From: Philipp Zabel <p.zabel@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 2/6] net: phy: micrel: use BIT macro
Date: Tue, 2 Feb 2016 12:17:31 +0100 [thread overview]
Message-ID: <1454411855-4839-2-git-send-email-p.zabel@pengutronix.de> (raw)
In-Reply-To: <1454411855-4839-1-git-send-email-p.zabel@pengutronix.de>
Based on kernel commit 00aee095000c ("net: phy: micrel: use BIT macro")
by Johan Hovold <johan@kernel.org>.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
drivers/net/phy/micrel.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c
index 2f31906..0c97e25 100644
--- a/drivers/net/phy/micrel.c
+++ b/drivers/net/phy/micrel.c
@@ -25,17 +25,17 @@
/* Operation Mode Strap Override */
#define MII_KSZPHY_OMSO 0x16
-#define KSZPHY_OMSO_B_CAST_OFF (1 << 9)
-#define KSZPHY_OMSO_RMII_OVERRIDE (1 << 1)
-#define KSZPHY_OMSO_MII_OVERRIDE (1 << 0)
+#define KSZPHY_OMSO_B_CAST_OFF BIT(9)
+#define KSZPHY_OMSO_RMII_OVERRIDE BIT(1)
+#define KSZPHY_OMSO_MII_OVERRIDE BIT(0)
/* general PHY control reg in vendor specific block. */
#define MII_KSZPHY_CTRL 0x1F
/* bitmap of PHY register to set interrupt mode */
-#define KSZPHY_CTRL_INT_ACTIVE_HIGH (1 << 9)
-#define KSZ9021_CTRL_INT_ACTIVE_HIGH (1 << 14)
-#define KS8737_CTRL_INT_ACTIVE_HIGH (1 << 14)
-#define KSZ8051_RMII_50MHZ_CLK (1 << 7)
+#define KSZPHY_CTRL_INT_ACTIVE_HIGH BIT(9)
+#define KSZ9021_CTRL_INT_ACTIVE_HIGH BIT(14)
+#define KS8737_CTRL_INT_ACTIVE_HIGH BIT(14)
+#define KSZ8051_RMII_50MHZ_CLK BIT(7)
/* Write/read to/from extended registers */
#define MII_KSZPHY_EXTREG 0x0b
@@ -231,8 +231,8 @@ static int ksz9031_config_init(struct phy_device *phydev)
}
#define KSZ8873MLL_GLOBAL_CONTROL_4 0x06
-#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX (1 << 6)
-#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED (1 << 4)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_DUPLEX BIT(6)
+#define KSZ8873MLL_GLOBAL_CONTROL_4_SPEED BIT(4)
static int ksz8873mll_read_status(struct phy_device *phydev)
{
int regval;
--
2.7.0.rc3
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-02-02 11:18 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-02 11:17 [PATCH 1/6] net: phy: micrel: Staticise ksz8873mll_read_status() Philipp Zabel
2016-02-02 11:17 ` Philipp Zabel [this message]
2016-02-02 11:17 ` [PATCH 3/6] net: phy: micrel: Be more const correct Philipp Zabel
2016-02-02 11:17 ` [PATCH 4/6] net: phy: micrel: Center FLP timing at 16ms Philipp Zabel
2016-02-02 11:17 ` [PATCH 5/6] net: phy: micrel: Add workaround for bad autoneg Philipp Zabel
2016-02-02 11:17 ` [PATCH 6/6] net: phy: micrel: errata for KSZ9031 Philipp Zabel
2016-02-02 14:42 ` Philipp Zabel
2016-02-03 7:39 ` [PATCH 1/6] net: phy: micrel: Staticise ksz8873mll_read_status() Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1454411855-4839-2-git-send-email-p.zabel@pengutronix.de \
--to=p.zabel@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox