From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-wm0-x242.google.com ([2a00:1450:400c:c09::242]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1b7OQa-0005Z8-3e for barebox@lists.infradead.org; Mon, 30 May 2016 14:44:26 +0000 Received: by mail-wm0-x242.google.com with SMTP id e3so23315211wme.2 for ; Mon, 30 May 2016 07:44:03 -0700 (PDT) From: yegorslists@googlemail.com Date: Mon, 30 May 2016 16:43:50 +0200 Message-Id: <1464619430-23873-1-git-send-email-yegorslists@googlemail.com> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2] Add support for Baltos systems To: barebox@lists.infradead.org From: Yegor Yefremov OnRISC Baltos devices are based on a am335x SoC and can be booted either from MMC or NAND. Signed-off-by: Yegor Yefremov --- Changes: v2: - remove typedef - rework invalid EEPROM content handling - add mmc0 as boot device for MMC boot source arch/arm/boards/Makefile | 1 + arch/arm/boards/vscom-baltos/Makefile | 2 + arch/arm/boards/vscom-baltos/board.c | 148 +++++++++++ arch/arm/boards/vscom-baltos/lowlevel.c | 116 +++++++++ arch/arm/dts/Makefile | 1 + arch/arm/dts/am335x-baltos-minimal.dts | 439 ++++++++++++++++++++++++++++++++ arch/arm/mach-omap/Kconfig | 7 + images/Makefile.am33xx | 8 + 8 files changed, 722 insertions(+) create mode 100644 arch/arm/boards/vscom-baltos/Makefile create mode 100644 arch/arm/boards/vscom-baltos/board.c create mode 100644 arch/arm/boards/vscom-baltos/lowlevel.c create mode 100644 arch/arm/dts/am335x-baltos-minimal.dts diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile index 9241b66..9bf3154 100644 --- a/arch/arm/boards/Makefile +++ b/arch/arm/boards/Makefile @@ -135,3 +135,4 @@ obj-$(CONFIG_MACH_VIRT2REAL) += virt2real/ obj-$(CONFIG_MACH_ZEDBOARD) += avnet-zedboard/ obj-$(CONFIG_MACH_ZYLONITE) += zylonite/ obj-$(CONFIG_MACH_VARISCITE_MX6) += variscite-mx6/ +obj-$(CONFIG_MACH_VSCOM_BALTOS) += vscom-baltos/ diff --git a/arch/arm/boards/vscom-baltos/Makefile b/arch/arm/boards/vscom-baltos/Makefile new file mode 100644 index 0000000..092c31d --- /dev/null +++ b/arch/arm/boards/vscom-baltos/Makefile @@ -0,0 +1,2 @@ +lwl-y += lowlevel.o +obj-y += board.o diff --git a/arch/arm/boards/vscom-baltos/board.c b/arch/arm/boards/vscom-baltos/board.c new file mode 100644 index 0000000..1b7022e --- /dev/null +++ b/arch/arm/boards/vscom-baltos/board.c @@ -0,0 +1,148 @@ +/* + * (C) Copyright 2008 + * Texas Instruments, + * Raghavendra KH + * + * Copyright (C) 2012 Jan Luebbe + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/** + * @file + * @brief OnRISC Baltos Specific Board Initialization routines + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static struct omap_barebox_part baltos_barebox_part = { + .nand_offset = SZ_512K, + .nand_size = 0x1e0000, +}; + +struct bsp_vs_hwparam { + uint32_t Magic; + uint32_t HwRev; + uint32_t SerialNumber; + char PrdDate[11]; + uint16_t SystemId; + uint8_t MAC1[6]; + uint8_t MAC2[6]; + uint8_t MAC3[6]; +} __attribute__ ((packed)); + +struct bsp_vs_hwparam hw_param; + +static int baltos_read_eeprom(void) +{ + size_t size; + char *buf, var_buf[32]; + int rc; + unsigned char mac_addr[6]; + + rc = read_file_2("/dev/eeprom0", + &size, + (void *)&buf, + sizeof(hw_param)); + if (rc && rc != -EFBIG) + return rc; + + memcpy(&hw_param, buf, sizeof(hw_param)); + + free(buf); + + if (hw_param.Magic == 0xDEADBEEF) { + /* setup MAC1 */ + mac_addr[0] = hw_param.MAC1[0]; + mac_addr[1] = hw_param.MAC1[1]; + mac_addr[2] = hw_param.MAC1[2]; + mac_addr[3] = hw_param.MAC1[3]; + mac_addr[4] = hw_param.MAC1[4]; + mac_addr[5] = hw_param.MAC1[5]; + + eth_register_ethaddr(0, mac_addr); + + /* setup MAC2 */ + mac_addr[0] = hw_param.MAC2[0]; + mac_addr[1] = hw_param.MAC2[1]; + mac_addr[2] = hw_param.MAC2[2]; + mac_addr[3] = hw_param.MAC2[3]; + mac_addr[4] = hw_param.MAC2[4]; + mac_addr[5] = hw_param.MAC2[5]; + + eth_register_ethaddr(1, mac_addr); + } else { + printf("Baltos: incorrect magic number (0x%x) " + "in EEPROM\n", + hw_param.Magic); + + hw_param.SystemId = 0; + } + + sprintf(var_buf, "%d", hw_param.SystemId); + globalvar_add_simple("board.id", var_buf); + + return 0; +} +environment_initcall(baltos_read_eeprom); + +static int baltos_mem_init(void) +{ + uint32_t sdram_size; + + if (!of_machine_is_compatible("vscom,onrisc")) + return 0; + + sdram_size = SZ_256M; + + arm_add_mem_device("ram0", 0x80000000, sdram_size); + + return 0; +} +mem_initcall(baltos_mem_init); + +static int baltos_devices_init(void) +{ + if (!of_machine_is_compatible("vscom,onrisc")) + return 0; + + globalvar_add_simple("board.variant", "baltos"); + + if (bootsource_get() == BOOTSOURCE_MMC) + omap_set_bootmmc_devname("mmc0"); + + omap_set_barebox_part(&baltos_barebox_part); + + if (IS_ENABLED(CONFIG_SHELL_NONE)) + return am33xx_of_register_bootdevice(); + + return 0; +} +coredevice_initcall(baltos_devices_init); diff --git a/arch/arm/boards/vscom-baltos/lowlevel.c b/arch/arm/boards/vscom-baltos/lowlevel.c new file mode 100644 index 0000000..0b5231e --- /dev/null +++ b/arch/arm/boards/vscom-baltos/lowlevel.c @@ -0,0 +1,116 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static const struct am33xx_ddr_data ddr3_data = { + .rd_slave_ratio0 = 0x38, + .wr_dqs_slave_ratio0 = 0x44, + .fifo_we_slave_ratio0 = 0x94, + .wr_slave_ratio0 = 0x7D, + .use_rank0_delay = 0x01, + .dll_lock_diff0 = 0x0, +}; + +static const struct am33xx_cmd_control ddr3_cmd_ctrl = { + .slave_ratio0 = 0x80, + .dll_lock_diff0 = 0x1, + .invert_clkout0 = 0x0, + .slave_ratio1 = 0x80, + .dll_lock_diff1 = 0x1, + .invert_clkout1 = 0x0, + .slave_ratio2 = 0x80, + .dll_lock_diff2 = 0x1, + .invert_clkout2 = 0x0, +}; + +static const struct am33xx_emif_regs ddr3_regs = { + .emif_read_latency = 0x100007, + .emif_tim1 = 0x0AAAD4DB, + .emif_tim2 = 0x266B7FDA, + .emif_tim3 = 0x501F867F, + .zq_config = 0x50074BE4, + .sdram_config = 0x61C05332, + .sdram_config2 = 0x0, + .sdram_ref_ctrl = 0xC30, +}; + +extern char __dtb_am335x_baltos_minimal_start[]; + +/** + * @brief The basic entry point for board initialization. + * + * This is called as part of machine init (after arch init). + * This is again called with stack in SRAM, so not too many + * constructs possible here. + * + * @return void + */ +static noinline int baltos_sram_init(void) +{ + uint32_t sdram_size; + void *fdt; + + fdt = __dtb_am335x_baltos_minimal_start; + + sdram_size = SZ_256M; + + /* WDT1 is already running when the bootloader gets control + * Disable it to avoid "random" resets + */ + __raw_writel(WDT_DISABLE_CODE1, AM33XX_WDT_REG(WSPR)); + while (__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0); + __raw_writel(WDT_DISABLE_CODE2, AM33XX_WDT_REG(WSPR)); + while (__raw_readl(AM33XX_WDT_REG(WWPS)) != 0x0); + + /* Setup the PLLs and the clocks for the peripherals */ + am33xx_pll_init(MPUPLL_M_500, DDRPLL_M_400); + am335x_sdram_init(0x18B, &ddr3_cmd_ctrl, &ddr3_regs, + &ddr3_data); + + am33xx_uart_soft_reset((void *)AM33XX_UART0_BASE); + am33xx_enable_uart0_pin_mux(); + omap_uart_lowlevel_init((void *)AM33XX_UART0_BASE); + putc_ll('>'); + + barebox_arm_entry(0x80000000, sdram_size, fdt); +} + +ENTRY_FUNCTION(start_am33xx_baltos_sram, bootinfo, r1, r2) +{ + am33xx_save_bootinfo((void *)bootinfo); + + /* + * Setup C environment, the board init code uses global variables. + * Stackpointer has already been initialized by the ROM code. + */ + relocate_to_current_adr(); + setup_c(); + + baltos_sram_init(); +} + +ENTRY_FUNCTION(start_am33xx_baltos_sdram, r0, r1, r2) +{ + uint32_t sdram_size; + void *fdt; + + sdram_size = SZ_256M; + fdt = __dtb_am335x_baltos_minimal_start; + + fdt -= get_runtime_offset(); + + barebox_arm_entry(0x80000000, sdram_size, fdt); +} diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 813e098..0bfd17d 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -75,5 +75,6 @@ pbl-dtb-$(CONFIG_MACH_TX6X) += imx6q-tx6q.dtb.o pbl-dtb-$(CONFIG_MACH_UDOO) += imx6q-udoo.dtb.o pbl-dtb-$(CONFIG_MACH_USI_TOPKICK) += kirkwood-topkick-bb.dtb.o pbl-dtb-$(CONFIG_MACH_VARISCITE_MX6) += imx6q-var-custom.dtb.o +pbl-dtb-$(CONFIG_MACH_VSCOM_BALTOS) += am335x-baltos-minimal.dtb.o clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.lzo diff --git a/arch/arm/dts/am335x-baltos-minimal.dts b/arch/arm/dts/am335x-baltos-minimal.dts new file mode 100644 index 0000000..13eb91c --- /dev/null +++ b/arch/arm/dts/am335x-baltos-minimal.dts @@ -0,0 +1,439 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * VScom OnRISC + * http://www.vscom.de + */ + +/dts-v1/; + +#include "am33xx.dtsi" +#include + +/ { + model = "OnRISC Baltos"; + compatible = "vscom,onrisc", "ti,am33xx"; + + chosen { + linux,stdout-path = &uart0; + }; + + cpus { + cpu@0 { + cpu0-supply = <&vdd1_reg>; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +&am33xx_pinmux { + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0xf0 (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_dat3.mmc0_dat3 */ + 0xf4 (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_dat2.mmc0_dat2 */ + 0xf8 (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_dat1.mmc0_dat1 */ + 0xfc (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_dat0.mmc0_dat0 */ + 0x100 (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_clk.mmc0_clk */ + 0x104 (MUX_MODE0 | INPUT_EN | PULL_UP) /* mmc0_cmd.mmc0_cmd */ + >; + }; + + i2c1_pins: pinmux_i2c1_pins { + pinctrl-single,pins = < + 0x158 0x2a /* spi0_d1.i2c1_sda_mux3, INPUT | MODE2 */ + 0x15c 0x2a /* spi0_cs0.i2c1_scl_mux3, INPUT | MODE2 */ + >; + }; + + tps65910_pins: pinmux_tps65910_pins { + pinctrl-single,pins = < + 0x078 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ben1.gpio1[28] */ + >; + + }; + tca6416_pins: pinmux_tca6416_pins { + pinctrl-single,pins = < + AM33XX_IOPAD(0x9b4, PIN_INPUT_PULLUP | MUX_MODE7) /* xdma_event_intr1.gpio0[20] tca6416 stuff */ + >; + }; + + uart0_pins: pinmux_uart0_pins { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_crs.rmii1_crs_dv */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_tx_en.rmii1_txen */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd1.rmii1_txd1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* mii1_txd0.rmii1_txd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd1.rmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* mii1_rxd0.rmii1_rxd0 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_ref_clk.rmii1_refclk */ + + + /* Slave 2 */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rctl */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value*/ + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + nandflash_pins_s0: nandflash_pins_s0 { + pinctrl-single,pins = < + 0x0 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad0.gpmc_ad0 */ + 0x4 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad1.gpmc_ad1 */ + 0x8 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad2.gpmc_ad2 */ + 0xc (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad3.gpmc_ad3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad4.gpmc_ad4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad5.gpmc_ad5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad6.gpmc_ad6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_ad7.gpmc_ad7 */ + 0x70 (PIN_INPUT_PULLUP | MUX_MODE0) /* gpmc_wait0.gpmc_wait0 */ + 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_30 */ + 0x7c (PIN_OUTPUT | MUX_MODE0) /* gpmc_csn0.gpmc_csn0 */ + 0x90 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale.gpmc_advn_ale */ + 0x94 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren.gpmc_oen_ren */ + 0x98 (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen.gpmc_wen */ + 0x9c (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle.gpmc_be0n_cle */ + >; + }; +}; + +&elm { + status = "okay"; +}; + +&gpmc { + pinctrl-names = "default"; + pinctrl-0 = <&nandflash_pins_s0>; + ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */ + status = "okay"; + + nand@0,0 { + reg = <0 0 0>; /* CS0, offset 0 */ + nand-bus-width = <8>; + ti,nand-ecc-opt = "bch8"; + ti,nand-xfer-type = "polled"; + + gpmc,device-nand = "true"; + gpmc,device-width = <1>; + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <40>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wait-on-read = "true"; + gpmc,wait-on-write = "true"; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,clk-activation-ns = <0>; + gpmc,wait-monitoring-ns = <0>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + elm_id = <&elm>; + + boot@0 { + label = "SPL"; + reg = <0x0 0x20000>; + }; + boot@20000{ + label = "SPL.backup1"; + reg = <0x20000 0x20000>; + }; + boot@40000 { + label = "SPL.backup2"; + reg = <0x40000 0x20000>; + }; + boot@60000 { + label = "SPL.backup3"; + reg = <0x60000 0x20000>; + }; + boot@80000 { + label = "u-boot"; + reg = <0x80000 0x1e0000>; + }; + boot@260000 { + label = "UBI"; + reg = <0x260000 0xfda0000>; + }; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + + status = "okay"; + clock-frequency = <1000>; + + tps: tps@2d { + reg = <0x2d>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio1>; + interrupts = <28 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tps65910_pins>; + }; + + at24@50 { + compatible = "at24,24c02"; + pagesize = <8>; + reg = <0x50>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + interrupt-parent = <&gpio0>; + interrupts = <20 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&tca6416_pins>; + }; +}; + +&usb { + status = "okay"; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + ti,en-ck32k-xtal = <1>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <7>; + phy-mode = "rgmii-txid"; + dual_emac_res_vlan = <2>; +}; + +&phy_sel { + rmii-clock-ext = <1>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <&vmmc_reg>; + status = "okay"; +}; + +&gpio0 { + ti,no-reset-on-init; +}; diff --git a/arch/arm/mach-omap/Kconfig b/arch/arm/mach-omap/Kconfig index d7c863c..a1bb8f0 100644 --- a/arch/arm/mach-omap/Kconfig +++ b/arch/arm/mach-omap/Kconfig @@ -184,6 +184,13 @@ config MACH_PHYTEC_SOM_AM335X select ARCH_AM33XX help Say Y here if you are using a am335x based Phytecs SOM + +config MACH_VSCOM_BALTOS + bool "VScom Baltos Devices" + select ARCH_AM33XX + help + Say Y here if you are using a am335x based VScom Baltos devices + endif choice diff --git a/images/Makefile.am33xx b/images/Makefile.am33xx index 8be78ef..8168fe4 100644 --- a/images/Makefile.am33xx +++ b/images/Makefile.am33xx @@ -135,6 +135,14 @@ pblx-$(CONFIG_MACH_BEAGLEBONE) += start_am33xx_beaglebone_sram FILE_barebox-am33xx-beaglebone-mlo.img = start_am33xx_beaglebone_sram.pblx.mlo am33xx-mlo-$(CONFIG_MACH_BEAGLEBONE) += barebox-am33xx-beaglebone-mlo.img +pblx-$(CONFIG_MACH_VSCOM_BALTOS) += start_am33xx_baltos_sdram +FILE_barebox-am33xx-baltos.img = start_am33xx_baltos_sdram.pblx +am33xx-barebox-$(CONFIG_MACH_VSCOM_BALTOS) += barebox-am33xx-baltos.img + +pblx-$(CONFIG_MACH_VSCOM_BALTOS) += start_am33xx_baltos_sram +FILE_barebox-am33xx-baltos-mlo.img = start_am33xx_baltos_sram.pblx.mlo +am33xx-mlo-$(CONFIG_MACH_VSCOM_BALTOS) += barebox-am33xx-baltos-mlo.img + ifdef CONFIG_OMAP_BUILD_IFT image-y += $(am33xx-mlo-y) else -- 2.1.4 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox