mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: "Stefan Müller-Klieser" <s.mueller-klieser@phytec.de>
To: barebox@lists.infradead.org
Subject: [PATCH] ARM: bootm: recalculate decompression space
Date: Fri, 1 Jul 2016 16:48:39 +0200	[thread overview]
Message-ID: <1467384519-23059-1-git-send-email-s.mueller-klieser@phytec.de> (raw)

According to the kernel documentation it is recommended to place the
compressed image between 32 MiB and 128 MiB. The DTB and initrd should
be placed above 128 MiB. We will follow the recommendation as long as we
have enough RAM. If this is not the case, we fall back to the scheme.
This change is required because of the ARM default kernel config changes
regarding RODATA layout, which lead to an increased compression factor
of the kernel image.
This should be regarded as an intermediate solution until there is a
mechanism for the kernel image to report the decompressed layout
requirements to the bootloader.

Signed-off-by: Stefan Müller-Klieser <s.mueller-klieser@phytec.de>
---
 arch/arm/lib/bootm.c | 18 +++++++++++++++---
 1 file changed, 15 insertions(+), 3 deletions(-)

diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 803aa94..be1259b 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -81,10 +81,15 @@ static int get_kernel_addresses(size_t image_size,
 		return ret;
 
 	/*
-	 * We don't know the exact decompressed size so just use a conservative
-	 * default of 4 times the size of the compressed image.
+	 * The kernel documentation "Documentation/arm/Booting" advises
+	 * to place the compressed image outside of the lowest 32 MiB to
+	 * avoid relocation. We should do this if we have at least 64 MiB
+	 * of ram. If we have less space, we assume a maximum
+	 * compression factor of 5.
 	 */
-	image_decomp_size = PAGE_ALIGN(image_size * 4);
+	image_decomp_size = PAGE_ALIGN(image_size * 5);
+	if (mem_size >= SZ_64M)
+		image_decomp_size = max(image_decomp_size, SZ_32M);
 
 	/*
 	 * By default put oftree/initrd close behind compressed kernel image to
@@ -113,6 +118,13 @@ static int get_kernel_addresses(size_t image_size,
 
 	*mem_free = PAGE_ALIGN(*load_address + image_size + spacing);
 
+	/*
+	 * Place oftree/initrd outside of the first 128 MiB, if we have space
+	 * for it. This avoids potential conflicts with the kernel decompressor.
+	 */
+	if (mem_size > SZ_256M)
+		*mem_free = max(*mem_free, mem_start + SZ_128M);
+
 	return 0;
 }
 
-- 
1.9.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2016-07-01 14:49 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-01 14:48 Stefan Müller-Klieser [this message]
2016-07-04  9:32 ` Sascha Hauer
     [not found] <alpine.DEB.2.00.1607051136430.23712@blala.de>
2016-07-05  9:47 ` Alexander Kurz
2016-07-05  9:58   ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1467384519-23059-1-git-send-email-s.mueller-klieser@phytec.de \
    --to=s.mueller-klieser@phytec.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox