From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.85_2 #1 (Red Hat Linux)) id 1bK0Ac-000619-FT for barebox@lists.infradead.org; Mon, 04 Jul 2016 09:28:04 +0000 From: Sascha Hauer Date: Mon, 4 Jul 2016 11:27:37 +0200 Message-Id: <1467624459-16448-11-git-send-email-s.hauer@pengutronix.de> In-Reply-To: <1467624459-16448-1-git-send-email-s.hauer@pengutronix.de> References: <1467624459-16448-1-git-send-email-s.hauer@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 10/12] ARM: i.MX53 Vincell: Add NAND xload support To: Barebox List The Vincell boards do the SDRAM setup from board init code, so the image size is limited to the internal SRAM size. To overcome this limitation use the NAND xload support. Signed-off-by: Sascha Hauer --- arch/arm/boards/guf-vincell/lowlevel.c | 25 ++++++++++++++++++++++--- arch/arm/mach-imx/Kconfig | 9 +++++++++ images/Makefile.imx | 14 ++++++++++---- 3 files changed, 41 insertions(+), 7 deletions(-) diff --git a/arch/arm/boards/guf-vincell/lowlevel.c b/arch/arm/boards/guf-vincell/lowlevel.c index f4bd44e..34c28f7 100644 --- a/arch/arm/boards/guf-vincell/lowlevel.c +++ b/arch/arm/boards/guf-vincell/lowlevel.c @@ -11,6 +11,7 @@ #include #include #include +#include #define IOMUX_PADCTL_DDRI_DDR (1 << 9) @@ -127,8 +128,9 @@ static noinline void imx53_guf_vincell_init(void *fdt) { void __iomem *ccm = (void *)MX53_CCM_BASE_ADDR; u32 r; + enum bootsource src; + int instance; - imx5_cpu_lowlevel_init(); arm_setup_stack(0xf8020000 - 8); writel(0x0088494c, ccm + MX5_CCM_CBCDR); @@ -149,11 +151,28 @@ static noinline void imx53_guf_vincell_init(void *fdt) disable_watchdog(); configure_dram_iomux(); imx_esdctlv4_init(); + + imx53_get_boot_source(&src, &instance); + + if (src == BOOTSOURCE_NAND && + is_enabled(CONFIG_MACH_GUF_VINCELL_XLOAD)) + imx53_nand_start_image(); } imx53_barebox_entry(fdt); } +static noinline void __imx53_guf_vincell_init(void *fdt) +{ + imx5_cpu_lowlevel_init(); + + relocate_to_current_adr(); + setup_c(); + barrier(); + + imx53_guf_vincell_init(fdt); +} + extern char __dtb_imx53_guf_vincell_lt_start[]; ENTRY_FUNCTION(start_imx53_guf_vincell_lt, r0, r1, r2) @@ -162,7 +181,7 @@ ENTRY_FUNCTION(start_imx53_guf_vincell_lt, r0, r1, r2) fdt = __dtb_imx53_guf_vincell_lt_start - get_runtime_offset(); - imx53_guf_vincell_init(fdt); + __imx53_guf_vincell_init(fdt); } extern char __dtb_imx53_guf_vincell_start[]; @@ -173,5 +192,5 @@ ENTRY_FUNCTION(start_imx53_guf_vincell, r0, r1, r2) fdt = __dtb_imx53_guf_vincell_start - get_runtime_offset(); - imx53_guf_vincell_init(fdt); + __imx53_guf_vincell_init(fdt); } diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 5b648ac..d61d545 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -217,6 +217,15 @@ config MACH_GUF_VINCELL bool "Garz-Fricke Vincell" select ARCH_IMX53 +config MACH_GUF_VINCELL_XLOAD + depends on MACH_GUF_VINCELL + bool "Garz-Fricke Vincell NAND xload support" + help + The Vincell initializes SDRAM from board code. This normally limits + the image size to the size of the SoC internal SRAM. Enable this + option to be able to use bigger images when booting from NAND. Images + built with this option are no longer bootable from USB though. + config MACH_TQMA53 bool "TQ i.MX53 TQMa53" select ARCH_IMX53 diff --git a/images/Makefile.imx b/images/Makefile.imx index 0ff317b..98ddcb8 100644 --- a/images/Makefile.imx +++ b/images/Makefile.imx @@ -97,14 +97,20 @@ CFG_start_imx53_vmx53.pblx.imximg = $(board)/freescale-mx53-vmx53/flash-header-i FILE_barebox-freescale-imx53-vmx53.img = start_imx53_vmx53.pblx.imximg image-$(CONFIG_MACH_FREESCALE_MX53_VMX53) += barebox-freescale-imx53-vmx53.img +ifdef CONFIG_MACH_GUF_VINCELL_XLOAD +VINCELL_IMAGE := imx-sram-img +else +VINCELL_IMAGE := pblx.imximg +endif + pblx-$(CONFIG_MACH_GUF_VINCELL) += start_imx53_guf_vincell -CFG_start_imx53_guf_vincell.pblx.imximg = $(board)/guf-vincell/flash-header.imxcfg -FILE_barebox-guf-vincell.img = start_imx53_guf_vincell.pblx.imximg +CFG_start_imx53_guf_vincell.$(VINCELL_IMAGE) = $(board)/guf-vincell/flash-header.imxcfg +FILE_barebox-guf-vincell.img = start_imx53_guf_vincell.$(VINCELL_IMAGE) image-$(CONFIG_MACH_GUF_VINCELL) += barebox-guf-vincell.img pblx-$(CONFIG_MACH_GUF_VINCELL) += start_imx53_guf_vincell_lt -CFG_start_imx53_guf_vincell_lt.pblx.imximg = $(board)/guf-vincell/flash-header.imxcfg -FILE_barebox-guf-vincell-lt.img = start_imx53_guf_vincell_lt.pblx.imximg +CFG_start_imx53_guf_vincell_lt.$(VINCELL_IMAGE) = $(board)/guf-vincell/flash-header.imxcfg +FILE_barebox-guf-vincell-lt.img = start_imx53_guf_vincell_lt.$(VINCELL_IMAGE) image-$(CONFIG_MACH_GUF_VINCELL) += barebox-guf-vincell-lt.img pblx-$(CONFIG_MACH_TQMA53) += start_imx53_mba53_512mib -- 2.8.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox