mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [PATCH v3 1/2] i2c: add Marvell 64xxx driver
Date: Tue, 29 Jul 2014 16:47:16 +0400	[thread overview]
Message-ID: <1406638037-23026-2-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1406638037-23026-1-git-send-email-antonynpavlov@gmail.com>

This driver is also used for Allwinner SoCs I2C controllers.

Ported from linux-3.15.

The most notable barebox driver version changes:

  * drop platform device stuff;
  * drop "allwinner,sun*" stuff;
  * drop message offloading support;
  * add reg-io-width devicetree parameter to use driver
    with byte-oriented controller versions.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
 drivers/i2c/busses/Kconfig       |   8 +
 drivers/i2c/busses/Makefile      |   1 +
 drivers/i2c/busses/i2c-mv64xxx.c | 647 +++++++++++++++++++++++++++++++++++++++
 3 files changed, 656 insertions(+)

diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 370abb0..851556f 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -16,6 +16,14 @@ config I2C_IMX
 	bool "MPC85xx/i.MX I2C Master driver"
 	depends on (ARCH_IMX && !ARCH_IMX1) || ARCH_MPC85XX
 
+config I2C_MV64XXX
+	bool "Marvell mv64xxx I2C Controller"
+	depends on HAVE_CLK && OFDEVICE
+	help
+	  If you say yes to this option, support will be included for the
+	  built-in I2C interface on the Marvell 64xxx line of host bridges.
+	  This driver is also used for Allwinner SoCs I2C controllers.
+
 config I2C_OMAP
 	bool "OMAP I2C Master driver"
 	depends on ARCH_OMAP
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 9823d1b..4e4f6ba 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_IMX) += i2c-imx.o
+obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
 obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
new file mode 100644
index 0000000..6d8c85b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -0,0 +1,647 @@
+/*
+ * Driver for the i2c controller on the Marvell line of host bridges
+ * (e.g, gt642[46]0, mv643[46]0, mv644[46]0, and Orion SoC family).
+ *
+ * This code was ported from linux-3.15 kernel by Antony Pavlov.
+ *
+ * Author: Mark A. Greer <mgreer@mvista.com>
+ *
+ * 2005 (c) MontaVista, Software, Inc.  This file is licensed under
+ * the terms of the GNU General Public License version 2.  This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <of.h>
+#include <malloc.h>
+#include <types.h>
+#include <xfuncs.h>
+#include <clock.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <io.h>
+#include <i2c/i2c.h>
+
+#define ADDR_ADDR(val)			((val & 0x7f) << 1)
+#define BAUD_DIV_N(val)			(val & 0x7)
+#define BAUD_DIV_M(val)			((val & 0xf) << 3)
+
+#define	REG_CONTROL_ACK				0x00000004
+#define	REG_CONTROL_IFLG			0x00000008
+#define	REG_CONTROL_STOP			0x00000010
+#define	REG_CONTROL_START			0x00000020
+#define	REG_CONTROL_TWSIEN			0x00000040
+#define	REG_CONTROL_INTEN			0x00000080
+
+/* Ctlr status values */
+#define	STATUS_MAST_START			0x08
+#define	STATUS_MAST_REPEAT_START		0x10
+#define	STATUS_MAST_WR_ADDR_ACK			0x18
+#define	STATUS_MAST_WR_ADDR_NO_ACK		0x20
+#define	STATUS_MAST_WR_ACK			0x28
+#define	STATUS_MAST_WR_NO_ACK			0x30
+#define	STATUS_MAST_RD_ADDR_ACK			0x40
+#define	STATUS_MAST_RD_ADDR_NO_ACK		0x48
+#define	STATUS_MAST_RD_DATA_ACK			0x50
+#define	STATUS_MAST_RD_DATA_NO_ACK		0x58
+#define	STATUS_MAST_WR_ADDR_2_ACK		0xd0
+#define	STATUS_MAST_RD_ADDR_2_ACK		0xe0
+
+/* Driver states */
+enum mv64xxx_state {
+	STATE_INVALID,
+	STATE_IDLE,
+	STATE_WAITING_FOR_START_COND,
+	STATE_WAITING_FOR_RESTART,
+	STATE_WAITING_FOR_ADDR_1_ACK,
+	STATE_WAITING_FOR_ADDR_2_ACK,
+	STATE_WAITING_FOR_SLAVE_ACK,
+	STATE_WAITING_FOR_SLAVE_DATA,
+};
+
+/* Driver actions */
+enum mv64xxx_action {
+	ACTION_INVALID,
+	ACTION_CONTINUE,
+	ACTION_SEND_RESTART,
+	ACTION_OFFLOAD_RESTART,
+	ACTION_SEND_ADDR_1,
+	ACTION_SEND_ADDR_2,
+	ACTION_SEND_DATA,
+	ACTION_RCV_DATA,
+	ACTION_RCV_DATA_STOP,
+	ACTION_SEND_STOP,
+	ACTION_OFFLOAD_SEND_STOP,
+};
+
+struct mv64xxx_i2c_regs {
+	u8	addr;
+	u8	ext_addr;
+	u8	data;
+	u8	control;
+	u8	status;
+	u8	clock;
+	u8	soft_reset;
+};
+
+struct mv64xxx_i2c_data {
+	struct i2c_msg		*msgs;
+	int			num_msgs;
+	enum mv64xxx_state	state;
+	enum mv64xxx_action	action;
+	u8			cntl_bits;
+	void __iomem		*reg_base;
+	struct mv64xxx_i2c_regs	reg_offsets;
+	u8			addr1;
+	u8			addr2;
+	u8			bytes_left;
+	u8			byte_posn;
+	u8			send_stop;
+	bool			block;
+	int			rc;
+	u32			freq_m;
+	u32			freq_n;
+	struct clk              *clk;
+	struct i2c_msg		*msg;
+	struct i2c_adapter	adapter;
+/* 5us delay in order to avoid repeated start timing violation */
+	bool			errata_delay;
+	void (*write_reg)(struct mv64xxx_i2c_data *drv_data, u32 v, unsigned reg);
+	u32 (*read_reg)(struct mv64xxx_i2c_data *drv_data, unsigned reg);
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
+	.addr		= 0x00,
+	.ext_addr	= 0x10,
+	.data		= 0x04,
+	.control	= 0x08,
+	.status		= 0x0c,
+	.clock		= 0x0c,
+	.soft_reset	= 0x1c,
+};
+
+static void mv64xxx_writeb(struct mv64xxx_i2c_data *drv_data,
+				u32 v, unsigned reg)
+{
+	writeb(v, drv_data->reg_base + reg);
+}
+
+static void mv64xxx_writel(struct mv64xxx_i2c_data *drv_data,
+				u32 v, unsigned reg)
+{
+	writel(v, drv_data->reg_base + reg);
+}
+
+static inline void mv64xxx_write(struct mv64xxx_i2c_data *drv_data,
+				u32 v, unsigned reg)
+{
+	drv_data->write_reg(drv_data, v, reg);
+}
+
+static u32 mv64xxx_readb(struct mv64xxx_i2c_data *drv_data, unsigned reg)
+{
+	return readb(drv_data->reg_base + reg);
+}
+
+static u32 mv64xxx_readl(struct mv64xxx_i2c_data *drv_data, unsigned reg)
+{
+	return readl(drv_data->reg_base + reg);
+}
+
+static inline u32 mv64xxx_read(struct mv64xxx_i2c_data *drv_data, unsigned reg)
+{
+	return drv_data->read_reg(drv_data, reg);
+}
+
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+	struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->cntl_bits = REG_CONTROL_ACK |
+		REG_CONTROL_INTEN | REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = ADDR_ADDR((u32)msg->addr) | dir;
+		drv_data->addr2 = 0;
+	}
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Finite State Machine & Interrupt Routines
+ *
+ *****************************************************************************
+ */
+
+/* Reset hardware and initialize FSM */
+static void
+mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
+{
+	mv64xxx_write(drv_data, 0, drv_data->reg_offsets.soft_reset);
+	mv64xxx_write(drv_data, BAUD_DIV_M(drv_data->freq_m)
+		| BAUD_DIV_N(drv_data->freq_n),
+		drv_data->reg_offsets.clock);
+	mv64xxx_write(drv_data, 0, drv_data->reg_offsets.addr);
+	mv64xxx_write(drv_data, 0, drv_data->reg_offsets.ext_addr);
+	mv64xxx_write(drv_data, REG_CONTROL_TWSIEN
+		| REG_CONTROL_STOP,
+		drv_data->reg_offsets.control);
+	drv_data->state = STATE_IDLE;
+}
+
+static void
+mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
+{
+	/*
+	 * If state is idle, then this is likely the remnants of an old
+	 * operation that driver has given up on or the user has killed.
+	 * If so, issue the stop condition and go to idle.
+	 */
+	if (drv_data->state == STATE_IDLE) {
+		drv_data->action = ACTION_SEND_STOP;
+		return;
+	}
+
+	/* The status from the ctlr [mostly] tells us what to do next */
+	switch (status) {
+	/* Start condition interrupt */
+	case STATUS_MAST_START: /* 0x08 */
+	case STATUS_MAST_REPEAT_START: /* 0x10 */
+		drv_data->action = ACTION_SEND_ADDR_1;
+		drv_data->state = STATE_WAITING_FOR_ADDR_1_ACK;
+		break;
+
+	/* Performing a write */
+	case STATUS_MAST_WR_ADDR_ACK: /* 0x18 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = ACTION_SEND_ADDR_2;
+			drv_data->state =
+				STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */
+	case STATUS_MAST_WR_ACK: /* 0x28 */
+		if (drv_data->bytes_left == 0) {
+			if (drv_data->send_stop) {
+				drv_data->action = ACTION_SEND_STOP;
+				drv_data->state = STATE_IDLE;
+			} else {
+				drv_data->action =
+					ACTION_SEND_RESTART;
+				drv_data->state =
+					STATE_WAITING_FOR_RESTART;
+			}
+		} else {
+			drv_data->action = ACTION_SEND_DATA;
+			drv_data->state =
+				STATE_WAITING_FOR_SLAVE_ACK;
+			drv_data->bytes_left--;
+		}
+		break;
+
+	/* Performing a read */
+	case STATUS_MAST_RD_ADDR_ACK: /* 40 */
+		if (drv_data->msg->flags & I2C_M_TEN) {
+			drv_data->action = ACTION_SEND_ADDR_2;
+			drv_data->state =
+				STATE_WAITING_FOR_ADDR_2_ACK;
+			break;
+		}
+		/* FALLTHRU */
+	case STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */
+		if (drv_data->bytes_left == 0) {
+			drv_data->action = ACTION_SEND_STOP;
+			drv_data->state = STATE_IDLE;
+			break;
+		}
+		/* FALLTHRU */
+	case STATUS_MAST_RD_DATA_ACK: /* 0x50 */
+		if (status != STATUS_MAST_RD_DATA_ACK)
+			drv_data->action = ACTION_CONTINUE;
+		else {
+			drv_data->action = ACTION_RCV_DATA;
+			drv_data->bytes_left--;
+		}
+		drv_data->state = STATE_WAITING_FOR_SLAVE_DATA;
+
+		if (drv_data->bytes_left == 1)
+			drv_data->cntl_bits &= ~REG_CONTROL_ACK;
+		break;
+
+	case STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */
+		drv_data->action = ACTION_RCV_DATA_STOP;
+		drv_data->state = STATE_IDLE;
+		break;
+
+	case STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */
+	case STATUS_MAST_WR_NO_ACK: /* 30 */
+	case STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */
+		/* Doesn't seem to be a device at other end */
+		drv_data->action = ACTION_SEND_STOP;
+		drv_data->state = STATE_IDLE;
+		drv_data->rc = -ENXIO;
+		break;
+
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, "
+			"status: 0x%x, addr: 0x%x, flags: 0x%x\n",
+			 drv_data->state, status, drv_data->msg->addr,
+			 drv_data->msg->flags);
+		drv_data->action = ACTION_SEND_STOP;
+		mv64xxx_i2c_hw_init(drv_data);
+		drv_data->rc = -EIO;
+	}
+}
+
+static void mv64xxx_i2c_send_start(struct mv64xxx_i2c_data *drv_data)
+{
+	drv_data->msg = drv_data->msgs;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = drv_data->msg->len;
+	drv_data->rc = 0;
+
+	mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+	mv64xxx_write(drv_data, drv_data->cntl_bits | REG_CONTROL_START,
+		drv_data->reg_offsets.control);
+}
+
+static void
+mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
+{
+	switch (drv_data->action) {
+	case ACTION_SEND_RESTART:
+		/* We should only get here if we have further messages */
+		BUG_ON(drv_data->num_msgs == 0);
+
+		drv_data->msgs++;
+		drv_data->num_msgs--;
+		mv64xxx_i2c_send_start(drv_data);
+
+		if (drv_data->errata_delay)
+			udelay(5);
+
+		/*
+		 * We're never at the start of the message here, and by this
+		 * time it's already too late to do any protocol mangling.
+		 * Thankfully, do not advertise support for that feature.
+		 */
+		drv_data->send_stop = drv_data->num_msgs == 1;
+		break;
+
+	case ACTION_CONTINUE:
+		mv64xxx_write(drv_data, drv_data->cntl_bits,
+			drv_data->reg_offsets.control);
+		break;
+
+	case ACTION_SEND_ADDR_1:
+		mv64xxx_write(drv_data, drv_data->addr1,
+			drv_data->reg_offsets.data);
+		mv64xxx_write(drv_data, drv_data->cntl_bits,
+			drv_data->reg_offsets.control);
+		break;
+
+	case ACTION_SEND_ADDR_2:
+		mv64xxx_write(drv_data, drv_data->addr2,
+			drv_data->reg_offsets.data);
+		mv64xxx_write(drv_data, drv_data->cntl_bits,
+			drv_data->reg_offsets.control);
+		break;
+
+	case ACTION_SEND_DATA:
+		mv64xxx_write(drv_data, drv_data->msg->buf[drv_data->byte_posn++],
+			drv_data->reg_offsets.data);
+		mv64xxx_write(drv_data, drv_data->cntl_bits,
+			drv_data->reg_offsets.control);
+		break;
+
+	case ACTION_RCV_DATA:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			mv64xxx_read(drv_data, drv_data->reg_offsets.data);
+		mv64xxx_write(drv_data, drv_data->cntl_bits,
+			drv_data->reg_offsets.control);
+		break;
+
+	case ACTION_RCV_DATA_STOP:
+		drv_data->msg->buf[drv_data->byte_posn++] =
+			mv64xxx_read(drv_data, drv_data->reg_offsets.data);
+		drv_data->cntl_bits &= ~REG_CONTROL_INTEN;
+		mv64xxx_write(drv_data, drv_data->cntl_bits | REG_CONTROL_STOP,
+			drv_data->reg_offsets.control);
+		drv_data->block = false;
+		if (drv_data->errata_delay)
+			udelay(5);
+
+		break;
+
+	case ACTION_INVALID:
+	default:
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx_i2c_do_action: Invalid action: %d\n",
+			drv_data->action);
+		drv_data->rc = -EIO;
+
+		/* FALLTHRU */
+	case ACTION_SEND_STOP:
+		drv_data->cntl_bits &= ~REG_CONTROL_INTEN;
+		mv64xxx_write(drv_data, drv_data->cntl_bits
+			| REG_CONTROL_STOP,
+			drv_data->reg_offsets.control);
+		drv_data->block = false;
+		break;
+	}
+}
+
+static void mv64xxx_i2c_intr(struct mv64xxx_i2c_data *drv_data)
+{
+	u32 status;
+	uint64_t start;
+
+	start = get_time_ns();
+
+	while (mv64xxx_read(drv_data, drv_data->reg_offsets.control) &
+						REG_CONTROL_IFLG) {
+		status = mv64xxx_read(drv_data, drv_data->reg_offsets.status);
+		mv64xxx_i2c_fsm(drv_data, status);
+		mv64xxx_i2c_do_action(drv_data);
+
+		if (is_timeout_non_interruptible(start, 3 * SECOND)) {
+			drv_data->rc = -EIO;
+			break;
+		}
+	}
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Msg Execution Routines
+ *
+ *****************************************************************************
+ */
+static void
+mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
+{
+	do {
+		mv64xxx_i2c_intr(drv_data);
+		if (drv_data->rc) {
+			drv_data->state = STATE_IDLE;
+			dev_err(&drv_data->adapter.dev, "I2C bus error\n");
+			mv64xxx_i2c_hw_init(drv_data);
+			drv_data->block = false;
+		}
+	} while (drv_data->block);
+}
+
+/*
+ *****************************************************************************
+ *
+ *	I2C Core Support Routines (Interface to higher level I2C code)
+ *
+ *****************************************************************************
+ */
+static int
+mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
+{
+	struct mv64xxx_i2c_data *drv_data = container_of(adap, struct mv64xxx_i2c_data, adapter);
+	int ret = num;
+
+	BUG_ON(drv_data->msgs != NULL);
+
+	drv_data->msgs = msgs;
+	drv_data->num_msgs = num;
+	drv_data->state = STATE_WAITING_FOR_START_COND;
+	drv_data->send_stop = (num == 1);
+	drv_data->block = true;
+	mv64xxx_i2c_send_start(drv_data);
+	mv64xxx_i2c_wait_for_completion(drv_data);
+
+	if (drv_data->rc < 0)
+		ret = drv_data->rc;
+
+	drv_data->num_msgs = 0;
+	drv_data->msgs = NULL;
+
+	return ret;
+}
+
+/*
+ *****************************************************************************
+ *
+ *	Driver Interface & Early Init Routines
+ *
+ *****************************************************************************
+ */
+static struct of_device_id mv64xxx_i2c_of_match_table[] = {
+	{ .compatible = "marvell,mv64xxx-i2c", .data = (unsigned long)&mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-i2c", .data = (unsigned long)&mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-a0-i2c", .data = (unsigned long)&mv64xxx_i2c_regs_mv64xxx},
+	{}
+};
+
+static inline int
+mv64xxx_calc_freq(const int tclk, const int n, const int m)
+{
+	return tclk / (10 * (m + 1) * (2 << n));
+}
+
+static bool
+mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
+			  u32 *best_m)
+{
+	int freq, delta, best_delta = INT_MAX;
+	int m, n;
+
+	for (n = 0; n <= 7; n++)
+		for (m = 0; m <= 15; m++) {
+			freq = mv64xxx_calc_freq(tclk, n, m);
+			delta = req_freq - freq;
+			if (delta >= 0 && delta < best_delta) {
+				*best_m = m;
+				*best_n = n;
+				best_delta = delta;
+			}
+			if (best_delta == 0)
+				return true;
+		}
+	if (best_delta == INT_MAX)
+		return false;
+	return true;
+}
+
+static int
+mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
+		  struct device_d *pd)
+{
+	struct device_node *np = pd->device_node;
+	u32 bus_freq, tclk;
+	int rc = 0;
+	u32 prop;
+	struct mv64xxx_i2c_regs *mv64xxx_regs;
+	int freq;
+
+	if (IS_ERR(drv_data->clk)) {
+		rc = -ENODEV;
+		goto out;
+	}
+	tclk = clk_get_rate(drv_data->clk);
+
+	rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
+	if (rc)
+		bus_freq = 100000; /* 100kHz by default */
+
+	if (!mv64xxx_find_baud_factors(bus_freq, tclk,
+				       &drv_data->freq_n, &drv_data->freq_m)) {
+		rc = -EINVAL;
+		goto out;
+	}
+
+	freq = mv64xxx_calc_freq(tclk, drv_data->freq_n, drv_data->freq_m);
+	dev_dbg(pd, "tclk=%d freq_n=%d freq_m=%d freq=%d\n",
+			tclk, drv_data->freq_n, drv_data->freq_m, freq);
+
+	if (of_property_read_u32(np, "reg-io-width", &prop)) {
+		/* Use 32-bit registers by default */
+		prop = 4;
+	}
+
+	switch (prop) {
+	case 1:
+		drv_data->write_reg = mv64xxx_writeb;
+		drv_data->read_reg = mv64xxx_readb;
+		break;
+	case 4:
+		drv_data->write_reg = mv64xxx_writel;
+		drv_data->read_reg = mv64xxx_readl;
+		break;
+	default:
+		dev_err(pd, "unsupported reg-io-width (%d)\n", prop);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	dev_get_drvdata(pd, (unsigned long *)&mv64xxx_regs);
+	memcpy(&drv_data->reg_offsets, mv64xxx_regs,
+		sizeof(drv_data->reg_offsets));
+
+	/*
+	 * For controllers embedded in new SoCs activate the errata fix.
+	 */
+	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
+		drv_data->errata_delay = true;
+	}
+
+	if (of_device_is_compatible(np, "marvell,mv78230-a0-i2c")) {
+		drv_data->errata_delay = true;
+	}
+
+out:
+	return rc;
+}
+
+static int
+mv64xxx_i2c_probe(struct device_d *pd)
+{
+	struct mv64xxx_i2c_data		*drv_data;
+	int	rc;
+
+	if (!pd->device_node)
+		return -ENODEV;
+
+	drv_data = xzalloc(sizeof(*drv_data));
+
+	drv_data->reg_base = dev_request_mem_region(pd, 0);
+	if (IS_ERR(drv_data->reg_base))
+		return PTR_ERR(drv_data->reg_base);
+
+	drv_data->clk = clk_get(pd, NULL);
+	if (IS_ERR(drv_data->clk))
+		return PTR_ERR(drv_data->clk);
+
+	clk_enable(drv_data->clk);
+
+	rc = mv64xxx_of_config(drv_data, pd);
+	if (rc)
+		goto exit_clk;
+
+	drv_data->adapter.master_xfer = mv64xxx_i2c_xfer;
+	drv_data->adapter.dev.parent = pd;
+	drv_data->adapter.nr = pd->id;
+	drv_data->adapter.dev.device_node = pd->device_node;
+
+	mv64xxx_i2c_hw_init(drv_data);
+
+	rc = i2c_add_numbered_adapter(&drv_data->adapter);
+	if (rc) {
+		dev_err(pd, "Failed to add I2C adapter\n");
+		goto exit_clk;
+	}
+
+	return 0;
+
+exit_clk:
+	clk_disable(drv_data->clk);
+
+	return rc;
+}
+
+static struct driver_d mv64xxx_i2c_driver = {
+	.probe	= mv64xxx_i2c_probe,
+	.name = "mv64xxx_i2c",
+	.of_compatible = DRV_OF_COMPAT(mv64xxx_i2c_of_match_table),
+};
+device_platform_driver(mv64xxx_i2c_driver);
-- 
2.0.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2014-07-29 12:47 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-29 12:47 [PATCH v3 0/2] i2c: add Marvell 64xxx driver; fix Makefile indentation Antony Pavlov
2014-07-29 12:47 ` Antony Pavlov [this message]
2014-07-29 12:47 ` [PATCH v3 2/2] i2c: busses/Makefile: fix indentation Antony Pavlov
2014-07-30  6:35 ` [PATCH v3 0/2] i2c: add Marvell 64xxx driver; fix Makefile indentation Sascha Hauer
2014-07-30  6:37   ` Sebastian Hesselbarth
2014-07-30  8:54   ` Sebastian Hesselbarth
2014-07-31  5:56     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1406638037-23026-2-git-send-email-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox