[PATCH 7/7] arm: bcm283x: add rpi2 support

[Alexander Aring <alex.aring@gmail.com>]

This patch adds Raspberry Pi 2 support in barebox. The features should
be the same like the current RPi status in barebox.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 arch/arm/Kconfig                              |   5 +
 arch/arm/boards/Makefile                      |   2 +-
 arch/arm/boards/raspberry-pi/Makefile         |   2 +
 arch/arm/boards/raspberry-pi/rpi-common.c     | 294 ++++++++++++++++++++++++++
 arch/arm/boards/raspberry-pi/rpi.c            | 292 +------------------------
 arch/arm/boards/raspberry-pi/rpi.h            |  28 +++
 arch/arm/boards/raspberry-pi/rpi2.c           |  21 ++
 arch/arm/configs/rpi2_defconfig               |  72 +++++++
 arch/arm/mach-bcm283x/Kconfig                 |   9 +
 arch/arm/mach-bcm283x/include/mach/mbox.h     |   9 +-
 arch/arm/mach-bcm283x/include/mach/platform.h |   9 +
 11 files changed, 453 insertions(+), 290 deletions(-)
 create mode 100644 arch/arm/boards/raspberry-pi/rpi-common.c
 create mode 100644 arch/arm/boards/raspberry-pi/rpi.h
 create mode 100644 arch/arm/boards/raspberry-pi/rpi2.c
 create mode 100644 arch/arm/configs/rpi2_defconfig

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 4e7c1fd..71d4336 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -64,6 +64,11 @@ config ARCH_BCM2835
 	select ARCH_BCM283X
 	select CPU_ARM1176
 
+config ARCH_BCM2836
+	bool "Broadcom BCM2836 boards"
+	select ARCH_BCM283X
+	select CPU_V7
+
 config ARCH_CLPS711X
 	bool "Cirrus Logic EP711x/EP721x/EP731x"
 	select CLKDEV_LOOKUP
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index 2e58f15..1029e8f 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -95,7 +95,7 @@ obj-$(CONFIG_MACH_QIL_A9260)			+= qil-a926x/
 obj-$(CONFIG_MACH_QIL_A9G20)			+= qil-a926x/
 obj-$(CONFIG_MACH_RADXA_ROCK)			+= radxa-rock/
 obj-$(CONFIG_MACH_REALQ7)			+= datamodul-edm-qmx6/
-obj-$(CONFIG_MACH_RPI)				+= raspberry-pi/
+obj-$(CONFIG_MACH_RPI_COMMON)			+= raspberry-pi/
 obj-$(CONFIG_MACH_SABRELITE)			+= freescale-mx6-sabrelite/
 obj-$(CONFIG_MACH_SABRESD)			+= freescale-mx6-sabresd/
 obj-$(CONFIG_MACH_FREESCALE_IMX6SX_SABRESDB)	+= freescale-mx6sx-sabresdb/
diff --git a/arch/arm/boards/raspberry-pi/Makefile b/arch/arm/boards/raspberry-pi/Makefile
index 978383a..7a3d7de 100644
--- a/arch/arm/boards/raspberry-pi/Makefile
+++ b/arch/arm/boards/raspberry-pi/Makefile
@@ -1,2 +1,4 @@
+obj-$(CONFIG_MACH_RPI_COMMON) += rpi-common.o
 obj-$(CONFIG_MACH_RPI) += rpi.o
+obj-$(CONFIG_MACH_RPI2) += rpi2.o
 lwl-y += lowlevel.o
diff --git a/arch/arm/boards/raspberry-pi/rpi-common.c b/arch/arm/boards/raspberry-pi/rpi-common.c
new file mode 100644
index 0000000..0e17587
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi-common.c
@@ -0,0 +1,294 @@
+/*
+ * Copyright (C) 2009 Carlo Caione <carlo@carlocaione.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <init.h>
+#include <fs.h>
+#include <linux/stat.h>
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <envfs.h>
+#include <malloc.h>
+#include <gpio.h>
+#include <net.h>
+#include <led.h>
+#include <asm/armlinux.h>
+#include <generated/mach-types.h>
+
+#include <mach/core.h>
+#include <mach/mbox.h>
+
+#include "rpi.h"
+
+struct msg_get_arm_mem {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
+	u32 end_tag;
+};
+
+struct msg_get_clock_rate {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
+	u32 end_tag;
+};
+
+struct msg_get_board_rev {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_board_rev get_board_rev;
+	u32 end_tag;
+};
+
+struct msg_get_mac_address {
+	struct bcm2835_mbox_hdr hdr;
+	struct bcm2835_mbox_tag_get_mac_address get_mac_address;
+	u32 end_tag;
+};
+
+static int rpi_get_arm_mem(u32 *size)
+{
+	BCM2835_MBOX_STACK_ALIGN(struct msg_get_arm_mem, msg);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg);
+	BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+	if (ret)
+		return ret;
+
+	*size = msg->get_arm_mem.body.resp.mem_size;
+
+	return 0;
+}
+
+static int rpi_register_clkdev(u32 clock_id, const char *name)
+{
+	BCM2835_MBOX_STACK_ALIGN(struct msg_get_clock_rate, msg);
+	struct clk *clk;
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg);
+	BCM2835_MBOX_INIT_TAG(&msg->get_clock_rate, GET_CLOCK_RATE);
+	msg->get_clock_rate.body.req.clock_id = clock_id;
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+	if (ret)
+		return ret;
+
+	clk = clk_fixed(name, msg->get_clock_rate.body.resp.rate_hz);
+	if (IS_ERR(clk))
+		return PTR_ERR(clk);
+
+	if (!clk_register_clkdev(clk, NULL, name))
+		return -ENODEV;
+
+	return 0;
+}
+
+void rpi_set_usbethaddr(void)
+{
+	BCM2835_MBOX_STACK_ALIGN(struct msg_get_mac_address, msg);
+	int ret;
+
+	BCM2835_MBOX_INIT_HDR(msg);
+	BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query MAC address\n");
+		/* Ignore error; not critical */
+		return;
+	}
+
+	eth_register_ethaddr(0, msg->get_mac_address.body.resp.mac);
+}
+
+struct gpio_led rpi_leds[] = {
+	{
+		.gpio	= -EINVAL,
+		.led	= {
+			.name = "ACT",
+		},
+	}, {
+		.gpio	= -EINVAL,
+		.led	= {
+			.name = "PWR",
+		},
+	},
+};
+
+void rpi_add_led(void)
+{
+	int i;
+	struct gpio_led *l;
+
+	for (i = 0; i < ARRAY_SIZE(rpi_leds); i++) {
+		l = &rpi_leds[i];
+
+		if (gpio_is_valid(l->gpio))
+			led_gpio_register(l);
+	}
+
+	l = &rpi_leds[0];
+	if (gpio_is_valid(l->gpio))
+		led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
+}
+
+void rpi_b_plus_init(void)
+{
+	rpi_leds[0].gpio = 47;
+	rpi_leds[1].gpio = 35;
+	rpi_set_usbethaddr();
+}
+
+static int rpi_board_rev = 0;
+
+static void rpi_get_board_rev(void)
+{
+	int ret;
+	char *name;
+
+	BCM2835_MBOX_STACK_ALIGN(struct msg_get_board_rev, msg);
+	BCM2835_MBOX_INIT_HDR(msg);
+	BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
+
+	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
+	if (ret) {
+		printf("bcm2835: Could not query board revision\n");
+		/* Ignore error; not critical */
+		return;
+	}
+
+	/* Comments from u-boot:
+	 * For details of old-vs-new scheme, see:
+	 * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
+	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
+	 * (a few posts down)
+	 *
+	 * For the RPi 1, bit 24 is the "warranty bit", so we mask off just the
+	 * lower byte to use as the board rev:
+	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250
+	 * http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594
+	 */
+	rpi_board_rev = msg->get_board_rev.body.resp.rev;
+	if (rpi_board_rev & 0x800000)
+		rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
+	else
+		rpi_board_rev &= 0xff;
+	if (rpi_board_rev >= rpi_models_size) {
+		printf("RPI: Board rev %u outside known range\n",
+		       rpi_board_rev);
+		goto unknown_rev;
+	}
+
+	if (!rpi_models[rpi_board_rev].name) {
+		printf("RPI: Board rev %u unknown\n", rpi_board_rev);
+		goto unknown_rev;
+	}
+
+	if (!rpi_board_rev)
+		goto unknown_rev;
+
+	name = asprintf("RaspberryPi %s %s", rpi_models[rpi_board_rev].name,
+			rpi_model_string);
+	barebox_set_model(name);
+	free(name);
+
+	return;
+
+unknown_rev:
+	rpi_board_rev = 0;
+	name = asprintf("RaspberryPi %s", rpi_model_string);
+	barebox_set_model(name);
+	free(name);
+}
+
+static void rpi_model_init(void)
+{
+	if (!rpi_models[rpi_board_rev].init)
+		return;
+
+	rpi_models[rpi_board_rev].init();
+	rpi_add_led();
+}
+
+static int rpi_mem_init(void)
+{
+	u32 size = 0;
+	int ret;
+
+	ret = rpi_get_arm_mem(&size);
+	if (ret)
+		printf("could not query ARM memory size\n");
+
+	bcm2835_add_device_sdram(size);
+
+	return ret;
+}
+mem_initcall(rpi_mem_init);
+
+static int rpi_console_init(void)
+{
+	rpi_get_board_rev();
+	barebox_set_hostname("rpi");
+
+	bcm2835_register_uart();
+	return 0;
+}
+console_initcall(rpi_console_init);
+
+static int rpi_clock_init(void)
+{
+	rpi_register_clkdev(BCM2835_MBOX_CLOCK_ID_EMMC, "bcm2835_mci0");
+	return 0;
+}
+postconsole_initcall(rpi_clock_init);
+
+static int rpi_env_init(void)
+{
+	struct stat s;
+	const char *diskdev = "/dev/disk0.0";
+	int ret;
+
+	device_detect_by_name("mci0");
+
+	ret = stat(diskdev, &s);
+	if (ret) {
+		printf("no %s. using default env\n", diskdev);
+		return 0;
+	}
+
+	mkdir("/boot", 0666);
+	ret = mount(diskdev, "fat", "/boot", NULL);
+	if (ret) {
+		printf("failed to mount %s\n", diskdev);
+		return 0;
+	}
+
+	default_environment_path_set("/boot/barebox.env");
+
+	return 0;
+}
+
+static int rpi_devices_init(void)
+{
+	rpi_model_init();
+	bcm2835_register_mci();
+	bcm2835_register_fb();
+	armlinux_set_architecture(MACH_TYPE_BCM2708);
+	rpi_env_init();
+	return 0;
+}
+late_initcall(rpi_devices_init);
diff --git a/arch/arm/boards/raspberry-pi/rpi.c b/arch/arm/boards/raspberry-pi/rpi.c
index faf48a5..dd2ad7f 100644
--- a/arch/arm/boards/raspberry-pi/rpi.c
+++ b/arch/arm/boards/raspberry-pi/rpi.c
@@ -13,161 +13,17 @@
  *
  */
 
-#include <common.h>
-#include <init.h>
-#include <fs.h>
-#include <linux/stat.h>
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <envfs.h>
-#include <malloc.h>
-#include <gpio.h>
-#include <net.h>
-#include <led.h>
-#include <asm/armlinux.h>
-#include <generated/mach-types.h>
-
-#include <mach/core.h>
-#include <mach/mbox.h>
-
-struct msg_get_arm_mem {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_get_arm_mem get_arm_mem;
-	u32 end_tag;
-};
-
-struct msg_get_clock_rate {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_get_clock_rate get_clock_rate;
-	u32 end_tag;
-};
-
-struct msg_get_board_rev {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_get_board_rev get_board_rev;
-	u32 end_tag;
-};
-
-struct msg_get_mac_address {
-	struct bcm2835_mbox_hdr hdr;
-	struct bcm2835_mbox_tag_get_mac_address get_mac_address;
-	u32 end_tag;
-};
-
-static int rpi_get_arm_mem(u32 *size)
-{
-	BCM2835_MBOX_STACK_ALIGN(struct msg_get_arm_mem, msg);
-	int ret;
-
-	BCM2835_MBOX_INIT_HDR(msg);
-	BCM2835_MBOX_INIT_TAG(&msg->get_arm_mem, GET_ARM_MEMORY);
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
-	if (ret)
-		return ret;
-
-	*size = msg->get_arm_mem.body.resp.mem_size;
-
-	return 0;
-}
-
-static int rpi_register_clkdev(u32 clock_id, const char *name)
-{
-	BCM2835_MBOX_STACK_ALIGN(struct msg_get_clock_rate, msg);
-	struct clk *clk;
-	int ret;
-
-	BCM2835_MBOX_INIT_HDR(msg);
-	BCM2835_MBOX_INIT_TAG(&msg->get_clock_rate, GET_CLOCK_RATE);
-	msg->get_clock_rate.body.req.clock_id = clock_id;
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
-	if (ret)
-		return ret;
-
-	clk = clk_fixed(name, msg->get_clock_rate.body.resp.rate_hz);
-	if (IS_ERR(clk))
-		return PTR_ERR(clk);
-
-	if (!clk_register_clkdev(clk, NULL, name))
-		return -ENODEV;
-
-	return 0;
-}
-
-static void rpi_set_usbethaddr(void)
-{
-	BCM2835_MBOX_STACK_ALIGN(struct msg_get_mac_address, msg);
-	int ret;
-
-	BCM2835_MBOX_INIT_HDR(msg);
-	BCM2835_MBOX_INIT_TAG(&msg->get_mac_address, GET_MAC_ADDRESS);
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
-	if (ret) {
-		printf("bcm2835: Could not query MAC address\n");
-		/* Ignore error; not critical */
-		return;
-	}
-
-	eth_register_ethaddr(0, msg->get_mac_address.body.resp.mac);
-}
-
-static struct gpio_led leds[] = {
-	{
-		.gpio	= -EINVAL,
-		.led	= {
-			.name = "ACT",
-		},
-	}, {
-		.gpio	= -EINVAL,
-		.led	= {
-			.name = "PWR",
-		},
-	},
-};
-
-static void rpi_add_led(void)
-{
-	int i;
-	struct gpio_led *l;
-
-	for (i = 0; i < ARRAY_SIZE(leds); i++) {
-		l = &leds[i];
-
-		if (gpio_is_valid(l->gpio))
-			led_gpio_register(l);
-	}
-
-	l = &leds[0];
-	if (gpio_is_valid(l->gpio))
-		led_set_trigger(LED_TRIGGER_HEARTBEAT, &l->led);
-}
-
-static void rpi_b_plus_init(void)
-{
-	leds[0].gpio = 47;
-	leds[1].gpio = 35;
-	rpi_set_usbethaddr();
-}
+#include "rpi.h"
 
 static void rpi_b_init(void)
 {
-	leds[0].gpio = 16;
-	leds[0].active_low = 1;
+	rpi_leds[0].gpio = 16;
+	rpi_leds[0].active_low = 1;
 	rpi_set_usbethaddr();
 }
 
-#define RPI_MODEL(_id, _name, _init)	\
-	[_id] = {				\
-		.name			= _name,\
-		.init			= _init,\
-	}
 /* See comments in mbox.h for data source */
-static const struct {
-	const char *name;
-	void (*init)(void);
-} models[] = {
+const struct rpi_model rpi_models[] = {
 	RPI_MODEL(0, "Unknown model", NULL),
 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_2, "Model B (no P5)", rpi_b_init),
 	RPI_MODEL(BCM2835_BOARD_REV_B_I2C0_3, "Model B (no P5)", rpi_b_init),
@@ -184,141 +40,5 @@ static const struct {
 	RPI_MODEL(BCM2835_BOARD_REV_CM, "Compute Module", NULL),
 	RPI_MODEL(BCM2835_BOARD_REV_A_PLUS, "Model A+", NULL),
 };
-
-static int rpi_board_rev = 0;
-
-static void rpi_get_board_rev(void)
-{
-	int ret;
-	char *name;
-
-	BCM2835_MBOX_STACK_ALIGN(struct msg_get_board_rev, msg);
-	BCM2835_MBOX_INIT_HDR(msg);
-	BCM2835_MBOX_INIT_TAG(&msg->get_board_rev, GET_BOARD_REV);
-
-	ret = bcm2835_mbox_call_prop(BCM2835_MBOX_PROP_CHAN, &msg->hdr);
-	if (ret) {
-		printf("bcm2835: Could not query board revision\n");
-		/* Ignore error; not critical */
-		return;
-	}
-
-	/* Comments from u-boot:
-	 * For details of old-vs-new scheme, see:
-	 * https://github.com/pimoroni/RPi.version/blob/master/RPi/version.py
-	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=99293&p=690282
-	 * (a few posts down)
-	 *
-	 * For the RPi 1, bit 24 is the "warranty bit", so we mask off just the
-	 * lower byte to use as the board rev:
-	 * http://www.raspberrypi.org/forums/viewtopic.php?f=63&t=98367&start=250
-	 * http://www.raspberrypi.org/forums/viewtopic.php?f=31&t=20594
-	 */
-	rpi_board_rev = msg->get_board_rev.body.resp.rev;
-	if (rpi_board_rev & 0x800000)
-		rpi_board_rev = (rpi_board_rev >> 4) & 0xff;
-	else
-		rpi_board_rev &= 0xff;
-	if (rpi_board_rev >= ARRAY_SIZE(models)) {
-		printf("RPI: Board rev %u outside known range\n",
-		       rpi_board_rev);
-		goto unknown_rev;
-	}
-
-	if (!models[rpi_board_rev].name) {
-		printf("RPI: Board rev %u unknown\n", rpi_board_rev);
-		goto unknown_rev;
-	}
-
-	if (!rpi_board_rev)
-		goto unknown_rev;
-
-	name = asprintf("RaspberryPi %s (BCM2835/ARM1176JZF-S)",
-			models[rpi_board_rev].name);
-	barebox_set_model(name);
-	free(name);
-
-	return;
-
-unknown_rev:
-	rpi_board_rev = 0;
-	barebox_set_model("RaspberryPi (BCM2835/ARM1176JZF-S)");
-}
-
-static void rpi_model_init(void)
-{
-	if (!models[rpi_board_rev].init)
-		return;
-
-	models[rpi_board_rev].init();
-	rpi_add_led();
-}
-
-static int rpi_mem_init(void)
-{
-	u32 size = 0;
-	int ret;
-
-	ret = rpi_get_arm_mem(&size);
-	if (ret)
-		printf("could not query ARM memory size\n");
-
-	bcm2835_add_device_sdram(size);
-
-	return ret;
-}
-mem_initcall(rpi_mem_init);
-
-static int rpi_console_init(void)
-{
-	rpi_get_board_rev();
-	barebox_set_hostname("rpi");
-
-	bcm2835_register_uart();
-	return 0;
-}
-console_initcall(rpi_console_init);
-
-static int rpi_clock_init(void)
-{
-	rpi_register_clkdev(BCM2835_MBOX_CLOCK_ID_EMMC, "bcm2835_mci0");
-	return 0;
-}
-postconsole_initcall(rpi_clock_init);
-
-static int rpi_env_init(void)
-{
-	struct stat s;
-	const char *diskdev = "/dev/disk0.0";
-	int ret;
-
-	device_detect_by_name("mci0");
-
-	ret = stat(diskdev, &s);
-	if (ret) {
-		printf("no %s. using default env\n", diskdev);
-		return 0;
-	}
-
-	mkdir("/boot", 0666);
-	ret = mount(diskdev, "fat", "/boot", NULL);
-	if (ret) {
-		printf("failed to mount %s\n", diskdev);
-		return 0;
-	}
-
-	default_environment_path_set("/boot/barebox.env");
-
-	return 0;
-}
-
-static int rpi_devices_init(void)
-{
-	rpi_model_init();
-	bcm2835_register_mci();
-	bcm2835_register_fb();
-	armlinux_set_architecture(MACH_TYPE_BCM2708);
-	rpi_env_init();
-	return 0;
-}
-late_initcall(rpi_devices_init);
+const size_t rpi_models_size = ARRAY_SIZE(rpi_models);
+const char *rpi_model_string = "(BCM2835/ARM1176JZF-S)";
diff --git a/arch/arm/boards/raspberry-pi/rpi.h b/arch/arm/boards/raspberry-pi/rpi.h
new file mode 100644
index 0000000..739cdee
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi.h
@@ -0,0 +1,28 @@
+#ifndef __ARCH_ARM_BOARDS_RPI_H__
+#define __ARCH_ARM_BOARDS_RPI_H__
+
+#include <types.h>
+#include <led.h>
+
+#include <mach/mbox.h>
+
+#define RPI_MODEL(_id, _name, _init)	\
+	[_id] = {				\
+		.name			= _name,\
+		.init			= _init,\
+	}
+
+struct rpi_model {
+	const char *name;
+	void (*init)(void);
+};
+
+extern const struct rpi_model rpi_models[];
+extern const size_t rpi_models_size;
+extern const char *rpi_model_string;
+extern struct gpio_led rpi_leds[];
+
+void rpi_b_plus_init(void);
+void rpi_set_usbethaddr(void);
+
+#endif /* __ARCH_ARM_BOARDS_RPI_H__ */
diff --git a/arch/arm/boards/raspberry-pi/rpi2.c b/arch/arm/boards/raspberry-pi/rpi2.c
new file mode 100644
index 0000000..2cfc06f
--- /dev/null
+++ b/arch/arm/boards/raspberry-pi/rpi2.c
@@ -0,0 +1,21 @@
+/*
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include "rpi.h"
+
+const struct rpi_model rpi_models[] = {
+	RPI_MODEL(0, "Unknown model", NULL),
+	RPI_MODEL(BCM2836_BOARD_REV_2_B, "2 Model B", rpi_b_plus_init),
+};
+const size_t rpi_models_size = ARRAY_SIZE(rpi_models);
+const char *rpi_model_string = "(BCM2836/CORTEX-A7)";
diff --git a/arch/arm/configs/rpi2_defconfig b/arch/arm/configs/rpi2_defconfig
new file mode 100644
index 0000000..81f821a
--- /dev/null
+++ b/arch/arm/configs/rpi2_defconfig
@@ -0,0 +1,72 @@
+CONFIG_ARCH_BCM2836=y
+CONFIG_AEABI=y
+CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
+CONFIG_ARM_UNWIND=y
+CONFIG_MMU=y
+CONFIG_MALLOC_TLSF=y
+CONFIG_KALLSYMS=y
+CONFIG_PROMPT="R-Pi> "
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+CONFIG_MENU=y
+CONFIG_BLSPEC=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/raspberry-pi/env"
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_BOOTM_SHOW_TYPE=y
+CONFIG_CMD_BOOTM_VERBOSE=y
+CONFIG_CMD_BOOTM_INITRD=y
+CONFIG_CMD_BOOTM_OFTREE=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADB=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_RESET=y
+CONFIG_CMD_UIMAGE=y
+CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
+CONFIG_CMD_MAGICVAR=y
+CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_FILETYPE=y
+CONFIG_CMD_LN=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_UNCOMPRESS=y
+CONFIG_CMD_LET=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_LOGIN=y
+CONFIG_CMD_MENU=y
+CONFIG_CMD_MENU_MANAGEMENT=y
+CONFIG_CMD_PASSWD=y
+CONFIG_CMD_READLINE=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_DETECT=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_OF_NODE=y
+CONFIG_CMD_OF_PROPERTY=y
+CONFIG_CMD_OFTREE=y
+CONFIG_CMD_TIME=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_MCI=y
+CONFIG_MCI_BCM283X=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_GPIO_BCM283X=y
+CONFIG_REGULATOR=y
+CONFIG_FS_EXT4=y
+CONFIG_FS_FAT=y
+CONFIG_FS_FAT_WRITE=y
+CONFIG_FS_FAT_LFN=y
+CONFIG_DIGEST_SHA1_GENERIC=y
+CONFIG_DIGEST_SHA256_GENERIC=y
diff --git a/arch/arm/mach-bcm283x/Kconfig b/arch/arm/mach-bcm283x/Kconfig
index f4a7e67..e861268 100644
--- a/arch/arm/mach-bcm283x/Kconfig
+++ b/arch/arm/mach-bcm283x/Kconfig
@@ -4,12 +4,21 @@ config ARCH_TEXT_BASE
 	hex
 	default 0x04000000
 
+config MACH_RPI_COMMON
+	bool
+
 choice
 	prompt "Broadcom Board type"
 
 config MACH_RPI
 	bool "RaspberryPi (BCM2835/ARM1176JZF-S)"
 	depends on ARCH_BCM2835
+	select MACH_RPI_COMMON
+
+config MACH_RPI2
+	bool "RaspberryPi 2 (BCM2836/CORTEX-A7)"
+	depends on ARCH_BCM2836
+	select MACH_RPI_COMMON
 
 endchoice
 
diff --git a/arch/arm/mach-bcm283x/include/mach/mbox.h b/arch/arm/mach-bcm283x/include/mach/mbox.h
index 09b31f2..cd9ee1f 100644
--- a/arch/arm/mach-bcm283x/include/mach/mbox.h
+++ b/arch/arm/mach-bcm283x/include/mach/mbox.h
@@ -11,6 +11,8 @@
 
 #include <common.h>
 
+#include <mach/platform.h>
+
 /*
  * The BCM2835 SoC contains (at least) two CPUs; the VideoCore (a/k/a "GPU")
  * and the ARM CPU. The ARM CPU is often thought of as the main CPU.
@@ -40,7 +42,7 @@
 
 /* Raw mailbox HW */
 
-#define BCM2835_MBOX_PHYSADDR	0x2000b880
+#define BCM2835_MBOX_PHYSADDR		(BCM2835_ARM_BASE + 0x880)
 
 struct bcm2835_mbox_regs {
 	u32 read;
@@ -73,8 +75,6 @@ struct bcm2835_mbox_hdr {
 #define BCM2835_MBOX_REQ_CODE		0
 #define BCM2835_MBOX_RESP_CODE_SUCCESS	0x80000000
 
-#define BCM2835_CACHELINE_SIZE		32
-
 #define BCM2835_MBOX_STACK_ALIGN(type, name) \
 	STACK_ALIGN_ARRAY(type, name, 1, BCM2835_CACHELINE_SIZE)
 
@@ -128,6 +128,9 @@ struct bcm2835_mbox_tag_hdr {
 
 #define BCM2835_MBOX_TAG_GET_BOARD_REV	0x00010002
 
+/* RPi 2 */
+#define BCM2836_BOARD_REV_2_B		0x4
+
 /*
  * 0x2..0xf from:
  * http://raspberryalphaomega.org.uk/2013/02/06/automatic-raspberry-pi-board-revision-detection-model-a-b1-and-b2/
diff --git a/arch/arm/mach-bcm283x/include/mach/platform.h b/arch/arm/mach-bcm283x/include/mach/platform.h
index e55085a..3b73831 100644
--- a/arch/arm/mach-bcm283x/include/mach/platform.h
+++ b/arch/arm/mach-bcm283x/include/mach/platform.h
@@ -28,7 +28,16 @@
  * This file is manually generated.
  */
 
+#ifdef CONFIG_ARCH_BCM2835
 #define BCM2835_PERI_BASE	0x20000000
+#define BCM2835_CACHELINE_SIZE	32
+#elif defined CONFIG_ARCH_BCM2836
+#define BCM2835_PERI_BASE	0x3f000000
+#define BCM2835_CACHELINE_SIZE	64
+#else
+#error "no CONFIG_ARCH_BCM283X defined"
+#endif
+
 #define BCM2835_ST_BASE		(BCM2835_PERI_BASE + 0x3000)	/* System Timer */
 #define BCM2835_DMA_BASE	(BCM2835_PERI_BASE + 0x7000)	/* DMA controller */
 #define BCM2835_ARM_BASE	(BCM2835_PERI_BASE + 0xB000)	/* BCM2708 ARM control block */
-- 
2.6.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox