* [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3
@ 2016-07-16 4:26 Alexander Shiyan
2016-07-16 4:26 ` [PATCH 2/3] ARM: clps711x: Sync CLK susbsystem with kernel Alexander Shiyan
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Alexander Shiyan @ 2016-07-16 4:26 UTC (permalink / raw)
To: barebox
CS3 is used for a variety of external bus devices.
Increase the wait state for this chip select for the possibility
of more widespread use.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/clep7212/clep7212.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c
index de125ea..dfdd0d3 100644
--- a/arch/arm/boards/clep7212/clep7212.c
+++ b/arch/arm/boards/clep7212/clep7212.c
@@ -30,7 +30,7 @@ static int clps711x_devices_init(void)
clps711x_setup_memcfg(1, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_8);
clps711x_setup_memcfg(2, MEMCFG_WAITSTATE_8_3 | MEMCFG_BUS_WIDTH_16 |
MEMCFG_CLKENB);
- clps711x_setup_memcfg(3, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_32);
+ clps711x_setup_memcfg(3, MEMCFG_WAITSTATE_7_1 | MEMCFG_BUS_WIDTH_32);
cfi_io = map_io_sections(CS0_BASE, (void *)0x90000000, SZ_32M);
add_cfi_flash_device(DEVICE_ID_DYNAMIC, (unsigned long)cfi_io, SZ_32M,
--
2.4.9
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 2/3] ARM: clps711x: Sync CLK susbsystem with kernel
2016-07-16 4:26 [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Alexander Shiyan
@ 2016-07-16 4:26 ` Alexander Shiyan
2016-07-16 4:26 ` [PATCH 3/3] ARM: clps711x: clep7212: Register board env during runtime Alexander Shiyan
2016-07-18 6:15 ` [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Alexander Shiyan @ 2016-07-16 4:26 UTC (permalink / raw)
To: barebox
Refactoring of CLPS711X CLK driver code to be compatible with
the current kernel. This change a bit makes easy of initializing
devices using CLKs.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/mach-clps711x/clock.c | 70 ++++++++++++++--------------------------
arch/arm/mach-clps711x/devices.c | 4 ---
2 files changed, 24 insertions(+), 50 deletions(-)
diff --git a/arch/arm/mach-clps711x/clock.c b/arch/arm/mach-clps711x/clock.c
index 6f447f7..4d6403b 100644
--- a/arch/arm/mach-clps711x/clock.c
+++ b/arch/arm/mach-clps711x/clock.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2012 Alexander Shiyan <shc_work@mail.ru>
+ * Copyright (C) 2012-2016 Alexander Shiyan <shc_work@mail.ru>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
@@ -9,42 +9,27 @@
#include <common.h>
#include <init.h>
-#include <linux/sizes.h>
#include <asm/io.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
+#include <linux/sizes.h>
+#include <dt-bindings/clock/clps711x-clock.h>
#include <mach/clps711x.h>
#define CLPS711X_OSC_FREQ 3686400
#define CLPS711X_EXT_FREQ 13000000
-enum clps711x_clks {
- dummy, cpu, bus, uart, timer_hf, timer_lf, tc1, tc2, clk_max
-};
+static struct clk *clks[CLPS711X_CLK_MAX];
-static struct {
- const char *name;
- struct clk *clk;
-} clks[clk_max] = {
- { "dummy", },
- { "cpu", },
- { "bus", },
- { "uart", },
- { "timer_hf", },
- { "timer_lf", },
- { "tc1", },
- { "tc2", },
-};
-
-static const char *tc_sel_clks[] = {
- "timer_lf",
- "timer_hf",
+static struct clk_div_table tdiv_tbl[] = {
+ { .val = 0, .div = 256, },
+ { .val = 1, .div = 1, },
};
static __init int clps711x_clk_init(void)
{
- unsigned int f_cpu, f_bus, f_uart, f_timer_hf, f_timer_lf, pll;
+ unsigned int f_cpu, f_bus, f_uart, f_timer_ref, pll;
u32 tmp;
tmp = readl(PLLR) >> 24;
@@ -70,45 +55,38 @@ static __init int clps711x_clk_init(void)
if (tmp & SYSFLG2_CKMODE) {
tmp = readw(SYSCON2);
if (tmp & SYSCON2_OSTB)
- f_timer_hf = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 26);
+ f_timer_ref = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 26);
else
- f_timer_hf = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 24);
+ f_timer_ref = DIV_ROUND_CLOSEST(CLPS711X_EXT_FREQ, 24);
} else
- f_timer_hf = DIV_ROUND_CLOSEST(f_cpu, 144);
-
- f_timer_lf = DIV_ROUND_CLOSEST(f_timer_hf, 256);
+ f_timer_ref = DIV_ROUND_CLOSEST(f_cpu, 144);
/* Turn timers in free running mode */
tmp = readl(SYSCON1);
tmp &= ~(SYSCON1_TC1M | SYSCON1_TC2M);
writel(tmp, SYSCON1);
- clks[dummy].clk = clk_fixed(clks[dummy].name, 0);
- clks[cpu].clk = clk_fixed(clks[cpu].name, f_cpu);
- clks[bus].clk = clk_fixed(clks[bus].name, f_bus);
- clks[uart].clk = clk_fixed(clks[uart].name, f_uart);
- clks[timer_hf].clk = clk_fixed(clks[timer_hf].name, f_timer_hf);
- clks[timer_lf].clk = clk_fixed(clks[timer_lf].name, f_timer_lf);
- clks[tc1].clk = clk_mux(clks[tc1].name, IOMEM(SYSCON1), 5, 1,
- tc_sel_clks, ARRAY_SIZE(tc_sel_clks), 0);
- clks[tc2].clk = clk_mux(clks[tc2].name, IOMEM(SYSCON1), 7, 1,
- tc_sel_clks, ARRAY_SIZE(tc_sel_clks), 0);
+ clks[CLPS711X_CLK_DUMMY] = clk_fixed("dummy", 0);
+ clks[CLPS711X_CLK_CPU] = clk_fixed("cpu", f_cpu);
+ clks[CLPS711X_CLK_BUS] = clk_fixed("bus", f_bus);
+ clks[CLPS711X_CLK_UART] = clk_fixed("uart", f_uart);
+ clks[CLPS711X_CLK_TIMERREF] = clk_fixed("timer_ref", f_timer_ref);
+ clks[CLPS711X_CLK_TIMER1] = clk_divider_table("timer1", "timer_ref",
+ IOMEM(SYSCON1), 5, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl));
+ clks[CLPS711X_CLK_TIMER2] = clk_divider_table("timer2", "timer_ref",
+ IOMEM(SYSCON1), 7, 1, tdiv_tbl, ARRAY_SIZE(tdiv_tbl));
- for (tmp = 0; tmp < clk_max; tmp++)
- clk_register_clkdev(clks[tmp].clk, clks[tmp].name, NULL);
+ clkdev_add_physbase(clks[CLPS711X_CLK_UART], UARTDR1, NULL);
+ clkdev_add_physbase(clks[CLPS711X_CLK_UART], UARTDR2, NULL);
+ clkdev_add_physbase(clks[CLPS711X_CLK_TIMER2], TC2D, NULL);
return 0;
}
postcore_initcall(clps711x_clk_init);
-static const char *clps711x_clocksrc_name = "clps711x-cs";
-
static __init int clps711x_core_init(void)
{
- /* Using TC2 in low frequency mode as clocksource */
- clk_set_parent(clks[tc2].clk, clks[timer_lf].clk);
- clk_add_alias(NULL, clps711x_clocksrc_name, "tc2", NULL);
- add_generic_device(clps711x_clocksrc_name, DEVICE_ID_SINGLE, NULL,
+ add_generic_device("clps711x-cs", DEVICE_ID_SINGLE, NULL,
TC2D, SZ_2, IORESOURCE_MEM, NULL);
return 0;
diff --git a/arch/arm/mach-clps711x/devices.c b/arch/arm/mach-clps711x/devices.c
index b6647de..6957431 100644
--- a/arch/arm/mach-clps711x/devices.c
+++ b/arch/arm/mach-clps711x/devices.c
@@ -14,8 +14,6 @@
#include <asm/io.h>
#include <asm/memory.h>
-#include <linux/clk.h>
-
#include <mach/clps711x.h>
static int clps711x_mem_init(void)
@@ -62,12 +60,10 @@ void clps711x_add_uart(unsigned int id)
{
switch (id) {
case 0:
- clk_add_alias(NULL, "clps711x-uart0", "uart", NULL);
add_generic_device_res("clps711x-uart", 0, uart0_resources,
ARRAY_SIZE(uart0_resources), NULL);
break;
case 1:
- clk_add_alias(NULL, "clps711x-uart1", "uart", NULL);
add_generic_device_res("clps711x-uart", 1, uart1_resources,
ARRAY_SIZE(uart1_resources), NULL);
break;
--
2.4.9
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH 3/3] ARM: clps711x: clep7212: Register board env during runtime
2016-07-16 4:26 [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Alexander Shiyan
2016-07-16 4:26 ` [PATCH 2/3] ARM: clps711x: Sync CLK susbsystem with kernel Alexander Shiyan
@ 2016-07-16 4:26 ` Alexander Shiyan
2016-07-18 6:15 ` [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Alexander Shiyan @ 2016-07-16 4:26 UTC (permalink / raw)
To: barebox
Register the board specific environment during runtime using
defaultenv_append_directory(). Also this patch updates default config.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
---
arch/arm/boards/clep7212/Makefile | 1 +
arch/arm/boards/clep7212/clep7212.c | 3 +++
.../clep7212/{env => defaultenv-clep7212}/boot/nor | 2 +-
.../{env => defaultenv-clep7212}/init/mtdparts-nor | 0
.../nv/autoboot_timeout | 0
.../clep7212/defaultenv-clep7212/nv/boot.default | 1 +
.../defaultenv-clep7212/nv/linux.bootargs.console | 1 +
.../defaultenv-clep7212/nv/linux.bootargs.debug | 1 +
arch/arm/boards/clep7212/env/init/bootsource | 9 -------
.../boards/clep7212/env/nv/linux.bootargs.console | 1 -
arch/arm/configs/clps711x_defconfig | 29 +++++++++++-----------
arch/arm/mach-clps711x/Kconfig | 1 +
12 files changed, 23 insertions(+), 26 deletions(-)
rename arch/arm/boards/clep7212/{env => defaultenv-clep7212}/boot/nor (63%)
rename arch/arm/boards/clep7212/{env => defaultenv-clep7212}/init/mtdparts-nor (100%)
rename arch/arm/boards/clep7212/{env => defaultenv-clep7212}/nv/autoboot_timeout (100%)
create mode 100644 arch/arm/boards/clep7212/defaultenv-clep7212/nv/boot.default
create mode 100644 arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.console
create mode 100644 arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.debug
delete mode 100644 arch/arm/boards/clep7212/env/init/bootsource
delete mode 100644 arch/arm/boards/clep7212/env/nv/linux.bootargs.console
diff --git a/arch/arm/boards/clep7212/Makefile b/arch/arm/boards/clep7212/Makefile
index 4b0304f..a5001df 100644
--- a/arch/arm/boards/clep7212/Makefile
+++ b/arch/arm/boards/clep7212/Makefile
@@ -1,2 +1,3 @@
obj-y += clep7212.o
lwl-y += lowlevel.o
+bbenv-y += defaultenv-clep7212
diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c
index dfdd0d3..584ecdc 100644
--- a/arch/arm/boards/clep7212/clep7212.c
+++ b/arch/arm/boards/clep7212/clep7212.c
@@ -9,6 +9,7 @@
#include <common.h>
#include <driver.h>
+#include <envfs.h>
#include <init.h>
#include <partition.h>
#include <io.h>
@@ -44,6 +45,8 @@ static int clps711x_devices_init(void)
armlinux_set_architecture(MACH_TYPE_CLEP7212);
armlinux_set_serial(((u64)serial_h << 32) | serial_l);
+ defaultenv_append_directory(defaultenv_clep7212);
+
return 0;
}
device_initcall(clps711x_devices_init);
diff --git a/arch/arm/boards/clep7212/env/boot/nor b/arch/arm/boards/clep7212/defaultenv-clep7212/boot/nor
similarity index 63%
rename from arch/arm/boards/clep7212/env/boot/nor
rename to arch/arm/boards/clep7212/defaultenv-clep7212/boot/nor
index d53f07e..f584307 100644
--- a/arch/arm/boards/clep7212/env/boot/nor
+++ b/arch/arm/boards/clep7212/defaultenv-clep7212/boot/nor
@@ -1,4 +1,4 @@
#!/bin/sh
-global.bootm.image="/dev/kernel"
+global.bootm.image="/dev/nor0.kernel"
global.linux.bootargs.dyn.root="root=/dev/mtdblock3 ro"
diff --git a/arch/arm/boards/clep7212/env/init/mtdparts-nor b/arch/arm/boards/clep7212/defaultenv-clep7212/init/mtdparts-nor
similarity index 100%
rename from arch/arm/boards/clep7212/env/init/mtdparts-nor
rename to arch/arm/boards/clep7212/defaultenv-clep7212/init/mtdparts-nor
diff --git a/arch/arm/boards/clep7212/env/nv/autoboot_timeout b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/autoboot_timeout
similarity index 100%
rename from arch/arm/boards/clep7212/env/nv/autoboot_timeout
rename to arch/arm/boards/clep7212/defaultenv-clep7212/nv/autoboot_timeout
diff --git a/arch/arm/boards/clep7212/defaultenv-clep7212/nv/boot.default b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/boot.default
new file mode 100644
index 0000000..aa244dc
--- /dev/null
+++ b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/boot.default
@@ -0,0 +1 @@
+nor
diff --git a/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.console b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.console
new file mode 100644
index 0000000..0b9dc01
--- /dev/null
+++ b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.console
@@ -0,0 +1 @@
+console=ttyCL0,57600n8
diff --git a/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.debug b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.debug
new file mode 100644
index 0000000..7106a19
--- /dev/null
+++ b/arch/arm/boards/clep7212/defaultenv-clep7212/nv/linux.bootargs.debug
@@ -0,0 +1 @@
+earlyprintk
diff --git a/arch/arm/boards/clep7212/env/init/bootsource b/arch/arm/boards/clep7212/env/init/bootsource
deleted file mode 100644
index 2f09c0c..0000000
--- a/arch/arm/boards/clep7212/env/init/bootsource
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-if [ -n "$nv.boot.default" ]; then
- exit
-fi
-
-if [ -e /dev/nor0 ]; then
- global.boot.default=nor
-fi
diff --git a/arch/arm/boards/clep7212/env/nv/linux.bootargs.console b/arch/arm/boards/clep7212/env/nv/linux.bootargs.console
deleted file mode 100644
index 77ea2ec..0000000
--- a/arch/arm/boards/clep7212/env/nv/linux.bootargs.console
+++ /dev/null
@@ -1 +0,0 @@
-earlyprintk console=ttyCL0,57600n8
diff --git a/arch/arm/configs/clps711x_defconfig b/arch/arm/configs/clps711x_defconfig
index 9312a25..d9eab56 100644
--- a/arch/arm/configs/clps711x_defconfig
+++ b/arch/arm/configs/clps711x_defconfig
@@ -1,5 +1,4 @@
CONFIG_ARCH_CLPS711X=y
-CONFIG_CLPS711X_CPU_PLL_MULT=50
CONFIG_AEABI=y
CONFIG_ARM_OPTIMZED_STRING_FUNCTIONS=y
# CONFIG_MEMINFO is not set
@@ -9,31 +8,31 @@ CONFIG_EXPERIMENTAL=y
CONFIG_BAUDRATE=57600
CONFIG_CMDLINE_EDITING=y
CONFIG_AUTO_COMPLETE=y
-CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
-CONFIG_DEFAULT_ENVIRONMENT_PATH="arch/arm/boards/clep7212/env"
-CONFIG_CMD_EDIT=y
-CONFIG_CMD_SAVEENV=y
-CONFIG_CMD_EXPORT=y
-CONFIG_CMD_PRINTENV=y
-CONFIG_CMD_ECHO_E=y
-CONFIG_CMD_IOMEM=y
-CONFIG_CMD_CRC=y
-CONFIG_CMD_CRC_CMP=y
-CONFIG_CMD_FLASH=y
CONFIG_BOOTM_SHOW_TYPE=y
CONFIG_BOOTM_INITRD=y
-CONFIG_CMD_BOOTZ=y
+CONFIG_DEFAULT_COMPRESSION_LZO=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_CMD_IOMEM=y
# CONFIG_CMD_BOOTU is not set
+CONFIG_CMD_BOOTZ=y
CONFIG_CMD_RESET=y
-CONFIG_CMD_TIMEOUT=y
CONFIG_CMD_PARTITION=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_PRINTENV=y
CONFIG_CMD_MAGICVAR=y
CONFIG_CMD_MAGICVAR_HELP=y
+CONFIG_CMD_SAVEENV=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_TIMEOUT=y
+CONFIG_CMD_CRC=y
+CONFIG_CMD_CRC_CMP=y
+CONFIG_CMD_FLASH=y
# CONFIG_SPI is not set
+CONFIG_MTD=y
CONFIG_DRIVER_CFI=y
# CONFIG_DRIVER_CFI_BANK_WIDTH_1 is not set
# CONFIG_DRIVER_CFI_BANK_WIDTH_4 is not set
-CONFIG_MTD=y
CONFIG_DISK=y
CONFIG_DISK_WRITE=y
CONFIG_DISK_INTF_PLATFORM_IDE=y
diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig
index 0853ce2..92dd51a 100644
--- a/arch/arm/mach-clps711x/Kconfig
+++ b/arch/arm/mach-clps711x/Kconfig
@@ -5,6 +5,7 @@ choice
config MACH_CLEP7212
bool "Cirrus Logic CLEP7212"
+ select HAVE_DEFAULT_ENVIRONMENT_NEW
help
Boards based on the Cirrus Logic 7212/7312 CPU.
--
2.4.9
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3
2016-07-16 4:26 [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Alexander Shiyan
2016-07-16 4:26 ` [PATCH 2/3] ARM: clps711x: Sync CLK susbsystem with kernel Alexander Shiyan
2016-07-16 4:26 ` [PATCH 3/3] ARM: clps711x: clep7212: Register board env during runtime Alexander Shiyan
@ 2016-07-18 6:15 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2016-07-18 6:15 UTC (permalink / raw)
To: Alexander Shiyan; +Cc: barebox
On Sat, Jul 16, 2016 at 07:26:19AM +0300, Alexander Shiyan wrote:
> CS3 is used for a variety of external bus devices.
> Increase the wait state for this chip select for the possibility
> of more widespread use.
>
> Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
> ---
> arch/arm/boards/clep7212/clep7212.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/boards/clep7212/clep7212.c b/arch/arm/boards/clep7212/clep7212.c
> index de125ea..dfdd0d3 100644
> --- a/arch/arm/boards/clep7212/clep7212.c
> +++ b/arch/arm/boards/clep7212/clep7212.c
> @@ -30,7 +30,7 @@ static int clps711x_devices_init(void)
> clps711x_setup_memcfg(1, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_8);
> clps711x_setup_memcfg(2, MEMCFG_WAITSTATE_8_3 | MEMCFG_BUS_WIDTH_16 |
> MEMCFG_CLKENB);
> - clps711x_setup_memcfg(3, MEMCFG_WAITSTATE_6_1 | MEMCFG_BUS_WIDTH_32);
> + clps711x_setup_memcfg(3, MEMCFG_WAITSTATE_7_1 | MEMCFG_BUS_WIDTH_32);
>
> cfi_io = map_io_sections(CS0_BASE, (void *)0x90000000, SZ_32M);
> add_cfi_flash_device(DEVICE_ID_DYNAMIC, (unsigned long)cfi_io, SZ_32M,
> --
> 2.4.9
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Industrial Linux Solutions | http://www.pengutronix.de/ |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-07-18 6:16 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-07-16 4:26 [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Alexander Shiyan
2016-07-16 4:26 ` [PATCH 2/3] ARM: clps711x: Sync CLK susbsystem with kernel Alexander Shiyan
2016-07-16 4:26 ` [PATCH 3/3] ARM: clps711x: clep7212: Register board env during runtime Alexander Shiyan
2016-07-18 6:15 ` [PATCH 1/3] ARM: clps711x: clep7212: Increase the wait state for chip select 3 Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox