mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 3/4] scripts: imx-usb-loader: support set_bits/clear_bits
Date: Thu, 28 Apr 2016 16:16:28 +0200	[thread overview]
Message-ID: <1461852989-26399-3-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1461852989-26399-1-git-send-email-s.hauer@pengutronix.de>

Now that we can use set_bits/clear_bits in the DCD tables, add support
for this in the imx-usb-loader aswell.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
 scripts/imx/imx-usb-loader.c | 45 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 39 insertions(+), 6 deletions(-)

diff --git a/scripts/imx/imx-usb-loader.c b/scripts/imx/imx-usb-loader.c
index 91151b8..cf9d610 100644
--- a/scripts/imx/imx-usb-loader.c
+++ b/scripts/imx/imx-usb-loader.c
@@ -412,7 +412,7 @@ int do_status(void)
 
 #define V(a) (((a) >> 24) & 0xff), (((a) >> 16) & 0xff), (((a) >> 8) & 0xff), ((a) & 0xff)
 
-static int read_memory(unsigned addr, unsigned char *dest, unsigned cnt)
+static int read_memory(unsigned addr, void *dest, unsigned cnt)
 {
 	static unsigned char read_reg_command[] = {
 		1,
@@ -559,6 +559,31 @@ static int write_memory(unsigned addr, unsigned val, int width)
 	return err;
 }
 
+static int modify_memory(unsigned addr, unsigned val, int width, int set_bits, int clear_bits)
+{
+	int err;
+
+	if (set_bits || clear_bits) {
+		uint32_t r;
+
+		err = read_memory(addr, &r, 4);
+		if (err < 0)
+			return err;
+
+		if (verbose > 1)
+			printf("reg 0x%08x val: 0x%08x %s0x%08x\n", addr, r,
+			       set_bits ? "|= " : "&= ~", val);
+
+		if (set_bits)
+			r |= val;
+		if (clear_bits)
+			r &= ~val;
+		val = r;
+	}
+
+	return write_memory(addr, val, 4);
+}
+
 static int load_file(void *buf, unsigned len, unsigned dladdr, unsigned char type)
 {
 	static unsigned char dl_command[] = {
@@ -685,15 +710,24 @@ static int write_dcd_table_ivt(struct imx_flash_header_v2 *hdr, unsigned char *f
 	while (dcd < dcd_end) {
 		unsigned s_length = (dcd[1] << 8) + dcd[2];
 		unsigned char *s_end = dcd + s_length;
+		int set_bits = 0, clear_bits = 0;
 
 		printf("command: 0x%02x sub dcd length: 0x%04x, flags: 0x%02x\n", dcd[0], s_length, dcd[3]);
 
-		if ((dcd[0] != 0xcc) || (dcd[3] != 0x04)) {
+		if ((dcd[0] != 0xcc)) {
 			printf("Skipping unknown sub tag 0x%02x with len %04x\n", dcd[0], s_length);
 			usleep(50000);
 			dcd += s_length;
 			continue;
 		}
+
+		if (dcd[3] & PARAMETER_FLAG_MASK) {
+			if (dcd[3] & PARAMETER_FLAG_SET)
+				set_bits = 1;
+			else
+				clear_bits = 1;
+		}
+
 		dcd += 4;
 
 		if (s_end > dcd_end) {
@@ -706,9 +740,8 @@ static int write_dcd_table_ivt(struct imx_flash_header_v2 *hdr, unsigned char *f
 			unsigned val = (dcd[4] << 24) | (dcd[5] << 16) | (dcd[6] << 8) | dcd[7];
 
 			dcd += 8;
-			err = write_memory(addr, val, 4);
-			if (err < 0)
-				return err;
+
+			modify_memory(addr, val, 4, set_bits, clear_bits);
 		}
 	}
 	return err;
@@ -1209,7 +1242,7 @@ cleanup:
 static int write_mem(struct config_data *data, uint32_t addr, uint32_t val, int width,
 		     int set_bits, int clear_bits)
 {
-	return write_memory(addr, val, width);
+	return modify_memory(addr, val, width, set_bits, clear_bits);
 }
 
 static int parse_initfile(const char *filename)
-- 
2.8.0.rc3


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-04-28 14:16 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-04-28 14:16 [PATCH 1/4] scripts: imx: " Sascha Hauer
2016-04-28 14:16 ` [PATCH 2/4] scripts: imx-usb-loader: make debug output more useful Sascha Hauer
2016-04-28 14:16 ` Sascha Hauer [this message]
2016-04-28 14:16 ` [PATCH 4/4] ARM: i.MX: karo-tx6: Add support for the 2GiB i.MX6q+ board variant Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1461852989-26399-3-git-send-email-s.hauer@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox