From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 06/11] imx-bbu-nand-fcb: erase on demand
Date: Tue, 15 Mar 2016 12:19:09 +0100 [thread overview]
Message-ID: <1458040754-32240-7-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1458040754-32240-1-git-send-email-s.hauer@pengutronix.de>
Instead of erasing the whole partition on update entry, erase the areas
separately when we actually want to write them. This is done as a step
towards robust update.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
common/imx-bbu-nand-fcb.c | 47 ++++++++++++++---------------------------------
1 file changed, 14 insertions(+), 33 deletions(-)
diff --git a/common/imx-bbu-nand-fcb.c b/common/imx-bbu-nand-fcb.c
index 492dd92..3dc9274 100644
--- a/common/imx-bbu-nand-fcb.c
+++ b/common/imx-bbu-nand-fcb.c
@@ -272,34 +272,6 @@ static int fcb_create(struct imx_nand_fcb_bbu_handler *imx_handler,
return 0;
}
-static int imx_bbu_erase(struct mtd_info *mtd)
-{
- uint64_t offset = 0;
- struct erase_info erase;
- int ret;
-
- while (offset < mtd->size) {
- pr_debug("erasing at 0x%08llx\n", offset);
- if (mtd_block_isbad(mtd, offset)) {
- pr_debug("erase skip block @ 0x%08llx\n", offset);
- offset += mtd->erasesize;
- continue;
- }
-
- memset(&erase, 0, sizeof(erase));
- erase.addr = offset;
- erase.len = mtd->erasesize;
-
- ret = mtd_erase(mtd, &erase);
- if (ret)
- return ret;
-
- offset += mtd->erasesize;
- }
-
- return 0;
-}
-
static int mtd_peb_write_block(struct mtd_info *mtd, void *buf, int block, int len)
{
int ret;
@@ -352,13 +324,22 @@ static int imx_bbu_firmware_start_block(struct mtd_info *mtd, int num)
static int imx_bbu_write_firmware(struct mtd_info *mtd, unsigned num, void *buf,
size_t len)
{
- int ret;
+ int ret, i;
int num_blocks = imx_bbu_firmware_max_blocks(mtd);
int block = imx_bbu_firmware_start_block(mtd, num);
pr_info("writing firmware %d to block %d (ofs 0x%08x)\n",
num, block, block * mtd->erasesize);
+ for (i = 0; i < num_blocks; i++) {
+ if (mtd_peb_is_bad(mtd, block + i))
+ continue;
+
+ ret = mtd_peb_erase(mtd, block + i);
+ if (ret && ret != -EIO)
+ return ret;
+ }
+
while (len > 0) {
int now = min(len, mtd->erasesize);
@@ -470,6 +451,10 @@ again:
if (cpu_is_mx28())
imx28_dbbt_create(dbbt, *n_bad_blocksp);
+ ret = mtd_peb_erase(mtd, block);
+ if (ret)
+ return ret;
+
ret = raw_write_page(mtd, fcb_raw_page, block * mtd->erasesize);
if (ret) {
pr_err("Writing FCB on block %d failed with %s\n",
@@ -629,10 +614,6 @@ static int imx_bbu_nand_update(struct bbu_handler *handler, struct bbu_data *dat
if (ret)
goto out;
- ret = imx_bbu_erase(mtd);
- if (ret)
- goto out;
-
ret = imx_bbu_write_firmware(mtd, 0, fw, fw_size);
if (ret < 0)
goto out;
--
2.7.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2016-03-15 11:19 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-15 11:19 i.MX NAND Boot: Make update robust against power failures Sascha Hauer
2016-03-15 11:19 ` [PATCH 01/11] bbu: Allow to refresh/repair images Sascha Hauer
2016-03-15 11:19 ` [PATCH 02/11] mtd: nand: export nand_check_erased_buf Sascha Hauer
2016-03-15 11:19 ` [PATCH 03/11] imx-bbu-nand-fcb: factor out layout functions Sascha Hauer
2016-03-15 11:19 ` [PATCH 04/11] imx-bbu-nand-fcb: Use mtd-peb API to write firmware Sascha Hauer
2016-03-15 11:19 ` [PATCH 05/11] imx-bbu-nand-fcb: factor out a fcb write function Sascha Hauer
2016-03-15 11:19 ` Sascha Hauer [this message]
2016-03-15 11:19 ` [PATCH 07/11] imx-bbu-nand-fcb: Only write FCBs/DBBTs when necessary Sascha Hauer
2016-03-15 11:19 ` [PATCH 08/11] imx-bbu-nand-fcb: When writing firmware return new bad blocks Sascha Hauer
2016-03-15 11:19 ` [PATCH 09/11] imx-bbu-nand-fcb: Print error when writing blocks fails Sascha Hauer
2016-03-15 11:19 ` [PATCH 10/11] imx-bbu-nand-fcb: Make robust against power cuts Sascha Hauer
2016-03-15 11:19 ` [PATCH 11/11] imx-bbu-nand-fcb: Print error message when out of pebs Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1458040754-32240-7-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox