mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Andrey Smirnov <andrew.smirnov@gmail.com>
To: barebox@lists.infradead.org
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Subject: [PATCH 18/21] e1000: Properly release SW_FW_SYNC semaphore bits
Date: Tue, 31 May 2016 10:09:37 -0700	[thread overview]
Message-ID: <1464714580-31488-19-git-send-email-andrew.smirnov@gmail.com> (raw)
In-Reply-To: <1464714580-31488-1-git-send-email-andrew.smirnov@gmail.com>

As described in the datasheet Software/Firmware synchronisation bits
are expected to be released by the software after it is done using
it. Add a porper subroutine to do that instead of relying on the
Firmware clearing those bits due to timeout.

Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
---
 drivers/net/e1000/e1000.h |  1 +
 drivers/net/e1000/main.c  | 30 ++++++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h
index 6b7cf82..b47d538 100644
--- a/drivers/net/e1000/e1000.h
+++ b/drivers/net/e1000/e1000.h
@@ -2137,6 +2137,7 @@ int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t offset,
 		uint16_t *data);
 
 int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask);
+int32_t e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask);
 
 
 #endif	/* _E1000_HW_H_ */
diff --git a/drivers/net/e1000/main.c b/drivers/net/e1000/main.c
index 7ee78c3..df9ae73 100644
--- a/drivers/net/e1000/main.c
+++ b/drivers/net/e1000/main.c
@@ -273,6 +273,21 @@ int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask)
 	return E1000_SUCCESS;
 }
 
+int32_t e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask)
+{
+	uint32_t swfw_sync;
+
+	if (e1000_get_hw_eeprom_semaphore(hw))
+		return -E1000_ERR_SWFW_SYNC;
+
+	swfw_sync = e1000_read_reg(hw, E1000_SW_FW_SYNC);
+	swfw_sync &= ~mask;
+	e1000_write_reg(hw, E1000_SW_FW_SYNC, swfw_sync);
+
+	e1000_put_hw_eeprom_semaphore(hw);
+	return E1000_SUCCESS;
+}
+
 static bool e1000_is_second_port(struct e1000_hw *hw)
 {
 	switch (hw->mac_type) {
@@ -1347,6 +1362,11 @@ static int32_t e1000_write_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint
 	e1000_write_reg(hw, E1000_KUMCTRLSTA, reg_val);
 	udelay(2);
 
+	if (e1000_swfw_sync_release(hw, swfw) < 0)
+		dev_warn(hw->dev,
+			 "Timeout while releasing SWFW_SYNC bits (0x%08x)\n",
+			 swfw);
+
 	return E1000_SUCCESS;
 }
 
@@ -1374,6 +1394,11 @@ static int32_t e1000_read_kmrn_reg(struct e1000_hw *hw, uint32_t reg_addr, uint1
 	reg_val = e1000_read_reg(hw, E1000_KUMCTRLSTA);
 	*data = (uint16_t)reg_val;
 
+	if (e1000_swfw_sync_release(hw, swfw) < 0)
+		dev_warn(hw->dev,
+			 "Timeout while releasing SWFW_SYNC bits (0x%08x)\n",
+			 swfw);
+
 	return E1000_SUCCESS;
 }
 
@@ -2803,6 +2828,11 @@ static int32_t e1000_phy_hw_reset(struct e1000_hw *hw)
 
 		if (hw->mac_type >= e1000_82571)
 			mdelay(10);
+
+		if (e1000_swfw_sync_release(hw, swfw) < 0)
+			dev_warn(hw->dev,
+				 "Timeout while releasing SWFW_SYNC bits (0x%08x)\n",
+				 swfw);
 	} else {
 		/* Read the Extended Device Control Register, assert the PHY_RESET_DIR
 		 * bit to put the PHY into reset. Then, take it out of reset.
-- 
2.5.5


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2016-05-31 17:10 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-31 17:09 [PATCH 00/21] e1000 code cleanup and iNVM support Andrey Smirnov
2016-05-31 17:09 ` [PATCH 01/21] e1000: Split driver into multiple files Andrey Smirnov
2016-05-31 17:09 ` [PATCH 02/21] e1000: Include <net.h> in e1000.h Andrey Smirnov
2016-05-31 17:09 ` [PATCH 03/21] e1000: Convert E1000_*_REG macros to functions Andrey Smirnov
2016-05-31 17:09 ` [PATCH 04/21] e1000: Fix a bug in e1000_detect_gig_phy Andrey Smirnov
2016-05-31 17:09 ` [PATCH 05/21] e1000: Remove unnecessary variable Andrey Smirnov
2016-05-31 17:09 ` [PATCH 06/21] e1000: Do not read same register twice Andrey Smirnov
2016-05-31 17:09 ` [PATCH 07/21] e1000: Remove unneeded i210 specific register code Andrey Smirnov
2016-05-31 17:09 ` [PATCH 08/21] e1000: Consolidate register offset fixups Andrey Smirnov
2016-05-31 20:42   ` Trent Piepho
2016-06-01 21:35     ` Andrey Smirnov
2016-05-31 17:09 ` [PATCH 09/21] e1000: Remove 'use_eewr' parameter Andrey Smirnov
2016-05-31 17:09 ` [PATCH 10/21] e1000: Remove 'page_size' Andrey Smirnov
2016-05-31 17:09 ` [PATCH 11/21] e1000: Simplify EEPROM init for e1000_80003es2lan Andrey Smirnov
2016-05-31 17:09 ` [PATCH 12/21] e1000: Simplify EEPROM init for e1000_igb Andrey Smirnov
2016-05-31 17:09 ` [PATCH 13/21] e1000: Consolidate SPI EEPROM init code Andrey Smirnov
2016-05-31 17:09 ` [PATCH 14/21] e1000: Consolidate Microwire " Andrey Smirnov
2016-05-31 17:09 ` [PATCH 15/21] e1000: Fix a bug in e1000_probe() Andrey Smirnov
2016-05-31 17:09 ` [PATCH 16/21] e1000: Remove unnecessary intialization Andrey Smirnov
2016-05-31 17:09 ` [PATCH 17/21] e1000: Refactor Flash/EEPROM reading code Andrey Smirnov
2016-05-31 17:09 ` Andrey Smirnov [this message]
2016-05-31 17:09 ` [PATCH 19/21] e1000: Add EEPROM access locking for i210 Andrey Smirnov
2016-05-31 17:09 ` [PATCH 20/21] e1000: Add a "poll register" function Andrey Smirnov
2016-05-31 17:09 ` [PATCH 21/21] e1000: Expose i210's iNVM as a cdev Andrey Smirnov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1464714580-31488-19-git-send-email-andrew.smirnov@gmail.com \
    --to=andrew.smirnov@gmail.com \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox