mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 06/19] pci: defer device registration until after bridge setup
Date: Sat,  4 Oct 2014 19:40:12 +0200	[thread overview]
Message-ID: <1412444425-2569-7-git-send-email-dev@lynxeye.de> (raw)
In-Reply-To: <1412444425-2569-1-git-send-email-dev@lynxeye.de>

Otherwise the drivers for a device may probe before the
devices parent bridge is fully configured, which leads
to errors when accessing the BARs.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 drivers/pci/pci.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 59f942d..943d0e8 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -208,7 +208,6 @@ static void setup_device(struct pci_dev *dev, int max_bar)
 
 	pci_write_config_byte(dev, PCI_COMMAND, cmd);
 	list_add_tail(&dev->bus_list, &dev->bus->devices);
-	pci_register_device(dev);
 }
 
 static void prescan_setup_bridge(struct pci_dev *dev)
@@ -362,6 +361,11 @@ unsigned int pci_scan_bus(struct pci_bus *bus)
 			prescan_setup_bridge(dev);
 			pci_scan_bus(child_bus);
 			postscan_setup_bridge(dev);
+			/* first activate bridge then all devices on it's bus */
+			pci_register_device(dev);
+			list_for_each_entry(dev, &child_bus->devices, bus_list)
+				if (!dev->subordinate)
+					pci_register_device(dev);
 			break;
 		default:
 		bad:
-- 
1.9.3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2014-10-04 17:34 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-04 17:40 [PATCH v2 00/19] PCI and Tegra series revamp Lucas Stach
2014-10-04 17:40 ` [PATCH v2 01/19] MIPS: malta: fix pci IO resource assignment Lucas Stach
2014-10-04 17:40 ` [PATCH v2 02/19] pci: split out device init Lucas Stach
2014-10-04 17:40 ` [PATCH v2 03/19] pci: add resource enum Lucas Stach
2014-10-04 17:40 ` [PATCH v2 04/19] pci: properly populate prefetchable BARs Lucas Stach
2014-10-04 17:40 ` [PATCH v2 05/19] pci: setup bridges and traverse buses behind them Lucas Stach
2014-10-04 17:40 ` Lucas Stach [this message]
2014-10-04 17:40 ` [PATCH v2 07/19] pci: prettyprint device names Lucas Stach
2014-10-04 17:40 ` [PATCH v2 08/19] pci: track parent<->child relationship Lucas Stach
2014-10-04 17:40 ` [PATCH v2 09/19] commands: lspci: go down into subordinate busses Lucas Stach
2014-10-04 17:40 ` [PATCH v2 10/19] clk: tegra: add PLLE setup functions Lucas Stach
2014-10-04 17:40 ` [PATCH v2 11/19] clk: tegra30: add PCIe clocks Lucas Stach
2014-10-04 17:40 ` [PATCH v2 12/19] i2c: tegra: move to fs initcall Lucas Stach
2014-10-04 17:40 ` [PATCH v2 13/19] ARM: tegra: beaver: enable PEX voltage rail Lucas Stach
2014-10-04 17:40 ` [PATCH v2 14/19] tegra: pmc: add powerdomain handling Lucas Stach
2014-10-04 17:40 ` [PATCH v2 15/19] of: import pci range parser from linux Lucas Stach
2014-10-04 17:40 ` [PATCH v2 16/19] pci: add Tegra host controller driver Lucas Stach
2014-10-04 17:40 ` [PATCH v2 17/19] ARM: tegra: advertise PCI support Lucas Stach
2014-10-04 17:40 ` [PATCH v2 18/19] net: add rtl8169 driver Lucas Stach
2014-10-04 17:40 ` [PATCH v2 19/19] ARM: tegra: enable network related options in defconfig Lucas Stach
2014-10-08  6:39 ` [PATCH v2 00/19] PCI and Tegra series revamp Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1412444425-2569-7-git-send-email-dev@lynxeye.de \
    --to=dev@lynxeye.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox