From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Subject: [RFC v2 07/10] gpio: add ath79-gpio driver for Atheros MIPS SoCs
Date: Mon, 21 Sep 2015 02:23:50 +0300 [thread overview]
Message-ID: <1442791433-10892-8-git-send-email-antonynpavlov@gmail.com> (raw)
In-Reply-To: <1442791433-10892-1-git-send-email-antonynpavlov@gmail.com>
This driver is based on linux-4.2 driver.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-ath79.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 147 insertions(+)
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 1d94661..f39e8da 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -1,6 +1,7 @@
obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_74164) += gpio-74164.o
+obj-$(CONFIG_MACH_MIPS_ATH79) += gpio-ath79.o
obj-$(CONFIG_GPIO_BCM2835) += gpio-bcm2835.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
diff --git a/drivers/gpio/gpio-ath79.c b/drivers/gpio/gpio-ath79.c
new file mode 100644
index 0000000..353b520
--- /dev/null
+++ b/drivers/gpio/gpio-ath79.c
@@ -0,0 +1,146 @@
+/*
+ * Atheros AR71XX/AR724X/AR913X GPIO API support
+ *
+ * Copyright (C) 2010-2011 Jaiganesh Narayanan <jnarayanan@atheros.com>
+ * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (C) 2015 Antony Pavlov <antonynpavlov@gmail.com>
+ *
+ * Parts of this file are based on Atheros' 2.6.15/2.6.31 BSP
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <init.h>
+#include <io.h>
+#include <gpio.h>
+#include <malloc.h>
+
+#include <mach/ar71xx_regs.h>
+#include <mach/ath79.h>
+
+static void __iomem *ath79_gpio_base;
+static u32 ath79_gpio_count;
+
+static void __ath79_gpio_set_value(unsigned gpio, int value)
+{
+ void __iomem *base = ath79_gpio_base;
+
+ if (value)
+ __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_SET);
+ else
+ __raw_writel(1 << gpio, base + AR71XX_GPIO_REG_CLEAR);
+}
+
+static int __ath79_gpio_get_value(unsigned gpio)
+{
+ return (__raw_readl(ath79_gpio_base + AR71XX_GPIO_REG_IN) >> gpio) & 1;
+}
+
+static int ath79_gpio_get_value(struct gpio_chip *chip, unsigned offset)
+{
+ return __ath79_gpio_get_value(offset);
+}
+
+static void ath79_gpio_set_value(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ __ath79_gpio_set_value(offset, value);
+}
+
+static int ath79_gpio_direction_input(struct gpio_chip *chip,
+ unsigned offset)
+{
+ void __iomem *base = ath79_gpio_base;
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << offset),
+ base + AR71XX_GPIO_REG_OE);
+
+ return 0;
+}
+
+static int ath79_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = ath79_gpio_base;
+
+ if (value)
+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_SET);
+ else
+ __raw_writel(1 << offset, base + AR71XX_GPIO_REG_CLEAR);
+
+ __raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) | (1 << offset),
+ base + AR71XX_GPIO_REG_OE);
+
+ return 0;
+}
+
+static struct gpio_ops ath79_gpio_ops = {
+ .get = ath79_gpio_get_value,
+ .set = ath79_gpio_set_value,
+ .direction_input = ath79_gpio_direction_input,
+ .direction_output = ath79_gpio_direction_output,
+};
+
+static struct gpio_chip ath79_gpio_chip = {
+ .ops = &ath79_gpio_ops,
+ .base = 0,
+};
+
+static const struct of_device_id ath79_gpio_of_match[] = {
+ { .compatible = "qca,ar7100-gpio" },
+ {},
+};
+
+static int ath79_gpio_probe(struct device_d *dev)
+{
+ struct device_node *np = dev->device_node;
+ int err;
+
+ if (!np) {
+ dev_err(dev, "No DT node or platform data found\n");
+ return -EINVAL;
+ }
+
+ err = of_property_read_u32(np, "ngpios", &ath79_gpio_count);
+ if (err) {
+ dev_err(dev, "ngpios property is not valid\n");
+ return err;
+ }
+ if (ath79_gpio_count >= 32) {
+ dev_err(dev, "ngpios must be less than 32\n");
+ return -EINVAL;
+ }
+
+ ath79_gpio_base = dev_request_mem_region(dev, 0);
+ if (IS_ERR(ath79_gpio_base)) {
+ dev_err(dev, "could not get memory region\n");
+ return PTR_ERR(ath79_gpio_base);
+ }
+
+ ath79_gpio_chip.dev = dev;
+ ath79_gpio_chip.ngpio = ath79_gpio_count;
+
+ err = gpiochip_add(&ath79_gpio_chip);
+ if (err) {
+ dev_err(dev, "cannot add AR71xx GPIO chip, error=%d", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static struct driver_d ath79_gpio_driver = {
+ .name = "ath79-gpio",
+ .probe = ath79_gpio_probe,
+ .of_compatible = DRV_OF_COMPAT(ath79_gpio_of_match),
+};
+
+static int ath79_gpio_init(void)
+{
+ return platform_driver_register(&ath79_gpio_driver);
+}
+coredevice_initcall(ath79_gpio_init);
--
2.5.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-09-20 23:24 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-20 23:23 [RFC v2 00/10] MIPS: barebox as a first stage loader on the Black Swift board Antony Pavlov
2015-09-20 23:23 ` [RFC v2 01/10] MIPS: ar933x: pbl: add pbl_ar9331_pll macro Antony Pavlov
2015-09-20 23:23 ` [RFC v2 02/10] MIPS: ar933x: pbl: add pbl_ar9331_ddr2_config macro Antony Pavlov
2015-09-20 23:23 ` [RFC v2 03/10] MIPS: mach-ath79: add pbl_ar9331_uart_enable macro Antony Pavlov
2015-09-20 23:23 ` [RFC v2 04/10] MIPS: mach-ath79: add debug_ll_ar9331_init macro Antony Pavlov
2015-09-20 23:23 ` [RFC v2 05/10] MIPS: ath79: add black-swift board support Antony Pavlov
2015-09-20 23:23 ` [RFC v2 06/10] MIPS: add black-swift_defconfig Antony Pavlov
2015-09-20 23:23 ` Antony Pavlov [this message]
2015-09-20 23:23 ` [RFC v2 08/10] MIPS: ath79: use gpiolib Antony Pavlov
2015-09-20 23:23 ` [RFC v2 09/10] MIPS: dts: ar9331.dtsi: add gpio Antony Pavlov
2015-09-20 23:23 ` [RFC v2 10/10] WIP: MIPS: black-swift: use GPIO Antony Pavlov
2015-09-23 4:53 ` [RFC v2 00/10] MIPS: barebox as a first stage loader on the Black Swift board Sascha Hauer
2015-09-23 6:11 ` Antony Pavlov
2015-09-23 8:32 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1442791433-10892-8-git-send-email-antonynpavlov@gmail.com \
--to=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox