mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 07/34] imx: hab: rename driver dir to hab/
Date: Tue,  2 Feb 2016 15:47:50 +0100	[thread overview]
Message-ID: <1454424497-7157-8-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1454424497-7157-1-git-send-email-s.hauer@pengutronix.de>

There's not only HABv4 but also HABv3. No need to put the corresponding
code in separate directories, so rename the habv4 directory to hab.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig |   5 +
 drivers/Makefile          |   2 +-
 drivers/hab/Makefile      |   1 +
 drivers/hab/habv4.c       | 237 ++++++++++++++++++++++++++++++++++++++++++++++
 drivers/habv4/Makefile    |   1 -
 drivers/habv4/habv4.c     | 237 ----------------------------------------------
 include/hab.h             |  30 ++++++
 include/habv4.h           |  30 ------
 8 files changed, 274 insertions(+), 269 deletions(-)
 create mode 100644 drivers/hab/Makefile
 create mode 100644 drivers/hab/habv4.c
 delete mode 100644 drivers/habv4/Makefile
 delete mode 100644 drivers/habv4/habv4.c
 create mode 100644 include/hab.h
 delete mode 100644 include/habv4.h

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index c713e50..c5ac90f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -695,8 +695,12 @@ config IMX_OCOTP_WRITE
 		mw -l -d /dev/imx-ocotp 0x8C 0x00001234
 		mw -l -d /dev/imx-ocotp 0x88 0x56789ABC
 
+config HAB
+	bool
+
 config HABV4
 	tristate "HABv4 support"
+	select HAB
 	depends on ARCH_IMX6
 	help
 	  High Assurance Boot, as found on i.MX28/i.MX6.
@@ -737,6 +741,7 @@ endif
 
 config HABV3
 	tristate "HABv3 support"
+	select HAB
 	depends on ARCH_IMX25
 	help
 	  High Assurance Boot, as found on i.MX25.
diff --git a/drivers/Makefile b/drivers/Makefile
index 3afbb61..8a8c8c4 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -30,4 +30,4 @@ obj-$(CONFIG_PCI) += pci/
 obj-y += rtc/
 obj-$(CONFIG_FIRMWARE) += firmware/
 obj-$(CONFIG_GENERIC_PHY) += phy/
-obj-$(CONFIG_HABV4) += habv4/
+obj-$(CONFIG_HAB) += hab/
diff --git a/drivers/hab/Makefile b/drivers/hab/Makefile
new file mode 100644
index 0000000..5c3b00c
--- /dev/null
+++ b/drivers/hab/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_HABV4) += habv4.o
diff --git a/drivers/hab/habv4.c b/drivers/hab/habv4.c
new file mode 100644
index 0000000..8521b88
--- /dev/null
+++ b/drivers/hab/habv4.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt)  "HABv4: " fmt
+
+#include <common.h>
+#include <hab.h>
+#include <types.h>
+
+#include <mach/generic.h>
+
+#define HABV4_RVT_IMX28 0xffff8af8
+#define HABV4_RVT_IMX6 0x00000094
+
+enum hab_tag {
+	HAB_TAG_IVT = 0xd1,		/* Image Vector Table */
+	HAB_TAG_DCD = 0xd2,		/* Device Configuration Data */
+	HAB_TAG_CSF = 0xd4,		/* Command Sequence File */
+	HAB_TAG_CRT = 0xd7, 		/* Certificate */
+	HAB_TAG_SIG = 0xd8,		/* Signature */
+	HAB_TAG_EVT = 0xdb,		/* Event */
+	HAB_TAG_RVT = 0xdd,		/* ROM Vector Table */
+	HAB_TAG_WRP = 0x81,		/* Wrapped Key */
+	HAB_TAG_MAC = 0xac,		/* Message Authentication Code */
+};
+
+/* Status definitions */
+enum hab_status {
+	HAB_STATUS_ANY = 0x00,		/* Match any status in report_event */
+	HAB_STATUS_FAILURE = 0x33,	/* Operation failed */
+	HAB_STATUS_WARNING = 0x69,	/* Operation completed with warning */
+	HAB_STATUS_SUCCESS = 0xf0,	/* Operation completed successfully */
+};
+
+/* Security Configuration definitions */
+enum hab_config {
+	HAB_CONFIG_FAB = 0x00,		/* Un-programmed IC */
+	HAB_CONFIG_RETURN = 0x33,	/* Field Return IC */
+	HAB_CONFIG_OPEN = 0xf0,		/* Non-secure IC */
+	HAB_CONFIG_CLOSED = 0xcc,	/* Secure IC */
+};
+
+/* State definitions */
+enum hab_state {
+	HAB_STATE_INITIAL = 0x33,	/* Initialising state (transitory) */
+	HAB_STATE_CHECK = 0x55,		/* Check state (non-secure) */
+	HAB_STATE_NONSECURE = 0x66,	/* Non-secure state */
+	HAB_STATE_TRUSTED = 0x99,	/* Trusted state */
+	HAB_STATE_SECURE = 0xaa,	/* Secure state */
+	HAB_STATE_FAIL_SOFT = 0xcc,	/* Soft fail state */
+	HAB_STATE_FAIL_HARD = 0xff,	/* Hard fail state (terminal) */
+	HAB_STATE_NONE = 0xf0,		/* No security state machine */
+};
+
+enum hab_target {
+	HAB_TARGET_MEMORY = 0x0f,	/* Check memory white list */
+	HAB_TARGET_PERIPHERAL = 0xf0,	/* Check peripheral white list*/
+	HAB_TARGET_ANY = 0x55,		/* Check memory & peripheral white list */
+};
+
+enum hab_assertion {
+	HAB_ASSERTION_BLOCK = 0x0,	/* Check if memory is authenticated after CSF */
+};
+
+struct hab_header {
+	uint8_t tag;
+	uint16_t len;			/* len including the header */
+	uint8_t par;
+} __packed;
+
+typedef enum hab_status hab_loader_callback_fn(void **start, uint32_t *bytes, const void *boot_data);
+
+struct habv4_rvt {
+	struct hab_header header;
+	enum hab_status (*entry)(void);
+	enum hab_status (*exit)(void);
+	enum hab_status (*check_target)(enum hab_target target, const void *start, uint32_t bytes);
+	void *(*authenticate_image)(uint8_t cid, uint32_t ivt_offset, void **start, uint32_t *bytes, hab_loader_callback_fn *loader);
+	enum hab_status (*run_dcd)(const void *dcd);
+	enum hab_status (*run_csf)(const void *csf, uint8_t cid);
+	enum hab_status (*assert)(enum hab_assertion assertion, const void *data, uint32_t count);
+	enum hab_status (*report_event)(enum hab_status status, uint32_t index, void *event, uint32_t *bytes);
+	enum hab_status (*report_status)(enum hab_config *config, enum hab_state *state);
+	void (*failsafe)(void);
+} __packed;
+
+static const struct habv4_rvt *__rvt;
+
+static inline const struct habv4_rvt *habv4_get_rvt(void)
+{
+	if (__rvt)
+		return __rvt;
+
+	if (cpu_is_mx28())
+		__rvt = (void *)HABV4_RVT_IMX28;
+	else if (cpu_is_mx6())
+		__rvt = (void *)HABV4_RVT_IMX6;
+
+	if (__rvt->header.tag != HAB_TAG_RVT) {
+		pr_err("ERROR - RVT not found!\n");
+		return NULL;
+	}
+
+	pr_info("Found RVT v%d.%d\n", __rvt->header.par >> 4,
+		__rvt->header.par & 0xf);
+
+	return __rvt;
+}
+
+static const char *habv4_get_status_str(enum hab_status status)
+{
+	switch (status) {
+	case HAB_STATUS_ANY:
+		return "Match any status in report_event"; break;
+	case HAB_STATUS_FAILURE:
+		return "Operation failed"; break;
+	case HAB_STATUS_WARNING:
+		return "Operation completed with warning"; break;
+	case HAB_STATUS_SUCCESS:
+		return "Operation completed successfully"; break;
+	}
+
+	return "<unknown>";
+}
+
+static const char *habv4_get_config_str(enum hab_config config)
+{
+	switch (config) {
+	case HAB_CONFIG_FAB:
+		return "Un-programmed IC"; break;
+	case HAB_CONFIG_RETURN:
+		return "Field Return IC"; break;
+	case HAB_CONFIG_OPEN:
+		return "Non-secure IC"; break;
+	case HAB_CONFIG_CLOSED:
+		return "Secure IC"; break;
+	}
+
+	return "<unknown>";
+}
+
+static const char *habv4_get_state_str(enum hab_state state)
+{
+	switch (state) {
+	case HAB_STATE_INITIAL:
+		return "Initialising state (transitory)"; break;
+	case HAB_STATE_CHECK:
+		return "Check state (non-secure)"; break;
+	case HAB_STATE_NONSECURE:
+		return "Non-secure state"; break;
+	case HAB_STATE_TRUSTED:
+		return "Trusted state"; break;
+	case HAB_STATE_SECURE:
+		return "Secure state"; break;
+	case HAB_STATE_FAIL_SOFT:
+		return "Soft fail state"; break;
+	case HAB_STATE_FAIL_HARD:
+		return "Hard fail state (terminal)"; break;
+	case HAB_STATE_NONE:
+		return "No security state machine"; break;
+	}
+
+	return "<unknown>";
+}
+
+static void habv4_display_event(uint8_t *data, uint32_t len)
+{
+	unsigned int i;
+
+	if (data && len) {
+		for (i = 0; i < len; i++) {
+			if (i == 0)
+				printf(" %02x", data[i]);
+			else if ((i % 8) == 0)
+				printf("\n %02x", data[i]);
+			else if ((i % 4) == 0)
+				printf("  %02x", data[i]);
+			else
+				printf(" %02x", data[i]);
+		}
+	}
+	printf("\n\n");
+}
+
+int habv4_get_status(void)
+{
+	const struct habv4_rvt *rvt = habv4_get_rvt();
+	uint8_t data[256];
+	uint32_t len = sizeof(data);
+	uint32_t index = 0;
+	enum hab_status status;
+	enum hab_config config = 0x0;
+	enum hab_state state = 0x0;
+
+	if (!rvt)
+		return -ENODEV;
+
+	status = rvt->report_status(&config, &state);
+	pr_info("Status: %s (0x%02x)\n", habv4_get_status_str(status), status);
+	pr_info("Config: %s (0x%02x)\n", habv4_get_config_str(config), config);
+	pr_info("State: %s (0x%02x)\n",	habv4_get_state_str(state), state);
+
+	if (status == HAB_STATUS_SUCCESS) {
+		pr_info("No HAB Failure Events Found!\n\n");
+		return 0;
+	}
+
+	while (rvt->report_event(HAB_STATUS_FAILURE, index, data, &len) == HAB_STATUS_SUCCESS) {
+		printf("-------- HAB Event %d --------\n"
+		       "event data:\n", index);
+
+		habv4_display_event(data, len);
+		len = sizeof(data);
+		index++;
+	}
+
+	/* Check reason for stopping */
+	if (rvt->report_event(HAB_STATUS_ANY, index, NULL, &len) == HAB_STATUS_SUCCESS)
+		pr_err("ERROR: Recompile with larger event data buffer (at least %d bytes)\n\n", len);
+
+	return -EPERM;
+}
diff --git a/drivers/habv4/Makefile b/drivers/habv4/Makefile
deleted file mode 100644
index 40b3253..0000000
--- a/drivers/habv4/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y += habv4.o
diff --git a/drivers/habv4/habv4.c b/drivers/habv4/habv4.c
deleted file mode 100644
index 5ace0de..0000000
--- a/drivers/habv4/habv4.c
+++ /dev/null
@@ -1,237 +0,0 @@
-/*
- * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt)  "HABv4: " fmt
-
-#include <common.h>
-#include <habv4.h>
-#include <types.h>
-
-#include <mach/generic.h>
-
-#define HABV4_RVT_IMX28 0xffff8af8
-#define HABV4_RVT_IMX6 0x00000094
-
-enum hab_tag {
-	HAB_TAG_IVT = 0xd1,		/* Image Vector Table */
-	HAB_TAG_DCD = 0xd2,		/* Device Configuration Data */
-	HAB_TAG_CSF = 0xd4,		/* Command Sequence File */
-	HAB_TAG_CRT = 0xd7, 		/* Certificate */
-	HAB_TAG_SIG = 0xd8,		/* Signature */
-	HAB_TAG_EVT = 0xdb,		/* Event */
-	HAB_TAG_RVT = 0xdd,		/* ROM Vector Table */
-	HAB_TAG_WRP = 0x81,		/* Wrapped Key */
-	HAB_TAG_MAC = 0xac,		/* Message Authentication Code */
-};
-
-/* Status definitions */
-enum hab_status {
-	HAB_STATUS_ANY = 0x00,		/* Match any status in report_event */
-	HAB_STATUS_FAILURE = 0x33,	/* Operation failed */
-	HAB_STATUS_WARNING = 0x69,	/* Operation completed with warning */
-	HAB_STATUS_SUCCESS = 0xf0,	/* Operation completed successfully */
-};
-
-/* Security Configuration definitions */
-enum hab_config {
-	HAB_CONFIG_FAB = 0x00,		/* Un-programmed IC */
-	HAB_CONFIG_RETURN = 0x33,	/* Field Return IC */
-	HAB_CONFIG_OPEN = 0xf0,		/* Non-secure IC */
-	HAB_CONFIG_CLOSED = 0xcc,	/* Secure IC */
-};
-
-/* State definitions */
-enum hab_state {
-	HAB_STATE_INITIAL = 0x33,	/* Initialising state (transitory) */
-	HAB_STATE_CHECK = 0x55,		/* Check state (non-secure) */
-	HAB_STATE_NONSECURE = 0x66,	/* Non-secure state */
-	HAB_STATE_TRUSTED = 0x99,	/* Trusted state */
-	HAB_STATE_SECURE = 0xaa,	/* Secure state */
-	HAB_STATE_FAIL_SOFT = 0xcc,	/* Soft fail state */
-	HAB_STATE_FAIL_HARD = 0xff,	/* Hard fail state (terminal) */
-	HAB_STATE_NONE = 0xf0,		/* No security state machine */
-};
-
-enum hab_target {
-	HAB_TARGET_MEMORY = 0x0f,	/* Check memory white list */
-	HAB_TARGET_PERIPHERAL = 0xf0,	/* Check peripheral white list*/
-	HAB_TARGET_ANY = 0x55,		/* Check memory & peripheral white list */
-};
-
-enum hab_assertion {
-	HAB_ASSERTION_BLOCK = 0x0,	/* Check if memory is authenticated after CSF */
-};
-
-struct hab_header {
-	uint8_t tag;
-	uint16_t len;			/* len including the header */
-	uint8_t par;
-} __packed;
-
-typedef enum hab_status hab_loader_callback_fn(void **start, uint32_t *bytes, const void *boot_data);
-
-struct habv4_rvt {
-	struct hab_header header;
-	enum hab_status (*entry)(void);
-	enum hab_status (*exit)(void);
-	enum hab_status (*check_target)(enum hab_target target, const void *start, uint32_t bytes);
-	void *(*authenticate_image)(uint8_t cid, uint32_t ivt_offset, void **start, uint32_t *bytes, hab_loader_callback_fn *loader);
-	enum hab_status (*run_dcd)(const void *dcd);
-	enum hab_status (*run_csf)(const void *csf, uint8_t cid);
-	enum hab_status (*assert)(enum hab_assertion assertion, const void *data, uint32_t count);
-	enum hab_status (*report_event)(enum hab_status status, uint32_t index, void *event, uint32_t *bytes);
-	enum hab_status (*report_status)(enum hab_config *config, enum hab_state *state);
-	void (*failsafe)(void);
-} __packed;
-
-static const struct habv4_rvt *__rvt;
-
-static inline const struct habv4_rvt *habv4_get_rvt(void)
-{
-	if (__rvt)
-		return __rvt;
-
-	if (cpu_is_mx28())
-		__rvt = (void *)HABV4_RVT_IMX28;
-	else if (cpu_is_mx6())
-		__rvt = (void *)HABV4_RVT_IMX6;
-
-	if (__rvt->header.tag != HAB_TAG_RVT) {
-		pr_err("ERROR - RVT not found!\n");
-		return NULL;
-	}
-
-	pr_info("Found RVT v%d.%d\n", __rvt->header.par >> 4,
-		__rvt->header.par & 0xf);
-
-	return __rvt;
-}
-
-static const char *habv4_get_status_str(enum hab_status status)
-{
-	switch (status) {
-	case HAB_STATUS_ANY:
-		return "Match any status in report_event"; break;
-	case HAB_STATUS_FAILURE:
-		return "Operation failed"; break;
-	case HAB_STATUS_WARNING:
-		return "Operation completed with warning"; break;
-	case HAB_STATUS_SUCCESS:
-		return "Operation completed successfully"; break;
-	}
-
-	return "<unknown>";
-}
-
-static const char *habv4_get_config_str(enum hab_config config)
-{
-	switch (config) {
-	case HAB_CONFIG_FAB:
-		return "Un-programmed IC"; break;
-	case HAB_CONFIG_RETURN:
-		return "Field Return IC"; break;
-	case HAB_CONFIG_OPEN:
-		return "Non-secure IC"; break;
-	case HAB_CONFIG_CLOSED:
-		return "Secure IC"; break;
-	}
-
-	return "<unknown>";
-}
-
-static const char *habv4_get_state_str(enum hab_state state)
-{
-	switch (state) {
-	case HAB_STATE_INITIAL:
-		return "Initialising state (transitory)"; break;
-	case HAB_STATE_CHECK:
-		return "Check state (non-secure)"; break;
-	case HAB_STATE_NONSECURE:
-		return "Non-secure state"; break;
-	case HAB_STATE_TRUSTED:
-		return "Trusted state"; break;
-	case HAB_STATE_SECURE:
-		return "Secure state"; break;
-	case HAB_STATE_FAIL_SOFT:
-		return "Soft fail state"; break;
-	case HAB_STATE_FAIL_HARD:
-		return "Hard fail state (terminal)"; break;
-	case HAB_STATE_NONE:
-		return "No security state machine"; break;
-	}
-
-	return "<unknown>";
-}
-
-static void habv4_display_event(uint8_t *data, uint32_t len)
-{
-	unsigned int i;
-
-	if (data && len) {
-		for (i = 0; i < len; i++) {
-			if (i == 0)
-				printf(" %02x", data[i]);
-			else if ((i % 8) == 0)
-				printf("\n %02x", data[i]);
-			else if ((i % 4) == 0)
-				printf("  %02x", data[i]);
-			else
-				printf(" %02x", data[i]);
-		}
-	}
-	printf("\n\n");
-}
-
-int habv4_get_status(void)
-{
-	const struct habv4_rvt *rvt = habv4_get_rvt();
-	uint8_t data[256];
-	uint32_t len = sizeof(data);
-	uint32_t index = 0;
-	enum hab_status status;
-	enum hab_config config = 0x0;
-	enum hab_state state = 0x0;
-
-	if (!rvt)
-		return -ENODEV;
-
-	status = rvt->report_status(&config, &state);
-	pr_info("Status: %s (0x%02x)\n", habv4_get_status_str(status), status);
-	pr_info("Config: %s (0x%02x)\n", habv4_get_config_str(config), config);
-	pr_info("State: %s (0x%02x)\n",	habv4_get_state_str(state), state);
-
-	if (status == HAB_STATUS_SUCCESS) {
-		pr_info("No HAB Failure Events Found!\n\n");
-		return 0;
-	}
-
-	while (rvt->report_event(HAB_STATUS_FAILURE, index, data, &len) == HAB_STATUS_SUCCESS) {
-		printf("-------- HAB Event %d --------\n"
-		       "event data:\n", index);
-
-		habv4_display_event(data, len);
-		len = sizeof(data);
-		index++;
-	}
-
-	/* Check reason for stopping */
-	if (rvt->report_event(HAB_STATUS_ANY, index, NULL, &len) == HAB_STATUS_SUCCESS)
-		pr_err("ERROR: Recompile with larger event data buffer (at least %d bytes)\n\n", len);
-
-	return -EPERM;
-}
diff --git a/include/hab.h b/include/hab.h
new file mode 100644
index 0000000..f9bf74f
--- /dev/null
+++ b/include/hab.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __HABV4_H
+#define __HABV4_H
+
+#ifdef CONFIG_HABV4
+int habv4_get_status(void);
+#else
+static inline int habv4_get_status(void)
+{
+	return -EPERM;
+}
+#endif
+
+#endif /* __HABV4_H */
diff --git a/include/habv4.h b/include/habv4.h
deleted file mode 100644
index f9bf74f..0000000
--- a/include/habv4.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
- * Copyright (C) 2014, 2015 Marc Kleine-Budde <mkl@pengutronix.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef __HABV4_H
-#define __HABV4_H
-
-#ifdef CONFIG_HABV4
-int habv4_get_status(void);
-#else
-static inline int habv4_get_status(void)
-{
-	return -EPERM;
-}
-#endif
-
-#endif /* __HABV4_H */
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-02-02 14:48 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-02 14:47 [PATCH v2] i.MX HABv4 rework and HABv3 support Sascha Hauer
2016-02-02 14:47 ` [PATCH 01/34] scripts: Add common header files for tools Sascha Hauer
2016-02-02 14:47 ` [PATCH 02/34] scripts/include: Add ARRAY_SIZE Sascha Hauer
2016-02-02 14:47 ` [PATCH 03/34] scripts: Add scripts/include to host compiler includes Sascha Hauer
2016-02-02 14:47 ` [PATCH 04/34] scripts: imx: Use Kernel includes Sascha Hauer
2016-02-02 14:47 ` [PATCH 05/34] scripts: mxs: " Sascha Hauer
2016-02-02 14:47 ` [PATCH 06/34] ARM: i.MX: Add HABv3 Kconfig variables Sascha Hauer
2016-02-02 14:47 ` Sascha Hauer [this message]
2016-02-02 14:47 ` [PATCH 08/34] hab: Add HABv3 status report function Sascha Hauer
2016-02-02 14:47 ` [PATCH 09/34] scripts: imx-usb-loader: Make readonly arguments const Sascha Hauer
2016-02-02 14:47 ` [PATCH 10/34] scripts: imx-usb-loader: Move definitions up Sascha Hauer
2016-02-02 14:47 ` [PATCH 11/34] scripts: imx-image: Allow dcd offset 0x0 Sascha Hauer
2016-02-02 14:47 ` [PATCH 12/34] scripts: imx-usb-loader: fully read images into memory Sascha Hauer
2016-02-02 14:47 ` [PATCH 13/34] scripts: imx-usb-loader: Move load_file up Sascha Hauer
2016-02-02 14:47 ` [PATCH 14/34] scripts: imx: Consolidate flash headers in imx tools Sascha Hauer
2016-02-02 14:47 ` [PATCH 15/34] scripts: imx-image: Add context struct to config parsers Sascha Hauer
2016-02-02 14:47 ` [PATCH 16/34] scripts: imx-image: move write_mem to context data Sascha Hauer
2016-02-02 14:48 ` [PATCH 17/34] scripts: imx-image: move check " Sascha Hauer
2016-02-02 14:48 ` [PATCH 18/34] scripts: imx: move config file parser to separate file Sascha Hauer
2016-02-02 14:48 ` [PATCH 19/34] scripts: imx: make libusb variables global Sascha Hauer
2016-02-02 14:48 ` [PATCH 20/34] scripts: imx-usb-loader: Add -s and -i options Sascha Hauer
2016-02-02 14:48 ` [PATCH 21/34] scripts: imx: Drop double check Sascha Hauer
2016-02-02 14:48 ` [PATCH 22/34] scripts: imx-image: move more variables to context data Sascha Hauer
2016-02-02 14:48 ` [PATCH 23/34] scripts: imx-image: pass config data to add_header_* Sascha Hauer
2016-02-02 14:48 ` [PATCH 24/34] scripts: imx-image: Support adding a Super Root Key to the image Sascha Hauer
2016-02-02 14:48 ` [PATCH 25/34] scripts: imx: Create CSF files from imx config file Sascha Hauer
2016-02-02 14:48 ` [PATCH 26/34] scripts: imx: Allow to create signed images Sascha Hauer
2016-02-02 14:48 ` [PATCH 27/34] scripts: imx: Generate signed images with imx-image Sascha Hauer
2016-02-02 14:48 ` [PATCH 28/34] scripts: imx-usb-loader: Use dcd len to invalidate dcd data Sascha Hauer
2016-02-02 14:48 ` [PATCH 29/34] scripts: imx-image: Factor out a read_file function Sascha Hauer
2016-02-02 14:48 ` [PATCH 30/34] scripts: imx-image: Allow to create HAB signed images suitable for USB upload Sascha Hauer
2016-02-02 14:48 ` [PATCH 31/34] Make: i.MX: Allow to pass config file to cmd_imx_image Sascha Hauer
2016-02-02 14:48 ` [PATCH 32/34] images: imx: Add targets for signed images and signed usb images Sascha Hauer
2016-02-02 14:48 ` [PATCH 33/34] scripts: imx-usb-loader: Do not zero out boot_data_ptr Sascha Hauer
2016-02-02 14:48 ` [PATCH 34/34] imx: hab: Make hab status functions SoC specific Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1454424497-7157-8-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox