[PATCH 0/5] mvebu: Add network support for Armada 370/XP

[Ezequiel Garcia <ezequiel.garcia@free-electrons.com>]

Here goes a new round of the support for the network controller present
on Marvell Armada 370/XP SoC.

The first patch enables the peripherals in a PUP register, which is required
on RGMII ports.

The second and third patches add support for Marvell's 88E1543 and 88E1545 PHY
chips.

The fourth patch adds the mvneta driver. Most of the configuration part is
based on Linux's mvneta driver, while some of code organization is based
on Barebox's orion-gbe driver.

The last patch adds network support in the defconfigs.

This has been tested on Armada XP GP, Armada XP Openblocks AX3 and
Armada 370 Mirabox boards. Linux zImage loads and boots fine, and the
network interfaces work from the kernel.

Ezequiel Garcia (5):
  ARM: mvebu: Enable PUP register
  net: phy: Support Marvell 88EE1545 PHY
  net: phy: Support Marvell 88EE1543 PHY
  net: Add driver for Armada 370/XP 10/100/1000 Mbps network controller
  configs: Add network options to Armada 370/XP boards

 arch/arm/configs/globalscale_mirabox_defconfig     |   4 +
 arch/arm/configs/marvell_armada_xp_gp_defconfig    |   4 +
 arch/arm/configs/plathome_openblocks_ax3_defconfig |   4 +
 arch/arm/mach-mvebu/armada-370-xp.c                |   5 +
 .../mach-mvebu/include/mach/armada-370-xp-regs.h   |   7 +
 drivers/net/Kconfig                                |   6 +
 drivers/net/Makefile                               |   1 +
 drivers/net/mvneta.c                               | 758 +++++++++++++++++++++
 drivers/net/phy/marvell.c                          |  69 ++
 9 files changed, 858 insertions(+)
 create mode 100644 drivers/net/mvneta.c

-- 
2.0.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox