From: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
barebox@lists.infradead.org
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>,
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Subject: [PATCH v2 13/19] mtd: nand_mrvl_nfc: Add hwflags to distinguish different HW versions
Date: Fri, 20 Nov 2015 20:36:06 +0100 [thread overview]
Message-ID: <1448048172-10080-14-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
In-Reply-To: <1448048172-10080-1-git-send-email-sebastian.hesselbarth@gmail.com>
Marvell PXA3xx NAND flash controller IP has been reused in later SoCs
with additional HW features. Add HW BCH ECC as the first known HW
difference.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr>
---
drivers/mtd/nand/nand_mrvl_nfc.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/mtd/nand/nand_mrvl_nfc.c b/drivers/mtd/nand/nand_mrvl_nfc.c
index 217aacd7201a..ac1cb3fa9ae3 100644
--- a/drivers/mtd/nand/nand_mrvl_nfc.c
+++ b/drivers/mtd/nand/nand_mrvl_nfc.c
@@ -129,6 +129,10 @@
#define nand_readsl(host, off, buf, nbbytes) \
readsl((host)->mmio_base + (off), buf, nbbytes)
+struct mrvl_nand_variant {
+ unsigned int hwflags;
+};
+
struct mrvl_nand_host {
struct mtd_info mtd;
struct nand_chip chip;
@@ -142,6 +146,8 @@ struct mrvl_nand_host {
size_t read_id_bytes;
void __iomem *mmio_base;
+ unsigned int hwflags;
+#define HWFLAGS_ECC_BCH BIT(0)
unsigned int buf_start;
unsigned int buf_count;
@@ -235,9 +241,14 @@ static struct nand_ecclayout ecc_layout_2KB_hwecc = {
#define mtd_info_to_host(mtd) ((struct mrvl_nand_host *) \
(((struct nand_chip *)((mtd)->priv))->priv))
+static const struct mrvl_nand_variant pxa3xx_variant = {
+ .hwflags = 0,
+};
+
static struct of_device_id mrvl_nand_dt_ids[] = {
{
.compatible = "marvell,pxa3xx-nand",
+ .data = &pxa3xx_variant,
},
{}
};
@@ -1006,10 +1017,17 @@ static struct mrvl_nand_host *alloc_nand_resource(struct device_d *dev)
static int mrvl_nand_probe_dt(struct mrvl_nand_host *host)
{
struct device_node *np = host->dev->device_node;
+ const struct of_device_id *match;
+ const struct mrvl_nand_variant *variant;
if (!IS_ENABLED(CONFIG_OFTREE) || host->dev->platform_data)
return 0;
+ match = of_match_node(mrvl_nand_dt_ids, np);
+ if (!match)
+ return -EINVAL;
+ variant = match->data;
+
if (of_get_property(np, "marvell,nand-keep-config", NULL))
host->keep_config = 1;
of_property_read_u32(np, "num-cs", &host->num_cs);
@@ -1024,6 +1042,8 @@ static int mrvl_nand_probe_dt(struct mrvl_nand_host *host)
if (host->ecc_step < 0)
host->ecc_step = 0;
+ host->hwflags = variant->hwflags;
+
return 0;
}
--
2.1.4
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2015-11-20 19:36 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-20 19:35 [PATCH v2 00/19] Armada 370/XP NAND driver Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 01/19] of: mtd: Import of_get_nand_ecc_{step_size, strength} from Linux Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 02/19] mtd: nand: Clarify Marvell Orion Kconfig prompt Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 03/19] arm: pxa: Prepare for NAND clkdev lookup on PXA3xx Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 04/19] arm: pxa: Add clock for Zylonite NFC Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 05/19] mtd: nand_mrvl_nfc: Use common clock for core clock Sebastian Hesselbarth
2015-11-20 19:35 ` [PATCH v2 06/19] arm: pxa: Remove pxa_get_nandclk() Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 07/19] mtd: nand_mrvl_nfc: Clear OOB data with 0xff instead of 0x00 Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 08/19] mtd: nand_mrvl_nfc: Use Auto Read Status on program/erase Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 09/19] mtd: nand_mrvl_nfc: Protect mrvl_nand_probe_dt Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 10/19] mtd: nand_mrvl_nfc: Fix num-cs property parsing Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 11/19] mtd: nand_mrvl_nfc: Get ecc parameters from DT Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 12/19] mtd: nand_mrvl_nfc: Prepare for different HW ECC strengths Sebastian Hesselbarth
2015-11-20 20:38 ` Trent Piepho
2015-11-23 7:18 ` Sascha Hauer
2015-11-20 19:36 ` Sebastian Hesselbarth [this message]
2015-11-20 19:36 ` [PATCH v2 14/19] mtd: nand_mrvl_nfc: Add support for 4bit BCH HW ECC Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 15/19] mtd: nand_mrvl_nfc: Add support for 8bit " Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 16/19] mtd: nand_mrvl_nfc: Add support for HW BCH ECC Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 17/19] mtd: nand_mrvl_nfc: Add support for NDCB3 register Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 18/19] mtd: nand_mrvl_nfc: Add support for Marvell Armada 370/XP Sebastian Hesselbarth
2015-11-20 19:36 ` [PATCH v2 19/19] mtd: nand_mrvl_nfc: Add optimized timings for Samsung K9K8G08U Sebastian Hesselbarth
2015-11-23 7:19 ` [PATCH v2 00/19] Armada 370/XP NAND driver Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1448048172-10080-14-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=ezequiel@vanguardiasur.com.ar \
--cc=thomas.petazzoni@free-electrons.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox