From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 1/7] ARM: i.MX: karo-tx6: Factor out a common tx6 dtsi file
Date: Wed, 2 Mar 2016 17:07:37 +0100 [thread overview]
Message-ID: <1456934863-30990-2-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1456934863-30990-1-git-send-email-s.hauer@pengutronix.de>
The stuff we currently have in the i.MX6q dts file can be reused for
the i.MX6dl variants, so factor out a common dtsi file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/dts/imx6dl-tx6u-801x.dts | 58 +-------------------------------------
arch/arm/dts/imx6qdl-tx6x.dtsi | 59 +++++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+), 57 deletions(-)
create mode 100644 arch/arm/dts/imx6qdl-tx6x.dtsi
diff --git a/arch/arm/dts/imx6dl-tx6u-801x.dts b/arch/arm/dts/imx6dl-tx6u-801x.dts
index a480408..b6018a6 100644
--- a/arch/arm/dts/imx6dl-tx6u-801x.dts
+++ b/arch/arm/dts/imx6dl-tx6u-801x.dts
@@ -1,65 +1,9 @@
#include <arm/imx6dl-tx6u-801x.dts>
#include "imx6qdl.dtsi"
+#include "imx6qdl-tx6x.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
-
- chosen {
- linux,stdout-path = &uart1;
-
- environment@0 {
- compatible = "barebox,environment";
- device-path = &gpmi, "partname:barebox-environment";
- };
- };
-};
-
-&gpmi {
- partition@0 {
- label = "barebox";
- reg = <0x0 0x400000>;
- };
-
- partition@1 {
- label = "barebox-environment";
- reg = <0x400000 0x100000>;
- };
};
-&iomuxc {
- imx6qdl-tx6 {
- pinctrl_hog: hoggrp {
- fsl,pins = <
- MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
- MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
- MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
- MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
- MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
- >;
- };
-
- pinctrl_enet: enetgrp {
- fsl,pins = <
- MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
- MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
- MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
- MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
- MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
- MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
- MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
- MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
- >;
- };
- };
-};
-
-&fec {
- phy-reset-duration = <22>;
-};
-
-&ocotp {
- barebox,provide-mac-address = <&fec 0x620>;
-};
diff --git a/arch/arm/dts/imx6qdl-tx6x.dtsi b/arch/arm/dts/imx6qdl-tx6x.dtsi
new file mode 100644
index 0000000..7584e43
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-tx6x.dtsi
@@ -0,0 +1,59 @@
+/ {
+ chosen {
+ linux,stdout-path = &uart1;
+
+ environment-nand {
+ compatible = "barebox,environment";
+ device-path = &gpmi, "partname:barebox-environment";
+ };
+ };
+};
+
+&fec {
+ phy-reset-duration = <22>;
+};
+
+&gpmi {
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x400000>;
+ };
+
+ partition@1 {
+ label = "barebox-environment";
+ reg = <0x400000 0x100000>;
+ };
+};
+
+&iomuxc {
+ imx6qdl-tx6 {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */
+ MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */
+ MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ >;
+ };
+ };
+};
+
+&ocotp {
+ barebox,provide-mac-address = <&fec 0x620>;
+};
--
2.7.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-03-02 16:08 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 16:07 [PATCH] i.MX6: Karo: Update TX6 support Sascha Hauer
2016-03-02 16:07 ` Sascha Hauer [this message]
2016-03-02 16:07 ` [PATCH 2/7] ARM: i.MX: karo-tx6: Support eMMC board variants Sascha Hauer
2016-03-02 16:07 ` [PATCH 3/7] ARM: i.MX: karo-tx6: Add support for the i.MX6q 1GiB variant Sascha Hauer
2016-03-02 16:07 ` [PATCH 4/7] ARM: i.MX: karo-tx6: Generalize 801x support Sascha Hauer
2016-03-02 16:07 ` [PATCH 5/7] ARM: i.MX: karo-tx6: Setup other PMICs Sascha Hauer
2016-03-04 11:48 ` Juergen Borleis
2016-03-07 8:08 ` Sascha Hauer
2016-03-02 16:07 ` [PATCH 6/7] ARM: i.MX: karo-tx6: disable power button Sascha Hauer
2016-03-02 16:07 ` [PATCH 7/7] ARM: i.MX: karo-tx6: add pr_fmt Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1456934863-30990-2-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox