From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-lb0-x22b.google.com ([2a00:1450:4010:c04::22b]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1ZaS5T-00088T-JW for barebox@lists.infradead.org; Fri, 11 Sep 2015 17:26:13 +0000 Received: by lbpo4 with SMTP id o4so43370630lbp.2 for ; Fri, 11 Sep 2015 10:25:49 -0700 (PDT) From: Peter Mamonov Date: Fri, 11 Sep 2015 20:27:54 +0300 Message-Id: <1441992476-11703-2-git-send-email-pmamonov@gmail.com> In-Reply-To: <1441992476-11703-1-git-send-email-pmamonov@gmail.com> References: <1441992476-11703-1-git-send-email-pmamonov@gmail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [RFC v2 1/3] usb: ehci-hcd: port periodic transactions implementation from the u-boot To: barebox@lists.infradead.org Cc: Peter Mamonov Signed-off-by: Peter Mamonov --- drivers/usb/host/ehci-hcd.c | 426 +++++++++++++++++++++++++++++++++++++++++++- drivers/usb/host/ehci.h | 15 +- 2 files changed, 439 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9d74d2f..c9bf703 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -48,6 +48,18 @@ struct ehci_priv { int (*init)(void *drvdata); int (*post_init)(void *drvdata); void *drvdata; + int periodic_schedules; + struct QH *periodic_queue; + uint32_t *periodic_list; +}; + +struct int_queue { + int elementsize; + unsigned long pipe; + struct QH *first; + struct QH *current; + struct QH *last; + struct qTD *tds; }; #define to_ehci(ptr) container_of(ptr, struct ehci_priv, host) @@ -770,6 +782,8 @@ static int ehci_init(struct usb_host *host) uint32_t reg; uint32_t cmd; int ret = 0; + struct QH *periodic; + int i; ehci_halt(ehci); @@ -800,6 +814,39 @@ static int ehci_init(struct usb_host *host) ehci_writel(&ehci->hcor->or_asynclistaddr, ba); } + /* + * Set up periodic list + * Step 1: Parent QH for all periodic transfers. + */ + ehci->periodic_schedules = 0; + periodic = ehci->periodic_queue; + memset(periodic, 0, sizeof(*periodic)); + periodic->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); + periodic->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); + periodic->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + + /* + * Step 2: Setup frame-list: Every microframe, USB tries the same list. + * In particular, device specifications on polling frequency + * are disregarded. Keyboards seem to send NAK/NYet reliably + * when polled with an empty buffer. + * + * Split Transactions will be spread across microframes using + * S-mask and C-mask. + */ + if (ehci->periodic_list == NULL) + ehci->periodic_list = memalign(4096, 1024 * 4); + if (!ehci->periodic_list) + return -ENOMEM; + for (i = 0; i < 1024; i++) { + ehci->periodic_list[i] = cpu_to_hc32((unsigned long)periodic + | QH_LINK_TYPE_QH); + } + + /* Set periodic list base address */ + ehci_writel(&ehci->hcor->or_periodiclistbase, + (unsigned long)ehci->periodic_list); + reg = ehci_readl(&ehci->hccr->cr_hcsparams); descriptor.hub.bNbrPorts = HCS_N_PORTS(reg); @@ -871,15 +918,390 @@ submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, } static int +disable_periodic(struct ehci_priv *ehci) +{ + uint32_t cmd; + struct ehci_hcor *hcor = ehci->hcor; + int ret; + + cmd = ehci_readl(&hcor->or_usbcmd); + cmd &= ~CMD_PSE; + ehci_writel(&hcor->or_usbcmd, cmd); + + ret = handshake((uint32_t *)&hcor->or_usbsts, + STS_PSS, 0, 100 * 1000); + if (ret < 0) { + printf("EHCI failed: timeout when disabling periodic list\n"); + return -ETIMEDOUT; + } + return 0; +} + +#define NEXT_QH(qh) (struct QH *)((0xa0000000 | (unsigned long)hc32_to_cpu((qh)->qh_link)) & ~0x1f) + +static int +enable_periodic(struct ehci_priv *ehci) +{ + uint32_t cmd; + struct ehci_hcor *hcor = ehci->hcor; + int ret; + uint64_t start; + + cmd = ehci_readl(&hcor->or_usbcmd); + cmd |= CMD_PSE; + ehci_writel(&hcor->or_usbcmd, cmd); + + ret = handshake((uint32_t *)&hcor->or_usbsts, + STS_PSS, STS_PSS, 100 * 1000); + if (ret < 0) { + printf("EHCI failed: timeout when enabling periodic list\n"); + return -ETIMEDOUT; + } + + start = get_time_ns(); + while(!is_timeout_non_interruptible(start, 1 * MSECOND)); + + return 0; +} + +static inline u8 ehci_encode_speed(enum usb_device_speed speed) +{ + #define QH_HIGH_SPEED 2 + #define QH_FULL_SPEED 0 + #define QH_LOW_SPEED 1 + if (speed == USB_SPEED_HIGH) + return QH_HIGH_SPEED; + if (speed == USB_SPEED_LOW) + return QH_LOW_SPEED; + return QH_FULL_SPEED; +} + +static void ehci_update_endpt2_dev_n_port(struct usb_device *udev, + struct QH *qh) +{ + struct usb_device *ttdev; + int parent_devnum; + + if (udev->speed != USB_SPEED_LOW && udev->speed != USB_SPEED_FULL) + return; + + /* + * For full / low speed devices we need to get the devnum and portnr of + * the tt, so of the first upstream usb-2 hub, there may be usb-1 hubs + * in the tree before that one! + */ + +//#ifdef CONFIG_DM_USB +#if 0 + /* + * When called from usb-uclass.c: usb_scan_device() udev->dev points + * to the parent udevice, not the actual udevice belonging to the + * udev as the device is not instantiated yet. So when searching + * for the first usb-2 parent start with udev->dev not + * udev->dev->parent . + */ + struct udevice *parent; + struct usb_device *uparent; + + ttdev = udev; + parent = udev->dev; + uparent = dev_get_parentdata(parent); + + while (uparent->speed != USB_SPEED_HIGH) { + struct udevice *dev = parent; + + if (device_get_uclass_id(dev->parent) != UCLASS_USB_HUB) { + printf("ehci: Error cannot find high-speed parent of usb-1 device\n"); + return; + } + + ttdev = dev_get_parentdata(dev); + parent = dev->parent; + uparent = dev_get_parentdata(parent); + } + parent_devnum = uparent->devnum; +#else + ttdev = udev; + while (ttdev->parent && ttdev->parent->speed != USB_SPEED_HIGH) + ttdev = ttdev->parent; + if (!ttdev->parent) + return; + parent_devnum = ttdev->parent->devnum; +#endif + + qh->qh_endpt2 |= cpu_to_hc32(QH_ENDPT2_PORTNUM(ttdev->portnr) | + QH_ENDPT2_HUBADDR(parent_devnum)); +} + +static struct int_queue *ehci_create_int_queue(struct usb_device *dev, + unsigned long pipe, int queuesize, int elementsize, + void *buffer, int interval) +{ + struct usb_host *host = dev->host; + struct ehci_priv *ehci = to_ehci(host); + struct int_queue *result = NULL; + uint32_t i, toggle; + struct QH *list = ehci->periodic_queue; + + /* + * Interrupt transfers requiring several transactions are not supported + * because bInterval is ignored. + * + * Also, ehci_submit_async() relies on wMaxPacketSize being a power of 2 + * <= PKT_ALIGN if several qTDs are required, while the USB + * specification does not constrain this for interrupt transfers. That + * means that ehci_submit_async() would support interrupt transfers + * requiring several transactions only as long as the transfer size does + * not require more than a single qTD. + */ + if (elementsize > usb_maxpacket(dev, pipe)) { + pr_err("%s: xfers requiring several transactions are not supported.\n", + __func__); + return NULL; + } + + debug("Enter create_int_queue\n"); + if (usb_pipetype(pipe) != PIPE_INTERRUPT) { + debug("non-interrupt pipe (type=%lu)", usb_pipetype(pipe)); + return NULL; + } + + /* limit to 4 full pages worth of data - + * we can safely fit them in a single TD, + * no matter the alignment + */ + if (elementsize >= 16384) { + debug("too large elements for interrupt transfers\n"); + return NULL; + } + + result = xzalloc(sizeof(*result)); + if (!result) { + debug("ehci intr queue: out of memory\n"); + goto fail1; + } + result->elementsize = elementsize; + result->pipe = pipe; + result->first = dma_alloc_coherent(sizeof(struct QH) * queuesize, + DMA_ADDRESS_BROKEN); + if (!result->first) { + debug("ehci intr queue: out of memory\n"); + goto fail2; + } + result->current = result->first; + result->last = result->first + queuesize - 1; + result->tds = dma_alloc_coherent(sizeof(struct qTD) * queuesize, + DMA_ADDRESS_BROKEN); + if (!result->tds) { + debug("ehci intr queue: out of memory\n"); + goto fail3; + } + memset(result->first, 0, sizeof(struct QH) * queuesize); + memset(result->tds, 0, sizeof(struct qTD) * queuesize); + + toggle = usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe)); + + for (i = 0; i < queuesize; i++) { + struct QH *qh = result->first + i; + struct qTD *td = result->tds + i; + void **buf = &qh->buffer; + + qh->qh_link = cpu_to_hc32((unsigned long)(qh+1) | QH_LINK_TYPE_QH); + if (i == queuesize - 1) + qh->qh_link = cpu_to_hc32(QH_LINK_TERMINATE); + + qh->qt_next = cpu_to_hc32((unsigned long)td); + qh->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + qh->qh_endpt1 = + cpu_to_hc32((0 << 28) | /* No NAK reload (ehci 4.9) */ + (usb_maxpacket(dev, pipe) << 16) | /* MPS */ + (1 << 14) | + QH_ENDPT1_EPS(ehci_encode_speed(dev->speed)) | + (usb_pipeendpoint(pipe) << 8) | /* Endpoint Number */ + (usb_pipedevice(pipe) << 0)); + qh->qh_endpt2 = cpu_to_hc32((1 << 30) | /* 1 Tx per mframe */ + (1 << 0)); /* S-mask: microframe 0 */ + if (dev->speed == USB_SPEED_LOW || + dev->speed == USB_SPEED_FULL) { + /* C-mask: microframes 2-4 */ + qh->qh_endpt2 |= cpu_to_hc32((0x1c << 8)); + } + ehci_update_endpt2_dev_n_port(dev, qh); + + td->qt_next = cpu_to_hc32(QT_NEXT_TERMINATE); + td->qt_altnext = cpu_to_hc32(QT_NEXT_TERMINATE); + debug("communication direction is '%s'\n", + usb_pipein(pipe) ? "in" : "out"); + td->qt_token = cpu_to_hc32( + QT_TOKEN_DT(toggle) | + (elementsize << 16) | + ((usb_pipein(pipe) ? 1 : 0) << 8) | /* IN/OUT token */ + 0x80); /* active */ + td->qt_buffer[0] = + cpu_to_hc32((unsigned long)buffer + i * elementsize); + td->qt_buffer[1] = + cpu_to_hc32((td->qt_buffer[0] + 0x1000) & ~0xfff); + td->qt_buffer[2] = + cpu_to_hc32((td->qt_buffer[0] + 0x2000) & ~0xfff); + td->qt_buffer[3] = + cpu_to_hc32((td->qt_buffer[0] + 0x3000) & ~0xfff); + td->qt_buffer[4] = + cpu_to_hc32((td->qt_buffer[0] + 0x4000) & ~0xfff); + + *buf = buffer + i * elementsize; + toggle ^= 1; + } + + if (ehci->periodic_schedules > 0) { + if (disable_periodic(ehci) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } + } + + /* hook up to periodic list */ + result->last->qh_link = list->qh_link; + list->qh_link = cpu_to_hc32((unsigned long)result->first | QH_LINK_TYPE_QH); + + if (enable_periodic(ehci) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto fail3; + } + ehci->periodic_schedules++; + + debug("Exit create_int_queue\n"); + return result; +fail3: + if (result->tds) + free(result->tds); +fail2: + if (result->first) + free(result->first); + if (result) + free(result); +fail1: + return NULL; +} + +static void *ehci_poll_int_queue(struct usb_device *dev, + struct int_queue *queue) +{ + struct QH *cur = queue->current; + struct qTD *cur_td; + uint32_t token, toggle; + unsigned long pipe = queue->pipe; + + /* depleted queue */ + if (cur == NULL) { + debug("Exit poll_int_queue with completed queue\n"); + return NULL; + } + /* still active */ + cur_td = &queue->tds[queue->current - queue->first]; + token = hc32_to_cpu(cur_td->qt_token); + if (QT_TOKEN_GET_STATUS(token) & QT_TOKEN_STATUS_ACTIVE) { + debug("Exit poll_int_queue with no completed intr transfer. token is %x\n", token); + return NULL; + } + + toggle = QT_TOKEN_GET_DT(token); + usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), toggle); + + if (!(cur->qh_link & QH_LINK_TERMINATE)) + queue->current++; + else + queue->current = NULL; + + debug("Exit poll_int_queue with completed intr transfer. token is %x at %p (first at %p)\n", + token, cur, queue->first); + return cur->buffer; +} + +static int ehci_destroy_int_queue(struct usb_device *dev, + struct int_queue *queue) +{ + int result = -1; + struct usb_host *host = dev->host; + struct ehci_priv *ehci = to_ehci(host); + struct QH *cur = ehci->periodic_queue; + uint64_t start; + + if (disable_periodic(ehci) < 0) { + debug("FATAL: periodic should never fail, but did"); + goto out; + } + ehci->periodic_schedules--; + + start = get_time_ns(); + while (!(cur->qh_link & cpu_to_hc32(QH_LINK_TERMINATE))) { + debug("considering %p, with qh_link %x\n", cur, cur->qh_link); + if (NEXT_QH(cur) == queue->first) { + debug("found candidate. removing from chain\n"); + cur->qh_link = queue->last->qh_link; + result = 0; + break; + } + cur = NEXT_QH(cur); + if (is_timeout_non_interruptible(start, 500 * MSECOND)) { + printf("Timeout destroying interrupt endpoint queue\n"); + result = -1; + goto out; + } + } + + if (ehci->periodic_schedules > 0) { + result = enable_periodic(ehci); + if (result < 0) + debug("FATAL: periodic should never fail, but did"); + } + +out: + free(queue->tds); + free(queue->first); + free(queue); + + return result; +} + +static int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, int length, int interval) { struct usb_host *host = dev->host; struct ehci_priv *ehci = to_ehci(host); + struct int_queue *queue; + uint64_t start; + void *backbuffer; + int result = 0, ret; dev_dbg(ehci->dev, "dev=%p, pipe=%lu, buffer=%p, length=%d, interval=%d", dev, pipe, buffer, length, interval); - return -1; + + queue = ehci_create_int_queue(dev, pipe, 1, length, buffer, interval); + if (!queue) + return -1; + + start = get_time_ns(); + while ((backbuffer = ehci_poll_int_queue(dev, queue)) == NULL) + if (is_timeout_non_interruptible(start, + USB_CNTL_TIMEOUT * MSECOND)) { + pr_err("Timeout poll on interrupt endpoint\n"); + result = -ETIMEDOUT; + break; + } + + if (backbuffer != buffer) { + pr_err("got wrong buffer back (%p instead of %p)\n", + backbuffer, buffer); + return -EINVAL; + } + + ret = ehci_destroy_int_queue(dev, queue); + if (ret < 0) + return ret; + + /* everything worked out fine */ + return result; } static int ehci_detect(struct device_d *dev) @@ -914,6 +1336,8 @@ int ehci_register(struct device_d *dev, struct ehci_data *data) ehci->qh_list = dma_alloc_coherent(sizeof(struct QH) * NUM_TD, DMA_ADDRESS_BROKEN); + ehci->periodic_queue = dma_alloc_coherent(sizeof(struct QH), + DMA_ADDRESS_BROKEN); ehci->td = dma_alloc_coherent(sizeof(struct qTD) * NUM_TD, DMA_ADDRESS_BROKEN); diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index d71d056..39de763 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -20,6 +20,15 @@ #include +#define QH_ENDPT1_EPS(x) (((x) & 0x3) << 12) /* Endpoint Speed */ +#define QH_ENDPT2_PORTNUM(x) (((x) & 0x7f) << 23) /* Port Number */ +#define QH_ENDPT2_HUBADDR(x) (((x) & 0x7f) << 16) /* Hub Address */ + +#define QT_TOKEN_DT(x) (((x) & 0x1) << 31) /* Data Toggle */ +#define QT_TOKEN_GET_STATUS(x) (((x) >> 0) & 0xff) +#define QT_TOKEN_STATUS_ACTIVE 0x80 +#define QT_TOKEN_GET_DT(x) (((x) >> 31) & 0x1) + #if !defined(CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS) #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 16 #endif @@ -51,6 +60,7 @@ struct ehci_hcor { #define CMD_RUN (1 << 0) /* start/stop HC */ uint32_t or_usbsts; #define STD_ASS (1 << 15) +#define STS_PSS (1 << 14) #define STS_HALT (1 << 12) uint32_t or_usbintr; uint32_t or_frindex; @@ -148,7 +158,10 @@ struct QH { * Add dummy fill value to make the size of this struct * aligned to 32 bytes */ - uint8_t fill[16]; + union { + uint8_t fill[16]; + void* buffer; + }; }; #endif /* USB_EHCI_H */ -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox