* [PATCH 1/9] Docs: just fix a typo
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well Juergen Borleis
` (8 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/imx.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst
index 0fde3e7..21ea825 100644
--- a/Documentation/boards/imx.rst
+++ b/Documentation/boards/imx.rst
@@ -91,7 +91,7 @@ command for writing to NAND flash.
i.MX boards
-----------
-Not supported all boards have a description here. Many newer boards also do
+Not all supported boards have a description here. Many newer boards also do
not have individual defconfig files, they are covered by ``imx_v7_defconfig``
or ``imx_defconfig`` instead.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
2015-01-26 10:39 ` [PATCH 1/9] Docs: just fix a typo Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:46 ` Lucas Stach
2015-01-26 10:39 ` [PATCH 3/9] Docs: add some info about the Ka-Ro TX25 related bootloader images Juergen Borleis
` (7 subsequent siblings)
9 siblings, 1 reply; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Just a try to be consistent in one sentence.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/mxs.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 6c8bdb5..879663c 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
Booting second stage
--------------------
-The second stage images can be started with the barebox bootm command or
+The second stage images can be started with the barebox 'bootm' command or
just jumped into using the 'go' command.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well
2015-01-26 10:39 ` [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well Juergen Borleis
@ 2015-01-26 10:46 ` Lucas Stach
2015-01-26 10:50 ` Lucas Stach
0 siblings, 1 reply; 15+ messages in thread
From: Lucas Stach @ 2015-01-26 10:46 UTC (permalink / raw)
To: Juergen Borleis; +Cc: barebox
Am Montag, den 26.01.2015, 11:39 +0100 schrieb Juergen Borleis:
> Just a try to be consistent in one sentence.
>
> Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
> ---
> Documentation/boards/mxs.rst | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
> index 6c8bdb5..879663c 100644
> --- a/Documentation/boards/mxs.rst
> +++ b/Documentation/boards/mxs.rst
> @@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
> Booting second stage
> --------------------
>
> -The second stage images can be started with the barebox bootm command or
> +The second stage images can be started with the barebox 'bootm' command or
> just jumped into using the 'go' command.
Wouldn't it be better to directly link to those commands by
using :ref:`command_bootm` (same for go), like in other parts of the
documentation?
Regards,
Lucas
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well
2015-01-26 10:46 ` Lucas Stach
@ 2015-01-26 10:50 ` Lucas Stach
0 siblings, 0 replies; 15+ messages in thread
From: Lucas Stach @ 2015-01-26 10:50 UTC (permalink / raw)
To: Juergen Borleis; +Cc: barebox
Am Montag, den 26.01.2015, 11:46 +0100 schrieb Lucas Stach:
> Am Montag, den 26.01.2015, 11:39 +0100 schrieb Juergen Borleis:
> > Just a try to be consistent in one sentence.
> >
> > Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
> > ---
> > Documentation/boards/mxs.rst | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
> > index 6c8bdb5..879663c 100644
> > --- a/Documentation/boards/mxs.rst
> > +++ b/Documentation/boards/mxs.rst
> > @@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
> > Booting second stage
> > --------------------
> >
> > -The second stage images can be started with the barebox bootm command or
> > +The second stage images can be started with the barebox 'bootm' command or
> > just jumped into using the 'go' command.
>
> Wouldn't it be better to directly link to those commands by
> using :ref:`command_bootm` (same for go), like in other parts of the
> documentation?
>
And I just noticed you do exactly that in Patch 5/9.
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH 3/9] Docs: add some info about the Ka-Ro TX25 related bootloader images
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
2015-01-26 10:39 ` [PATCH 1/9] Docs: just fix a typo Juergen Borleis
2015-01-26 10:39 ` [PATCH 2/9] Docs: just mark the 'bootm' command like the 'go' command as well Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 4/9] Docs: add some info about the Phytec's phyCORE27 and phyCARD27 " Juergen Borleis
` (6 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/imx/Karo-TX25.rst | 10 ++++++++++
1 file changed, 10 insertions(+)
create mode 100644 Documentation/boards/imx/Karo-TX25.rst
diff --git a/Documentation/boards/imx/Karo-TX25.rst b/Documentation/boards/imx/Karo-TX25.rst
new file mode 100644
index 0000000..756c99d
--- /dev/null
+++ b/Documentation/boards/imx/Karo-TX25.rst
@@ -0,0 +1,10 @@
+Ka-Ro TX25
+==========
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``Ka-Ro TX25``
+is enabled.
+
+Use the corresponding ``barebox-karo-tx25.img`` for external NAND boot.
+Use the corresponding ``barebox-karo-tx25-internal.img`` for internal NAND, USB
+or SD card boot.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 4/9] Docs: add some info about the Phytec's phyCORE27 and phyCARD27 related bootloader images
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (2 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 3/9] Docs: add some info about the Ka-Ro TX25 related bootloader images Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 5/9] Docs: extend the mentioned commands with a link to their documentation Juergen Borleis
` (5 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst | 8 ++++++++
Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst | 8 ++++++++
2 files changed, 16 insertions(+)
create mode 100644 Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
create mode 100644 Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
diff --git a/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst b/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
new file mode 100644
index 0000000..d5d3837
--- /dev/null
+++ b/Documentation/boards/imx/Phytec-phyCARD-i.MX27.rst
@@ -0,0 +1,8 @@
+Phytec phyCARD-i.MX27
+=====================
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``phyCard-i.MX27``
+is enabled.
+
+Use the corresponding ``barebox-phytec-phycard-imx27.img`` file for this target.
diff --git a/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst b/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
new file mode 100644
index 0000000..4b40be7
--- /dev/null
+++ b/Documentation/boards/imx/Phytec-phyCORE-i.MX27.rst
@@ -0,0 +1,8 @@
+Phytec phyCORE-i.MX27
+=====================
+
+Building the bootloader image for this target is covered by the ``imx_defconfig``
+multiimage configuration if the ``System Type`` menu entry ``phyCORE-i.MX27``
+is enabled.
+
+Use the corresponding ``barebox-phytec-phycore-imx27.img`` file for this target.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 5/9] Docs: extend the mentioned commands with a link to their documentation
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (3 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 4/9] Docs: add some info about the Phytec's phyCORE27 and phyCARD27 " Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 6/9] Docs: move the individual MXS target documentation where they belong to Juergen Borleis
` (4 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/mxs.rst | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 879663c..1c26826 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -115,5 +115,5 @@ mxsboot tool which changes this sector number in the image.
Booting second stage
--------------------
-The second stage images can be started with the barebox 'bootm' command or
-just jumped into using the 'go' command.
+The second stage images can be started with the barebox :ref:`command_bootm` command or
+just jumped into using the :ref:`command_go` command.
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 6/9] Docs: move the individual MXS target documentation where they belong to
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (4 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 5/9] Docs: extend the mentioned commands with a link to their documentation Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 7/9] Docs: the name of the default config file for the FSL i.MX23 evk has changed Juergen Borleis
` (3 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
i.MX and MXS differs in their global documentation. Honor this.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/imx.rst | 1 -
Documentation/boards/mxs.rst | 12 ++++++++++++
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/Documentation/boards/imx.rst b/Documentation/boards/imx.rst
index 21ea825..466f69c 100644
--- a/Documentation/boards/imx.rst
+++ b/Documentation/boards/imx.rst
@@ -101,4 +101,3 @@ or ``imx_defconfig`` instead.
:maxdepth: 1
imx/*
- mxs/*
diff --git a/Documentation/boards/mxs.rst b/Documentation/boards/mxs.rst
index 1c26826..cfcd4c7 100644
--- a/Documentation/boards/mxs.rst
+++ b/Documentation/boards/mxs.rst
@@ -117,3 +117,15 @@ Booting second stage
The second stage images can be started with the barebox :ref:`command_bootm` command or
just jumped into using the :ref:`command_go` command.
+
+i.MXs boards
+------------
+
+Not all supported boards have a description here.
+
+.. toctree::
+ :glob:
+ :numbered:
+ :maxdepth: 1
+
+ mxs/*
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 7/9] Docs: the name of the default config file for the FSL i.MX23 evk has changed
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (5 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 6/9] Docs: move the individual MXS target documentation where they belong to Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 8/9] Docs: extend the mentioned commands with a link to their documentation Juergen Borleis
` (2 subsequent siblings)
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/mxs/Freescale-i.MX23-evk.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
index 85dde46..cb73ec1 100644
--- a/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
+++ b/Documentation/boards/mxs/Freescale-i.MX23-evk.rst
@@ -21,7 +21,7 @@ How to get the bootloader binary image
Using the default configuration::
- make ARCH=arm imx23evk_defconfig
+ make ARCH=arm freescale-mx23-evk_defconfig
Build the bootloader binary image::
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 8/9] Docs: extend the mentioned commands with a link to their documentation
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (6 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 7/9] Docs: the name of the default config file for the FSL i.MX23 evk has changed Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-26 10:39 ` [PATCH 9/9] Docs: add some info about the Olimex's Olinuxino related bootloader images Juergen Borleis
2015-01-27 7:39 ` A little bit fixing and extending the existing documentation Sascha Hauer
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/mxs/KaRo-TX28.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/boards/mxs/KaRo-TX28.rst b/Documentation/boards/mxs/KaRo-TX28.rst
index 0c5dc71..6cad5eb 100644
--- a/Documentation/boards/mxs/KaRo-TX28.rst
+++ b/Documentation/boards/mxs/KaRo-TX28.rst
@@ -38,5 +38,5 @@ This produces the following images:
* barebox-karo-tx28-bootstream.img - Use with the bcb command
* barebox-karo-tx28-sd.img - Use for SD cards
- * barebox-karo-tx28-2nd.img - Use for 2nd stage booting (with bootm)
+ * barebox-karo-tx28-2nd.img - Use for 2nd stage booting (with :ref:`command_bootm`)
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* [PATCH 9/9] Docs: add some info about the Olimex's Olinuxino related bootloader images
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (7 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 8/9] Docs: extend the mentioned commands with a link to their documentation Juergen Borleis
@ 2015-01-26 10:39 ` Juergen Borleis
2015-01-27 7:39 ` A little bit fixing and extending the existing documentation Sascha Hauer
9 siblings, 0 replies; 15+ messages in thread
From: Juergen Borleis @ 2015-01-26 10:39 UTC (permalink / raw)
To: barebox
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
Documentation/boards/mxs/Olimex-olinuxino.rst | 26 ++++++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/boards/mxs/Olimex-olinuxino.rst
diff --git a/Documentation/boards/mxs/Olimex-olinuxino.rst b/Documentation/boards/mxs/Olimex-olinuxino.rst
new file mode 100644
index 0000000..a06eb33
--- /dev/null
+++ b/Documentation/boards/mxs/Olimex-olinuxino.rst
@@ -0,0 +1,26 @@
+Olimex LTD Olinuxino
+====================
+
+The CPU module
+--------------
+
+This CPU module is based on a Freescale i.MX23 CPU.
+
+How to get the bootloader binary image
+--------------------------------------
+
+Using the default configuration::
+
+ make ARCH=arm imx233-olinuxino_defconfig
+
+Build the binary image::
+
+ make ARCH=arm CROSS_COMPILE=armv5compiler
+
+**NOTE:** replace the armv5compiler with your ARM v5 cross compiler.
+
+This produces the following images:
+
+ * barebox-olinuxino-imx23-bootstream.img - Use with the bcb command
+ * barebox-olinuxino-imx23-sd.img - Use for SD cards
+ * barebox-olinuxino-imx23-2nd.img - Use for 2nd stage booting (with :ref:`command_bootm`)
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: A little bit fixing and extending the existing documentation
2015-01-26 10:39 A little bit fixing and extending the existing documentation Juergen Borleis
` (8 preceding siblings ...)
2015-01-26 10:39 ` [PATCH 9/9] Docs: add some info about the Olimex's Olinuxino related bootloader images Juergen Borleis
@ 2015-01-27 7:39 ` Sascha Hauer
9 siblings, 0 replies; 15+ messages in thread
From: Sascha Hauer @ 2015-01-27 7:39 UTC (permalink / raw)
To: Juergen Borleis; +Cc: barebox
On Mon, Jan 26, 2015 at 11:39:47AM +0100, Juergen Borleis wrote:
> Just some minor changes...
Thanks. Applied all but the second patch.
Sascha
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 15+ messages in thread