning("gs_bind: controller '%s' not recognized\n",
- gadget->name);
- device_desc.bcdDevice =
- cpu_to_le16(GS_VERSION_NUM | 0x0099);
+ if (gadget_is_otg(cdev->gadget)) {
+ serial_config_driver.descriptors = otg_desc;
+ serial_config_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
}
/* register our configuration */
- status = usb_add_config(cdev, &serial_config_driver);
+ if (use_acm) {
+ status = serial_register_ports(cdev, &serial_config_driver,
+ "acm");
+ usb_ep_autoconfig_reset(cdev->gadget);
+ } else if (use_obex)
+ status = serial_register_ports(cdev, &serial_config_driver,
+ "obex");
+ else {
+ status = serial_register_ports(cdev, &serial_config_driver,
+ "gser");
+ }
if (status < 0)
goto fail;
+ usb_composite_overwrite_options(cdev, &coverwrite);
INFO(cdev, "%s\n", GS_VERSION_NAME);
return 0;
fail:
-// gserial_cleanup();
return status;
}
+static int gs_unbind(struct usb_composite_dev *cdev)
+{
+ int i;
+
+ for (i = 0; i < n_ports; i++) {
+ usb_put_function(f_serial[i]);
+ usb_put_function_instance(fi_serial[i]);
+ }
+ return 0;
+}
+
static struct usb_composite_driver gserial_driver = {
.name = "g_serial",
.dev = &device_desc,
.strings = dev_strings,
+ .max_speed = USB_SPEED_SUPER,
.bind = gs_bind,
+ .unbind = gs_unbind,
};
int usb_serial_register(struct usb_serial_pdata *pdata)
@@ -185,32 +243,15 @@ int usb_serial_register(struct usb_serial_pdata *pdata)
* but neither of these product IDs was defined that way.
*/
+ use_acm = pdata->acm;
+
/*
* PXA CPU suffer a silicon bug which prevents them from being a
* compound device, forbiding the ACM configurations.
*/
-#ifdef CONFIG_ARCH_PXA2XX
- use_acm = 0;
-#endif
- switch (pdata->mode) {
- case 1:
-#ifdef HAVE_OBEX
- use_obex = 1;
-#endif
- use_acm = 0;
- break;
- case 2:
-#ifdef HAVE_OBEX
- use_obex = 1;
-#endif
+
+ if (IS_ENABLED(CONFIG_ARCH_PXA2XX))
use_acm = 0;
- break;
- default:
-#ifdef HAVE_OBEX
- use_obex = 0;
-#endif
- use_acm = 1;
- }
if (use_acm) {
serial_config_driver.label = "CDC ACM config";
@@ -218,32 +259,22 @@ int usb_serial_register(struct usb_serial_pdata *pdata)
device_desc.bDeviceClass = USB_CLASS_COMM;
device_desc.idProduct =
cpu_to_le16(GS_CDC_PRODUCT_ID);
- }
-#ifdef HAVE_OBEX
- else if (use_obex) {
- serial_config_driver.label = "CDC OBEX config";
- serial_config_driver.bConfigurationValue = 3;
- device_desc.bDeviceClass = USB_CLASS_COMM;
- device_desc.idProduct =
- cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID);
- }
-#endif
- else {
+ } else {
serial_config_driver.label = "Generic Serial config";
serial_config_driver.bConfigurationValue = 1;
device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
device_desc.idProduct =
cpu_to_le16(GS_PRODUCT_ID);
}
- strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label;
+
if (pdata->idVendor)
device_desc.idVendor = pdata->idVendor;
if (pdata->idProduct)
device_desc.idProduct = pdata->idProduct;
- strings_dev[STRING_MANUFACTURER_IDX].s = pdata->manufacturer;
- strings_dev[STRING_PRODUCT_IDX].s = pdata->productname;
+ strings_dev[USB_GADGET_MANUFACTURER_IDX].s = pdata->manufacturer;
+ strings_dev[USB_GADGET_PRODUCT_IDX].s = pdata->productname;
- return usb_composite_register(&gserial_driver);
+ return usb_composite_probe(&gserial_driver);
}
void usb_serial_unregister(void)
diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c
index 2f9353e..b6a4afd 100644
--- a/drivers/usb/gadget/u_serial.c
+++ b/drivers/usb/gadget/u_serial.c
@@ -22,6 +22,8 @@
#include <usb/cdc.h>
#include <kfifo.h>
#include <clock.h>
+#include <linux/err.h>
+#include <dma.h>
#include "u_serial.h"
@@ -31,11 +33,12 @@
* "serial port" functionality through the USB gadget stack. Each such
* port is exposed through a /dev/ttyGS* node.
*
- * After initialization (gserial_setup), these TTY port devices stay
- * available until they are removed (gserial_cleanup). Each one may be
- * connected to a USB function (gserial_connect), or disconnected (with
- * gserial_disconnect) when the USB host issues a config change event.
- * Data can only flow when the port is connected to the host.
+ * After this module has been loaded, the individual TTY port can be requested
+ * (gserial_alloc_line()) and it will stay available until they are removed
+ * (gserial_free_line()). Each one may be connected to a USB function
+ * (gserial_connect), or disconnected (with gserial_disconnect) when the USB
+ * host issues a config change event. Data can only flow when the port is
+ * connected to the host.
*
* A given TTY port can be made available in multiple configurations.
* For example, each one might expose a ttyGS0 node which provides a
@@ -74,21 +77,27 @@
* next layer of buffering. For TX that's a circular buffer; for RX
* consider it a NOP. A third layer is provided by the TTY code.
*/
-#define QUEUE_SIZE 128
+#define QUEUE_SIZE 16
#define WRITE_BUF_SIZE 8192 /* TX only */
#define RECV_FIFO_SIZE (1024 * 8)
+
+/* circular buffer */
+struct gs_buf {
+ unsigned buf_size;
+ char *buf_buf;
+ char *buf_get;
+ char *buf_put;
+};
+
/*
* The port structure holds info for each port, one for each minor number
* (and thus for each /dev/ node).
*/
struct gs_port {
-
struct gserial *port_usb;
struct console_device cdev;
struct kfifo *recv_fifo;
- unsigned open_count;
- int openclose; /* open/close in progress */
u8 port_num;
struct list_head read_pool;
@@ -100,12 +109,9 @@ struct gs_port {
struct usb_cdc_line_coding port_line_coding; /* 8-N-1 etc */
};
-/* increase N_PORTS if you need more */
-#define N_PORTS 4
static struct portmaster {
struct gs_port *port;
-} ports[N_PORTS];
-static unsigned n_ports;
+} ports[MAX_U_SERIAL_PORTS];
#define GS_CLOSE_TIMEOUT 15 /* seconds */
@@ -162,6 +168,10 @@ static void gs_read_complete(struct usb_ep *ep, struct usb_request *req)
gs_start_rx(port);
}
+/*-------------------------------------------------------------------------*/
+
+/* I/O glue between TTY (upper) and USB function (lower) driver layers */
+
static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
{
struct gs_port *port = ep->driver_data;
@@ -176,7 +186,6 @@ static void gs_write_complete(struct usb_ep *ep, struct usb_request *req)
/* FALL THROUGH */
case 0:
/* normal completion */
-// gs_start_tx(port);
break;
case -ESHUTDOWN:
@@ -201,11 +210,24 @@ gs_alloc_req(struct usb_ep *ep, unsigned len)
if (req != NULL) {
req->length = len;
- req->buf = xmemalign(32, len);
+ req->buf = dma_alloc(len);
}
return req;
}
+EXPORT_SYMBOL_GPL(gs_alloc_req);
+
+/*
+ * gs_free_req
+ *
+ * Free a usb_request and its buffer.
+ */
+void gs_free_req(struct usb_ep *ep, struct usb_request *req)
+{
+ kfree(req->buf);
+ usb_ep_free_request(ep, req);
+}
+EXPORT_SYMBOL_GPL(gs_free_req);
static void gs_free_requests(struct usb_ep *ep, struct list_head *head)
{
@@ -276,9 +298,7 @@ static int gs_start_io(struct gs_port *port)
started = gs_start_rx(port);
/* unblock any pending writes into our circular buffer */
- if (started) {
-// tty_wakeup(port->port_tty);
- } else {
+ if (!started) {
gs_free_requests(ep, head);
gs_free_requests(port->port_usb->in, &port->write_pool);
status = -EIO;
@@ -287,76 +307,84 @@ static int gs_start_io(struct gs_port *port)
return status;
}
-/*
- * gs_free_req
- *
- * Free a usb_request and its buffer.
- */
-void gs_free_req(struct usb_ep *ep, struct usb_request *req)
-{
- kfree(req->buf);
- usb_ep_free_request(ep, req);
-}
+/*-------------------------------------------------------------------------*/
-static int __init
+static int
gs_port_alloc(unsigned port_num, struct usb_cdc_line_coding *coding)
{
struct gs_port *port;
+ int ret = 0;
- port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
- if (port == NULL)
- return -ENOMEM;
+ if (ports[port_num].port) {
+ ret = -EBUSY;
+ goto out;
+ }
- port->port_num = port_num;
- port->port_line_coding = *coding;
+ port = kzalloc(sizeof(struct gs_port), GFP_KERNEL);
+ if (port == NULL) {
+ ret = -ENOMEM;
+ goto out;
+ }
INIT_LIST_HEAD(&port->read_pool);
INIT_LIST_HEAD(&port->write_pool);
+ port->port_num = port_num;
+ port->port_line_coding = *coding;
+
ports[port_num].port = port;
+out:
+ return ret;
+}
- return 0;
+static void gserial_free_port(struct gs_port *port)
+{
+ kfree(port);
}
-/**
- * gserial_setup - initialize TTY driver for one or more ports
- * @g: gadget to associate with these ports
- * @count: how many ports to support
- * Context: may sleep
- *
- * The TTY stack needs to know in advance how many devices it should
- * plan to manage. Use this call to set up the ports you will be
- * exporting through USB. Later, connect them to functions based
- * on what configuration is activated by the USB host; and disconnect
- * them as appropriate.
- *
- * An example would be a two-configuration device in which both
- * configurations expose port 0, but through different functions.
- * One configuration could even expose port 1 while the other
- * one doesn't.
- *
- * Returns negative errno or zero.
- */
-int __init gserial_setup(struct usb_gadget *g, unsigned count)
+void gserial_free_line(unsigned char port_num)
{
- struct usb_cdc_line_coding coding;
- int i, status;
+ struct gs_port *port;
- /* make devices be openable */
- for (i = 0; i < count; i++) {
- status = gs_port_alloc(i, &coding);
- if (status) {
- count = i;
- goto fail;
- }
+ if (WARN_ON(!ports[port_num].port))
+ return;
+
+ port = ports[port_num].port;
+ ports[port_num].port = NULL;
+
+ gserial_free_port(port);
+}
+EXPORT_SYMBOL_GPL(gserial_free_line);
+
+int gserial_alloc_line(unsigned char *line_num)
+{
+ struct usb_cdc_line_coding coding;
+ int ret;
+ int port_num;
+
+ coding.dwDTERate = cpu_to_le32(9600);
+ coding.bCharFormat = 8;
+ coding.bParityType = USB_CDC_NO_PARITY;
+ coding.bDataBits = USB_CDC_1_STOP_BITS;
+
+ for (port_num = 0; port_num < MAX_U_SERIAL_PORTS; port_num++) {
+ ret = gs_port_alloc(port_num, &coding);
+ if (ret == -EBUSY)
+ continue;
+ if (ret)
+ return ret;
+ break;
}
- n_ports = count;
- return 0;
-fail:
- while (count--)
- kfree(ports[count].port);
- return status;
+ if (ret)
+ return ret;
+
+ /* ... and sysfs class devices, so mdev/udev make /dev/ttyGS* */
+
+ *line_num = port_num;
+
+ return ret;
}
+EXPORT_SYMBOL_GPL(gserial_alloc_line);
static void serial_putc(struct console_device *cdev, char c)
{
@@ -422,33 +450,59 @@ timeout:
static void serial_flush(struct console_device *cdev)
{
}
+
static int serial_setbaudrate(struct console_device *cdev, int baudrate)
{
return 0;
}
-static struct console_device *mycdev;
-
+/**
+ * gserial_connect - notify TTY I/O glue that USB link is active
+ * @gser: the function, set up with endpoints and descriptors
+ * @port_num: which port is active
+ * Context: any (usually from irq)
+ *
+ * This is called activate endpoints and let the TTY layer know that
+ * the connection is active ... not unlike "carrier detect". It won't
+ * necessarily start I/O queues; unless the TTY is held open by any
+ * task, there would be no point. However, the endpoints will be
+ * activated so the USB host can perform I/O, subject to basic USB
+ * hardware flow control.
+ *
+ * Caller needs to have set up the endpoints and USB function in @dev
+ * before calling this, as well as the appropriate (speed-specific)
+ * endpoint descriptors, and also have allocate @port_num by calling
+ * @gserial_alloc_line().
+ *
+ * Returns negative errno or zero.
+ * On success, ep->driver_data will be overwritten.
+ */
int gserial_connect(struct gserial *gser, u8 port_num)
{
struct gs_port *port;
int status;
struct console_device *cdev;
- /* we "know" gserial_cleanup() hasn't been called */
- port = ports[port_num].port;
+ if (port_num >= MAX_U_SERIAL_PORTS)
+ return -ENXIO;
- /* In case of multiple activation (ie. multiple SET_INTERFACE) */
- if (port->port_usb)
- return 0;
+ port = ports[port_num].port;
+ if (!port) {
+ pr_err("serial line %d not allocated.\n", port_num);
+ return -EINVAL;
+ }
+ if (port->port_usb) {
+ pr_err("serial line %d is in use.\n", port_num);
+ return -EBUSY;
+ }
/* activate the endpoints */
- status = usb_ep_enable(gser->in, gser->in_desc);
+ status = usb_ep_enable(gser->in);
if (status < 0)
return status;
gser->in->driver_data = port;
- status = usb_ep_enable(gser->out, gser->out_desc);
+ status = usb_ep_enable(gser->out);
if (status < 0)
goto fail_out;
gser->out->driver_data = port;
@@ -481,7 +535,19 @@ int gserial_connect(struct gserial *gser, u8 port_num)
if (status)
goto fail_out;
- mycdev = cdev;
+ /* REVISIT if waiting on "carrier detect", signal. */
+
+ /* if it's already open, start I/O ... and notify the serial
+ * protocol about open/close status (connect/disconnect).
+ */
+ if (1) {
+ pr_debug("gserial_connect: start ttyGS%d\n", port->port_num);
+ if (gser->connect)
+ gser->connect(gser);
+ } else {
+ if (gser->disconnect)
+ gser->disconnect(gser);
+ }
return status;
@@ -490,27 +556,7 @@ fail_out:
gser->in->driver_data = NULL;
return status;
}
-#include <command.h>
-
-static int do_mycdev(int argc, char *argv[])
-{
-
- int i,j;
- for (i = 'a'; i < 'z'; i++) {
- mycdev->putc(mycdev, i);
- printf("%c", i);
- mdelay(500);
- for (j = 0; j < 100; j++)
- usb_gadget_poll();
- }
- return 0;
-}
-
-BAREBOX_CMD_START(mycdev)
- .cmd = do_mycdev,
- BAREBOX_CMD_GROUP(CMD_GRP_HWMANIP)
- BAREBOX_CMD_COMPLETE(empty_complete)
-BAREBOX_CMD_END
+EXPORT_SYMBOL_GPL(gserial_connect);
/**
* gserial_disconnect - notify TTY I/O glue that USB link is inactive
@@ -531,7 +577,10 @@ void gserial_disconnect(struct gserial *gser)
if (!port)
return;
+ cdev = &port->cdev;
+
/* tell the TTY glue not to do I/O here any more */
+ console_unregister(cdev);
/* REVISIT as above: how best to track this? */
port->port_line_coding = gser->port_line_coding;
@@ -550,6 +599,5 @@ void gserial_disconnect(struct gserial *gser)
gs_free_requests(gser->out, &port->read_pool);
gs_free_requests(gser->in, &port->write_pool);
- cdev = &port->cdev;
- console_unregister(cdev);
+ kfifo_free(port->recv_fifo);
}
diff --git a/drivers/usb/gadget/u_serial.h b/drivers/usb/gadget/u_serial.h
index 353ca10..72772da 100644
--- a/drivers/usb/gadget/u_serial.h
+++ b/drivers/usb/gadget/u_serial.h
@@ -15,6 +15,13 @@
#include <usb/composite.h>
#include <usb/cdc.h>
+#define MAX_U_SERIAL_PORTS 4
+
+struct f_serial_opts {
+ struct usb_function_instance func_inst;
+ u8 port_num;
+};
+
/*
* One non-multiplexed "serial" I/O port ... there can be several of these
* on any given USB peripheral device, if it provides enough endpoints.
@@ -35,8 +42,6 @@ struct gserial {
struct usb_ep *in;
struct usb_ep *out;
- struct usb_endpoint_descriptor *in_desc;
- struct usb_endpoint_descriptor *out_desc;
/* REVISIT avoid this CDC-ACM support harder ... */
struct usb_cdc_line_coding port_line_coding; /* 9600-8-N-1 etc */
@@ -51,16 +56,15 @@ struct gserial {
struct usb_request *gs_alloc_req(struct usb_ep *ep, unsigned len);
void gs_free_req(struct usb_ep *, struct usb_request *req);
-/* port setup/teardown is handled by gadget driver */
-int gserial_setup(struct usb_gadget *g, unsigned n_ports);
-void gserial_cleanup(void);
+/* management of individual TTY ports */
+int gserial_alloc_line(unsigned char *port_line);
+void gserial_free_line(unsigned char port_line);
/* connect/disconnect is handled by individual functions */
int gserial_connect(struct gserial *, u8 port_num);
void gserial_disconnect(struct gserial *);
/* functions are bound to configurations by a config or gadget driver */
-int acm_bind_config(struct usb_configuration *c, u8 port_num);
int gser_bind_config(struct usb_configuration *c, u8 port_num);
int obex_bind_config(struct usb_configuration *c, u8 port_num);
diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c
new file mode 100644
index 0000000..fc931aa
--- /dev/null
+++ b/drivers/usb/gadget/udc-core.c
@@ -0,0 +1,357 @@
+/**
+ * udc.c - Core UDC Framework
+ *
+ * Copyright (C) 2010 Texas Instruments
+ * Author: Felipe Balbi <balbi@ti.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 of
+ * the License as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#define VERBOSE_DEBUG
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <usb/ch9.h>
+#include <usb/gadget.h>
+
+/**
+ * struct usb_udc - describes one usb device controller
+ * @driver - the gadget driver pointer. For use by the class code
+ * @dev - the child device to the actual controller
+ * @gadget - the gadget. For use by the class code
+ * @list - for use by the udc class driver
+ *
+ * This represents the internal data structure which is used by the UDC-class
+ * to hold information about udc driver and gadget together.
+ */
+struct usb_udc {
+ struct usb_gadget_driver *driver;
+ struct usb_gadget *gadget;
+ struct device_d dev;
+ struct list_head list;
+};
+
+static LIST_HEAD(udc_list);
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_HAS_DMA
+
+int usb_gadget_map_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in)
+{
+ if (req->length == 0)
+ return 0;
+
+ if (req->num_sgs) {
+ int mapped;
+
+ mapped = dma_map_sg(&gadget->dev, req->sg, req->num_sgs,
+ is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ if (mapped == 0) {
+ dev_err(&gadget->dev, "failed to map SGs\n");
+ return -EFAULT;
+ }
+
+ req->num_mapped_sgs = mapped;
+ } else {
+ req->dma = dma_map_single(&gadget->dev, req->buf, req->length,
+ is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ if (dma_mapping_error(&gadget->dev, req->dma)) {
+ dev_err(&gadget->dev, "failed to map buffer\n");
+ return -EFAULT;
+ }
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_map_request);
+
+void usb_gadget_unmap_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in)
+{
+ if (req->length == 0)
+ return;
+
+ if (req->num_mapped_sgs) {
+ dma_unmap_sg(&gadget->dev, req->sg, req->num_mapped_sgs,
+ is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+
+ req->num_mapped_sgs = 0;
+ } else {
+ dma_unmap_single(&gadget->dev, req->dma, req->length,
+ is_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE);
+ }
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unmap_request);
+
+#endif /* CONFIG_HAS_DMA */
+
+/* ------------------------------------------------------------------------- */
+
+void usb_gadget_set_state(struct usb_gadget *gadget,
+ enum usb_device_state state)
+{
+ gadget->state = state;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_set_state);
+
+/* ------------------------------------------------------------------------- */
+
+/**
+ * usb_gadget_udc_start - tells usb device controller to start up
+ * @gadget: The gadget we want to get started
+ * @driver: The driver we want to bind to @gadget
+ *
+ * This call is issued by the UDC Class driver when it's about
+ * to register a gadget driver to the device controller, before
+ * calling gadget driver's bind() method.
+ *
+ * It allows the controller to be powered off until strictly
+ * necessary to have it powered on.
+ *
+ * Returns zero on success, else negative errno.
+ */
+static inline int usb_gadget_udc_start(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ return gadget->ops->udc_start(gadget, driver);
+}
+
+/**
+ * usb_gadget_udc_stop - tells usb device controller we don't need it anymore
+ * @gadget: The device we want to stop activity
+ * @driver: The driver to unbind from @gadget
+ *
+ * This call is issued by the UDC Class driver after calling
+ * gadget driver's unbind() method.
+ *
+ * The details are implementation specific, but it can go as
+ * far as powering off UDC completely and disable its data
+ * line pullups.
+ */
+static inline void usb_gadget_udc_stop(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver)
+{
+ gadget->ops->udc_stop(gadget, driver);
+}
+
+/**
+ * usb_add_gadget_udc_release - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller driver's
+ * device.
+ * @gadget: the gadget to be added to the list.
+ * @release: a gadget release function.
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc_release(struct device_d *parent, struct usb_gadget *gadget,
+ void (*release)(struct device_d *dev))
+{
+ struct usb_udc *udc;
+ int ret = -ENOMEM;
+
+ udc = kzalloc(sizeof(*udc), GFP_KERNEL);
+ if (!udc)
+ goto err1;
+
+ strcpy(gadget->dev.name, "gadget");
+ gadget->dev.id = DEVICE_ID_DYNAMIC;
+ gadget->dev.parent = parent;
+
+ ret = register_device(&gadget->dev);
+ if (ret)
+ goto err2;
+
+ strcpy(udc->dev.name, "udc");
+ udc->dev.id = DEVICE_ID_DYNAMIC;
+
+ udc->gadget = gadget;
+
+ list_add_tail(&udc->list, &udc_list);
+
+ register_device(&udc->dev);
+
+ usb_gadget_set_state(gadget, USB_STATE_NOTATTACHED);
+
+ return 0;
+err2:
+ kfree(udc);
+
+err1:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc_release);
+
+/**
+ * usb_add_gadget_udc - adds a new gadget to the udc class driver list
+ * @parent: the parent device to this udc. Usually the controller
+ * driver's device.
+ * @gadget: the gadget to be added to the list
+ *
+ * Returns zero on success, negative errno otherwise.
+ */
+int usb_add_gadget_udc(struct device_d *parent, struct usb_gadget *gadget)
+{
+ return usb_add_gadget_udc_release(parent, gadget, NULL);
+}
+EXPORT_SYMBOL_GPL(usb_add_gadget_udc);
+
+static void usb_gadget_remove_driver(struct usb_udc *udc)
+{
+ dev_dbg(&udc->dev, "unregistering UDC driver [%s]\n",
+ udc->gadget->name);
+
+ usb_gadget_disconnect(udc->gadget);
+ udc->driver->disconnect(udc->gadget);
+ udc->driver->unbind(udc->gadget);
+ usb_gadget_udc_stop(udc->gadget, NULL);
+
+ udc->driver = NULL;
+ udc->dev.driver = NULL;
+ udc->gadget->dev.driver = NULL;
+}
+
+/**
+ * usb_del_gadget_udc - deletes @udc from udc_list
+ * @gadget: the gadget to be removed.
+ *
+ * This, will call usb_gadget_unregister_driver() if
+ * the @udc is still busy.
+ */
+void usb_del_gadget_udc(struct usb_gadget *gadget)
+{
+ struct usb_udc *udc = NULL;
+
+ list_for_each_entry(udc, &udc_list, list)
+ if (udc->gadget == gadget)
+ goto found;
+
+ dev_err(gadget->dev.parent, "gadget not registered.\n");
+
+ return;
+
+found:
+ dev_vdbg(gadget->dev.parent, "unregistering gadget\n");
+
+ list_del(&udc->list);
+
+ if (udc->driver)
+ usb_gadget_remove_driver(udc);
+
+ unregister_device(&udc->dev);
+ unregister_device(&gadget->dev);
+}
+EXPORT_SYMBOL_GPL(usb_del_gadget_udc);
+
+/* ------------------------------------------------------------------------- */
+
+static int udc_bind_to_driver(struct usb_udc *udc, struct usb_gadget_driver *driver)
+{
+ int ret;
+
+ dev_dbg(&udc->dev, "registering UDC driver [%s]\n",
+ driver->function);
+
+ udc->driver = driver;
+ udc->dev.driver = &driver->driver;
+ udc->gadget->dev.driver = &driver->driver;
+
+ ret = driver->bind(udc->gadget, driver);
+ if (ret)
+ goto err1;
+
+ ret = usb_gadget_udc_start(udc->gadget, driver);
+ if (ret) {
+ driver->unbind(udc->gadget);
+ goto err1;
+ }
+ usb_gadget_connect(udc->gadget);
+
+ return 0;
+err1:
+ if (ret != -EISNAM)
+ dev_err(&udc->dev, "failed to start %s: %d\n",
+ udc->driver->function, ret);
+ udc->driver = NULL;
+ udc->dev.driver = NULL;
+ udc->gadget->dev.driver = NULL;
+ return ret;
+}
+
+int udc_attach_driver(const char *name, struct usb_gadget_driver *driver)
+{
+ struct usb_udc *udc = NULL;
+ int ret = -ENODEV;
+
+ list_for_each_entry(udc, &udc_list, list) {
+ ret = strcmp(name, dev_name(&udc->dev));
+ if (!ret)
+ break;
+ }
+ if (ret) {
+ ret = -ENODEV;
+ goto out;
+ }
+ if (udc->driver) {
+ ret = -EBUSY;
+ goto out;
+ }
+ ret = udc_bind_to_driver(udc, driver);
+out:
+ return ret;
+}
+EXPORT_SYMBOL_GPL(udc_attach_driver);
+
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
+{
+ struct usb_udc *udc = NULL;
+ int ret;
+
+ if (!driver || !driver->bind || !driver->setup)
+ return -EINVAL;
+
+ list_for_each_entry(udc, &udc_list, list) {
+ /* For now we take the first one */
+ if (!udc->driver)
+ goto found;
+ }
+
+ pr_debug("couldn't find an available UDC\n");
+
+ return -ENODEV;
+found:
+ ret = udc_bind_to_driver(udc, driver);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_probe_driver);
+
+int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
+{
+ struct usb_udc *udc = NULL;
+ int ret = -ENODEV;
+
+ if (!driver || !driver->unbind)
+ return -EINVAL;
+
+ list_for_each_entry(udc, &udc_list, list)
+ if (udc->driver == driver) {
+ usb_gadget_remove_driver(udc);
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(usb_gadget_unregister_driver);
diff --git a/include/usb/ch9.h b/include/usb/ch9.h
index 9322363..ab5d531 100644
--- a/include/usb/ch9.h
+++ b/include/usb/ch9.h
@@ -30,10 +30,11 @@
* particular descriptor type.
*/
-#ifndef __LINUX_USB_CH9_H
-#define __LINUX_USB_CH9_H
+#ifndef _UAPI__LINUX_USB_CH9_H
+#define _UAPI__LINUX_USB_CH9_H
#include <linux/types.h> /* __u8 etc */
+#include <asm/byteorder.h> /* le16_to_cpu */
/*-------------------------------------------------------------------------*/
@@ -87,6 +88,8 @@
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
#define USB_REQ_GET_ENCRYPTION 0x0E
@@ -123,8 +126,44 @@
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define TEST_J 1
+#define TEST_K 2
+#define TEST_SE0_NAK 3
+#define TEST_PACKET 4
+#define TEST_FORCE_EN 5
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-7
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-8 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP 1
+#define USB_INTRF_STAT_FUNC_RW 2
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
/**
* struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -191,6 +230,8 @@ struct usb_ctrlrequest {
#define USB_DT_WIRE_ADAPTER 0x21
#define USB_DT_RPIPE 0x22
#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE 0x24
/* From the USB 3.0 spec */
#define USB_DT_SS_ENDPOINT_COMP 0x30
@@ -258,6 +299,8 @@ struct usb_device_descriptor {
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
+#define USB_SUBCLASS_VENDOR_SPEC 0xff
+
/*-------------------------------------------------------------------------*/
/* USB_DT_CONFIG: Configuration descriptor information.
@@ -355,6 +398,22 @@ struct usb_endpoint_descriptor {
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
/*-------------------------------------------------------------------------*/
/**
@@ -467,7 +526,7 @@ static inline int usb_endpoint_xfer_isoc(
static inline int usb_endpoint_is_bulk_in(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd));
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_in(epd);
}
/**
@@ -480,7 +539,7 @@ static inline int usb_endpoint_is_bulk_in(
static inline int usb_endpoint_is_bulk_out(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd));
+ return usb_endpoint_xfer_bulk(epd) && usb_endpoint_dir_out(epd);
}
/**
@@ -493,7 +552,7 @@ static inline int usb_endpoint_is_bulk_out(
static inline int usb_endpoint_is_int_in(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd));
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_in(epd);
}
/**
@@ -506,7 +565,7 @@ static inline int usb_endpoint_is_int_in(
static inline int usb_endpoint_is_int_out(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd));
+ return usb_endpoint_xfer_int(epd) && usb_endpoint_dir_out(epd);
}
/**
@@ -519,7 +578,7 @@ static inline int usb_endpoint_is_int_out(
static inline int usb_endpoint_is_isoc_in(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd));
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_in(epd);
}
/**
@@ -532,7 +591,24 @@ static inline int usb_endpoint_is_isoc_in(
static inline int usb_endpoint_is_isoc_out(
const struct usb_endpoint_descriptor *epd)
{
- return (usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd));
+ return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
+}
+
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return __le16_to_cpu(epd->wMaxPacketSize);
+}
+
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
}
/*-------------------------------------------------------------------------*/
@@ -544,11 +620,33 @@ struct usb_ss_ep_comp_descriptor {
__u8 bMaxBurst;
__u8 bmAttributes;
- __u16 wBytesPerInterval;
+ __le16 wBytesPerInterval;
} __attribute__ ((packed));
#define USB_DT_SS_EP_COMP_SIZE 6
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
@@ -663,6 +761,7 @@ struct usb_bos_descriptor {
__u8 bNumDeviceCaps;
} __attribute__((packed));
+#define USB_DT_BOS_SIZE 5
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
@@ -700,16 +799,61 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
__u8 bReserved;
} __attribute__((packed));
+/* USB 2.0 Extension descriptor */
#define USB_CAP_TYPE_EXT 2
struct usb_ext_cap_descriptor { /* Link Power Management */
__u8 bLength;
__u8 bDescriptorType;
__u8 bDevCapabilityType;
- __u8 bmAttributes;
+ __le32 bmAttributes;
#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
} __attribute__((packed));
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
/*-------------------------------------------------------------------------*/
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
@@ -767,10 +911,11 @@ enum usb_device_speed {
USB_SPEED_UNKNOWN = 0, /* enumerating */
USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
USB_SPEED_SUPER, /* usb 3.0 */
};
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
@@ -796,4 +941,76 @@ enum usb_device_state {
*/
};
-#endif /* __LINUX_USB_CH9_H */
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
+/**
+ * usb_speed_string() - Returns human readable-name of the speed.
+ * @speed: The speed to return human-readable name for. If it's not
+ * any of the speeds defined in usb_device_speed enum, string for
+ * USB_SPEED_UNKNOWN will be returned.
+ */
+const char *usb_speed_string(enum usb_device_speed speed);
+
+
+/**
+ * usb_state_string - Returns human readable name for the state.
+ * @state: The state to return a human-readable name for. If it's not
+ * any of the states devices in usb_device_state_string enum,
+ * the string UNKNOWN will be returned.
+ */
+const char *usb_state_string(enum usb_device_state state);
+
+#endif /* _UAPI__LINUX_USB_CH9_H */
diff --git a/include/usb/composite.h b/include/usb/composite.h
index 379927a..5b92c92 100644
--- a/include/usb/composite.h
+++ b/include/usb/composite.h
@@ -12,6 +12,10 @@
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __LINUX_USB_COMPOSITE_H
@@ -29,11 +33,25 @@
* might alternatively be packaged in individual configurations, but in
* the composite model the host can use both functions at the same time.
*/
-
+#include <init.h>
#include <usb/ch9.h>
#include <usb/gadget.h>
+#include <linux/log2.h>
+#include <linux/stringify.h>
+
+/*
+ * USB function drivers should return USB_GADGET_DELAYED_STATUS if they
+ * wish to delay the data/status stages of the control transfer till they
+ * are ready. The control transfer will then be kept from completing till
+ * all the function drivers that requested for USB_GADGET_DELAYED_STAUS
+ * invoke usb_composite_setup_continue().
+ */
+#define USB_GADGET_DELAYED_STATUS 0x7fff /* Impossibly large value */
+/* big enough to hold our biggest descriptor */
+#define USB_COMP_EP0_BUFSIZ 1024
+#define USB_MS_TO_HS_INTERVAL(x) (ilog2((x * 1000 / 125)) + 1)
struct usb_configuration;
/**
@@ -41,12 +59,16 @@ struct usb_configuration;
* @name: For diagnostics, identifies the function.
* @strings: tables of strings, keyed by identifiers assigned during bind()
* and by language IDs provided in control requests
- * @descriptors: Table of full (or low) speed descriptors, using interface and
+ * @fs_descriptors: Table of full (or low) speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at full speed (or at low speed).
* @hs_descriptors: Table of high speed descriptors, using interface and
* string identifiers assigned during @bind(). If this pointer is null,
* the function will not be available at high speed.
+ * @ss_descriptors: Table of super speed descriptors, using interface and
+ * string identifiers assigned during @bind(). If this
+ * pointer is null after initiation, the function will not
+ * be available at super speed.
* @config: assigned when @usb_add_function() is called; this is the
* configuration with which this function is associated.
* @bind: Before the gadget can register, all of its functions bind() to the
@@ -54,6 +76,8 @@ struct usb_configuration;
* in interface or class descriptors; endpoints; I/O buffers; and so on.
* @unbind: Reverses @bind; called as a side effect of unregistering the
* driver which added this function.
+ * @free_func: free the struct usb_function.
+ * @mod: (internal) points to the module that created this structure.
* @set_alt: (REQUIRED) Reconfigures altsettings; function drivers may
* initialize usb_ep.driver data at this time (when it is used).
* Note that setting an interface to its current altsetting resets
@@ -65,6 +89,10 @@ struct usb_configuration;
* @setup: Used for interface-specific control requests.
* @suspend: Notifies functions when the host stops sending USB traffic.
* @resume: Notifies functions when the host restarts USB traffic.
+ * @get_status: Returns function status as a reply to
+ * GetStatus() request when the recipient is Interface.
+ * @func_suspend: callback to be called when
+ * SetFeature(FUNCTION_SUSPEND) is reseived
*
* A single USB function uses one or more interfaces, and should in most
* cases support operation at both full and high speeds. Each function is
@@ -89,11 +117,13 @@ struct usb_configuration;
* two or more distinct instances within the same configuration, providing
* several independent logical data links to a USB host.
*/
+
struct usb_function {
const char *name;
struct usb_gadget_strings **strings;
- struct usb_descriptor_header **descriptors;
+ struct usb_descriptor_header **fs_descriptors;
struct usb_descriptor_header **hs_descriptors;
+ struct usb_descriptor_header **ss_descriptors;
struct usb_configuration *config;
@@ -108,6 +138,8 @@ struct usb_function {
struct usb_function *);
void (*unbind)(struct usb_configuration *,
struct usb_function *);
+ void (*free_func)(struct usb_function *f);
+ struct module *mod;
/* runtime state management */
int (*set_alt)(struct usb_function *,
@@ -120,9 +152,15 @@ struct usb_function {
void (*suspend)(struct usb_function *);
void (*resume)(struct usb_function *);
+ /* USB 3.0 additions */
+ int (*get_status)(struct usb_function *);
+ int (*func_suspend)(struct usb_function *,
+ u8 suspend_opt);
/* private: */
/* internals */
struct list_head list;
+ DECLARE_BITMAP(endpoints, 32);
+ const struct usb_function_instance *fi;
};
int usb_add_function(struct usb_configuration *, struct usb_function *);
@@ -132,20 +170,8 @@ int usb_function_activate(struct usb_function *);
int usb_interface_id(struct usb_configuration *, struct usb_function *);
-/**
- * ep_choose - select descriptor endpoint at current device speed
- * @g: gadget, connected and running at some speed
- * @hs: descriptor to use for high speed operation
- * @fs: descriptor to use for full or low speed operation
- */
-static inline struct usb_endpoint_descriptor *
-ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
- struct usb_endpoint_descriptor *fs)
-{
- if (gadget_is_dualspeed(g) && g->speed == USB_SPEED_HIGH)
- return hs;
- return fs;
-}
+int config_ep_by_speed(struct usb_gadget *g, struct usb_function *f,
+ struct usb_ep *_ep);
#define MAX_CONFIG_INTERFACES 16 /* arbitrary; max 255 */
@@ -156,8 +182,6 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
* and by language IDs provided in control requests.
* @descriptors: Table of descriptors preceding all function descriptors.
* Examples include OTG and vendor-specific descriptors.
- * @bind: Called from @usb_add_config() to allocate resources unique to this
- * configuration and to call @usb_add_function() for each function used.
* @unbind: Reverses @bind; called as a side effect of unregistering the
* driver which added this configuration.
* @setup: Used to delegate control requests that aren't handled by standard
@@ -165,7 +189,8 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
* @bConfigurationValue: Copied into configuration descriptor.
* @iConfiguration: Copied into configuration descriptor.
* @bmAttributes: Copied into configuration descriptor.
- * @bMaxPower: Copied into configuration descriptor.
+ * @MaxPower: Power consumtion in mA. Used to compute bMaxPower in the
+ * configuration descriptor after considering the bus speed.
* @cdev: assigned by @usb_add_config() before calling @bind(); this is
* the device associated with this configuration.
*
@@ -185,7 +210,7 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs,
* @bind() method is then used to initialize all the functions and then
* call @usb_add_function() for them.
*
- * Those functions would normally be independant of each other, but that's
+ * Those functions would normally be independent of each other, but that's
* not mandatory. CDC WMC devices are an example where functions often
* depend on other functions, with some functions subsidiary to others.
* Such interdependency may be managed in any way, so long as all of the
@@ -202,8 +227,7 @@ struct usb_configuration {
* we can't restructure things to avoid mismatching...
*/
- /* configuration management: bind/unbind */
- int (*bind)(struct usb_configuration *);
+ /* configuration management: unbind/setup */
void (*unbind)(struct usb_configuration *);
int (*setup)(struct usb_configuration *,
const struct usb_ctrlrequest *);
@@ -212,7 +236,7 @@ struct usb_configuration {
u8 bConfigurationValue;
u8 iConfiguration;
u8 bmAttributes;
- u8 bMaxPower;
+ u16 MaxPower;
struct usb_composite_dev *cdev;
@@ -221,34 +245,54 @@ struct usb_configuration {
struct list_head list;
struct list_head functions;
u8 next_interface_id;
+ unsigned superspeed:1;
unsigned highspeed:1;
unsigned fullspeed:1;
struct usb_function *interface[MAX_CONFIG_INTERFACES];
};
int usb_add_config(struct usb_composite_dev *,
+ struct usb_configuration *,
+ int (*)(struct usb_configuration *));
+
+void usb_remove_config(struct usb_composite_dev *,
struct usb_configuration *);
+/* predefined index for usb_composite_driver */
+enum {
+ USB_GADGET_MANUFACTURER_IDX = 0,
+ USB_GADGET_PRODUCT_IDX,
+ USB_GADGET_SERIAL_IDX,
+ USB_GADGET_FIRST_AVAIL_IDX,
+};
+
/**
* struct usb_composite_driver - groups configurations into a gadget
* @name: For diagnostics, identifies the driver.
* @dev: Template descriptor for the device, including default device
* identifiers.
- * @strings: tables of strings, keyed by identifiers assigned during bind()
- * and language IDs provided in control requests
+ * @strings: tables of strings, keyed by identifiers assigned during @bind
+ * and language IDs provided in control requests. Note: The first entries
+ * are predefined. The first entry that may be used is
+ * USB_GADGET_FIRST_AVAIL_IDX
+ * @max_speed: Highest speed the driver supports.
+ * @needs_serial: set to 1 if the gadget needs userspace to provide
+ * a serial number. If one is not provided, warning will be printed.
* @bind: (REQUIRED) Used to allocate resources that are shared across the
* whole device, such as string IDs, and add its configurations using
- * @usb_add_config(). This may fail by returning a negative errno
+ * @usb_add_config(). This may fail by returning a negative errno
* value; it should return zero on successful initialization.
- * @unbind: Reverses @bind(); called as a side effect of unregistering
+ * @unbind: Reverses @bind; called as a side effect of unregistering
* this driver.
+ * @disconnect: optional driver disconnect method
* @suspend: Notifies when the host stops sending USB traffic,
* after function notifications
* @resume: Notifies configuration when the host restarts USB traffic,
* before function notifications
+ * @gadget_driver: Gadget driver controlling this driver
*
* Devices default to reporting self powered operation. Devices which rely
- * on bus powered operation should report this in their @bind() method.
+ * on bus powered operation should report this in their @bind method.
*
* Before returning from @bind, various fields in the template descriptor
* may be overridden. These include the idVendor/idProduct/bcdDevice values
@@ -262,29 +306,37 @@ struct usb_composite_driver {
const char *name;
const struct usb_device_descriptor *dev;
struct usb_gadget_strings **strings;
+ enum usb_device_speed max_speed;
+ unsigned needs_serial:1;
- /* REVISIT: bind() functions can be marked __init, which
- * makes trouble for section mismatch analysis. See if
- * we can't restructure things to avoid mismatching...
- */
-
- int (*bind)(struct usb_composite_dev *);
+ int (*bind)(struct usb_composite_dev *cdev);
int (*unbind)(struct usb_composite_dev *);
+ void (*disconnect)(struct usb_composite_dev *);
+
/* global suspend hooks */
void (*suspend)(struct usb_composite_dev *);
void (*resume)(struct usb_composite_dev *);
+ struct usb_gadget_driver gadget_driver;
};
-extern int usb_composite_register(struct usb_composite_driver *);
-extern void usb_composite_unregister(struct usb_composite_driver *);
+extern int usb_composite_probe(struct usb_composite_driver *driver);
+extern void usb_composite_unregister(struct usb_composite_driver *driver);
+extern void usb_composite_setup_continue(struct usb_composite_dev *cdev);
+extern int composite_dev_prepare(struct usb_composite_driver *composite,
+ struct usb_composite_dev *cdev);
+void composite_dev_cleanup(struct usb_composite_dev *cdev);
+static inline struct usb_composite_driver *to_cdriver(
+ struct usb_gadget_driver *gdrv)
+{
+ return container_of(gdrv, struct usb_composite_driver, gadget_driver);
+}
/**
* struct usb_composite_device - represents one composite usb gadget
* @gadget: read-only, abstracts the gadget's usb peripheral controller
* @req: used for control responses; buffer is pre-allocated
- * @bufsiz: size of buffer pre-allocated in @req
* @config: the currently active configuration
*
* One of these devices is allocated and initialized before the
@@ -315,30 +367,122 @@ extern void usb_composite_unregister(struct usb_composite_driver *);
struct usb_composite_dev {
struct usb_gadget *gadget;
struct usb_request *req;
- unsigned bufsiz;
struct usb_configuration *config;
/* private: */
/* internals */
+ unsigned int suspended:1;
struct usb_device_descriptor desc;
struct list_head configs;
+ struct list_head gstrings;
struct usb_composite_driver *driver;
u8 next_string_id;
+ char *def_manufacturer;
/* the gadget driver won't enable the data pullup
* while the deactivation count is nonzero.
*/
unsigned deactivations;
+
+ /* the composite driver won't complete the control transfer's
+ * data/status stages till delayed_status is zero.
+ */
+ int delayed_status;
+
+ /* protects deactivations and delayed_status counts*/
+ spinlock_t lock;
};
extern int usb_string_id(struct usb_composite_dev *c);
+extern int usb_string_ids_tab(struct usb_composite_dev *c,
+ struct usb_string *str);
+extern struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev,
+ struct usb_gadget_strings **sp, unsigned n_strings);
+
+extern int usb_string_ids_n(struct usb_composite_dev *c, unsigned n);
+
+extern void composite_disconnect(struct usb_gadget *gadget);
+extern int composite_setup(struct usb_gadget *gadget,
+ const struct usb_ctrlrequest *ctrl);
+
+/*
+ * Some systems will need runtime overrides for the product identifiers
+ * published in the device descriptor, either numbers or strings or both.
+ * String parameters are in UTF-8 (superset of ASCII's 7 bit characters).
+ */
+struct usb_composite_overwrite {
+ u16 idVendor;
+ u16 idProduct;
+ u16 bcdDevice;
+ char *serial_number;
+ char *manufacturer;
+ char *product;
+};
+
+void usb_composite_overwrite_options(struct usb_composite_dev *cdev,
+ struct usb_composite_overwrite *covr);
+
+static inline u16 get_default_bcdDevice(void)
+{
+ /* The Kernel version the current USB code is based on */
+ return 0x0316;
+}
+
+struct usb_function_driver {
+ const char *name;
+ struct module *mod;
+ struct list_head list;
+ struct usb_function_instance *(*alloc_inst)(void);
+ struct usb_function *(*alloc_func)(struct usb_function_instance *inst);
+};
+
+struct usb_function_instance {
+ struct list_head cfs_list;
+ struct usb_function_driver *fd;
+ int (*set_inst_name)(struct usb_function_instance *inst,
+ const char *name);
+ void (*free_func_inst)(struct usb_function_instance *inst);
+};
+
+void usb_function_unregister(struct usb_function_driver *f);
+int usb_function_register(struct usb_function_driver *newf);
+void usb_put_function_instance(struct usb_function_instance *fi);
+void usb_put_function(struct usb_function *f);
+struct usb_function_instance *usb_get_function_instance(const char *name);
+struct usb_function *usb_get_function(struct usb_function_instance *fi);
+
+struct usb_configuration *usb_get_config(struct usb_composite_dev *cdev,
+ int val);
+int usb_add_config_only(struct usb_composite_dev *cdev,
+ struct usb_configuration *config);
+void usb_remove_function(struct usb_configuration *c, struct usb_function *f);
+
+#define DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static struct usb_function_driver _name ## usb_func = { \
+ .name = __stringify(_name), \
+ .alloc_inst = _inst_alloc, \
+ .alloc_func = _func_alloc, \
+ };
+
+#define DECLARE_USB_FUNCTION_INIT(_name, _inst_alloc, _func_alloc) \
+ DECLARE_USB_FUNCTION(_name, _inst_alloc, _func_alloc) \
+ static int _name ## mod_init(void) \
+ { \
+ return usb_function_register(&_name ## usb_func); \
+ } \
+ device_initcall(_name ## mod_init)
/* messaging utils */
-#define DBG(d, fmt, args...)
-#define VDBG(d, fmt, args...)
-#define ERROR(d, fmt, args...)
-#define WARNING(d, fmt, args...)
-#define INFO(d, fmt, args...)
+#define DBG(d, fmt, args...) \
+ dev_dbg(&(d)->gadget->dev , fmt , ## args)
+#define VDBG(d, fmt, args...) \
+ dev_vdbg(&(d)->gadget->dev , fmt , ## args)
+#define ERROR(d, fmt, args...) \
+ dev_err(&(d)->gadget->dev , fmt , ## args)
+#define WARNING(d, fmt, args...) \
+ dev_warn(&(d)->gadget->dev , fmt , ## args)
+#define INFO(d, fmt, args...) \
+ dev_info(&(d)->gadget->dev , fmt , ## args)
#endif /* __LINUX_USB_COMPOSITE_H */
diff --git a/include/usb/gadget.h b/include/usb/gadget.h
index 798b51b..8fd8b01 100644
--- a/include/usb/gadget.h
+++ b/include/usb/gadget.h
@@ -15,10 +15,10 @@
#ifndef __LINUX_USB_GADGET_H
#define __LINUX_USB_GADGET_H
-#include <usb/ch9.h>
#include <malloc.h>
-#include <errno.h>
+#include <driver.h>
#include <linux/list.h>
+#include <usb/ch9.h>
struct usb_ep;
@@ -29,7 +29,11 @@ struct usb_ep;
* @dma: DMA address corresponding to 'buf'. If you don't set this
* field, and the usb controller needs one, it is responsible
* for mapping and unmapping the buffer.
+ * @sg: a scatterlist for SG-capable controllers.
+ * @num_sgs: number of SG entries
+ * @num_mapped_sgs: number of SG entries mapped to DMA (internal)
* @length: Length of that data
+ * @stream_id: The stream id, when USB3.0 bulk streams are being used
* @no_interrupt: If true, hints that no completion irq is needed.
* Helpful sometimes with deep request queues that are handled
* directly by DMA controllers.
@@ -75,7 +79,7 @@ struct usb_ep;
* Bulk endpoints can use any size buffers, and can also be used for interrupt
* transfers. interrupt-only endpoints can be much less functional.
*
- * NOTE: this is analagous to 'struct urb' on the host side, except that
+ * NOTE: this is analogous to 'struct urb' on the host side, except that
* it's thinner and promotes more pre-allocation.
*/
@@ -84,6 +88,11 @@ struct usb_request {
unsigned length;
dma_addr_t dma;
+ struct scatterlist *sg;
+ unsigned num_sgs;
+ unsigned num_mapped_sgs;
+
+ unsigned stream_id:16;
unsigned no_interrupt:1;
unsigned zero:1;
unsigned short_not_ok:1;
@@ -132,8 +141,20 @@ struct usb_ep_ops {
* @maxpacket:The maximum packet size used on this endpoint. The initial
* value can sometimes be reduced (hardware allowing), according to
* the endpoint descriptor used to configure the endpoint.
- * @driver_data:for use by the gadget driver. all other fields are
- * read-only to gadget drivers.
+ * @maxpacket_limit:The maximum packet size value which can be handled by this
+ * endpoint. It's set once by UDC driver when endpoint is initialized, and
+ * should not be changed. Should not be confused with maxpacket.
+ * @max_streams: The maximum number of streams supported
+ * by this EP (0 - 16, actual number is 2^n)
+ * @mult: multiplier, 'mult' value for SS Isoc EPs
+ * @maxburst: the maximum number of bursts supported by this EP (for usb3)
+ * @driver_data:for use by the gadget driver.
+ * @address: used to identify the endpoint when finding descriptor that
+ * matches connection speed
+ * @desc: endpoint descriptor. This pointer is set before the endpoint is
+ * enabled and remains valid until the endpoint is disabled.
+ * @comp_desc: In case of SuperSpeed support, this is the endpoint companion
+ * descriptor that is used to configure the endpoint
*
* the bus controller driver lists all the general purpose endpoints in
* gadget->ep_list. the control endpoint (gadget->ep0) is not in that list,
@@ -146,19 +167,38 @@ struct usb_ep {
const struct usb_ep_ops *ops;
struct list_head ep_list;
unsigned maxpacket:16;
+ unsigned maxpacket_limit:16;
+ unsigned max_streams:16;
+ unsigned mult:2;
+ unsigned maxburst:5;
+ u8 address;
+ const struct usb_endpoint_descriptor *desc;
+ const struct usb_ss_ep_comp_descriptor *comp_desc;
};
/*-------------------------------------------------------------------------*/
/**
+ * usb_ep_set_maxpacket_limit - set maximum packet size limit for endpoint
+ * @ep:the endpoint being configured
+ * @maxpacket_limit:value of maximum packet size limit
+ *
+ * This function shoud be used only in UDC drivers to initialize endpoint
+ * (usually in probe function).
+ */
+static inline void usb_ep_set_maxpacket_limit(struct usb_ep *ep,
+ unsigned maxpacket_limit)
+{
+ ep->maxpacket_limit = maxpacket_limit;
+ ep->maxpacket = maxpacket_limit;
+}
+
+/**
* usb_ep_enable - configure endpoint, making it usable
* @ep:the endpoint being configured. may not be the endpoint named "ep0".
* drivers discover endpoints through the ep_list of a usb_gadget.
- * @desc:descriptor for desired behavior. caller guarantees this pointer
- * remains valid until the endpoint is disabled; the data byte order
- * is little-endian (usb-standard).
*
- * when configurations are set, or when interface settings change, the driver
+ * When configurations are set, or when interface settings change, the driver
* will enable or disable the relevant endpoints. while it is enabled, an
* endpoint may be used for i/o until the driver receives a disconnect() from
* the host or until the endpoint is disabled.
@@ -173,10 +213,9 @@ struct usb_ep {
*
* returns zero, or a negative error code.
*/
-static inline int usb_ep_enable(struct usb_ep *ep,
- const struct usb_endpoint_descriptor *desc)
+static inline int usb_ep_enable(struct usb_ep *ep)
{
- return ep->ops->enable(ep, desc);
+ return ep->ops->enable(ep, ep->desc);
}
/**
@@ -199,6 +238,7 @@ static inline int usb_ep_disable(struct usb_ep *ep)
/**
* usb_ep_alloc_request - allocate a request object to use with this endpoint
* @ep:the endpoint to be used with with the request
+ * @gfp_flags:GFP_* flags to use
*
* Request objects must be allocated with this call, since they normally
* need controller-specific setup and may even need endpoint-specific
@@ -233,6 +273,8 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
* usb_ep_queue - queues (submits) an I/O request to an endpoint.
* @ep:the endpoint associated with the request
* @req:the request being submitted
+ * @gfp_flags: GFP_* flags to use in case the lower level driver couldn't
+ * pre-allocate all necessary memory with the request.
*
* This tells the device controller to perform the specified request through
* that endpoint (reading or writing a buffer). When the request completes,
@@ -266,7 +308,7 @@ static inline void usb_ep_free_request(struct usb_ep *ep,
*
* Control endpoints ... after getting a setup() callback, the driver queues
* one response (even if it would be zero length). That enables the
- * status ack, after transfering data as specified in the response. Setup
+ * status ack, after transferring data as specified in the response. Setup
* functions may return negative error codes to generate protocol stalls.
* (Note that some USB device controllers disallow protocol stall responses
* in some cases.) When control responses are deferred (the response is
@@ -413,7 +455,16 @@ static inline void usb_ep_fifo_flush(struct usb_ep *ep)
/*-------------------------------------------------------------------------*/
+struct usb_dcd_config_params {
+ __u8 bU1devExitLat; /* U1 Device exit Latency */
+#define USB_DEFAULT_U1_DEV_EXIT_LAT 0x01 /* Less then 1 microsec */
+ __le16 bU2DevExitLat; /* U2 Device exit Latency */
+#define USB_DEFAULT_U2_DEV_EXIT_LAT 0x1F4 /* Less then 500 microsec */
+};
+
+
struct usb_gadget;
+struct usb_gadget_driver;
/* the rest of the api to the controller hardware: device operations,
* which don't involve endpoints (or i/o).
@@ -427,17 +478,30 @@ struct usb_gadget_ops {
int (*pullup) (struct usb_gadget *, int is_on);
int (*ioctl)(struct usb_gadget *,
unsigned code, unsigned long param);
+ void (*get_config_params)(struct usb_dcd_config_params *);
+ int (*udc_start)(struct usb_gadget *,
+ struct usb_gadget_driver *);
+ int (*udc_stop)(struct usb_gadget *,
+ struct usb_gadget_driver *);
};
/**
* struct usb_gadget - represents a usb slave device
+ * @work: (internal use) Workqueue to be used for sysfs_notify()
* @ops: Function pointers used to access hardware-specific operations.
* @ep0: Endpoint zero, used when reading or writing responses to
* driver setup() requests
* @ep_list: List of other endpoints supported by the device.
* @speed: Speed of current connection to USB host.
- * @is_dualspeed: True if the controller supports both high and full speed
- * operation. If it does, the gadget driver must also support both.
+ * @max_speed: Maximal speed the UDC can handle. UDC must support this
+ * and all slower speeds.
+ * @state: the state we are now (attached, suspended, configured, etc)
+ * @name: Identifies the controller hardware type. Used in diagnostics
+ * and sometimes configuration.
+ * @dev: Driver model state for this abstract device.
+ * @out_epnum: last used out ep number
+ * @in_epnum: last used in ep number
+ * @sg_supported: true if we can handle scatter-gather
* @is_otg: True if the USB device port uses a Mini-AB jack, so that the
* gadget driver must provide a USB OTG descriptor.
* @is_a_peripheral: False unless is_otg, the "A" end of a USB cable
@@ -449,9 +513,8 @@ struct usb_gadget_ops {
* only supports HNP on a different root port.
* @b_hnp_enable: OTG device feature flag, indicating that the A-Host
* enabled HNP support.
- * @name: Identifies the controller hardware type. Used in diagnostics
- * and sometimes configuration.
- * @dev: Driver model state for this abstract device.
+ * @quirk_ep_out_aligned_size: epout requires buffer size to be aligned to
+ * MaxPacketSize.
*
* Gadgets have a mostly-portable "gadget driver" implementing device
* functions, handling all usb configurations and interfaces. Gadget
@@ -477,45 +540,76 @@ struct usb_gadget {
struct usb_ep *ep0;
struct list_head ep_list; /* of usb_ep */
enum usb_device_speed speed;
- unsigned is_dualspeed:1;
+ enum usb_device_speed max_speed;
+ enum usb_device_state state;
+ const char *name;
+ struct device_d dev;
+ unsigned out_epnum;
+ unsigned in_epnum;
+
+ unsigned sg_supported:1;
unsigned is_otg:1;
unsigned is_a_peripheral:1;
unsigned b_hnp_enable:1;
unsigned a_hnp_support:1;
unsigned a_alt_hnp_support:1;
- const char *name;
- void *priv;
+ unsigned quirk_ep_out_aligned_size:1;
};
+#define work_to_gadget(w) (container_of((w), struct usb_gadget, work))
static inline void set_gadget_data(struct usb_gadget *gadget, void *data)
{
- gadget->priv = data;
+ gadget->dev.priv = data;
}
static inline void *get_gadget_data(struct usb_gadget *gadget)
{
- return gadget->priv;
+ return gadget->dev.priv;
+}
+
+static inline struct usb_gadget *dev_to_usb_gadget(struct device_d *dev)
+{
+ return container_of(dev, struct usb_gadget, dev);
}
/* iterates the non-control endpoints; 'tmp' is a struct usb_ep pointer */
-#define gadget_for_each_ep(tmp,gadget) \
+#define gadget_for_each_ep(tmp, gadget) \
list_for_each_entry(tmp, &(gadget)->ep_list, ep_list)
/**
+ * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget
+ * requires quirk_ep_out_aligned_size, otherwise reguens len.
+ * @g: controller to check for quirk
+ * @ep: the endpoint whose maxpacketsize is used to align @len
+ * @len: buffer size's length to align to @ep's maxpacketsize
+ *
+ * This helper is used in case it's required for any reason to check and maybe
+ * align buffer's size to an ep's maxpacketsize.
+ */
+static inline size_t
+usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len)
+{
+ return !g->quirk_ep_out_aligned_size ? len :
+ round_up(len, (size_t)ep->desc->wMaxPacketSize);
+}
+
+/**
* gadget_is_dualspeed - return true iff the hardware handles high speed
* @g: controller that might support both high and full speeds
*/
static inline int gadget_is_dualspeed(struct usb_gadget *g)
{
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- /* runtime test would check "g->is_dualspeed" ... that might be
- * useful to work around hardware bugs, but is mostly pointless
- */
- return 1;
-#else
- return 0;
-#endif
+ return g->max_speed >= USB_SPEED_HIGH;
+}
+
+/**
+ * gadget_is_superspeed() - return true if the hardware handles superspeed
+ * @g: controller that might support superspeed
+ */
+static inline int gadget_is_superspeed(struct usb_gadget *g)
+{
+ return g->max_speed >= USB_SPEED_SUPER;
}
/**
@@ -703,12 +797,7 @@ int usb_gadget_poll(void);
/**
* struct usb_gadget_driver - driver for usb 'slave' devices
* @function: String describing the gadget's function
- * @speed: Highest speed the driver handles.
- * @bind: Invoked when the driver is bound to a gadget, usually
- * after registering the driver.
- * At that point, ep0 is fully initialized, and ep_list holds
- * the currently-available endpoints.
- * Called in a context that permits sleeping.
+ * @max_speed: Highest speed the driver handles.
* @setup: Invoked for ep0 control requests that aren't handled by
* the hardware level driver. Most calls must be handled by
* the gadget driver, including descriptor and configuration
@@ -719,6 +808,7 @@ int usb_gadget_poll(void);
* when the host is disconnected. May be called in_interrupt; this
* may not sleep. Some devices can't detect disconnect, so this might
* not be called except as part of controller shutdown.
+ * @bind: the driver's bind callback
* @unbind: Invoked when the driver is unbound from a gadget,
* usually from rmmod (after a disconnect is reported).
* Called in a context that permits sleeping.
@@ -772,8 +862,9 @@ int usb_gadget_poll(void);
*/
struct usb_gadget_driver {
char *function;
- enum usb_device_speed speed;
- int (*bind)(struct usb_gadget *);
+ enum usb_device_speed max_speed;
+ int (*bind)(struct usb_gadget *gadget,
+ struct usb_gadget_driver *driver);
void (*unbind)(struct usb_gadget *);
int (*setup)(struct usb_gadget *,
const struct usb_ctrlrequest *);
@@ -782,7 +873,7 @@ struct usb_gadget_driver {
void (*resume)(struct usb_gadget *);
/* FIXME support safe rmmod */
-// struct device_driver driver;
+ struct driver_d driver;
};
@@ -797,17 +888,17 @@ struct usb_gadget_driver {
*/
/**
- * usb_gadget_register_driver - register a gadget driver
- * @driver:the driver being registered
+ * usb_gadget_probe_driver - probe a gadget driver
+ * @driver: the driver being registered
* Context: can sleep
*
* Call this in your gadget driver's module initialization function,
* to tell the underlying usb controller driver about your driver.
- * The driver's bind() function will be called to bind it to a
- * gadget before this registration call returns. It's expected that
- * the bind() functions will be in init sections.
+ * The @bind() function will be called to bind it to a gadget before this
+ * registration call returns. It's expected that the @bind() function will
+ * be in init sections.
*/
-int usb_gadget_register_driver(struct usb_gadget_driver *driver);
+int usb_gadget_probe_driver(struct usb_gadget_driver *driver);
/**
* usb_gadget_unregister_driver - unregister a gadget driver
@@ -824,6 +915,13 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver);
*/
int usb_gadget_unregister_driver(struct usb_gadget_driver *driver);
+extern int usb_add_gadget_udc_release(struct device_d *parent,
+ struct usb_gadget *gadget, void (*release)(struct device_d *dev));
+extern int usb_add_gadget_udc(struct device_d *parent, struct usb_gadget *gadget);
+extern void usb_del_gadget_udc(struct usb_gadget *gadget);
+extern int udc_attach_driver(const char *name,
+ struct usb_gadget_driver *driver);
+
/*-------------------------------------------------------------------------*/
/* utility to simplify dealing with string descriptors */
@@ -854,6 +952,11 @@ struct usb_gadget_strings {
struct usb_string *strings;
};
+struct usb_gadget_string_container {
+ struct list_head list;
+ u8 *stash[0];
+};
+
/* put descriptor for string with that id into buf (buflen >= 256) */
int usb_gadget_get_string(struct usb_gadget_strings *table, int id, u8 *buf);
@@ -873,21 +976,39 @@ int usb_gadget_config_buf(const struct usb_config_descriptor *config,
struct usb_descriptor_header **usb_copy_descriptors(
struct usb_descriptor_header **);
-/* return copy of endpoint descriptor given original descriptor set */
-struct usb_endpoint_descriptor *usb_find_endpoint(
- struct usb_descriptor_header **src,
- struct usb_descriptor_header **copy,
- struct usb_endpoint_descriptor *match);
-
/**
* usb_free_descriptors - free descriptors returned by usb_copy_descriptors()
* @v: vector of descriptors
*/
static inline void usb_free_descriptors(struct usb_descriptor_header **v)
{
- free(v);
+ kfree(v);
}
+struct usb_function;
+int usb_assign_descriptors(struct usb_function *f,
+ struct usb_descriptor_header **fs,
+ struct usb_descriptor_header **hs,
+ struct usb_descriptor_header **ss);
+void usb_free_all_descriptors(struct usb_function *f);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to simplify map/unmap of usb_requests to/from DMA */
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+/*-------------------------------------------------------------------------*/
+
+/* utility to set gadget state properly */
+
+extern void usb_gadget_set_state(struct usb_gadget *gadget,
+ enum usb_device_state state);
+
/*-------------------------------------------------------------------------*/
/* utility wrapping a simple endpoint selection policy */
@@ -895,6 +1016,11 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v)
extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
struct usb_endpoint_descriptor *);
+
+extern struct usb_ep *usb_ep_autoconfig_ss(struct usb_gadget *,
+ struct usb_endpoint_descriptor *,
+ struct usb_ss_ep_comp_descriptor *);
+
extern void usb_ep_autoconfig_reset(struct usb_gadget *);
#endif /* __LINUX_USB_GADGET_H */
diff --git a/include/usb/usbserial.h b/include/usb/usbserial.h
index 7c416aa..e047ca7 100644
--- a/include/usb/usbserial.h
+++ b/include/usb/usbserial.h
@@ -6,14 +6,10 @@ struct usb_serial_pdata {
const char *productname;
u16 idVendor;
u16 idProduct;
- int mode;
+ bool acm;
};
int usb_serial_register(struct usb_serial_pdata *pdata);
void usb_serial_unregister(void);
-/* OBEX support is missing in barebox */
-/* #define HAVE_OBEX */
-
#endif /* _USB_SERIAL_H */
-
--
2.0.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 26+ messages in thread