mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 09/18] fec_imx: Deallocate I/O resources if probe fails
Date: Tue, 16 Feb 2016 17:29:10 -0800	[thread overview]
Message-ID: <1455672559-25061-10-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1455672559-25061-1-git-send-email-andrew.smirnov@gmail.com>

Add a proper check for I/O memory resource allocation failure and
replace dev_request_mem_region with dev_request_mem_resource so it would
be possible to correctly deallocate device's I/O resources when probe
fails.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/net/fec_imx.c | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/drivers/net/fec_imx.c b/drivers/net/fec_imx.c
index f413acd..c059882 100644
--- a/drivers/net/fec_imx.c
+++ b/drivers/net/fec_imx.c
@@ -686,6 +686,7 @@ static int fec_probe(struct device_d *dev)
 	enum fec_type type;
 	int phy_reset;
 	u32 msec = 1;
+	struct resource *res;
 
 	ret = dev_get_drvdata(dev, (const void **)&type);
 	if (ret)
@@ -714,7 +715,12 @@ static int fec_probe(struct device_d *dev)
 	if (ret < 0)
 		goto put_clk;
 
-	fec->regs = dev_request_mem_region(dev, 0);
+	res = dev_request_mem_resource(dev, 0);
+	if (IS_ERR(res)) {
+		ret = PTR_ERR(res);
+		goto disable_clk;
+	}
+	fec->regs = IOMEM(res->start);
 
 	phy_reset = of_get_named_gpio(dev->device_node, "phy-reset-gpios", 0);
 	if (gpio_is_valid(phy_reset)) {
@@ -722,11 +728,11 @@ static int fec_probe(struct device_d *dev)
 
 		ret = gpio_request(phy_reset, "phy-reset");
 		if (ret)
-			goto disable_clk;
+			goto release_res;
 
 		ret = gpio_direction_output(phy_reset, 0);
 		if (ret)
-			goto disable_clk;
+			goto release_res;
 
 		mdelay(msec);
 		gpio_set_value(phy_reset, 1);
@@ -766,7 +772,7 @@ static int fec_probe(struct device_d *dev)
 	}
 
 	if (ret)
-		goto disable_clk;
+		goto release_res;
 
 	fec_init(edev);
 
@@ -786,6 +792,8 @@ static int fec_probe(struct device_d *dev)
 
 	return 0;
 
+release_res:
+	release_region(res);
 disable_clk:
 	clk_disable(fec->clk);
 put_clk:
-- 
2.5.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-02-17  1:30 UTC|newest]

Thread overview: 31+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-02-17  1:29 [PATCH 00/17] RFC for additional 'nvmem' plumbing Andrey Smirnov
2016-02-17  1:29 ` [PATCH 01/18] common: Add EPROBE_DEFER to strerror Andrey Smirnov
2016-02-17  1:29 ` [PATCH 02/18] base: driver.c: Coalesce error checking code Andrey Smirnov
2016-02-17  1:29 ` [PATCH 03/18] [RFC] at91: Make IS_ERR work for I/O pointers Andrey Smirnov
2016-02-17  8:34   ` Sascha Hauer
2016-02-17 20:39     ` Andrey Smirnov
2016-02-18 10:26       ` Sascha Hauer
2016-02-17  1:29 ` [PATCH 04/18] [RFC] base/driver.c: Remove dev_request_mem_region_err_null Andrey Smirnov
2016-02-17  1:29 ` [PATCH 05/18] i2c-at91: Use IS_ERR instead of checking for NULL Andrey Smirnov
2016-02-17  1:29 ` [PATCH 06/18] clk-imx6: Call clk_enable on mmdc_ch0_axi_podf Andrey Smirnov
2016-02-17  1:29 ` [PATCH 07/18] fec_imx: Deallocate clocks when probe fails Andrey Smirnov
2016-02-17  1:29 ` [PATCH 08/18] [RFC] base: Introduce dev_request_mem_resource Andrey Smirnov
2016-02-17  1:29 ` Andrey Smirnov [this message]
2016-02-17  1:29 ` [PATCH 10/18] fec_imx: Free phy_reset GPIO if when probe fails Andrey Smirnov
2016-02-17  1:29 ` [PATCH 11/18] fec_imx: Use FEC_ECNTRL_RESET instead of a magic number Andrey Smirnov
2016-02-17  1:29 ` [PATCH 12/18] fec_imx: Impelemnt reset timeout Andrey Smirnov
2016-02-17  8:43   ` Sascha Hauer
2016-02-17  1:29 ` [PATCH 13/18] fec_imx: Deallocate DMA buffers when probe fails Andrey Smirnov
2016-02-17  1:29 ` [PATCH 14/18] fec_imx: Unregister MDIO " Andrey Smirnov
2016-02-17  1:29 ` [PATCH 15/18] [RFC] net: eth: Always use DEVICE_ID_DYNAMIC Andrey Smirnov
2016-02-17  2:40   ` Trent Piepho
2016-02-17  4:16     ` Andrey Smirnov
2016-02-18 19:30       ` Trent Piepho
2016-02-19 17:17         ` Andrey Smirnov
2016-02-17  1:29 ` [PATCH 16/18] [RFC] nvmem: Add of_nvmem_cell_from_cell_np Andrey Smirnov
2016-02-17  1:29 ` [PATCH 17/18] [RFC] nvmem: Add nvmem-ro-of-blob driver Andrey Smirnov
2016-02-17  8:52   ` Sascha Hauer
2016-02-17 20:40     ` Andrey Smirnov
2016-02-17  1:29 ` [PATCH 18/18] [RFC] nvmem: Add nvmem-sg driver Andrey Smirnov
2016-02-17  3:09 ` [PATCH 00/17] RFC for additional 'nvmem' plumbing Trent Piepho
2016-02-17  4:20   ` Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1455672559-25061-10-git-send-email-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox