mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/5] Documentation: booting linux: improve wording
@ 2016-02-09 16:01 Robert Schwebel
  2016-02-09 16:01 ` [PATCH 2/5] Documentation: m25p80: include in documentation Robert Schwebel
                   ` (4 more replies)
  0 siblings, 5 replies; 6+ messages in thread
From: Robert Schwebel @ 2016-02-09 16:01 UTC (permalink / raw)
  To: barebox

'bootm' is the lowlevel boot command, in contrast to 'boot', which is
more highlevel.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 Documentation/user/booting-linux.rst | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/Documentation/user/booting-linux.rst b/Documentation/user/booting-linux.rst
index 5b021f0..98628fa 100644
--- a/Documentation/user/booting-linux.rst
+++ b/Documentation/user/booting-linux.rst
@@ -6,7 +6,7 @@ Booting Linux
 Introduction
 ------------
 
-The basic boot command in barebox is :ref:`command_bootm`. This command
+The lowlevel boot command in barebox is :ref:`command_bootm`. This command
 can be used directly, but there is also a :ref:`command_boot` command
 which offers additional features like a boot sequence which tries to
 boot different entries until one succeeds.
@@ -14,7 +14,7 @@ boot different entries until one succeeds.
 The bootm command
 -----------------
 
-The :ref:`command_bootm` command is the basic boot command. Depending on the
+The :ref:`command_bootm` command is the lowlevel boot command. Depending on the
 architecture the bootm command handles different image types. On ARM the
 following images are supported:
 
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 2/5] Documentation: m25p80: include in documentation
  2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
@ 2016-02-09 16:01 ` Robert Schwebel
  2016-02-09 16:01 ` [PATCH 3/5] Documentation: user manual: include documentation for remote-control Robert Schwebel
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Robert Schwebel @ 2016-02-09 16:01 UTC (permalink / raw)
  To: barebox

Fix this warning:

checking consistency...  [...]Documentation/devicetree/bindings/mtd/m25p80.rst:: WARNING: document isn't included in any toctree

by including the document.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 Documentation/devicetree/index.rst | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/index.rst b/Documentation/devicetree/index.rst
index abb9088..c5992c0 100644
--- a/Documentation/devicetree/index.rst
+++ b/Documentation/devicetree/index.rst
@@ -11,3 +11,4 @@ Contents:
    bindings/barebox/*
    bindings/leds/*
    bindings/misc/*
+   bindings/mtd/*
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 3/5] Documentation: user manual: include documentation for remote-control
  2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
  2016-02-09 16:01 ` [PATCH 2/5] Documentation: m25p80: include in documentation Robert Schwebel
@ 2016-02-09 16:01 ` Robert Schwebel
  2016-02-09 16:01 ` [PATCH 4/5] ratp: remove unused ratp_close command Robert Schwebel
                   ` (2 subsequent siblings)
  4 siblings, 0 replies; 6+ messages in thread
From: Robert Schwebel @ 2016-02-09 16:01 UTC (permalink / raw)
  To: barebox

This documentation snippet was already added to the tree, but not
included anywhere.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 Documentation/user/user-manual.rst | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/user/user-manual.rst b/Documentation/user/user-manual.rst
index 0d6daee..be44f0d 100644
--- a/Documentation/user/user-manual.rst
+++ b/Documentation/user/user-manual.rst
@@ -27,6 +27,7 @@ Contents:
    usb
    ubi
    booting-linux
+   remote-control
    system-setup
    reset-reason
    system-reset
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 4/5] ratp: remove unused ratp_close command
  2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
  2016-02-09 16:01 ` [PATCH 2/5] Documentation: m25p80: include in documentation Robert Schwebel
  2016-02-09 16:01 ` [PATCH 3/5] Documentation: user manual: include documentation for remote-control Robert Schwebel
@ 2016-02-09 16:01 ` Robert Schwebel
  2016-02-09 16:01 ` [PATCH 5/5] Documentation: commands: remove autogenerated directory on mrproper Robert Schwebel
  2016-02-10  7:20 ` [PATCH 1/5] Documentation: booting linux: improve wording Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Robert Schwebel @ 2016-02-09 16:01 UTC (permalink / raw)
  To: barebox

This is a leftover from development, remove.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 common/ratp.c | 16 +---------------
 1 file changed, 1 insertion(+), 15 deletions(-)

diff --git a/common/ratp.c b/common/ratp.c
index 2fef3cc..e879e2b 100644
--- a/common/ratp.c
+++ b/common/ratp.c
@@ -398,20 +398,6 @@ out:
 	ratp_console_unregister(ctx);
 }
 
-static int do_ratp_close(int argc, char *argv[])
-{
-	if (ratp_command_ctx && ratp_command_ctx->cdev)
-		ratp_console_unregister(ratp_command_ctx);
-	else
-		printf("ratp is not active\n");
-
-	return 0;
-}
-
-BAREBOX_CMD_START(ratp_close)
-	.cmd	= do_ratp_close,
-};
-
 int barebox_ratp_fs_call(struct ratp_bb_pkt *tx, struct ratp_bb_pkt **rx)
 {
 	struct ratp_ctx *ctx = ratp_command_ctx;
@@ -508,4 +494,4 @@ static void barebox_ratp_close(void)
 	if (ratp_command_ctx && ratp_command_ctx->cdev)
 		ratp_console_unregister(ratp_command_ctx);
 }
-predevshutdown_exitcall(barebox_ratp_close);
\ No newline at end of file
+predevshutdown_exitcall(barebox_ratp_close);
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* [PATCH 5/5] Documentation: commands: remove autogenerated directory on mrproper
  2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
                   ` (2 preceding siblings ...)
  2016-02-09 16:01 ` [PATCH 4/5] ratp: remove unused ratp_close command Robert Schwebel
@ 2016-02-09 16:01 ` Robert Schwebel
  2016-02-10  7:20 ` [PATCH 1/5] Documentation: booting linux: improve wording Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Robert Schwebel @ 2016-02-09 16:01 UTC (permalink / raw)
  To: barebox

On 'make mrproper', remove the directory hierarchy autogenerated with
'make docs'.

Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
---
 Makefile | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Makefile b/Makefile
index 73fb09b..5c5b85c 100644
--- a/Makefile
+++ b/Makefile
@@ -965,7 +965,7 @@ CLEAN_FILES +=	barebox System.map include/generated/barebox_default_env.h \
 		barebox.efi barebox.canon-a1100.bin
 
 # Directories & files removed with 'make mrproper'
-MRPROPER_DIRS  += include/config usr/include include/generated
+MRPROPER_DIRS  += include/config usr/include include/generated Documentation/commands
 MRPROPER_FILES += .config .config.old .version .old_version \
                   include/config.h           \
 		  Module.symvers tags TAGS cscope*
-- 
2.7.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

* Re: [PATCH 1/5] Documentation: booting linux: improve wording
  2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
                   ` (3 preceding siblings ...)
  2016-02-09 16:01 ` [PATCH 5/5] Documentation: commands: remove autogenerated directory on mrproper Robert Schwebel
@ 2016-02-10  7:20 ` Sascha Hauer
  4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2016-02-10  7:20 UTC (permalink / raw)
  To: Robert Schwebel; +Cc: barebox

On Tue, Feb 09, 2016 at 05:01:20PM +0100, Robert Schwebel wrote:
> 'bootm' is the lowlevel boot command, in contrast to 'boot', which is
> more highlevel.
> 
> Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 6+ messages in thread

end of thread, other threads:[~2016-02-10  7:20 UTC | newest]

Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-02-09 16:01 [PATCH 1/5] Documentation: booting linux: improve wording Robert Schwebel
2016-02-09 16:01 ` [PATCH 2/5] Documentation: m25p80: include in documentation Robert Schwebel
2016-02-09 16:01 ` [PATCH 3/5] Documentation: user manual: include documentation for remote-control Robert Schwebel
2016-02-09 16:01 ` [PATCH 4/5] ratp: remove unused ratp_close command Robert Schwebel
2016-02-09 16:01 ` [PATCH 5/5] Documentation: commands: remove autogenerated directory on mrproper Robert Schwebel
2016-02-10  7:20 ` [PATCH 1/5] Documentation: booting linux: improve wording Sascha Hauer

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox