From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC 08/12] net: picotcp: add ifconfig command
Date: Wed, 15 Jul 2015 23:13:46 +0300 [thread overview]
Message-ID: <1436991230-14251-9-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1436991230-14251-1-git-send-email-antonynpavlov@gmail.com>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
net/Makefile | 1 +
net/picotcp/Kconfig | 5 +++
net/picotcp_ifconfig.c | 116 +++++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 122 insertions(+)
diff --git a/net/Makefile b/net/Makefile
index bfe74fb..d5b133b 100644
--- a/net/Makefile
+++ b/net/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_NET_PICOTCP) += picotcp/
obj-$(CONFIG_NET_PICOTCP) += picotcp.o
obj-$(CONFIG_CMD_PICOTCP_TEST_IPV4) += picotcp_test_ipv4.o
+obj-$(CONFIG_CMD_PICOTCP_IFCONFIG) += picotcp_ifconfig.o
diff --git a/net/picotcp/Kconfig b/net/picotcp/Kconfig
index 17b8293..9a2d628 100644
--- a/net/picotcp/Kconfig
+++ b/net/picotcp/Kconfig
@@ -38,4 +38,9 @@ config CMD_PICOTCP_TEST_IPV4
depends on NET_PICO_SUPPORT_IPV4
prompt "test_picotcp command"
+config CMD_PICOTCP_IFCONFIG
+ bool
+ depends on NET_PICO_SUPPORT_IPV4
+ prompt "ifconfig command"
+
endif # NET_PICOTCP
diff --git a/net/picotcp_ifconfig.c b/net/picotcp_ifconfig.c
new file mode 100644
index 0000000..1d4e89b
--- /dev/null
+++ b/net/picotcp_ifconfig.c
@@ -0,0 +1,116 @@
+#include <common.h>
+#include <command.h>
+#include <complete.h>
+
+#include <pico_stack.h>
+#include <pico_ipv4.h>
+#include <pico_dev_null.h>
+#include <pico_icmp4.h>
+#include <pico_tree.h>
+
+extern struct pico_tree Device_tree;
+extern struct pico_tree Tree_dev_link;
+
+static void printf_iface(struct pico_device *dev)
+{
+ struct pico_ipv4_link *link;
+ struct pico_tree_node *index;
+
+ printf("%-10s", dev->name);
+
+ if (dev->eth) {
+ struct pico_ethdev *eth = dev->eth;
+
+ printf("Link encap:Ethernet HWaddr ");
+ printf("%02x:%02x:%02x:%02x:%02x:%02x",
+ eth->mac.addr[0], eth->mac.addr[1],
+ eth->mac.addr[2], eth->mac.addr[3],
+ eth->mac.addr[4], eth->mac.addr[5]);
+ }
+ printf("\n");
+
+ pico_tree_foreach(index, &Tree_dev_link) {
+ link = index->keyValue;
+ if (dev == link->dev) {
+ char ipstr[16];
+ pico_ipv4_to_string(ipstr, link->address.addr);
+ printf(" inet addr:%s", ipstr);
+ pico_ipv4_to_string(ipstr, link->netmask.addr);
+ printf(" Mask:%s\n", ipstr);
+ }
+ }
+ printf("\n");
+}
+
+static int do_ifconfig(int argc, char *argv[])
+{
+ struct pico_device *picodev;
+ struct pico_ip4 ipaddr, nm;
+ int ret;
+
+ if (argc == 1) {
+ struct pico_tree_node *index;
+
+ pico_tree_foreach(index, &Device_tree) {
+ printf_iface(index->keyValue);
+ }
+
+ return 0;
+ }
+
+ picodev = pico_get_device(argv[1]);
+ if (!picodev) {
+ struct pico_device *dev;
+ struct pico_tree_node *index;
+
+ perror("wrong device name");
+
+ printf("available interfaces:\n");
+
+ pico_tree_foreach(index, &Device_tree) {
+ dev = index->keyValue;
+ printf("%s\n", dev->name);
+ }
+
+ return 1;
+ }
+
+ if (argc == 2) {
+ struct pico_tree_node *index;
+
+ pico_tree_foreach(index, &Device_tree) {
+ struct pico_device *dev = index->keyValue;
+
+ if (!strcmp(dev->name, argv[1])) {
+ printf_iface(dev);
+ }
+ }
+
+ return 0;
+ }
+
+ if (argc < 4) {
+ perror("ifconfig");
+ return 1;
+ }
+
+ ret = pico_string_to_ipv4(argv[2], &(ipaddr.addr));
+ if (ret) {
+ perror("wrong ipaddr");
+ return 1;
+ }
+
+ ret = pico_string_to_ipv4(argv[3], &(nm.addr));
+ if (ret) {
+ perror("wrong netmask");
+ return 1;
+ }
+
+ pico_ipv4_link_add(picodev, ipaddr, nm);
+
+ return 0;
+}
+
+BAREBOX_CMD_START(ifconfig)
+ .cmd = do_ifconfig,
+BAREBOX_CMD_END
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-07-15 20:14 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-07-15 20:13 [RFC 00/12] barebox picotcp integration (2015.07.15) Antony Pavlov
2015-07-15 20:13 ` [RFC 01/12] picotcp: add barebox target support Antony Pavlov
2015-07-15 20:13 ` [RFC 02/12] picotcp: switch to Kbuild Antony Pavlov
2015-07-15 20:13 ` [RFC 03/12] net: add initial picotcp support Antony Pavlov
2015-07-15 20:13 ` [RFC 04/12] WIP: fs/nfs.c: convert to picotcp Antony Pavlov
2015-07-16 19:51 ` Sascha Hauer
2015-07-17 7:18 ` Antony Pavlov
2015-07-15 20:13 ` [RFC 05/12] WIP: fs/tftp.c: " Antony Pavlov
2015-07-15 20:13 ` [RFC 06/12] WIP: net/dns: " Antony Pavlov
2015-07-15 20:13 ` [RFC 07/12] net: picotcp: add test_picotcp command Antony Pavlov
2015-07-15 20:13 ` Antony Pavlov [this message]
2015-07-15 20:13 ` [RFC 09/12] net: picotcp: add ping command Antony Pavlov
2015-07-15 20:13 ` [RFC 10/12] net: picotcp: add route command Antony Pavlov
2015-07-15 20:13 ` [RFC 11/12] sandbox_defconfig: switch to picotcp Antony Pavlov
2015-07-15 20:13 ` [RFC 12/12] WIP: sandbox_defconfig: enable network testing-related stuff Antony Pavlov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1436991230-14251-9-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox