From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:6f8:1178:4:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1Y9BYR-0000rr-EH for barebox@lists.infradead.org; Thu, 08 Jan 2015 11:47:08 +0000 From: Steffen Trumtrar Date: Thu, 8 Jan 2015 12:46:21 +0100 Message-Id: <1420717584-15766-7-git-send-email-s.trumtrar@pengutronix.de> In-Reply-To: <1420717584-15766-1-git-send-email-s.trumtrar@pengutronix.de> References: <1420717584-15766-1-git-send-email-s.trumtrar@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 6/9] scripts: socfpga sequencer extraction tool To: barebox@lists.infradead.org Cc: Steffen Trumtrar From: Markus Pargmann This script extracts the socfpga sequencer from a generated u-boot automagically. The resulting changes of the barebox tree should be enough to compile with the new sequencer. Signed-off-by: Markus Pargmann Signed-off-by: Steffen Trumtrar --- Documentation/boards/socfpga.rst | 26 ++++-- scripts/socfpga_get_sequencer | 78 ++++++++++++++++ scripts/socfpga_sequencer_defines_defaults | 144 +++++++++++++++++++++++++++++ 3 files changed, 239 insertions(+), 9 deletions(-) create mode 100755 scripts/socfpga_get_sequencer create mode 100755 scripts/socfpga_sequencer_defines_defaults diff --git a/Documentation/boards/socfpga.rst b/Documentation/boards/socfpga.rst index 93831c5f290f..70f959b32570 100644 --- a/Documentation/boards/socfpga.rst +++ b/Documentation/boards/socfpga.rst @@ -45,15 +45,6 @@ handoff files. As these files are split up in the code base and generated explicitely for some specific U-boot code base, some manual work might be necessary. -The following files are generic and belong into the -`arch/arm/mach-socfpga` directory tree: - -* sequencer.c (Not for the faint of heart.) -* sequencer.h -* system.h - -It should normally not be necessary to touch these if barebox is up-to-date. - The boardspecific files for `arch/arm/boards/` are: * iocsr_config_cyclone5.c @@ -78,3 +69,20 @@ To update the handoff files, the following procedure is necessary:: 7. Click ``Ok`` than ``Generate`` 8. Copy the files generated in `software/spl_bsp/generated/` to your board folder + +The following files are generic and belong into the +`arch/arm/mach-socfpga` directory tree: + +* sdram_io.h +* sequencer.c +* sequencer.h +* sequencer_defines.h +* system.h +* tclrpt.h + +To add these files, run:: + + scripts/socfpga_get_sequencer scripts/socfpga_sequencer_defines_defaults + +where `` is the directory where the Altera bsp-editor generated the u-boot +directory. Refer to the Altera documentation for how to use the bsp-editor. diff --git a/scripts/socfpga_get_sequencer b/scripts/socfpga_get_sequencer new file mode 100755 index 000000000000..de12b35b5d11 --- /dev/null +++ b/scripts/socfpga_get_sequencer @@ -0,0 +1,78 @@ +#!/bin/bash + +if [ "$#" -lt "2" ] +then + echo "USAGE: $0 " + exit 1 +fi + +ubootsrc=$1 +sequencer_defines=$2 +bareboxsrc=. + +cd ${bareboxsrc} + +copy_source() { + local src + local tgt + src=$1 + tgt=$2 + + echo "Merging source code $src to $tgt" + + cp $src $tgt + + unifdef -f ${sequencer_defines} $tgt -o $tgt + + echo " Fixing extern/static keywords..." + # Statify all global variables with missing static keyword + sed -i 's/^\(extern \|static \|\)\([^*#\/ ][^(]* [^( ]*\((.*).*$\|=.*;.*$\)\)/static \2/g' $tgt + sed -i 's/^extern /static /g' $tgt + + echo " Translating altera int types..." + # Replace altera types + sed -i 's/alt_u32/uint32_t/g' $tgt + sed -i 's/alt_u16/uint16_t/g' $tgt + sed -i 's/alt_16/int16_t/g' $tgt + sed -i 's/alt_32/int32_t/g' $tgt + sed -i 's/alt_u8/uint8_t/g' $tgt + sed -i 's/alt_8/int8_t/g' $tgt + sed -i 's/#include "alt_types.h"//g' $tgt + + echo " Fixing include pathes..." + # Fix include pathes + sed -i 's/#include /#include /g' $tgt + sed -i 's/#include "sequencer_auto.h"//g' $tgt + + echo " Automated readability fixup..." + indent -npro -kr -i8 -ts8 -sob -l100 -ss -ncs -cp1 -il0 $tgt +} + +copy_source ${ubootsrc}/board/altera/socfpga/sdram/sequencer.c arch/arm/mach-socfpga/include/mach/sequencer.c +sed -i 's/static int sdram_calibration(void)/static int socfpga_mem_calibration(void)/g' arch/arm/mach-socfpga/include/mach/sequencer.c + +cat <<'EOF' > arch/arm/mach-socfpga/include/mach/sequencer_defines.h +#define TINIT_CNTR1_VAL 32 +#define TINIT_CNTR2_VAL 32 +#define TINIT_CNTR0_VAL 99 +#define TRESET_CNTR1_VAL 99 +#define TRESET_CNTR2_VAL 10 +#define TRESET_CNTR0_VAL 99 +EOF + +copy_source ${ubootsrc}/board/altera/socfpga/sdram/sequencer.h arch/arm/mach-socfpga/include/mach/sequencer.h +copy_source ${ubootsrc}/board/altera/socfpga/sdram/tclrpt.h arch/arm/mach-socfpga/include/mach/tclrpt.h +copy_source ${ubootsrc}/board/altera/socfpga/sdram/sdram_io.h arch/arm/mach-socfpga/include/mach/sdram_io.h +cat <<'EOF' >> arch/arm/mach-socfpga/include/mach/sdram_io.h + #define write_register(BASE, OFFSET, DATA) \ + writel(DATA, ((BASE) + (OFFSET))) + #define read_register(BASE, OFFSET) \ + readl((BASE) + (OFFSET)) + #define HPS_SDR_BASE 0xffc20000 +EOF +copy_source ${ubootsrc}/board/altera/socfpga/sdram/system.h arch/arm/mach-socfpga/include/mach/system.h + +#unifdef -f ${sequencer_defines} ${ubootsrc}/board/altera/socfpga/sdram/tclrpt.c -o arch/arm/mach-socfpga/include/mach/tclrpt.c + +echo "DONE" + diff --git a/scripts/socfpga_sequencer_defines_defaults b/scripts/socfpga_sequencer_defines_defaults new file mode 100755 index 000000000000..19b12b1142bc --- /dev/null +++ b/scripts/socfpga_sequencer_defines_defaults @@ -0,0 +1,144 @@ +/* +Copyright (c) 2012, Altera Corporation +All rights reserved. + +SPDX-License-Identifier: BSD-3-Clause + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are met: + * Redistributions of source code must retain the above copyright + notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + * Neither the name of Altera Corporation nor the + names of its contributors may be used to endorse or promote products + derived from this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +DISCLAIMED. IN NO EVENT SHALL ALTERA CORPORATION BE LIABLE FOR ANY +DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND +ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +*/ + +#define ENABLE_SWEEP_ALL_GROUPS 0 +#define ENABLE_DQSEN_SWEEP 0 +#define STATIC_QUICK_CALIBRATION 0 +#define DYNAMIC_CALIBRATION_MODE 0 +#define DISABLE_GUARANTEED_READ 0 + +#define ARRIAVGZ 0 +#define ARRIAV 0 +#define AVL_CLK_FREQ 67 +#define BFM_MODE 0 +#define BURST2 0 +#define CALIBRATE_BIT_SLIPS 0 +#define CALIB_LFIFO_OFFSET 8 +#define CALIB_VFIFO_OFFSET 6 +#define CYCLONEV 1 +#define DDR2 0 +#define DDR3 1 +#define DDRX 1 +#define DM_PINS_ENABLED 1 +#define ENABLE_ASSERT 0 +#define ENABLE_PRINTF_LOG 0 +#define ENABLE_BRINGUP_DEBUGGING 0 +#define ENABLE_DELAY_CHAIN_WRITE 0 +#define ENABLE_DQS_IN_CENTERING 1 +#define ENABLE_DQS_OUT_CENTERING 0 +#define ENABLE_EXPORT_SEQ_DEBUG_BRIDGE 0 +#define ENABLE_INST_ROM_WRITE 1 +#define ENABLE_MARGIN_REPORT_GEN 0 +#define ENABLE_NON_DESTRUCTIVE_CALIB 0 +#define ENABLE_SUPER_QUICK_CALIBRATION 0 +#define ENABLE_TCL_DEBUG 0 +#define FAKE_CAL_FAIL 0 +#define FULL_RATE 1 +#define GUARANTEED_READ_BRINGUP_TEST 0 +#define HALF_RATE 0 +#define HARD_PHY 1 +#define HARD_VFIFO 1 +#define HCX_COMPAT_MODE 0 +#define HHP_HPS_SIMULATION 0 +#define HHP_HPS_VERIFICATION 0 +#define HHP_HPS 1 +#define HPS_HW 1 +#define HR_DDIO_OUT_HAS_THREE_REGS 0 +#define IO_DELAY_PER_DCHAIN_TAP 25 +#define IO_DELAY_PER_DQS_EN_DCHAIN_TAP 25 +#define IO_DELAY_PER_OPA_TAP 312 +#define IO_DLL_CHAIN_LENGTH 8 +#define IO_DM_OUT_RESERVE 0 +#define IO_DQDQS_OUT_PHASE_MAX 0 +#define IO_DQS_EN_DELAY_MAX 31 +#define IO_DQS_EN_DELAY_OFFSET 0 +#define IO_DQS_EN_PHASE_MAX 7 +#define IO_DQS_IN_DELAY_MAX 31 +#define IO_DQS_IN_RESERVE 4 +#define IO_DQS_OUT_RESERVE 4 +#define IO_DQ_OUT_RESERVE 0 +#define IO_IO_IN_DELAY_MAX 31 +#define IO_IO_OUT1_DELAY_MAX 31 +#define IO_IO_OUT2_DELAY_MAX 0 +#define IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS 0 +#define LPDDR1 0 +#define LPDDR2 0 +#define LRDIMM 0 +#define M10_DQ_WIDTH_8 0 +#define M10_DQ_WIDTH_16 0 +#define M10_DQ_WIDTH_24 0 +#define MARGIN_VARIATION_TEST 0 +#define MAX_LATENCY_COUNT_WIDTH 5 +#define MEM_ADDR_WIDTH 13 +#define MRS_MIRROR_PING_PONG_ATSO 0 +#define MULTIPLE_AFI_WLAT 0 +#define NUM_SHADOW_REGS 1 +#define QDRII 0 +#define QUARTER_RATE 0 +#define RDIMM 0 +#define READ_AFTER_WRITE_CALIBRATION 1 +#define READ_VALID_FIFO_SIZE 16 +#define REG_FILE_INIT_SEQ_SIGNATURE 0x5555048c +#define RLDRAM3 0 +#define RLDRAMII 0 +#define RLDRAMX 0 +#define RUNTIME_CAL_REPORT 0 +#define RW_MGR_MEM_ADDRESS_MIRRORING 0 +#define RW_MGR_MEM_ADDRESS_WIDTH 15 +#define RW_MGR_MEM_BANK_WIDTH 3 +#define RW_MGR_MEM_CHIP_SELECT_WIDTH 1 +#define RW_MGR_MEM_CLK_EN_WIDTH 1 +#define RW_MGR_MEM_CONTROL_WIDTH 1 +#define RW_MGR_MEM_DATA_MASK_WIDTH 4 +#define RW_MGR_MEM_DATA_WIDTH 32 +#define RW_MGR_MEM_DQ_PER_READ_DQS 8 +#define RW_MGR_MEM_DQ_PER_WRITE_DQS 8 +#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4 +#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4 +#define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1 +#define RW_MGR_MEM_NUMBER_OF_RANKS 1 +#define RW_MGR_MEM_ODT_WIDTH 1 +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1 +#define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1 +#define RW_MGR_MR0_BL 1 +#define RW_MGR_MR0_CAS_LATENCY 3 +#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4 +#define RW_MGR_WRITE_TO_DEBUG_READ 1.0 +#define SKEW_CALIBRATION 0 +#define STATIC_FULL_CALIBRATION 1 +#define STATIC_SIM_FILESET 0 +#define STATIC_SKIP_MEM_INIT 0 +#define STRATIXV 0 +#define TRACKING_ERROR_TEST 0 +#define TRACKING_WATCH_TEST 0 +#define TW0_CAPTURE_CLOCKS 0 +#define USE_DQS_TRACKING 1 +#define USE_SHADOW_REGS 0 +#define USE_USER_RDIMM_VALUE 0 + -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox