From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1XXQoI-0005KZ-0F for barebox@lists.infradead.org; Fri, 26 Sep 2014 08:23:35 +0000 From: Sascha Hauer Date: Fri, 26 Sep 2014 10:22:07 +0200 Message-Id: <1411719735-30949-2-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1411719735-30949-1-git-send-email-s.hauer@pengutronix.de> References: <1411719735-30949-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 1/9] USB: add usb phy header file To: barebox@lists.infradead.org Mostly taken from the Linux Kernel to ease porting phy handling code. Signed-off-by: Sascha Hauer --- drivers/usb/core/of.c | 1 + drivers/usb/imx/chipidea-imx.c | 1 + include/usb/phy.h | 220 +++++++++++++++++++++++++++++++++++++++++ include/usb/usb.h | 9 -- 4 files changed, 222 insertions(+), 9 deletions(-) create mode 100644 include/usb/phy.h diff --git a/drivers/usb/core/of.c b/drivers/usb/core/of.c index 1ddbdaa..fd20368 100644 --- a/drivers/usb/core/of.c +++ b/drivers/usb/core/of.c @@ -16,6 +16,7 @@ #include #include +#include #include static const char *usb_dr_modes[] = { diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c index 62feae8..959f5ba 100644 --- a/drivers/usb/imx/chipidea-imx.c +++ b/drivers/usb/imx/chipidea-imx.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include diff --git a/include/usb/phy.h b/include/usb/phy.h new file mode 100644 index 0000000..057ad1c --- /dev/null +++ b/include/usb/phy.h @@ -0,0 +1,220 @@ +/* USB OTG (On The Go) defines */ +/* + * + * These APIs may be used between USB controllers. USB device drivers + * (for either host or peripheral roles) don't use these calls; they + * continue to use just usb_device and usb_gadget. + */ + +#ifndef __LINUX_USB_PHY_H +#define __LINUX_USB_PHY_H + +#include +#include +#include + +enum usb_phy_interface { + USBPHY_INTERFACE_MODE_UNKNOWN, + USBPHY_INTERFACE_MODE_UTMI, + USBPHY_INTERFACE_MODE_UTMIW, + USBPHY_INTERFACE_MODE_ULPI, + USBPHY_INTERFACE_MODE_SERIAL, + USBPHY_INTERFACE_MODE_HSIC, +}; + +enum usb_phy_events { + USB_EVENT_NONE, /* no events or cable disconnected */ + USB_EVENT_VBUS, /* vbus valid event */ + USB_EVENT_ID, /* id was grounded */ + USB_EVENT_CHARGER, /* usb dedicated charger */ + USB_EVENT_ENUMERATED, /* gadget driver enumerated */ +}; + +/* associate a type with PHY */ +enum usb_phy_type { + USB_PHY_TYPE_UNDEFINED, + USB_PHY_TYPE_USB2, + USB_PHY_TYPE_USB3, +}; + +struct usb_phy; + +/* for transceivers connected thru an ULPI interface, the user must + * provide access ops + */ +struct usb_phy_io_ops { + int (*read)(struct usb_phy *x, u32 reg); + int (*write)(struct usb_phy *x, u32 val, u32 reg); +}; + +struct usb_phy { + struct device_d *dev; + const char *label; + unsigned int flags; + + enum usb_phy_type type; + enum usb_phy_events last_event; + + struct usb_phy_io_ops *io_ops; + void __iomem *io_priv; + + /* to pass extra port status to the root hub */ + u16 port_status; + u16 port_change; + + /* to support controllers that have multiple transceivers */ + struct list_head head; + + /* initialize/shutdown the OTG controller */ + int (*init)(struct usb_phy *x); + void (*shutdown)(struct usb_phy *x); + + /* enable/disable VBUS */ + int (*set_vbus)(struct usb_phy *x, int on); + + /* effective for B devices, ignored for A-peripheral */ + int (*set_power)(struct usb_phy *x, + unsigned mA); + + /* for non-OTG B devices: set transceiver into suspend mode */ + int (*set_suspend)(struct usb_phy *x, + int suspend); + + /* + * Set wakeup enable for PHY, in that case, the PHY can be + * woken up from suspend status due to external events, + * like vbus change, dp/dm change and id. + */ + int (*set_wakeup)(struct usb_phy *x, bool enabled); + + /* notify phy connect status change */ + int (*notify_connect)(struct usb_phy *x, + enum usb_device_speed speed); + int (*notify_disconnect)(struct usb_phy *x, + enum usb_device_speed speed); +}; + +/** + * struct usb_phy_bind - represent the binding for the phy + * @dev_name: the device name of the device that will bind to the phy + * @phy_dev_name: the device name of the phy + * @index: used if a single controller uses multiple phys + * @phy: reference to the phy + * @list: to maintain a linked list of the binding information + */ +struct usb_phy_bind { + const char *dev_name; + const char *phy_dev_name; + u8 index; + struct usb_phy *phy; + struct list_head list; +}; + +/* helpers for direct access thru low-level io interface */ +static inline int usb_phy_io_read(struct usb_phy *x, u32 reg) +{ + if (x && x->io_ops && x->io_ops->read) + return x->io_ops->read(x, reg); + + return -EINVAL; +} + +static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg) +{ + if (x && x->io_ops && x->io_ops->write) + return x->io_ops->write(x, val, reg); + + return -EINVAL; +} + +static inline int +usb_phy_init(struct usb_phy *x) +{ + if (x && x->init) + return x->init(x); + + return 0; +} + +static inline void +usb_phy_shutdown(struct usb_phy *x) +{ + if (x && x->shutdown) + x->shutdown(x); +} + +static inline int +usb_phy_vbus_on(struct usb_phy *x) +{ + if (!x || !x->set_vbus) + return 0; + + return x->set_vbus(x, true); +} + +static inline int +usb_phy_vbus_off(struct usb_phy *x) +{ + if (!x || !x->set_vbus) + return 0; + + return x->set_vbus(x, false); +} + +static inline int +usb_phy_set_power(struct usb_phy *x, unsigned mA) +{ + if (x && x->set_power) + return x->set_power(x, mA); + return 0; +} + +/* Context: can sleep */ +static inline int +usb_phy_set_suspend(struct usb_phy *x, int suspend) +{ + if (x && x->set_suspend != NULL) + return x->set_suspend(x, suspend); + else + return 0; +} + +static inline int +usb_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + if (x && x->set_wakeup) + return x->set_wakeup(x, enabled); + else + return 0; +} + +static inline int +usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) +{ + if (x && x->notify_connect) + return x->notify_connect(x, speed); + else + return 0; +} + +static inline int +usb_phy_notify_disconnect(struct usb_phy *x, enum usb_device_speed speed) +{ + if (x && x->notify_disconnect) + return x->notify_disconnect(x, speed); + else + return 0; +} + +static inline const char *usb_phy_type_string(enum usb_phy_type type) +{ + switch (type) { + case USB_PHY_TYPE_USB2: + return "USB2 PHY"; + case USB_PHY_TYPE_USB3: + return "USB3 PHY"; + default: + return "UNKNOWN PHY TYPE"; + } +} +#endif /* __LINUX_USB_PHY_H */ diff --git a/include/usb/usb.h b/include/usb/usb.h index 82acf20..f02f1fb 100644 --- a/include/usb/usb.h +++ b/include/usb/usb.h @@ -440,15 +440,6 @@ enum usb_dr_mode { enum usb_phy_interface of_usb_get_phy_mode(struct device_node *np, const char *propname); -enum usb_phy_interface { - USBPHY_INTERFACE_MODE_UNKNOWN, - USBPHY_INTERFACE_MODE_UTMI, - USBPHY_INTERFACE_MODE_UTMIW, - USBPHY_INTERFACE_MODE_ULPI, - USBPHY_INTERFACE_MODE_SERIAL, - USBPHY_INTERFACE_MODE_HSIC, -}; - extern struct list_head usb_device_list; #endif /*_USB_H_ */ -- 2.1.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox