From: Juergen Borleis <jbe@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 6/6] mfd: da9063: add da9063 watchdog and system restart driver
Date: Tue, 16 Jun 2015 13:56:09 +0200 [thread overview]
Message-ID: <1434455769-17216-6-git-send-email-jbe@pengutronix.de> (raw)
In-Reply-To: <1434455769-17216-1-git-send-email-jbe@pengutronix.de>
From: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
---
drivers/mfd/Kconfig | 4 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/da9063.c | 160 +++++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 165 insertions(+)
create mode 100644 drivers/mfd/da9063.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index bf012bf..1be9f61 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -20,6 +20,10 @@ config MFD_DA9053_RESET_FEATURE
help
This PMIC unit can be used to reset/restart the system.
+config MFD_DA9063
+ depends on I2C
+ bool "DA9063 PMIC driver"
+
config MFD_LP3972
depends on I2C
bool "LP3972 driver"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2899dde..041915a 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_MFD_ACT8846) += act8846.o
obj-$(CONFIG_MFD_DA9053) += da9053.o
+obj-$(CONFIG_MFD_DA9063) += da9063.o
obj-$(CONFIG_MFD_LP3972) += lp3972.o
obj-$(CONFIG_MFD_MC13XXX) += mc13xxx.o
obj-$(CONFIG_MFD_MC34704) += mc34704.o
diff --git a/drivers/mfd/da9063.c b/drivers/mfd/da9063.c
new file mode 100644
index 0000000..65b1fad
--- /dev/null
+++ b/drivers/mfd/da9063.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2015 Pengutronix, Philipp Zabel <p.zabel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <driver.h>
+#include <init.h>
+#include <i2c/i2c.h>
+#include <malloc.h>
+#include <notifier.h>
+#include <reset_source.h>
+#include <watchdog.h>
+
+struct da9063 {
+ struct watchdog wd;
+ struct i2c_client *client;
+ struct notifier_block notify;
+};
+
+/* System Control and Event Registers */
+#define DA9063_REG_FAULT_LOG 0x05
+#define DA9063_REG_CONTROL_D 0x11
+#define DA9063_REG_CONTROL_F 0x13
+
+/* DA9063_REG_FAULT_LOG (addr=0x05) */
+#define DA9063_TWD_ERROR 0x01
+#define DA9063_POR 0x02
+#define DA9063_NSHUTDOWN 0x40
+
+/* DA9063_REG_CONTROL_D (addr=0x11) */
+#define DA9063_TWDSCALE_MASK 0x07
+
+/* DA9063_REG_CONTROL_F (addr=0x13) */
+#define DA9063_SHUTDOWN 0x02
+
+static int da9063_watchdog_set_timeout(struct watchdog *wd, unsigned timeout)
+{
+ struct da9063 *priv = container_of(wd, struct da9063, wd);
+ struct device_d *dev = &priv->client->dev;
+ unsigned int scale = 0;
+ int ret;
+ u8 val;
+
+ if (timeout > 131)
+ return -EINVAL;
+
+ if (timeout) {
+ timeout *= 1000; /* convert to ms */
+ scale = 0;
+ while (timeout > (2048 << scale) && scale <= 6)
+ scale++;
+ dev_dbg(dev, "calculated TWDSCALE=%u (req=%ims calc=%ims)\n",
+ scale, timeout, 2048 << scale);
+ scale++; /* scale 0 disables the WD */
+ }
+
+ ret = i2c_read_reg(priv->client, DA9063_REG_CONTROL_D, &val, 1);
+ if (ret < 0)
+ return ret;
+
+ val &= ~DA9063_TWDSCALE_MASK;
+ val |= scale;
+
+ return i2c_write_reg(priv->client, DA9063_REG_CONTROL_D, &val, 1);
+}
+
+static void da9063_detect_reset_source(struct da9063 *priv)
+{
+ int ret;
+ u8 val;
+
+ ret = i2c_read_reg(priv->client, DA9063_REG_FAULT_LOG, &val, 1);
+ if (ret < 0)
+ return;
+
+ /* Write one to clear */
+ i2c_write_reg(priv->client, DA9063_REG_FAULT_LOG, &val, 1);
+
+ if (val & DA9063_TWD_ERROR) {
+ reset_source_set(RESET_WDG);
+ return;
+ }
+
+ if (val & DA9063_POR) {
+ reset_source_set(RESET_POR);
+ return;
+ }
+
+ if (val & DA9063_NSHUTDOWN) {
+ reset_source_set(RESET_RST);
+ return;
+ }
+
+ /* else keep the default 'unknown' state */
+}
+
+static int da9063_restart(struct notifier_block *nb, unsigned long event, void *data)
+{
+ struct da9063 *priv = container_of(nb, struct da9063, notify);
+ u8 val = DA9063_SHUTDOWN;
+
+ return i2c_write_reg(priv->client, DA9063_REG_CONTROL_F, &val, 1);
+}
+
+static int da9063_probe(struct device_d *dev)
+{
+ struct da9063 *priv = NULL;
+ int ret;
+
+ priv = xzalloc(sizeof(struct da9063));
+ priv->wd.set_timeout = da9063_watchdog_set_timeout;
+ priv->client = to_i2c_client(dev);
+ priv->notify.notifier_call = da9063_restart;
+
+ ret = watchdog_register(&priv->wd);
+ if (ret)
+ goto on_error;
+
+ da9063_detect_reset_source(priv);
+
+ register_restart_handler(&priv->notify);
+
+ dev->priv = priv;
+
+ return 0;
+
+on_error:
+ if (priv)
+ free(priv);
+ return ret;
+}
+
+static struct platform_device_id da9063_id[] = {
+ { "da9063", },
+ { }
+};
+
+static struct driver_d da9063_driver = {
+ .name = "da9063",
+ .probe = da9063_probe,
+ .id_table = da9063_id,
+};
+
+static int da9063_init(void)
+{
+ return i2c_driver_register(&da9063_driver);
+}
+
+device_initcall(da9063_init);
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-06-16 11:56 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-16 11:56 [PATCH 1/6] Documentation: add some info about the reset variants Juergen Borleis
2015-06-16 11:56 ` [PATCH 2/6] Watchdog/i.MX: make the watchdog driver a regular driver Juergen Borleis
2015-06-16 11:56 ` [PATCH 3/6] MFD/DA9053: adapt driver to the current reset source framework Juergen Borleis
2015-06-16 11:56 ` [PATCH 4/6] MFD/DA9053: provide system reset Juergen Borleis
2015-06-16 11:56 ` [PATCH 5/6] MFD/DA9053: remove not required header file Juergen Borleis
2015-06-16 11:56 ` Juergen Borleis [this message]
2015-06-16 12:05 ` [PATCH 1/6] Documentation: add some info about the reset variants Jürgen Borleis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1434455769-17216-6-git-send-email-jbe@pengutronix.de \
--to=jbe@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox