mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: yegorslists@googlemail.com
To: barebox@lists.infradead.org
Cc: linux@rempel-privat.de
Subject: [PATCH 1/3] MIPS: ath79: pbl: add pbl_ar9331_wmac_enable macro
Date: Mon, 27 Jun 2016 12:34:43 +0200	[thread overview]
Message-ID: <1467023685-4820-1-git-send-email-yegorslists@googlemail.com> (raw)

From: Yegor Yefremov <yegorslists@googlemail.com>

AR9331's WMAC module requires triple WMAC reset as also working RTC
subsystem.

The code is taken as is from upstream U-Boot repository.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
---
 arch/mips/mach-ath79/include/mach/ar71xx_regs.h | 14 ++++++
 arch/mips/mach-ath79/include/mach/pbl_macros.h  | 63 +++++++++++++++++++++++++
 2 files changed, 77 insertions(+)

diff --git a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
index 4cbe94a..de96c56 100644
--- a/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
+++ b/arch/mips/mach-ath79/include/mach/ar71xx_regs.h
@@ -31,11 +31,25 @@
 #define AR71XX_PLL_SIZE		0x100
 #define AR71XX_RESET_BASE	(AR71XX_APB_BASE + 0x00060000)
 #define AR71XX_RESET_SIZE	0x100
+#define AR71XX_RTC_BASE		(AR71XX_APB_BASE + 0x00107000)
+#define AR71XX_RTC_SIZE		0x100
 
 #define AR933X_UART_BASE	(AR71XX_APB_BASE + 0x00020000)
 #define AR933X_UART_SIZE	0x14
 
 /*
+ * RTC block
+ */
+#define AR933X_RTC_REG_RESET		0x40
+#define AR933X_RTC_REG_STATUS		0x44
+#define AR933X_RTC_REG_DERIVED		0x48
+#define AR933X_RTC_REG_FORCE_WAKE	0x4c
+#define AR933X_RTC_REG_INT_CAUSE	0x50
+#define AR933X_RTC_REG_CAUSE_CLR	0x50
+#define AR933X_RTC_REG_INT_ENABLE	0x54
+#define AR933X_RTC_REG_INT_MASKE	0x58
+
+/*
  * DDR_CTRL block
  */
 #define AR933X_DDR_CONFIG		0x00
diff --git a/arch/mips/mach-ath79/include/mach/pbl_macros.h b/arch/mips/mach-ath79/include/mach/pbl_macros.h
index 8f4d09a..680fcbb 100644
--- a/arch/mips/mach-ath79/include/mach/pbl_macros.h
+++ b/arch/mips/mach-ath79/include/mach/pbl_macros.h
@@ -274,4 +274,67 @@ normal_path:
 	.set	pop
 .endm
 
+.macro	pbl_ar9331_wmac_enable
+	.set push
+	.set noreorder
+
+	/* These three WLAN_RESET will avoid original issue */
+	li      t3, 0x03
+1:
+	li      t0, CKSEG1ADDR(AR71XX_RESET_BASE)
+	lw      t1, AR933X_RESET_REG_RESET_MODULE(t0)
+	ori     t1, t1, 0x0800
+	sw      t1, AR933X_RESET_REG_RESET_MODULE(t0)
+	nop
+	lw      t1, AR933X_RESET_REG_RESET_MODULE(t0)
+	li      t2, 0xfffff7ff
+	and     t1, t1, t2
+	sw      t1, AR933X_RESET_REG_RESET_MODULE(t0)
+	nop
+	addi    t3, t3, -1
+	bnez    t3, 1b
+	nop
+
+	li      t2, 0x20
+2:
+	beqz    t2, 1b
+	nop
+	addi    t2, t2, -1
+	lw      t5, AR933X_RESET_REG_BOOTSTRAP(t0)
+	andi    t1, t5, 0x10
+	bnez    t1, 2b
+	nop
+
+	li      t1, 0x02110E
+	sw      t1, AR933X_RESET_REG_BOOTSTRAP(t0)
+	nop
+
+	/* RTC Force Wake */
+	li      t0, CKSEG1ADDR(AR71XX_RTC_BASE)
+	li      t1, 0x03
+	sw      t1, AR933X_RTC_REG_FORCE_WAKE(t0)
+	nop
+	nop
+
+	/* RTC Reset */
+	li      t1, 0x00
+	sw      t1, AR933X_RTC_REG_RESET(t0)
+	nop
+	nop
+
+	li      t1, 0x01
+	sw      t1, AR933X_RTC_REG_RESET(t0)
+	nop
+	nop
+
+	/* Wait for RTC in on state */
+1:
+	lw      t1, AR933X_RTC_REG_STATUS(t0)
+	andi    t1, t1, 0x02
+	beqz    t1, 1b
+	nop
+
+	.set	pop
+.endm
+
 #endif /* __ASM_MACH_ATH79_PBL_MACROS_H */
-- 
2.1.4


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2016-06-27 10:35 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-27 10:34 yegorslists [this message]
2016-06-27 10:34 ` [PATCH 2/3] MIPS: black-swift: pbl: init WMAC yegorslists
2016-06-27 10:34 ` [PATCH 3/3] MIPS: tplink-mr3020: " yegorslists
2016-06-28  6:35 ` [PATCH 1/3] MIPS: ath79: pbl: add pbl_ar9331_wmac_enable macro Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467023685-4820-1-git-send-email-yegorslists@googlemail.com \
    --to=yegorslists@googlemail.com \
    --cc=barebox@lists.infradead.org \
    --cc=linux@rempel-privat.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox