* [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id @ 2015-01-19 9:54 Bo Shen 2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 1 reply; 9+ messages in thread From: Bo Shen @ 2015-01-19 9:54 UTC (permalink / raw) To: s.hauer, plagnioj; +Cc: barebox On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. So, let the GMAC auto detect phy id, or else hard code to 7, it can not work on these two boards. Signed-off-by: Bo Shen <voice.shen@atmel.com> --- arch/arm/boards/sama5d3xek/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c index 49d2b37..0b83147 100644 --- a/arch/arm/boards/sama5d3xek/init.c +++ b/arch/arm/boards/sama5d3xek/init.c @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} #if defined(CONFIG_DRIVER_NET_MACB) static struct macb_platform_data gmac_pdata = { .phy_interface = PHY_INTERFACE_MODE_RGMII, - .phy_addr = 7, + .phy_addr = -1, }; static struct macb_platform_data macb_pdata = { -- 2.3.0.rc0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-19 9:54 [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id Bo Shen @ 2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD 2015-01-20 0:56 ` Bo Shen 2015-01-21 15:07 ` Sascha Hauer 0 siblings, 2 replies; 9+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2015-01-19 11:39 UTC (permalink / raw) To: Bo Shen; +Cc: barebox On 17:54 Mon 19 Jan , Bo Shen wrote: > On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. > So, let the GMAC auto detect phy id, or else hard code to 7, > it can not work on these two boards. > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > --- > > arch/arm/boards/sama5d3xek/init.c | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c > index 49d2b37..0b83147 100644 > --- a/arch/arm/boards/sama5d3xek/init.c > +++ b/arch/arm/boards/sama5d3xek/init.c > @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} > #if defined(CONFIG_DRIVER_NET_MACB) > static struct macb_platform_data gmac_pdata = { > .phy_interface = PHY_INTERFACE_MODE_RGMII, > - .phy_addr = 7, > + .phy_addr = -1, IIRC the auto detect do not work on all board NACK Best Regards, J. > }; > > static struct macb_platform_data macb_pdata = { > -- > 2.3.0.rc0 > _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD @ 2015-01-20 0:56 ` Bo Shen 2015-01-21 15:07 ` Sascha Hauer 1 sibling, 0 replies; 9+ messages in thread From: Bo Shen @ 2015-01-20 0:56 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox Hi J, On 01/19/2015 07:39 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 17:54 Mon 19 Jan , Bo Shen wrote: >> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. >> So, let the GMAC auto detect phy id, or else hard code to 7, >> it can not work on these two boards. >> >> Signed-off-by: Bo Shen <voice.shen@atmel.com> >> --- >> >> arch/arm/boards/sama5d3xek/init.c | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c >> index 49d2b37..0b83147 100644 >> --- a/arch/arm/boards/sama5d3xek/init.c >> +++ b/arch/arm/boards/sama5d3xek/init.c >> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} >> #if defined(CONFIG_DRIVER_NET_MACB) >> static struct macb_platform_data gmac_pdata = { >> .phy_interface = PHY_INTERFACE_MODE_RGMII, >> - .phy_addr = 7, >> + .phy_addr = -1, > IIRC the auto detect do not work on all board On which board? Can you be more detail? Thanks. > NACK > > Best Regards, > J. >> }; >> >> static struct macb_platform_data macb_pdata = { >> -- >> 2.3.0.rc0 >> Best Regards, Bo Shen _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD 2015-01-20 0:56 ` Bo Shen @ 2015-01-21 15:07 ` Sascha Hauer 2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD 1 sibling, 1 reply; 9+ messages in thread From: Sascha Hauer @ 2015-01-21 15:07 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > On 17:54 Mon 19 Jan , Bo Shen wrote: > > On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. > > So, let the GMAC auto detect phy id, or else hard code to 7, > > it can not work on these two boards. > > > > Signed-off-by: Bo Shen <voice.shen@atmel.com> > > --- > > > > arch/arm/boards/sama5d3xek/init.c | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c > > index 49d2b37..0b83147 100644 > > --- a/arch/arm/boards/sama5d3xek/init.c > > +++ b/arch/arm/boards/sama5d3xek/init.c > > @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} > > #if defined(CONFIG_DRIVER_NET_MACB) > > static struct macb_platform_data gmac_pdata = { > > .phy_interface = PHY_INTERFACE_MODE_RGMII, > > - .phy_addr = 7, > > + .phy_addr = -1, > IIRC the auto detect do not work on all board > NACK Please give us some more information why this doesn't work or on which boards this doesn't work. Rejecting patches with 'IIRC' just blocks the patch without giving a clue what else should be done. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-21 15:07 ` Sascha Hauer @ 2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD [not found] ` <54C086AA.9030605@atmel.com> ` (2 more replies) 0 siblings, 3 replies; 9+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2015-01-22 4:35 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox > On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > > On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: >> On 17:54 Mon 19 Jan , Bo Shen wrote: >>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. >>> So, let the GMAC auto detect phy id, or else hard code to 7, >>> it can not work on these two boards. >>> >>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>> --- >>> >>> arch/arm/boards/sama5d3xek/init.c | 2 +- >>> 1 file changed, 1 insertion(+), 1 deletion(-) >>> >>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c >>> index 49d2b37..0b83147 100644 >>> --- a/arch/arm/boards/sama5d3xek/init.c >>> +++ b/arch/arm/boards/sama5d3xek/init.c >>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} >>> #if defined(CONFIG_DRIVER_NET_MACB) >>> static struct macb_platform_data gmac_pdata = { >>> .phy_interface = PHY_INTERFACE_MODE_RGMII, >>> - .phy_addr = 7, >>> + .phy_addr = -1, >> IIRC the auto detect do not work on all board >> NACK > > Please give us some more information why this doesn't work or on which > boards this doesn't work. Rejecting patches with 'IIRC' just blocks the > patch without giving a clue what else should be done. This is the same board but différent SoC Module Bo MUST test it on all of them before do such modification IIRC the phy is detect on addr 1 instead of 7 on some CPU Module Best Regards, J. > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
[parent not found: <54C086AA.9030605@atmel.com>]
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id [not found] ` <54C086AA.9030605@atmel.com> @ 2015-01-22 6:20 ` Bo Shen 0 siblings, 0 replies; 9+ messages in thread From: Bo Shen @ 2015-01-22 6:20 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD, Sascha Hauer; +Cc: barebox On 01/22/2015 01:12 PM, Bo Shen wrote: > Hi J, > > On 01/22/2015 12:35 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: >> >>> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> >>> wrote: >>> >>> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe >>> PLAGNIOL-VILLARD wrote: >>>> On 17:54 Mon 19 Jan , Bo Shen wrote: >>>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. >>>>> So, let the GMAC auto detect phy id, or else hard code to 7, >>>>> it can not work on these two boards. >>>>> >>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>>> --- >>>>> >>>>> arch/arm/boards/sama5d3xek/init.c | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm/boards/sama5d3xek/init.c >>>>> b/arch/arm/boards/sama5d3xek/init.c >>>>> index 49d2b37..0b83147 100644 >>>>> --- a/arch/arm/boards/sama5d3xek/init.c >>>>> +++ b/arch/arm/boards/sama5d3xek/init.c >>>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} >>>>> #if defined(CONFIG_DRIVER_NET_MACB) >>>>> static struct macb_platform_data gmac_pdata = { >>>>> .phy_interface = PHY_INTERFACE_MODE_RGMII, >>>>> - .phy_addr = 7, >>>>> + .phy_addr = -1, >>>> IIRC the auto detect do not work on all board >>>> NACK >>> >>> Please give us some more information why this doesn't work or on which >>> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the >>> patch without giving a clue what else should be done. >> >> This is the same board but différent SoC Module >> >> Bo MUST test it on all of them before do such modification > > Yes, I do this kind of test. > >> IIRC the phy is detect on addr 1 instead of 7 on some CPU Module > > Yes, as the commit message specified, the phy address of SAMA5D33 and > SAMA5D35 are 1. So, let the GMAC to auto detect the phy address, or else > using the hard coded phy address 7, then the network won't work on > SAMA5D33 and SAMA5D35 module. > >> Best Regards, >> J. >>> >>> Sascha >>> >>> -- >>> Pengutronix e.K. >>> | | >>> Industrial Linux Solutions | >>> http://www.pengutronix.de/ | >>> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: >>> +49-5121-206917-0 | >>> Amtsgericht Hildesheim, HRA 2686 | Fax: >>> +49-5121-206917-5555 | >> > > Best Regards, > Bo Shen _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD [not found] ` <54C086AA.9030605@atmel.com> @ 2015-01-22 6:20 ` Bo Shen 2015-01-23 7:36 ` Sascha Hauer 2 siblings, 0 replies; 9+ messages in thread From: Bo Shen @ 2015-01-22 6:20 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD, Sascha Hauer; +Cc: barebox Hi J, On 01/22/2015 12:35 PM, Jean-Christophe PLAGNIOL-VILLARD wrote: > >> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: >> >> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: >>> On 17:54 Mon 19 Jan , Bo Shen wrote: >>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. >>>> So, let the GMAC auto detect phy id, or else hard code to 7, >>>> it can not work on these two boards. >>>> >>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>> --- >>>> >>>> arch/arm/boards/sama5d3xek/init.c | 2 +- >>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>> >>>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c >>>> index 49d2b37..0b83147 100644 >>>> --- a/arch/arm/boards/sama5d3xek/init.c >>>> +++ b/arch/arm/boards/sama5d3xek/init.c >>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} >>>> #if defined(CONFIG_DRIVER_NET_MACB) >>>> static struct macb_platform_data gmac_pdata = { >>>> .phy_interface = PHY_INTERFACE_MODE_RGMII, >>>> - .phy_addr = 7, >>>> + .phy_addr = -1, >>> IIRC the auto detect do not work on all board >>> NACK >> >> Please give us some more information why this doesn't work or on which >> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the >> patch without giving a clue what else should be done. > > This is the same board but différent SoC Module > > Bo MUST test it on all of them before do such modification Yes, I do this kind of test. > IIRC the phy is detect on addr 1 instead of 7 on some CPU Module Yes, as the commit message specified, the phy address of SAMA5D33 and SAMA5D35 are 1. So, let the GMAC to auto detect the phy address, or else using the hard coded phy address 7, then the network won't work on SAMA5D33 and SAMA5D35 module. > Best Regards, > J. >> >> Sascha >> >> -- >> Pengutronix e.K. | | >> Industrial Linux Solutions | http://www.pengutronix.de/ | >> Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | >> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > Best Regards, Bo Shen _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD [not found] ` <54C086AA.9030605@atmel.com> 2015-01-22 6:20 ` Bo Shen @ 2015-01-23 7:36 ` Sascha Hauer 2015-01-23 8:00 ` Jean-Christophe PLAGNIOL-VILLARD 2 siblings, 1 reply; 9+ messages in thread From: Sascha Hauer @ 2015-01-23 7:36 UTC (permalink / raw) To: Jean-Christophe PLAGNIOL-VILLARD; +Cc: barebox On Thu, Jan 22, 2015 at 12:35:17PM +0800, Jean-Christophe PLAGNIOL-VILLARD wrote: > > > On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > > > > On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: > >> On 17:54 Mon 19 Jan , Bo Shen wrote: > >>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. > >>> So, let the GMAC auto detect phy id, or else hard code to 7, > >>> it can not work on these two boards. > >>> > >>> Signed-off-by: Bo Shen <voice.shen@atmel.com> > >>> --- > >>> > >>> arch/arm/boards/sama5d3xek/init.c | 2 +- > >>> 1 file changed, 1 insertion(+), 1 deletion(-) > >>> > >>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c > >>> index 49d2b37..0b83147 100644 > >>> --- a/arch/arm/boards/sama5d3xek/init.c > >>> +++ b/arch/arm/boards/sama5d3xek/init.c > >>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} > >>> #if defined(CONFIG_DRIVER_NET_MACB) > >>> static struct macb_platform_data gmac_pdata = { > >>> .phy_interface = PHY_INTERFACE_MODE_RGMII, > >>> - .phy_addr = 7, > >>> + .phy_addr = -1, > >> IIRC the auto detect do not work on all board > >> NACK > > > > Please give us some more information why this doesn't work or on which > > boards this doesn't work. Rejecting patches with 'IIRC' just blocks the > > patch without giving a clue what else should be done. > > This is the same board but différent SoC Module > > Bo MUST test it on all of them before do such modification > > IIRC the phy is detect on addr 1 instead of 7 on some CPU Module When the original 7 does not work on all boards, then autodetection seems to be a valid solution. Sascha -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id 2015-01-23 7:36 ` Sascha Hauer @ 2015-01-23 8:00 ` Jean-Christophe PLAGNIOL-VILLARD 0 siblings, 0 replies; 9+ messages in thread From: Jean-Christophe PLAGNIOL-VILLARD @ 2015-01-23 8:00 UTC (permalink / raw) To: Sascha Hauer; +Cc: barebox > On Jan 23, 2015, at 3:36 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: > > On Thu, Jan 22, 2015 at 12:35:17PM +0800, Jean-Christophe PLAGNIOL-VILLARD wrote: >> >>> On Jan 21, 2015, at 11:07 PM, Sascha Hauer <s.hauer@pengutronix.de> wrote: >>> >>> On Mon, Jan 19, 2015 at 12:39:39PM +0100, Jean-Christophe PLAGNIOL-VILLARD wrote: >>>> On 17:54 Mon 19 Jan , Bo Shen wrote: >>>>> On the SAMA5D33 and SAMA5D35 the GMAC PHY ID is 1 while not 7. >>>>> So, let the GMAC auto detect phy id, or else hard code to 7, >>>>> it can not work on these two boards. >>>>> >>>>> Signed-off-by: Bo Shen <voice.shen@atmel.com> >>>>> --- >>>>> >>>>> arch/arm/boards/sama5d3xek/init.c | 2 +- >>>>> 1 file changed, 1 insertion(+), 1 deletion(-) >>>>> >>>>> diff --git a/arch/arm/boards/sama5d3xek/init.c b/arch/arm/boards/sama5d3xek/init.c >>>>> index 49d2b37..0b83147 100644 >>>>> --- a/arch/arm/boards/sama5d3xek/init.c >>>>> +++ b/arch/arm/boards/sama5d3xek/init.c >>>>> @@ -123,7 +123,7 @@ static void ek_add_device_nand(void) {} >>>>> #if defined(CONFIG_DRIVER_NET_MACB) >>>>> static struct macb_platform_data gmac_pdata = { >>>>> .phy_interface = PHY_INTERFACE_MODE_RGMII, >>>>> - .phy_addr = 7, >>>>> + .phy_addr = -1, >>>> IIRC the auto detect do not work on all board >>>> NACK >>> >>> Please give us some more information why this doesn't work or on which >>> boards this doesn't work. Rejecting patches with 'IIRC' just blocks the >>> patch without giving a clue what else should be done. >> >> This is the same board but différent SoC Module >> >> Bo MUST test it on all of them before do such modification >> >> IIRC the phy is detect on addr 1 instead of 7 on some CPU Module > > When the original 7 does not work on all boards, then autodetection > seems to be a valid solution. Except the auto detection does not work on all board so as we can detect the board and SoC we can known the phy_addr > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2015-01-23 8:00 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-19 9:54 [PATCH] ARM: atmel: sama5d3xek: let gmac auto detect phy id Bo Shen
2015-01-19 11:39 ` Jean-Christophe PLAGNIOL-VILLARD
2015-01-20 0:56 ` Bo Shen
2015-01-21 15:07 ` Sascha Hauer
2015-01-22 4:35 ` Jean-Christophe PLAGNIOL-VILLARD
[not found] ` <54C086AA.9030605@atmel.com>
2015-01-22 6:20 ` Bo Shen
2015-01-22 6:20 ` Bo Shen
2015-01-23 7:36 ` Sascha Hauer
2015-01-23 8:00 ` Jean-Christophe PLAGNIOL-VILLARD
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox